Has anyone had a problem with the new Terms of Use acceptance?

I received the message the they have upgraded the Terms of Use and I try to click OK.  It states, "There was a problem updating your account."

Here's what others have done successfully to work around that problem: In your Web browser, go to Photoshop.com and log in.  You should be asked to accept the Terms Of Use.  Once you have, then you won't have any issue with accessing Photoshop.com from PSE.

Similar Messages

  • Has anyone had a problem with the letters literally rubbing off the keyboard?

    Has anyone had a problem with the letters actually disappearing from the keybord, like being gradually rubbed out? My macbook air had this problem one year after purchase. They fixed it for free. Now, a year later, I have the same prob. Apple doesnt want to know.
    I would be delighted with any suggestions, reactions etc. thanks in advance.

    I don't have to be doing anything or be anywhere near the computer.
    The machine feels warm but i don't know if thats normal or not.
    Imac, 20-inch,mid 2007
    Processor 2 GB  intel core 2 Duo
    Memory 2 GB 667 MHz DDR2 SDRAM
    Graphics ATI Radeon HD 2400 XT 128 MB
    Software OS X 10.8.2 (12C54)
    No third party extensions that Iknow of

  • Has anyone had a problem with the iPhone 4 becoming unresponsive as a call is being received?

    Has anyone had a problem with the iPhone 4 becoming unresponsive as a call is being received?

    I'm sure someone has.

  • Has anyone had any problems with the 10.0.3 upgrade?

    I'm running WinXP and presently have Adobe Reader 9.4.3.  Before I upgrade I would like to find out if anyone has had any problems with the new release?  The last time I upgraded an Adobe product (Flash) it screwed up my ability to watch videos on my browser.
    Any information would be appreciated.
    Thanks,
    Spin45

    Adobe Reader has the original 10.0.0 with its associated vulnerabilities and the patch of 10.0.1 which seems unable to run in protected mode in my environment or any that have roaming profiles.  The vulnerabilities that prompted the last two patches (would have been 10.0.2 and 10.0.3) have been forgone by Adobe, because "Protected Mode mitigates those vulenrabilities".  See here:  http://www.adobe.com/support/security/bulletins/apsb11-06.html
    and here: http://www.adobe.com/support/security/advisories/apsa11-02.html
    In my opinion, Reader X is not ready, they are soliciting for testers for a new release.  Version 9 with its attendant problems seems to be the only viable solution for me, if I can get the patches to apply properly, and the installer to work properly.

  • Has anyone had a problem with the spotlight search not working sometimes?

    Has anyone had a problem with their "spotlight search" not working? If I restart the phone it will work for a few days then not work again.

    It's more likely the OP's router.  I have a wifi only iPad 2, yet location services work just fine on my iPad.  If I open maps, my location is found quite nicely.  I have seen that some routers do not provide location services and I suspect the OP has such a router.

  • Has anyone had any problems with the latest upgrade for iPad?

    I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
    Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.

    bobtheblob wrote:
    Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
    That's probably a good idea.  If you are happy with the system as is, I'd wait to upgrade.  I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems. 
    As the old saying goes, if it ain't broke, don't fix it!

  • Has anyone had a problem with the ipod mini after update

    I just installed mac os 10.4.3 system update after the installation of this update ny ipod stop responding to the computer
    has anyone experianced this problem it wont even let me reset the ipod i have tried over and over again

    If you really find an answer to your question, you should search through these boards. A LOT of people have problems with their minis and Nanos after they download updates. Some people don't even bother with the updates.
    My suggestion? Delete the update you just downloaded and download the version before that one. See if your iPod responds to your computer.

  • Has anyone had a problem with the imac just shutting off for no reason

    My imac will just shut off without warning.Has anyoneelse had this problem?

    I don't have to be doing anything or be anywhere near the computer.
    The machine feels warm but i don't know if thats normal or not.
    Imac, 20-inch,mid 2007
    Processor 2 GB  intel core 2 Duo
    Memory 2 GB 667 MHz DDR2 SDRAM
    Graphics ATI Radeon HD 2400 XT 128 MB
    Software OS X 10.8.2 (12C54)
    No third party extensions that Iknow of

  • Has anyone had any problems with their PSDs getting corrupted using CS6 on an iMac?

    I  bought my iMac (Refurbished 21.5-inch iMac 2.9GHz quad-core Intel Core i5) in February. Installed CS6 and other programs including fonts I normally use. Last night though, as I was saving my layouts to PSD and JPG, I noticed the graphics were corrupted and had funky neon lines and converted my white coloured text to black! I restarted my computer, changed the colours back to white, re-saved and they (gladly) turned out normal again. I've never had this problem with my CS5 in my 2009 Macbook Pro. I was told by a friend that it could be the fonts I installed.. So I validated my fonts, removed the ones with the yellow warnings.. but I'm just worried this will happen again if I can't resolve the problem properly. I have no clue how to resolve this. Thoughts? Help?

    Hi Make an Appointment at Apple Store maybe a battery fault. Cheers Brian

  • Has anyone had any problem with the multi choice tick boxes on a windows computer?

    I have just created a form with check boxes on my iMac, emailed it to a windows based account and found that the check boxes don't work in windows explorer. Has anyone else had this problem?

    If your Mac is truly running MacOS 10.2.x, you are limited to using 128-bit WEP security - WPA is not supported.
    On the Linksys router, select 128-bit WEP and enter a passphrase. The router will generate, from the passphrase, four hexadecimal-format WEP keys. Copy down the FIRST of those four WEP keys - and use that WEP key on your Mac when prompted.

  • Has anyone had a problem with the power cord to a Macbook Pro?

    I've had three power cords go bad, Apple claims its mis-use, I've been very careful. Anyone else had this problem? How can I gat a free replacement?

    I have the same problem with my iPad 1. Have you found a fix?

  • WEIRD! Has Anyone had this problem with the keyboard ribbon cable? HLP! PLS

    Replacing a DVD drive and using ifixit to reassemble the unit; the PB 1.67 Ghz wont turn on--nothing.
    After 3 days of troubleshooting I finally found that pressing the keyboard ribbon cable to the logic board very firmly while pressing the power button starts it.
    Nothing else works. When I release the pressure the PB works fine after start however the power switch doesnt work again (for an emergency manual shutdown or to boot the PB again). Tape doesnt work.
    This connection is only a small friction fit connector. Ive cleaned the area, compressed air cleaned and close inspection shows no visible problems I can see.
    Has anybody experienced this and how do I fix it? I cant open the PB every time I want to boot it!
    Steve

    Hi, Steve. I don't have an answer for your faulty connection, but as for workarounds, there is seldom a need to shut a Powerbook down and then boot it up using the power button. I recommend that you stop shutting down as a matter of habit, and instead just put the Powerbook to sleep (using the command in the Apple menu) when you aren't going to use it for a while.
    I could easily count on my fingers and toes the total number of times my Powerbook has been shut down since I bought it four years and ten months ago. It runs 24/7/365 except when I'm working on something inside it. For all other purposes, a software Sleep or Restart command suffices, and I don't need the power button for those. You should be able to reduce your need for that button just as drastically.

  • Has anyone had a problem with the screen saver not coming on?

    My preferences settings are as follows:
    Energy
    Computer sleep: 15 min
    Display sleep: 15 min
    Desktop & Screen Saver
    Start screen saver: 5 min

    hi Thank you so much for your reply. I swear with every Apple product every time there is a problem with a product it acts up at home but at soon as I get to the store everything is resolved. There is no longer a problem. I end up looking like someone who is trying to hassle the employees. I will test it out for a little longer to see if it might improve.

  • Has anyone had a problem with the menu button

    recently my menu button on my i-pod touch is acting weird, i have to press it a couple of times for it to work or in a certan spot. does anyone else have the same problem? Last night it wasn't working at all but it has gotten better but i still need to press it like 3 or 4 times for it to work.
    Message was edited by: crzypunk2004
    Message was edited by: crzypunk2004

    I think they mean the home button. Have you dropped your iPod or possibly have gotten crumbs/sand or something small into the button? This happened with my friend's iPod nano last year. She went to the beach and got sand stuck in the center button and now she has to press that button 4 or 5 times to get it to work. Unfortunatley I don't know how to fix this, but I hope this helped a little bit.
    Good luck!

  • TS3274 has anyone had a problem with the on/off button being stuck down?  my IPad is on, but the power button is stuck down and I cannot power off

    I have and IPad 2.  I realized (while travelling by air) that my power button was stuck in the down position.  I cannot power off my IPad.  Wondering if anyone has experienced the same issue and what you may have done to rectify?  I think Apple may be aware of this problem.  I stopped into an Apple store and they were not supprised, but I could  not make an appt because I was traveling and did not live in the area.  Thanks for any ideas.

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

Maybe you are looking for

  • About selecting single column in a alv table.........

    Hi Experts, I need single column to be selected from a ALV table...selected in da sense to be highlighted....as it happens..by default for a row..... I hope u understood my query... Please help me out in this.. I know u all will surely help me... Thk

  • File sizes saved in MAC much bigger than saved in PC-is there a fix?

    HI everyone - I searched and couldn't find an answer for this specific issue so Im hoping I can be pointed in the right direction.  Appreciate any help with this issue. About a month ago got a MAC (I upgraded everything and have 12GB RAM so I know it

  • Does anyone know anything about embedded compilers?

    That is: compilers reflected by a java class (besides java.lang.Compiler) that have thorough error messages.

  • Drag and Drop to Dock not working

    Hi, I'm using Mac OS X v10.6.8 I used to have the Transfers folder on my Dock next to Aplications but for some reason it dissapeared from there. I tried to put the Transfers folder back on the Dock by opening Finder, going to the Transfers folder and

  • How far ahead does calendar sync work?

    Does anyone know how far ahead the calendar sync works? Or is it limited to a certain number of entries - if so how many?