Has anyone had any experience with iDVD and latest release of iMovie?

Trying to get latest version of iMovie (version 10.0) burned to iDVD.  Any help is greatly appreciated!

Go to File>Share>File, choose the size (probably should choose either SD or Large) then click Next, give it a name, then click Save.
Go to iDVD. Go to File>Import>Video and select the file you just created. It will bring the video into your iDVD project.

Similar Messages

  • Has anyone had any experience with using 'MacKeeper'?

    Has anyone had any experience using 'MacKeeper'?

    I am afraid its worsen then THAT!!. I bought two licences from those fraud spammers, liftetime with "satisfaction or moneyback guarentee".
    Both my Imac and MacPro kept crashing after installing it. All the helpdesk from zeobit did for me was sending me mails i should re-install osx and mackeeper.
    When that didnt help, the gave in. I asked my money back, as in the guarentee. Thet denied flat out. "Sir this is not OUR software causing the problem, but OSX. Go there with your complained!"
    Alsoo there newsletter......i UNLISTED 9 times now and still i get 5-8 spam mails a week.
    It´s a fraud a company !!
    Swindlers!! Alsoo see :
    https://discussions.apple.com/thread/2786697?start=0&tstart=0

  • I have an iMac 27" which is 4  years old and probably overdue for a clean-up. Is there any good reliable software out there that would help? Has anyone had any experience of 'Mackeeper'?

    I have an iMac 27" which is 4  years old and probably overdue for a clean-up. Is there any good reliable software out there that would help?
    Has anyone had any experience of 'Mackeeper'?

    Check how many applications are starting when you log in, I found that if there was a lot of activity at login Finder did not display the icons on the desktop correctly, again like you it did not occur at every login, just occasionally.
    For Safari have you tried resetting Safari, if that does not help you could disable plugins and extensions one at a time. You may find one of those is causing the problem.

  • Has anyone had any problems with fusion drive?  If so, what kind of problems, and were they easily corrected?

    I'm looking at buying a new computer.  Has anyone had any problems with fusion drive on iMac?  If so, what kind of problems, and were they easily corrected?

    NOPE!
    I better not!  My iMac is only a week old.  And, if I did have any problems with it, I would let Apple deal w/it!  I do not troubleshoot when I'm under warranty.  That's Apple job!

  • Has anyone had any problems with their charger blowing out?

    Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
    I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
    Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
    Any advice would be much appreciated.

    Everything in the box with iPhone is covered by the iPhone warranty ,go  to Apple genius bar before warranty expires

  • TS1702 Has anyone had any issues with the app scramble with friends after updating to iOS 6. The touch screen is not responding properly when selecting the tiles but worked fine before the update

    Has anyone had an issue with the app scramble with friends after upgrading to iOS 6. Tapping the screen will not select the tiles and hold them.

    Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

  • Has anyone had any problems with the latest upgrade for iPad?

    I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
    Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.

    bobtheblob wrote:
    Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
    That's probably a good idea.  If you are happy with the system as is, I'd wait to upgrade.  I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems. 
    As the old saying goes, if it ain't broke, don't fix it!

  • SOLVED - Has anyone had any problems with xorg 1.11.14-1?

    Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
    I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
    Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
    For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
    TIA
    Last edited by Roken (2012-02-06 00:30:59)

    Any idea where the problem was?
    X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
    (Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
    Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
    Last edited by sas (2012-02-07 16:02:50)

  • Has anyone had any problems with the 10.0.3 upgrade?

    I'm running WinXP and presently have Adobe Reader 9.4.3.  Before I upgrade I would like to find out if anyone has had any problems with the new release?  The last time I upgraded an Adobe product (Flash) it screwed up my ability to watch videos on my browser.
    Any information would be appreciated.
    Thanks,
    Spin45

    Adobe Reader has the original 10.0.0 with its associated vulnerabilities and the patch of 10.0.1 which seems unable to run in protected mode in my environment or any that have roaming profiles.  The vulnerabilities that prompted the last two patches (would have been 10.0.2 and 10.0.3) have been forgone by Adobe, because "Protected Mode mitigates those vulenrabilities".  See here:  http://www.adobe.com/support/security/bulletins/apsb11-06.html
    and here: http://www.adobe.com/support/security/advisories/apsa11-02.html
    In my opinion, Reader X is not ready, they are soliciting for testers for a new release.  Version 9 with its attendant problems seems to be the only viable solution for me, if I can get the patches to apply properly, and the installer to work properly.

  • Has anyone had a issue with itunes and windows 8.1?

    I upgraded to Window 8.1 and now when I plug in my ipod nano gen 4 I get a message that says "ipod detected but it could not be identified". It also does not recognize my iphone 4. Microsoft says it is an itunes driver issue that is not compatible with the 8.1. Has anyone experience this?
    thanks.

    https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment

  • Has anyone had any problem with the multi choice tick boxes on a windows computer?

    I have just created a form with check boxes on my iMac, emailed it to a windows based account and found that the check boxes don't work in windows explorer. Has anyone else had this problem?

    If your Mac is truly running MacOS 10.2.x, you are limited to using 128-bit WEP security - WPA is not supported.
    On the Linksys router, select 128-bit WEP and enter a passphrase. The router will generate, from the passphrase, four hexadecimal-format WEP keys. Copy down the FIRST of those four WEP keys - and use that WEP key on your Mac when prompted.

  • Has anyone had any problem with Linksys?

    I haven been trying to connect to my Linksys with speedbooster and I can't figure it out. My entire life I have never used an apple computer.
    I have called the Linksys support people and they tell me the same thing: "We don't provide support for apple computers." That's great hugh?!!
    I am able to connect to the router without a WAP or WEP password but I don't want to leave a free signal around my area.
    This routers come with different WAP codes, also with Radial and WEP that is hard to know which one is the right one.
    Do you guys have any idea how I could be able to solve this problem? Has any of you guys have encounter something like this with Linksys?

    If your Mac is truly running MacOS 10.2.x, you are limited to using 128-bit WEP security - WPA is not supported.
    On the Linksys router, select 128-bit WEP and enter a passphrase. The router will generate, from the passphrase, four hexadecimal-format WEP keys. Copy down the FIRST of those four WEP keys - and use that WEP key on your Mac when prompted.

  • Has anyone had any problems with their PSDs getting corrupted using CS6 on an iMac?

    I  bought my iMac (Refurbished 21.5-inch iMac 2.9GHz quad-core Intel Core i5) in February. Installed CS6 and other programs including fonts I normally use. Last night though, as I was saving my layouts to PSD and JPG, I noticed the graphics were corrupted and had funky neon lines and converted my white coloured text to black! I restarted my computer, changed the colours back to white, re-saved and they (gladly) turned out normal again. I've never had this problem with my CS5 in my 2009 Macbook Pro. I was told by a friend that it could be the fonts I installed.. So I validated my fonts, removed the ones with the yellow warnings.. but I'm just worried this will happen again if I can't resolve the problem properly. I have no clue how to resolve this. Thoughts? Help?

    Hi Make an Appointment at Apple Store maybe a battery fault. Cheers Brian

  • Has anyone had any issue with opening a new tab and the address bar not connecting to websites in 33.1.1?

    I think ever since we moved to v33, I've been having an irritating issue that whenever I open a new tab that isn't connected to a website yet and try to enter a website address, it won't connect to ANY website. Doesn't matter if I hit Enter to try to make it go, doesn't matter if I click the right-pointing arrow button to make it go, doesn't work. I can go into a tab already connected to a website, type in a new website there and it'll create a new tab and take me to the new website, but not if I use new tab button.
    Anyone else had this issue? Any fixes?

    Sorry, that didn't help as I'm able to connect to websites, just not in a particular way.
    For instance, I am able to type in and connect to websites IF the tab is already in use with a website (i.e. if I were to type "yahoo.com" in the address bar of this tab FF would open a new tab and take me to yahoo.com) but not when it is a completely new tab.

  • HT5137 Has anyone had any trouble with apps disappearing and then not being able to re-install them? 5s

    A lot of my apps have disappeared and I can't re download them. Matter of fact I can't download anything from the app store

    god, i love it when i find answers to my own questions!  here is a work-around, not really a fix because you have to run this daemon that constantly performs read operations to prevent the drive from going into low power mode - which seems to be the source of this problem.  caution: this will drain your battery if you leave computer awake while not plugged in, but this solution darn well beats the issues i was having before with spinning beachball every couple minutes.. i was going crazy!  it only eats about 2-3% of cpu usage and i have not had the problem since i installed this daemon which sits in Library\LaunchDaemons (if you want to remove it later.)  also the developer leaves his email in the install file and he is very helpful.
    here is a link to the crucial thread where i found this solution:
    http://forum.crucial.com/t5/Solid-State-Drives-SSD/M4-512gb-Macbook-Pro-15-i7-2- 3-2011/td-p/45848/page/12
    here is a link to the file itself:
    download here

Maybe you are looking for

  • Formatting Totals in OBIEE 11g

    Hi, we have a requirement to format the totals of a table in obiee 11g. When I format the totals, the formatting selections I made is not applied for all the entire totals section. If the table has more than one dimension values in it, the formatting

  • Help on displaying Repeat Header Rows

    Hi All, I have a table where i need to repeat each header per page But i there's one value that i need to display on the first page only.: given the following repeat each header per page: page 1 header product1 product2 product3 page 2 header product

  • How To Delete a Row From a TableView !!!!

    Hi, Does any know how to delete a row from a table view model. I have a TableViewModel being displayed, when the user select the particular row and click delete i want that particular row to be deleted. Any Suggestions How. Thanks, Emmanuel.

  • Authorization for MM

    Our business scenario demands that a particular user should be able to access the T.code"Me23n(Display P.O)" but shouldn't be able to view condition tab in the "item detail",how to set up the authorization for this, please mention the detailed steps.

  • Creating a new database with exporrt file

    Hi there, I am to create a new database with an export file. I have the export file (exp) and the new environment set up (Oracle10g on UNIX) Can someone gimme some guide lines and what I might probably face and new to correct. Regards.