Has anyone had problems with burner after upgrade to Mavericks on an iMac 27"

Has anyone had a problem with the burner after upgrade to Mavericks.  It is hunting not always reading picture files keeps showing a fault when trying to burn a DVD. 

I am having the same experience.  I just update this morning and now can't get mail.  Did you ever figure this out?

Similar Messages

  • Has anyone had problems with email after the IOS 5 update

    I updated my phone to the IOS5 on Thursday and can't get emails from my yahoo account.  i have deleted the email account from my phone and the added it back to start over and nothing.  I am completly lost as to how to solve this problem, but I want m email back.  Has anyone else had this problem.

    I am having the same experience.  I just update this morning and now can't get mail.  Did you ever figure this out?

  • Has anyone fixed problems with OIS after upgrading to iOS 8.3?

    MY camera worked absolutely fine on my 6 Plus until I upgraded to 8.3 at which point my rear camera won't focus.
    I Can't downgrade to the previous version so how do I fix it?

    I would recommend backing up your device to iTunes or iCloud and doing a recovery mode reset. This will remove the software and then readd it on there this will fix any glitches that may have occurred during your iSO update.
    Do keep in mind if you are updating your device via Wi-Fi and it is not a good connection this can cause the update to pause/resume and this can cause issues with the iSO update going threw successfully.
    You can use this article for guidance!
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

    Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

    iphoto upgrading: Apple Support Communities
    iphoto upgrade hangs: Apple Support Communities

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • HT201272 Has anyone had problems with their apps downloading to their ipods?

    Has anyone had problems with their apps downloading to their ipod? Or know why all apps have been removed from their ipod?

    Possibly, but what problems?  Any errors?
    If you are really running iOS 3.1.2 as your signature suggests, that is likely the issue.  Many apps now require iOS 4.3 or higher.

  • Has anyone had problems with Domayne using generic third party RAM for memory upgrades? My RAM is now faulty and had to be removed, but Apple wont replace it under Apple Care because its not a genuine component?

    The computer was purchased in the knowledge that all components and hardware were genuine and subsequently covered by the Apple Care warranty.
    Domayne replaced the genuine components (8GB stick) with generic components (2x 16GB sticks) to save money and boost margin.
    Apple should not allow this misleading, profiteering behaivour. This behaviour is brand damaging. Apple must maintain more control over their supply chain.
    Has anyone had any expirenece with this problem?
    Has anyone made Domayne or other third party resellers acountable for this misleading behaviour?
    Thank you.

    Stick with Brand name RAM and reputable distributors.  Mac is finicky about low quality RAM
    Try OWC http://www.macsales.com/
    Crucial http://www.crucial.com/
    Most RAM comes with Lifetime guarenntee so return it where you got it.

  • Has anyone had problems with the out of the box windows adapter

    Hello all,
    If I run a trusted reconciliation from our student records system to a group in OIM, that has an access policy thet provisions home directories on a windows server, some home directorys are created, but not all. Usually the Windows connector makes the provisiong run fail.
    We are successfully provisioning:
    1) Student records system trusted recon to IDM
    2) Active directory and exchange
    3) Blackboard (virtual learning environment)
    Unsuccessfully provisioning
    1) Windows
    Has any one else had problems with windows adapter?
    Thanks
    Dave.

    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 20 Seconds...
    Turn the Phone On...

  • HT4623 Has anyone had problems with texing

    I have had problems with texing when I open a tex then send it the person I texed never gets but someone els does

    I've not had a problem with texting.  Thanks for asking.
    If YOU do, contact your carrier.

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

  • Problems with passwords after upgrade to Mavericks

    Hi,
    After upgrading to Mavericks I have problems with passwords. MacOS allows me to log in with my password but when I want to install software it does not accept my password. I can go to the user tab in system preferences and change my passwort there. With the new password it works, but when I change to the old password, I have the same problems. Strange ...
    Thanks for help

    OK. I found the problem (probably it is not related to the upgrade): When I install an application and the installation procedure asked me for a password it switched the keybord driver to a language I only use infrequently. Since my original password contained special characters the change of the keyboard driver was the cause for my typing in a wrong password. When I tried changing the password I used "abc" and this worked since it did not contain any special characters. So everything explained and a bug for Apple to fix.

  • Has anyone had problems with Apple TV after updating iTunes to 11.0?

    My Apple TV has worked well for over a year with home sharing and also mirroring from the iPad . This week I was instructed to update iTunes with 11.0. Since then the Apple TV with mirror the iPad but if I try to take a video to large screen it just stops. Is there a simple solution?

    i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

  • Has anyone had problem with Yosemite upgrade in mac air startup?

    Since Yosemite upgrade my Mac Air has been slow to start up compared to to previous OS's.  I have been patient in waiting for a fix or an explanation.  If it is an accepted startup procedure, ok, but explain it.  The sales pitch still sell the notebook as a quick startup, a second.  Please advise if it is mine or an accepted OS quirk.  Thank you.

    Hanna,
    Is this a slow white progress bar on a black screen boot slowness, or afterwards, including while the Desktop appears?
    I suggest looking into your System Preferences > Users & Groups > Login Items tab. See if Safari is in the list, or something that wants to open a web link, and this launches the browser. You can remove these with the - button below the listing.
    I have a 2014 MBA that was upgraded from Mavericks to Yosemite 10.10.1. It didn't boot in a second with Mavericks either. That is an unrealistic boot performance expectation. It does however boot to a Finder Desktop within 12 seconds, and that is good enough for me. Wake from Sleep is one second.

  • Is anyone having problems with keynote after upgrading to Lion?

    After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

    Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

Maybe you are looking for

  • Itouch cannot be restored message

    when attempting to update software on itouch on my PC when itunes crashed.  Then it told me that i need to restore the itouch to factory settings.  I attempted to do that and it made it all the way to the end of the restore and then said it cannot be

  • File name possible ?

    Hi, Is it possible to have a file name like ABCtimestamp.dat.KT  in FTP channel. I cannot use graphical mapping for that. Thanks

  • Accessing Other services

    I've finally gotten the process down so that I can create packages for deployment, but now I'm faced with a concern. I was under the impression that we were to have access to all the applications that were listed on the Adobe Creative Cloud web page;

  • Upgraded to Lightroom 5.6: Suddenly "Server Busy" dialog delays my startup for minutes

    I upgraded to the latest 5.6 a month or so ago (whenever it came out I guess) and this "Server Busy" dialog loop when starting Lightroom started occurring shortly thereafter.  If I repeatedly click "Try Again" or "Switch To" things eventually start t

  • Trying to get ricochet mechanics to work, need help!

    Hey, for a project I'm doing, I'm making a ricochet game with Actionscript 2.0, where the player shoots a bullet and it bounces off objects trying to hit the opponent. It's working decently so far, but my problem is I'm having a VERY hard time gettin