Has anyone solved itunes skipping?

I posted a little while ago about this problem and it seems I was not the only person experiencing the problem of itunes sounding like a skipping cd. A number of different suggestions were made, and I've gone through all of them to no avail, and want to know if anyone knows how to actually solve this problem.

I uninstalled all of the Apple software on laptop, restarted the laptop and reinstalled the latest iTunes download.
iTunes then started working and I didn't get the message.
But I've just installed Quicktime to get my iTunes videos working and now I get the error message again

Similar Messages

Has anyone solved the privilege error message in iTunes?

Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.

Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847

My apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

my apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

I solved that particular problem for myself (although I am running iTunes 11 under Snow Leopard on an iMac) by deselecting one of my Users Admin. privs. You see, I had two users w/admin privs & iTunes now plays nicely when there is only one admin.
Otherwise, I would keep getting stuck in an "infinite loop" of resetting passwords over & over and still iTunes was a mess - albeit on an intermittent basis which was absolutely driving me nuts!
I also think that firing up Safari and signing into my account @ apple first seems to help; providing that an apple cookie gets placed in my machine before I go to the iTunes store and enjoy surfing around there.
Anyways, good luck~

I too am getting the tritone sound every day at 2 17 pm with no message or notification on my 4s, has anyone solved this problem yet since 09? thanks

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

Has anyone solved the "garbled characters" issue i...

When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
Zürich appears as: Zã¼rich
München appears as: Mã¼nchen
Liège appears as: Liã"ge
I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
Has anyone solved this extremely annoying issue?
Thx

I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
Finally, after playing with it some more I found a simple solution which should work for everyone:
***** SOLUTION *****
1. Enable internet access in Nokia Maps application (set it to When Needed).
2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
4. Put the card back in the phone if you extracted it and start Nokia Maps.
5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
6. Now codepage should be correct and all names become readable.
This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
Message Edited by ankor85 on 09-Jan-2008 09:02 PM

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

scottkb2000 wrote:
I'm confused. I just got an email from Apple Support Community (updates) and I see that a "baltwo" response is marked "This solved my question" (no offense directed towards baltwo). The question just seems to be more defined, not resolved. This is an Apple OS problem (seemingly) and needs to be directed towards a technical representative, not the community. I would ask that if anyone knows how to push this issue towards Apple, that is where the solution lies.
File a bug report with Apple via feedback. Do note that this goes through marketing and sales. No telling when it'll get to engineering. Alternatively, if you want to report this issue directly to Apple's engineering, bypassing marketing and sales, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering and you'll be able to track its status.

Apple tv 2nd gen won't wake up mac has anyone solved this yet?

apple tv 2nd gen won't wake up mac has anyone solved this yet?

Why Does it need to wake the mac?

Has anyone solved error 403?

I'm using a Mid 2012 MacBook Air and have recently upgraded to 10.10. I have been using iCloud for a few years now and after upgrading to 10.10 I have been receiving an error message in my Calendar, specifically;
II can't solve this problem because I do not know what "403" means, it's a very opaque way of describing a problem. Now, I know that i'm not the first person to encounter this as I have found many other reports on these forums about this error, but for the life of me I can't find a solution to this error.
So my question is, has anyone got a solution to this error?

Michael,
An update on the ongoing superdrive error:
At the time I responded to your post, I was burning DVD+Rs because my superdrive didn't like -Rs very much and would error out on them. Yesterday, to test my theory on Disk Warrior, I bought some DVD-Rs and burned about 3 in a row successfully before I got the 0x80020022 error again. I ran Disk Warrior again and have been burning the -Rs consistenty (I have a lot of junk to archive off my HD.) But I thought that the type of media might be important to the conversation because the superdrive appears to like one type of DVD blank over another.
Some key points:
1) You said you're using a Mac Mini as your bootup disk. I am using a MacBookPro. This may be significant.
2) Because the error reappears routinely, this is by no means a complete fix. It needs to be repeated when the error reappears. However, in lieu of a more permanent solution, I'll take one that appears to work, even temporarily, until Apple or somebody out there can tell us how to fix this more permanently.
3) Because it appears to be fixed after running Disk Warrior, I am going to conclude that it is a software error, one of the operating system not communicating with the superdrive, and has little or nothing to do with the drive or the media, as I've read on other forums regarding this error. Of course, if your drive really has gone bad, who's to say that it won't prompt the same error, if it is an all-purpose error. I had my superdrive replaced last year, so I'm pretty sure it's not the drive.
Jim

Has anyone solved the car integration problem with iOS8?

iOS8 broke my car radio's ability to control my iPhone to play music. I use USB, but many people in this community also suffered this over Bluetooth.
Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
Has anyone figured out a permanent fix?
Does Apple acknowledge this bug?

Afraid start up is still rough. Even more button pressing required to access. Some apps still reluctant to open. Either slow or simply won't open.
THanks for your comments.

Has anyone solved their LR4 / Nikon D800 RAW NEF issues?

I've done a lot of reading on this topic and think I have a handle on how easily the new D800 NEF files can be corrupted by the older versions of Nikon Transfer.
When I began using the camera I accidently made the mistake of corrupting them and haven't had any issues since... until yesterday.
I photographed last night, and imported about 160 RAW NEF files onto my brand new Macbook Pro with Retina for a same day preview for the host. I transfered the images using ViewNX2 & by association it's built-in Nikon Transfer 2 utility. I used the built in SD Card reader on the Macbook which has always worked in the past. But alas!!!!! While they imported fine, LR4 can't import them and gives me the error "Preview Unavailable at this Time". I should note... Nikon Transfer 2 was set to clear the card after the transfer .
Nikon ViewNX2 can see the images and I'd hoped to fix the issue by just converting them to JPEG's but, no bueno. It tells me it can't. This is the precise issue I can into when I accidently used the original version months ago on my iMac. But it's impossible that I have the old version on this unit. It's less than a month old and I'd downloaded the most recent version from Nikon. So I'm running under the assumption that the file is somehow corrupted.
I've seen a lot of people running into issues getting used to the new workflow requied to deal with these enormous RAW's.
Here's the all important question. After the files have an issue... is there anyway to recover them??? I can't retake them, the original shots were wiped from the card. So what do I do? At least Nikon View can see them, so I have to believe that there is some image information there.
Has anyone sucessfully fixed the issue?
Going forward I plan to just import everything directly through LR4, so I think that'll aliviate future heartburn... but what's my "undo" solution?
I know there's a lot that's been written on this topic and really appriciate the support!
-Jared

What Bob Frost just posted (after fixing the hidden http// part of the URL) worked for the image you uploaded, so try that:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
BTW, I answered 14 to the bit-depth-12-or-14 question the utility asked, and it worked ok on the example corrupted NEF.
Below is what I was typing up and testing before posting, and works to extract the embedded JPG Preview, but does not actually fix the corrupted NEFs, which is a better solution. I am including it, below, for reference in case someone without corrupted NEFs also wants to extract JPGs from their raw files. It uses the same tool from Phil Harvey without his customizations to work specifically with corrupted NEFs.
== Original Message ==
The raw data in the NEF you uploaded appears corrupted or otherwise unusable because when viewing in Windows Explorer using the latest Nikon NEF Codec that supports the D800, all I see is a small thumbnail then black with a few parts of color, however for that one file, at least, the embedded JPG preview is intact, and 7360 x 4912 in size, enough to see the camera-shake blur.
https://dl.dropbox.com/u/9905000/JBR_20120910_175757.jpg
I’m on a PC and you’re on a Mac but the same tool is available - exiftool a command-line program you run in terminal (on a Mac) or in a Command Prompt window on a PC:
http://owl.phy.queensu.ca/~phil/exiftool/
If what you download includes a (-k) then remove it by renaming before attempting to run the command, below. On Windows I would rename exiftool(-k).exe to exiftool.exe without the (–k) part. The (-k) tells exiftool to display the exif information by default if you drag-and-drop to it. While this is normally useful, for the purpose of extracting JPGs from NEFs this might be confusing so I’m suggesting to rename the executable before using it.
Here is the command-line to extract the fullsize JPG from the NEFs and then copy the metadata tags from the NEF to the newly written JPG:
.\exiftool -b -JpgFromRaw -w %d%f_%ue.jpg -execute -tagsfromfile @ -srcfile %d%f_%ue.jpg -overwrite_original -common_args --ext jpg .
The above command assumes both the exiftool executable and all the NEFs are in the current folder. The current folder is designated by a single period both at the very beginning and the very end of the command-line. If exiftool is in a different folder, then supply that path instead of the initial period, and if the NEFs are in a different folder, substitute that folder-name for the final period. The final period has a space separating it from the preceding –ext jpg.
It is also assumed that only NEFs and the executable are in the current folder. If there are other files, they may confuse things so you might want to move things to a temporary working folder, and I’d suggest working with a copy of the NEFs just in case something goes haywire, you’re not overwriting the originals, corrupt as they may be.
For reference, the above command-line was simplified from a more complex example that didn’t quite work with your file, one that conditionally extracts either the full-size JPG or the tiny JPG-thumbnail. The example is the last one in the Copying Examples section, here:
http://owl.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#copying_examples

Has anyone solved the Yosemite and WebEx issue

Ever since upgrading to Yosemite, my WebEx service has become unstable, I get varying issues from complete failure to connect, to bouncing WebEx icon on my tray, through to occasional connectivity. This issue seems to be well known, certainly within my office I am not alone with this issue. Apparently, there is an issue with Pac files and how Yosemite interacts. Has anyone found a fix for this ?

So why won't my password work?
A quote from another thread:
"Long story short the Apple Genius Bar rep told me that they KNOW it's a software flaw, but unfortunately, they have no way to fix it, other than restoring my phone to factory settings" (https://discussions.apple.com/thread/3407403?start=15&tstart=0)
I am not the only one with this problem. I was hoping someone had a solution or even a helpful suggestion.

Has anyone solved the iPod touch and Comcast email problem?

The reason I got a touch is to check email when traveling. As of a few weeks ago, I could no longer do this. The comcast.net page now requires Flash and directs me to the install page (which I cannot download to the touch). I asked about this at the Apple Store and the touch doesn't have/cannot have Flash.
Has anyone figured out how to get past the Flash page to just sign in and get email? I am going around with Comcast about this -- they continue to mix up the iPhone and the touch. I will post if I get a solution from them. In the meantime, can anyone help?

If you do NOT have the January Software Update, you must use the Webmail for Comcast. from Safari, type in http://mobilebeta.comcast.net works as advertised.
If you have purchase the January Software update:
Click 'Mail' Application
Click 'Other'
POP Information
'Name' is whatever name you want to call the account
'Address' is you email address
'Description' Whatever you want to call the account
Incoming Mail Server
Host Name = mail.comcast.net
User Name = [Your email address]
Password = [Your password] THIS IS CASE SENSITIVE
Outgoing Mail Server (SMTP)
Host Name: smtp.comcast.net
User Name = [Your email address]
Password = [Your password] THIS IS CASE SENSITIVE
It is really easy: just followed comcast for Outlook link
http://www.comcast.net/help/faq/index.jsp?faq=EmailOutlook17742
Looks a lot nicer than in the web.
If you make any errors or need to change anything, go to home, then settings, then Mail

Has anyone solved the FaceTime problem of seeing, being seen, hearing but " not being heard"

I have used facetime and Skype with my family. We could see and hear each other. Now, however, they can see but not hear me even though I can see and hear them. I have seen others complain about this. Has anyone received a response or answer from Apple?

I have found a few people talking about it, but not seen any responses from Apple as to how or if it's fixed yet. Same thing with my parents brand new iMac... using Facetime, I can see, hear them fine, they can see me fine, but not hear me.....nothing on either end is set incorrectly after checking over and over from other threads.
Waiting for Apple to fix basically........

WVC54GCA - over sensitive motion detection, has anyone solved it yet?

My cams spam my mail account whenever I have motion detection enabled, the images it sends aren't anything to do with motion. This seems to be a common issue with these.
Has anyone got it working correctly?

Try upgrading/reflashing the firmware of your Camera. Follow this link .
After a firmware upgrade, you must reset the Camera to factory defaults, then setup the Camera again from scratch.
To reset the Camera press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Now re-configure your Camera...

Has anyone solved this problem?

My ipod was taking forever on the 'do not disconnect' setting and getting really hot. I left for work and it was still the same when i came in 4 hours later.
In the end i decided to simply remove the dock from the ipod. When the screen changed it had the notorious folder and ! icon displayed. Now when i attempt to connect to my PC it does the same-takes forever and doesn't actually shows up in itunes (although the usb port recognises it as large storage device).
All this is accompanied by a constant spinning of the hard drive in the ipod. I know this is a common problem and was wondering if anyone with this problem has solved it without sending it for repair.

One method is to change to a more reliable firewire connection. Try here:
http://www.kelleytown.com/ikelleytown.htm#top

Has anyone solved itunes skipping?

Similar Messages

Maybe you are looking for