Has anyone used webgate for apache 2.0 with apache 2.2 on linux ?

eom

Hi,
I am doing a evaluation and I have installed Apache 2.0.32 (latest beta) on Windows
2000 and am using WebLogic Server 6.1SP1. However when I tested the configuration,
I get this error saying:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.so into server:
The specified procedure could not be found.
This is how I configured the httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
TIA for any pointers to get it to work.
Cheers
Arthur
"Eric Mountain" <[email protected]> wrote:
Apache 2.0 is not yet officially supported on Windows as Apache2 has
not
been production-released. So BEA cannot certify Apache2 with WLS of
course.
You need Apache 2.0.16 (alpha) to work with the modules delivered with
WLS
6.1 SP1 and SP2.
I got it working more or less, but it seems to be a bit flakey... i.e.
my
1st request works OK, but none after that.
I have been told that SP3 will support Apache2 on Windows "for real"
- of
course, this is assuming Apache release Apache2 on schedule I suppose.
:E
Robert Patrick wrote in message <[email protected]>...
It looks like the "Platform Support" snippet has not been updated butif
you
look below, you will see that the plug-in for Apache 2.0 only is supportedon
Windows...
Michael Halmich wrote:
It seems that the setup is supported based on this url:
http://edocs.bea.com/wls/docs61/adminguide/apache.html
... no: "The Apache HTTP Server Plug-In is supported on Linux, Solaris
and
HPUX11 platforms."
http://edocs.bea.com/wls/docs61/adminguide/apache.html#112697

Similar Messages

  • Has anyone used Motion for 'still graphics' (300dpi)?

    I used Motion a lot several years ago on a film. Great app. I'm producing a series of Ebooks right now, with many graphics. I'm using Pages, Photoshop, EasyDraw, for the graphics ... but remember how marvelous Motion was.
    I'm wondering if it is possible to use Motion just for doing still graphics? And how one might set the resolution to reflect this (something like 300 dpi), ... or can one set any size (a very large 72dpi (given it's designed for motion and video) that can then be translated to 300 dpi after the fact.
    If anyone has ever used Motion for simple non-motion graphics, I'm all ears,
    Ben

    First of all, create a new document in Photoshop: enter your output format (US Letter, A4, whatever) with 300 dpi settings. Then change your units from to pixels and that is the size that your motion project should have.
    Remember though, that Motion outputs only in RGB that has a much wider gamut than CMYK, which is the colorspace of print. So you might still have to color proof your image in Photoshop.
    Also, depending on your graphics card, Motion has a limit of image sizes it can work on: 2K, 4K or 8K in the current models. For large print formats that could be not enough.
    I would never use Motion for print jobs. However I can imagine that I could export (with transparency) some effects like stills from animated particles, 3D replicators and import them into my photoshop composition. So Motion could be used more like an extra tool.
    Michal

  • Has anyone used MDC for R/3 Systems?

    Hello,
    We have a custom transaction that we run against our R/3 (ECC 6.0) system that's performing poorly.  Adding an index helped but it's not enough to make the transaction run within the 10 minute timeout period configured for dialog processes.  I am testing defining the table as an MDC table.  I know SAP supports this for BI systems but has anyone tried it for R/3?
    Thanks,
    Florencio

    Hello Florencio,
    here I have to correct Maltes statement.
    INCLUDE columns in an index, MDC tables and some other DB2 features are "supported" in the ABAP DDIC. Supported here means that if a database object which uses one this these DB2 specific features needs to be changed (for instance during an upgrade) the ABAP dictionary will ensure that these features survive the modification.
    We know that there are scenarios where it makes sense to use these DB2 specific features. So, if you know what you are doing, you are free to use MDC organized tables, INCLUDE-columns in indexes etc. in your R/3 OLTP system.
    To find out what exactly is supported by the ABAP DDIC, please refer to chapter 7.3 ('Tables and Indexes') in the [DB2 Database Administration Guide|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03d5fb8-b619-2b10-c383-c6d56872829e]. Not all features are supported in all R/3 versions.
    Also note that the support for specific DB2 features is continiously extended. For the forthcoming version of DB2 e.g. we plan to support table partitioning in the ABAP data dictionary.
    Regards,
                                              Johannes

  • Has anyone used the new 5K retina iMac with Lightroom

    Has anyone  used Lightroom with the new 5K Imac. If so any problems ?

    Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
    Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

  • Has anyone used BootStrap Tour or PageGuide.js with their SAPUI5?

    Hello,
    Has anyone used any of these guide frameworks or something similar on their web applications across multiple views?
    Regards,

    This is a menu that has been created using Fireworks as can be verified by the following statement
    <!--Fireworks CS3 Dreamweaver CS3 target.  Created Wed Mar 24 11:44:39 GMT-0400 (Eastern Daylight Time) 2010-->
    The creation date tells me that the menu was created just on a week ago.
    So you are now having a problem with the newly created non-Spry menu! What better place to drop in then our trusty Spry Forum that deals with Spry related issues.
    We will help you though.
    http://www.greatermichiganpmc.org/ looks for a style sheet that it cannot find unlike http://www.greatermichiganpmc.org/pmc.htm where it has been found. Change the URL (in red) to reflect where the style sheet resides.
    <script language="JavaScript1.2" type="text/javascript" src="mm_css_menu.js"></script>
    <style type="text/css" media="screen">
         @import url("./pmc.css");
    </style>
    I hope the above helps our mates using Fireworks.
    Ben

  • Has anyone used MASS_RSEOUT00 for EDI processing?

    Hello,
    My Client is experiencing an increasing volume of EDI processing. I'm thinking about switching from running RSEOUT00 to running MASS_RSEOUT00.
    Has anyone been using MASS_RSEOUT00? Can you please share your experience? Thoughts?
    Greatly appreciate...

    In short yes this will replace the step of entering/recording the vendor invoice into the A/P area, this BAPI is designed accomodate the loading of A/P invoices, more information is available in the Interfaces to Accounting documentation in the R/3 Library (under Cross Application Functions -> Interfaces to External Systems).
    The bapi is envoked in the same manor as others...
    CALL FUNCTION 'BAPI_ACC_INVOICE_RECEIPT_POST'
      EXPORTING
        DOCUMENTHEADER       =
    "   CUSTOMERCPD          =
    " IMPORTING
    "   OBJ_TYPE             =
    "   OBJ_KEY              =
    "   OBJ_SYS              =
      TABLES
        ACCOUNTPAYABLE       =
        ACCOUNTGL            =
        ACCOUNTTAX           =
        CURRENCYAMOUNT       =
    "   PURCHASEORDER        =
    "   PURCHASEAMOUNT       =
        RETURN               =
    "   CRITERIA             =
    "   VALUEFIELD           =
    "   EXTENSION1           =

  • Has anyone used the Panasonic BT-LH2600WP monitor with Premiere CC and AJA T-TAP?

    I'm considering investing in the Panasonic 26" BT-LH2600WP to use as a color correct monitor with my 27" imac and a aja T-tap (thunderbolt to sdi adapter).  Has anyone done this or know if there are any quality issues?
    thanks
    Phil

    Phil, I have a similar set up, but I have the 17-inch Panasonic SDI monitor. Premier works okay with the T-Tap, with some minor yet annoying bugs.
    If I monitor audio via HDMI from the T-Tap, which I prefer, then my Panasonic monitor and its matching audio are about half a second out of sync with the iMac display. (But the HDMI audio is perfectly synced with the Panasonic SDI video.) This is annoying because both the Panasonic and the iMac are directly in front of me, and it's confusing seeing the out of sync iMac image. Definitely not something to show any clients.
    If I switch my audio monitoring to "Adobe Desktop Audio," which is the feed from the iMac's headphone jack, this problem disappears. In that case, the Panasonic and the iMac display are almost perfectly matched up. However, now I'm getting lower quality audio, with added digital-to-analog processing in the signal.
    Using the T-Tap is smooth and trouble free in Final Cut Pro X, but in Premier it is a bit buggy. That said, it works mostly okay.
    While we're on the subject, can anyone suggest the best Preferences settings in Premier to use the AJA T-Tap? I may be missing something.
    Thanks!

  • Has anyone used Ethernet Gateway and LabVIEW, communicating with Ethernet/IP protocol ?

    I have a PLC system (Jokab Safety B20)  together with Ethernet Gateway (also Jokab Safety type E1).
    What I want to do is to communicate with this unit using LabVIEW Ethernet/IP.
    Read a couple of data and write a couple.
    Has anyone anything like this with LabVIEW and Ethernet/IP ?
    I'm completely new to using PLC's, but I have made a minimum PLC application, but can't get communication to work with LabVIEW (+ Ethernet/IP).

    i generally use an OPC server to talk to he PLC and then use Datasocket to talk to the OPC server tags.
    if that gaetway thing is an OPC server then you maybe abel to do data socket R/W via it.
    Otherwise the NI OPC server may support that widget and (at the rate I bill out) is a good deal in the eyes of most of my customers.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Has anyone used the T410S swictchable graphics card with games?

    Anyone?
    There had been some reports of over heating with this unit
    I was looking to purchase one
    Thx

    order my new MP with the 8800 card day after announced (over 4 weeks ago), still waiting.
    Some say they have a shipping sate of next week. Other have rumours of the container ship with all the cards being stuck in port in Shanghai because of bad weather.

  • Has anyone used infin to assist in troubleshooting ?

    I had a security problem when my firewall was temporarily turned off.  A tech company named "infin" assisted me with the problem and with a printer problem.  Since assisting me, the tech said that the company will no longer be in business.  Has anyone used "infin" for assistance because the tech said his company does a lot of work on Apple products. I am trying to find out more on the company.

    How did you find that company?
    Did you allow them remote access to your computer?
    Did you give them credit card details?
    If you google their name, you'll find several entries. I've never heard of them. And no, I've never used them - nor would I ever. Why deal with an unknown company when I can call Apple tech support or visit a Genius Bar in the Apple store free of charge?

  • Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband.  How do I set it up?

    Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
    Thanks, Doctor Mark

    Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
    It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
    Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
    In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
    But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

  • Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

    Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition.   I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail.   Any input is appreciated. 

    Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW?  Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver.  You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go.  Hope this helps.
    Jason N 

  • Has Anyone Used the WD My Book External Drives for Time Machine?

    I'm thinking of getting the Western Digitial 1 or 2 TB My Book (Pro Edition 2 or Studio Edition) External Drives for use with 2 MacPros. Has anyone used these and could I use them with Time Machine? Would I have to reformat them for Time Machine?
    Thanks!
    Ashley

    You may, and probably want to format them, even if not TM use, I would anyway. Not everyone is happy with MyBook Pro and TM.
    I buy bare FW devices and add disk drive of choice, or just use OWC
    http://www.macsales.com/firewire and works well.
    FW800 is also better on the new Mac Pro
    http://www.barefeats.com

  • Has anyone used the invoxia NVX 620 for conference calling with iPhone

    I am looking for a speaker systems with a very good mic.    Tired the JBL Flip, not so good. Has anyone used or purchased the invoxia NVX 620 or the Audiooffice?    Looking for recommendatons. 
    Thank you!

    I just did a Google search and found several reviews on the first page.

  • I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac.  I have purchased the dazzle and the specs seem to be for windows only.  Has anyone used this product on mac?

    I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac.  I have purchased the dazzle and the specs seem to be for windows only.  Has anyone used this product on mac?

    I am not certain, but I believe there is a version of Dazzle for the Mac. However, it is not the route I would chose.
    You really need a proper analogue to digital converter, like the ADVC110, to connect to your camera via the usual RCA cables, and to your Mac via firewire.

Maybe you are looking for