Has/can anyone swap black for white in store?

Has anyone swapped their iPhone 5 for a different colour in store?
The reason I ask is that with only moderate use the black is showing signs of wear around the bezel, something that should not be happening to such a new and expensive device.
What is Apple's policy on this, does anyone know?

hi steenmikkelsen2,
white means that your mask is transparent until you fill it with black. since then, there was no option to change the mask default settings from white to black otherwise you have to do what Noel suggested. but i hope my suggestion will help you better.
►press "Alt" key on your keyboard simultaneously as you click on the "Add Layer Mask" button under the Layers panel. that switches a white layer mask to black. :-)

Similar Messages

Planning to buy a new iPhone4 . Can't decide black or white.

Planning to buy a new iPhone4 . Can't decide black or white.
Any help here.
Is it just the color which apple changed ?
Is there a difference in the display clarity with the color?

I believe the phones are exactly the same, The Black & White is cosmetic,
Personally I would go for white, because everyone I know who has an iPhone has the black one
The choice is down to you at the end of the day!!!
Either way, it's a great phone, Enjoy!

My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by hoster, so they should work. Can anyone help me, for these forms are crucial for my business.

My mail forms created by muse 2014.0.1.30 do not work. PHP 5.4 is enabled by my hoster, so they should work. Can anyone help me, for these forms are crucial for my business. The forms confirm delivery, but the mails are not recieved. No spam filters enabled.
Meanwhile, I was able to narrow the problem down: PHP seems not to accept a re-directed mail address as sender of the mail in some cases. So, it has nothing to do with the mail form itself.

Hi Ingo,
Please refer to this document, Troubleshooting Muse Form Widgets Used on Third-Party Servers
Last section, "I've uploaded my new Muse form, and tried submitting it in the browser, but I never receive an email with the form data. What's wrong?"
- Abhishek Maurya

Swap black and White in layer mask

How do I change the default settings for the layer mask, as I'd like to swap black and white color.

hi steenmikkelsen2,
white means that your mask is transparent until you fill it with black. since then, there was no option to change the mask default settings from white to black otherwise you have to do what Noel suggested. but i hope my suggestion will help you better.
►press "Alt" key on your keyboard simultaneously as you click on the "Add Layer Mask" button under the Layers panel. that switches a white layer mask to black. :-)

Is it possible to create a schedule in Labview . Example: i want to off the lights at 7pm and want it on at 8am. If there is can anyone teach, its for a school project. Im using labview 2011

Is it possible to create a schedule in Labview . Example: i want to off the lights at 7pm and want it on at 8am. If there is can anyone teach, its for a school project. Im using labview 2011...thx

Since this is a school project I recommend you do the work yourself. You will not learn asking others to do it for you. In addition, folks here will not do your homework for you. We are however more than wiling to answer specific questions for you. Post what you have done or tried and ask specific questions. I am confident you will get assistance.
And to answer your question, yes LabVIEW can be used to implement a scheduling program.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

When i update my IOS7 i lost my all pic from my IPAD2 how to get back those pic? and i don,t think so i did kept back up before i did that. can anyone help me for this issue?

When i update my IOS7 i lost my all pic from my IPAD2 can anyone suggest how to get back those pic? and i don,t think so i did kept back up before i update ios7. can anyone help me for this issue?

The photo's in your camera roll would be in a backup, if you have one (iCloud or iTunes). If you did not keep a backup somewhere, they are gone. Sorry, but that is the way of any data - if you don't have a backup of it somewhere, there is nothing to restore it from.
All other photo's should be on your computer somewhere anyway - whereever you had them to sync to the device originally.

Can anyone recommend software for opening PPS with Lion

can anyone recommend software for opening PPS with Lion I have seen pear notes but woud like some feedback before getting it

No. Everything I have seen is that PearPC is a project underdevelopment.
What do you need to run that is PPS?
Allan

Can anyone send tutor for performance tuning?

can anyone send tutor for performance tuning?I like to chk my coding.

1.      Unused/Dead code
Avoid leaving unused code in the program. Either comment out or delete the unused situation. Use program --> check --> extended program to check for the variables, which are not used statically.
2.      Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called. For example:
This is better:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
Than this:
PERFORM sub1.
FORM sub1.
IF f1 NE 0.
ENDIF.
ENDFORM.
3.      Usage of IF statements
When coding IF tests, nest the testing conditions so that the outer conditions are those which are most likely to fail. For logical expressions with AND , place the mostly likely false first and for the OR, place the mostly likely true first.
Example - nested IF's:
IF (least likely to be true).
    IF (less likely to be true).
     IF (most likely to be true).
     ENDIF.
    ENDIF.
   ENDIF.
Example - IF...ELSEIF...ENDIF :
IF (most likely to be true).
ELSEIF (less likely to be true).
ELSEIF (least likely to be true).
ENDIF.
Example - AND:
   IF (least likely to be true) AND
      (most likely to be true).
   ENDIF.
Example - OR:
        IF (most likely to be true) OR
      (least likely to be true).
4.      CASE vs. nested Ifs
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
5.      MOVE statements
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
MOVE BSEG TO *BSEG.
is better than
MOVE-CORRESPONDING BSEG TO *BSEG.
6.      SELECT and SELECT SINGLE
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. If the entire key can be qualified, code a SELECT SINGLE not just a SELECT.   If you are only interested in the first row or there is only one row to be returned, using SELECT SINGLE can increase performance by up to three times.
7.      Small internal tables vs. complete internal tables
In general it is better to minimize the number of fields declared in an internal table. While it may be convenient to declare an internal table using the LIKE command, in most cases, programs will not use all fields in the SAP standard table.
For example:
Instead of this:
data: t_mara like mara occurs 0 with header line.
Use this:
data: begin of t_mara occurs 0,
        matnr like mara-matnr,
        end of t_mara.
8.      Row-level processing and SELECT SINGLE
Similar to the processing of a SELECT-ENDSELECT loop, when calling multiple SELECT-SINGLE commands on a non-buffered table (check Data Dictionary -> Technical Info), you should do the following to improve performance:
o       Use the SELECT into <itab> to buffer the necessary rows in an internal table, then
o       sort the rows by the key fields, then
o       use a READ TABLE WITH KEY ... BINARY SEARCH in place of the SELECT SINGLE command. Note that this only make sense when the table you are buffering is not too large (this decision must be made on a case by case basis).
9.      READing single records of internal tables
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. This means that if the data is not sorted according to the key, the system must sequentially read the table.   Therefore, you should:
o       SORT the table
o       use READ TABLE WITH KEY BINARY SEARCH for better performance.
10. SORTing internal tables
When SORTing internal tables, specify the fields to SORTed.
SORT ITAB BY FLD1 FLD2.
is more efficient than
SORT ITAB.
11. Number of entries in an internal table
To find out how many entries are in an internal table use DESCRIBE.
DESCRIBE TABLE ITAB LINES CNTLNS.
is more efficient than
LOOP AT ITAB.
CNTLNS = CNTLNS + 1.
ENDLOOP.
12. Performance diagnosis
To diagnose performance problems, it is recommended to use the SAP transaction SE30, ABAP/4 Runtime Analysis. The utility allows statistical analysis of transactions and programs.
13. Nested SELECTs versus table views
Since releASE 4.0, OPEN SQL allows both inner and outer table joins. A nested SELECT loop may be used to accomplish the same concept. However, the performance of nested SELECT loops is very poor in comparison to a join. Hence, to improve performance by a factor of 25x and reduce network load, you should either create a view in the data dictionary then use this view to select data, or code the select using a join.
14. If nested SELECTs must be used
As mentioned previously, performance can be dramatically improved by using views instead of nested SELECTs, however, if this is not possible, then the following example of using an internal table in a nested SELECT can also improve performance by a factor of 5x:
Use this:
form select_good.
data: t_vbak like vbak occurs 0 with header line.
data: t_vbap like vbap occurs 0 with header line.
select * from vbak into table t_vbak up to 200 rows.
select * from vbap
          for all entries in t_vbak
          where vbeln = t_vbak-vbeln.
endselect.
endform.
Instead of this:
form select_bad.
select * from vbak up to 200 rows.
select * from vbap where vbeln = vbak-vbeln.
endselect.
endselect.
endform.
Although using "SELECT...FOR ALL ENTRIES IN..." is generally very fast, you should be aware of the three pitfalls of using it:
Firstly, SAP automatically removes any duplicates from the rest of the retrieved records. Therefore, if you wish to ensure that no qualifying records are discarded, the field list of the inner SELECT must be designed to ensure the retrieved records will contain no duplicates (normally, this would mean including in the list of retrieved fields all of those fields that comprise that table's primary key).
Secondly, if you were able to code "SELECT ... FROM <database table> FOR ALL ENTRIES IN TABLE <itab>" and the internal table <itab> is empty, then all rows from <database table> will be retrieved.
Thirdly, if the internal table supplying the selection criteria (i.e. internal table <itab> in the example "...FOR ALL ENTRIES IN TABLE <itab> ") contains a large number of entries, performance degradation may occur.
15. SELECT * versus SELECTing individual fields
In general, use a SELECT statement specifying a list of fields instead of a SELECT * to reduce network traffic and improve performance. For tables with only a few fields the improvements may be minor, but many SAP tables contain more than 50 fields when the program needs only a few. In the latter case, the performace gains can be substantial. For example:
Use:
select vbeln auart vbtyp from table vbak
into (vbak-vbeln, vbak-auart, vbak-vbtyp)
where ...
Instead of using:
select * from vbak where ...
16. Avoid unnecessary statements
There are a few cases where one command is better than two. For example:
Use:
append <tab_wa> to <tab>.
Instead of:
<tab> = <tab_wa>.
append <tab> (modify <tab>).
And also, use:
if not <tab>[] is initial.
Instead of:
describe table <tab> lines <line_counter>.
if <line_counter> > 0.
17. Copying or appending internal tables
Use this:
<tab2>[] = <tab1>[]. (if <tab2> is empty)
Instead of this:
loop at <tab1>.
append <tab1> to <tab2>.
endloop.
However, if <tab2> is not empty and should not be overwritten, then use:
append lines of <tab1> [from index1] [to index2] to <tab2>.
P.S : Please reward if you find this useful..

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

How I can make an account for the app store Spain without credit card?

How I can make an account for the app store Spain without credit card?

Follow these instructions and open an iTunes account. Then use that same account to get free apps from the Mac App Store.
Create an iTunes App Store account without a credit card
http://support.apple.com/kb/ht2534

Can I create black and white movies using the iMovie app for the iPad?

I would like to make a black and white movie using the iPad iMovie app. Is it possible to film in black and white instead of color?

station_two wrote:
You can open and edit TIFFs, PSDs and JPEGs in Adobe Camera Raw, not just true raw files from a digital camera.
This may sound strange, but I actually got to the stage of regretting ACR several versions back, because you ended up with nothing to do in Photoshop. When you think how far ACR has come since then, you can see how Lightroom (with the same RAW conversion engine and features) is all most photographers need. Adding ACR as a filter inside Photoshop was a master stroke. I wonder who thought of it? Russell Brown would be a good bet, but Chris Cox has made it clear on more than one occassion, that us lay folk dramatically underestimate what goes into coding, intergrating, and proving new features.
BTW That was not a straight line for some joker lauch into tails of woe about all the bugs that make it into final release versions.

TS1702 Can anyone help? For no reason, I cannot open any of my apps. I can open everything else, just not apps. I have turned the ipad on and off several times, this doesn't work. Does anyone know what to do and why this has happened?

Hello, for some strange reason I cannot open any of the apps I have. I have tried turning the ipad on and off and this doesn't work. I can open everything else (videos, camera, etc) just no apps. Can anyone help please?

If it's the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's all apps including Apple's then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I can not print black and white only documents and I have a full black ink cartridge

I have been an loyal HP customer since the orginal laserjet in the early 90s and then many inkjets from HP after that.
I bought an HP 6600 All in one for the house and have only ever printed in black and white.
For some reason one of the color ink carts is empty after a few months of black and white only printing.   No problem - I only print in black and white - or so I thought.
Nothing I have been able to do (aside from buying a color cart I don't need) is able to tell the printer to not worry about color and only use the black and white cart. Past inkjets from HP didn't have a problem with this.
Please tell me HP didn't do this on purpose and is going to trying and justify the need for me to buy any color carts if I never print in color. HP - if you did and you are going to try and tell me you neeeded to do this for any reason then someone please sign me up for the class action lawsuit if you are an attorney looking for plaintiffs.
However, I am sure I am overlooking some simple setting on the 6600 to move past this annoyance.
Thanks!

Hi Atlanta90210,
We appreciate your brand loyalty, and I'm very sorry for the frustration this has caused.
There is a lot of good information in Cannot Print When One of the HP Ink Cartridges is Empty. It explains how your printer works and how it is designed. Another good resource is posted here.
In the first link I mentioned, there are steps to print with black ink only. I have a similar printer to this at home (with the same print mech), and I have found that the steps to print with black ink only have saved me lots of ink.
There needs to be ink in all the cartridges for this printer to continue printing (after the cartridge's reserve mode is depleted). Once you have replaced the empty cartridges, you can change the print settings to print with only black ink so the printer doesn't use color ink. Until then, there is not a way to bypass this.
I know this is not the answer you were hoping to receive, but I do hope it was helpful.
I'd be happy to help you with any other questions or concerns.
-- ReverseTalk
I work on behalf of HP.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

How can I get my printer to print in color? I can only print black and white

HP Officejet 6500 E710n-z-------windowsxp My printer will not print anything in color. How can Iget my printer to print in color? I can only print in black and white. It is a new Printer and we just installed it 2 wks ago.

I am not sure I understand ''it still will not print. ''
If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

How can I print black and white

I would like the option of printing in black and white from my iPad. Does anyone know if this is possible? Just hooked up Epson XP -600 AirPlay wi fi printer.
Does this require an app? Prints fine in color.

If you print a B&W image, some printers will still use color ink in the process.
There is no way to tweak print settings on the iPad or iPhone. Apple designed it to automatically apply default settings to any print jobs.
I recommend looking at an app like Printopia. This acts as an inexpensive "print server" for your iPad which allows you to configure advanced settings from the computer, such as custom paper sizes and color options.

Has/can anyone swap black for white in store?

Similar Messages

Maybe you are looking for