Have a current account with zero balance...but still have my old phone...could I reactivate the old one?

Here's the deal...I have a current prepaid VZW account, but ran out of balance on it (exactly zero), but don't yet have the $$$ to refill it to make it active again. I have an old phone (same basic phone, except for older version) that is only about a year-and-a-half old. I was going to donate it to a charity or something like that, but I forgot all about it. I did the phone swap from it to my current phone a while back as well. If I reactivate the old phone, would I get the $10 bonus with a new number, and be able to use it as a temporary backup-type of phone ? Would VZW have a problem with that? It would only be a temporary situation, and would give me 60 days to try to refill the current phone. I would like to have an alternate number to use as a job contact number, and have no other number to use. Can I have two different online My Verizon accounts with the same name, address, etc. with two different phones with different numbers?

go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine

Similar Messages

I have an iPhone 3GS that I dropped in water. It still does everything but get service, can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one...

I have an iPhone 3GS that I dropped in water for a moment. After drying it and everything, it still does everything but get service. Can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one... is this true? I would truly appreciate the help, please let me know, thanks!

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

Script logic not working for GL account with Zero balance

Dear Experts,
I have a scenario where the GL account balance in ECC is 0 and when a script logic runs in BPC the same should capture a closing balance as "1".
Though I have written the below logic, this is not getting executed and writing back the value as "1".
Kindly help me on the same.
*WHEN ENTITY
*IS "ABC"
*WHEN ACCOUNT
*IS "20300000"
*REC(EXPRESSION = 11, ACCOUNT = 20300000,FLOW = F99, ENTITY = ABC, PROFITCENTER = 130010 , INTERCO = I_NONE , CONSOSCOPE = G_NONE, CURRENCY = LC ,CATEGORY = ACTUAL, AUDITID = INPUT)
*ENDWHEN
*ENDWHEN
*COMMIT
Regards,
Shilpa

Hello Vadim Kalinin,
Thanks for the very swift help.
Merger of the client happened in 2007. ECC is using the " 20300000- change in fair value " account to record both pre-acquisition and post-acquisition values.
Since the treatment of pre-consolidation and post consolidation reserves is different the split of the amount between pre and post-acquisition values has to be done. For the same post acquisition value is reduced from this account using a script logic as below.
WHEN FLOW
*IS "F99"
*WHEN ENTITY
*IS "ABC"
*REC(EXPRESSION = ([ACCOUNT].[20300000] -3258603),ACCOUNT = 20300000,FLOW = F99, INTERCO = I_NONE , CONSOSCOPE = G_NONE ,CURRENCY = LC ,CATEGORY = ACTUAL )
This logic worked when the account has a figure, but in July 2014 in ECC the account had a transaction and the balance has become Zero. Until this account has a figure this pre acquisition logic is not working.
For making this work, I am trying to write a new logic to make the balance of this account as "1" in BPC through the script logic.
Kindly suggest me on the same.
Regards,
Shilpa

I have an Icloud account with my parents but want to make a new one. Will I lose everything that is currently on my phone? i.e. phone numbers, pictures, music

I have an Icloud account with my parents but want to make a new one. Will I lose everything that is currently on my phone? i.e. phone numbers, pictures, music

In case you're not clear - iPad/iPhone storage, and iCloud storage, are totally separate. Buying more iCloud storage does not give you more storage space on your device. Your device has a fixed storage space for apps and data (e.g., 16GB - which is more like 12GB in real terms). iCloud storage just allows you to store more documents, mail, photos, etc, in the cloud.
Matt

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID

DOCUMENT WITH ZERO BALANCE

Dear Expert
How we can authorized to user he add document with zero balance in Delevery Challan.
Thanks & Best regards
MRK

Hi Muhammad......
Its nice to here that your problem is solved. Great....
But if your problem is solved then you should close your thread by giving forum points to the right answer......
Hope you do that.....
Regards,
Rahul

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks it asks for the old account's password(which my ex changed by now)

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/

Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

No it is not possible. Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

HT1751 I have always shared my apple ID & iTunes library with my daughter but now she is old enough to have her own. Is there a way to split my iTunes library with hers if she now has her own apple ID/library?

I have always shared my apple ID & iTunes library with my daughter but now she is old enough to have her own. Is there a way to split my iTunes library with hers if she now has her own apple ID/library?

settings->store
there you change appleID
multiusing ios devices don't really works very well

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

I use 1 Icloud account with 2 devise but the other devise arrest out mine, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?

I use 1 Icloud account with 2 devise but the other devise arrest out my devise throue find my iphone, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W.

HT204266 I have enough balance, but it says that YOUR PRUCHASE COULD NOT BE COMPLETED, why?

I have enough balance, but it says that YOUR PRUCHASE COULD NOT BE COMPLETED, why?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Have a current account with zero balance...but still have my old phone...could I reactivate the old one?

Similar Messages

Maybe you are looking for