Have a HP OJ 6500 Wireless all-in-one, using a Windows 7 64-bit OS. Wireless stopped working.

HP OJ 6500 Wireless all-in-one, using Win 7 64-bit OS.  Initially configured for both USB cable and wireless when purchased.  Wireless drivers updated per setup instructions.  A year later, the wireless has gone on sabbatical.  I've re-installed the SW, downloaded the Win 7 OS drivers.  Can only print through USB cable.  Wireless still not functional.  Frustrating! 

Hi, I assume that you have lost your wireless print functionality? You can refer to the following link to see if it can resolve your issue: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02253256&tmp_task=solveCategory&lc=en&dlc=en&cc...
Although I am an HP employee, I am speaking for myself and not for HP.
***Say thanks by clicking the "Kudos! Star" which is on the left***
**Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

Similar Messages

  • HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

    Hi,
    I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
    Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
    Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard.   After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically.  That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
    However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
    Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates.   After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it!   No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all.  It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
    I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it.  My Canon IP4200 Pixma has just died on my personal PC upstairs.
    However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD?  Was the Suite of software ever updated for Windows 7?
    Thank you,
    Lee James
    West Sussex UK
    This question was solved.
    View Solution.

    Hi BAW9DV,
    I hate to hear you are having issues.  While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit.  Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired. 
    Faxing:
    1. Use Windows Fax and Scan
       A. Type Windows Fax and Scan into search box
       B. Configure fax machine for use.  Click Here to view Microsoft documentation for use.  Note: This is a 3rd party website. HP and I are not responsible for content of this site.
       C. Select New Fax
    Maintenance tasks from front panel:
    Running the Clean Print Cartridges Utility Click Here
    Printing setf-test page Click Here
    Evaluate test page Click Here
    Align the Cartridges: Press setup-Press 5, then press 2
    If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit.  However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers.  Global contact information can be accessed Here. 
    P.S.  If you upgrade through technical support, be sure to ask about carepacks.  Extended warranties may also be available at a discounted rate for upgrading. 
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • I've installed Firefox 3.6 running under Vista V6.0 Service Pack 2. Any attempt to do anything at all with it produces a Windows error message that Firefox has stopped working and it then closes Firefox. Is this a Vista issue?

    The download and install processes seemed to work OK
    The first Firefox window opened suggesting I update Adobe Flash Player. Clicking on download (with AV s/w either on or off made no diference) produced the Windows message that Firefox had stopped working.
    By-passing the Adobe download suggestion and attempting to open up my home page (Google) produced the same result.
    In fact any attempt to do anything, i.e. hitting the Enter key or left-clicking the mouse, produced the same result. Firefox freezes and WIndows then closes it.

    Try to update Windows Vista Service Pack 2 using Windows Update, then select all high-priority or important updates, install them and restart the computer. Run Firefox. If it works fine then OK or if it crashes then there was no problem with the operating system.
    The second method is restart your PC, after the manufacturer logo appears and before "Microsoft Corporation(C)" progress bar appears press F8 key. you will be presented with a menu with options-
    Safe Mode
    Safe Mode with Networking
    Safe Mode with Command Prompt
    etc. select "Safe Mode with Networking , and then login to your user account. Run Firefox again. If it works normally, then that probably means that your PC was infected prior to installing Firefox. Update your existing antivirus and run a full scan or acquire free Antivirus like Avast Free Antivirus etc.
    If it still crashes, then try re-installing NOT Repairing Firefox AFTER INSTALLING AN UPDATED ANTIVIRUS .
    OK the last way, better uninstall Firefox 3.6 and install Firefox 4 Beta 7. Firefox 4 Beta 7 runs 3 times faster than Firefox 3.6, with an overall improved interface.

  • Hp 3052 all-in-one software for windows 8 32-bit and 64-bit

    I have a 3052A and windows 8 32 bit.

    OK... and your question is????
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • All in one HP Laser Jet Pro 200 Color MFP (M276n) stopped working

    I have an HP Laser Jet Pro 200 Color MFP (M276n) that I had installed and woking fine. 
    I changed my desk and removed the USB from the computer and when I plugged it in again i could not print or use any of the functions through the computer. I'm running 64bit Win 7. 
    I've tried unistalling the printer and downloading the laster driver package from HP.com.
    But when I try installing it and come to where the installationprogram want me to connect the USB-cabel the printer doesn't show up (I can't click "Next" to begin installtion).
    So right know I cant print and I can't reinstall the printer. 
    How do I fix this??

    Make sure the usb cable is plugged in properly, the right port at the back of the printer. If still doean't work, maybe get a new usb cable?

  • Time Capsule used as router attached to Comcast Modem. wireless stops working. All I have to do is unplug the TC and plug it back in and TC cycles up and have green light as well as the Comcast modem operates correctly. TC 4 yrs old. How do I correct?

    Time Capsule used as router attached to Comcast Modem. Wireless stops working with no light showing and Link indicator on modem off.
    All I have to do is unplug the TC and plug it back in.
    TC cycles up and green light appears as well as the Comcast modem operates correctly.
    TC 4 yrs old. How do I correct?

    I have the latest and greatest Time Capsule and Comcast. Here is the weird thing. If I have one network set up, then occasionally that network will wedge. If I set up a 5GHz and a 2.4GHz network, then one of them (usually the 5GHz) will wedge. I saw this with a previous Time Capsule, Apple said call Comcast. They checked it out and said it was Apple's problem. Apple said maybe you Time Capsule is bad, so I bought a new one. The problem persists.
    Tonight it's not complely wedged, but super slow. The 5GHz network is getting 0.45Mb/s while the 2.4GHz network is getting 17Mb/s. Both are coming in from the same Comcast cable modem. Apparently the Time Capsule treats them as separate.
    Is it the cable modem or the Time Capsule. I am betting on the Time Capsule, since rebooting it fixes the problem. Resetting the cable modem does not.
    Apple is NO HELP at all. They say reset the Time Capsule. Did that fix it? Yes. Problem solved! No, problem not solved. It will happen again in a few hours.
    Here's the traceroute. Note what happens a few hops away. At hop number 7 the ping times go up by a factor of 200.
    Huginn:~ darrell$ traceroute 128.114.48.10
    traceroute to 128.114.48.10 (128.114.48.10), 64 hops max, 52 byte packets
    1  10.0.1.1 (10.0.1.1)  0.952 ms  0.886 ms  3.428 ms
    2  67.170.200.1 (67.170.200.1)  43.269 ms  27.611 ms  21.004 ms
    3  te-7-1-ur01.scotts.ca.sfba.comcast.net (68.85.101.53)  11.252 ms  8.450 ms  9.778 ms
    4  te-1-5-0-7-ar01.sfsutro.ca.sfba.comcast.net (68.87.226.14)  15.026 ms  27.372 ms  15.516 ms
    5  he-3-9-0-0-cr01.sanjose.ca.ibone.comcast.net (68.86.91.45)  14.374 ms  17.450 ms  24.752 ms
    6  pos-0-0-0-0-pe01.529bryant.ca.ibone.comcast.net (68.86.86.122)  14.627 ms  15.408 ms  14.460 ms
    7  xe-1-2-0.0.paix0.tr-cps.internet2.edu (137.164.130.233)  1583.490 ms  2697.533 ms  3240.337 ms
    8  xe-1-1-0.482--2152.paix0.tr-cps.internet2.edu (137.164.131.62)  2413.800 ms  2937.085 ms  2667.384 ms
    9  dc-svl-core1--svl-px1-10ge-3.cenic.net (137.164.46.14)  4362.188 ms  2399.774 ms  1397.535 ms
    10  dc-svl-agg1--svl-core1-10ge.cenic.net (137.164.47.120)  588.755 ms  2447.772 ms  1795.253 ms
    11  137.164.3.49 (137.164.3.49)  3179.385 ms  1718.755 ms  240.350 ms

  • HP Officejet 6500 E709n all-in-one: how to print CD/DVD labels, on Mountain Lion OS?

    My printer is an HP Officejet 6500 E709n all-in-one: how do I print CD/DVD labels, using MACBook Pro & Mountain Lion OS?
    Thanks,
    Jim
    [Edited for Personal Information]

    Hi there Jim, aka @jknud , welcome to the forums
    I understand you're looking to print CD/DVD labels to your Officejet 6500 Wireless, from your Mac.
    There are normally third party software programs you can download to print out whichever brand of labels you are trying to print on. If you wish to let me know which type of labels you are using, I will see if I can find their support forums for you.
    Have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 6500 E709n All In One.

     HP Officejet 6500 E709n All In One.   I am getting receipts for blocked calls using up an unnecessary sheet of paper.
    These printouts also have a message noting: " Image on Fax Send Report is set to Off and an image of page 1 will appear here for faxes sent as Scan and Fax".
    I would like to receiive receipts for fax sent but don't need a receipt for blocked faxes. 
    Also, on my cover sheet on faxes, I list how many pages are being sent  but when looking up help info., to figure out where to put the number of pages being faxed into the printer,  all I can find is info refering to the Menu Button" on printer.  I CAN'T FIND A BUTTON LABELED MENU ANYWHERE ON THE PRINTER/FAX MACHINE.  I have printed out the entire booklet on this printer and the first page of instructions is a picture of the printer/fax with labels typed and a line drawn to the button it is referring to.  No where does it say menu button ir point to one,
    Please help me with the above and then help me to help myself thru written instructions by telling where or what is the Menu Button. 
    Thaank you very much,

    When trying to fax, I get "no answer"
    and,, also  this response: "Image on Fax Send Report is set mto Off" > What does this mean?       Nowhere on the machine is there a button marked as Fax Send Report.  What do I do?            I have been unsuccessfully trying to fax a document  to Mexico for day6s., I dialed  "523767661779", then " 011523767661779".  and get only a  BUSY SIGNAL.     The main number there  is "52" [for the country., i.e., Mexico], with the possible prefix  international number "011" preceeding it...............followed by the area code & destination  number "3767661779".  No luck.  What to do?

  • Hi i have problems with my iMac g4 all in one

    hi i have problems with my imac g4 all in one ive installed a airport card and its running fine but when i try to connect to my wirless router it connects but i still have no internet,it tells me it cannot find server,im with utility warehouse
    has the airport card got its own secruity???????if so how can i disable it????or do i need a dongle??
    or would it be best to get hold of utility warehouse
    i have another mac running on it and my iphone and an android pad so the g4 is the only one thats not
    please help some one as i would like to sell it to a friend who in need of a computer but needs it to be wireless
    ty

    Reset security questions
    http://support.apple.com/kb/HT5312
    If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    i have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    http://support.apple.com/kb/HT3819 homesharing
    http://support.apple.com/kb/TS2972 troubleshooting home sharing.
    i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =)

  • I have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    i have switched from PC to Mac how do i use my windows version  of adobe photoshop CS3 on my MAC?

    rebel1568,
    All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC.  You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
    CS3 is totally out of the upgrade or cross-grade loop.  You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
    Curt Y is correct in that CS2 will not run on current Mac-Intel machines.  You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
    Of course, you could run your Windows  on your Mac if you installed and ran BootCamp or Parallells.

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • How can I print from my ipad2 to my hp6210 all in one using printopia...I can see the list on my ipad2, I select the printer and say print but nothing happens.

    How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.

    A few things to consider.
    The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared.  If the iMac is having problems printing to the printer it could indicate a problem with the share setup.

  • HP Officejet Pro L7580 All-In-One printer with Windows 8

    I have the HP Officejet Pro L7580 All-In-One printer and want to use it with my new laptop that has Windows 8, but it won't accept the Starter CD (Windows 2000, XP, Vista).  Where can I get a free download to use with Windows 8?  I can print, but currently can scan.

    Hello,
    You can download the software for your product from the link provided below, after selecting the appropriate Windows 8 operating system of your computer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?product=2512008&lc=en&cc=us&dlc=en&lang=en&cc=us
    The link also has support videos that provide instructions on downloading and instaling the software.
    Although I am an HP employee, when I offer advice on HP Products, I'm speaking for myself and not for HP

Maybe you are looking for