Have CS5 and CS6. Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

Just save the document to a new jpeg file name using a lower quality setting or re-size the image down in size the save a high quality smaller new jpeg image.

Similar Messages

Camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700.

camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700. Besides DNG Converter, what can I do to use files directly?

Your next option is to upgrade photoshop. If you can't afford the full version (less than $20/month) you could get elements, it uses the latest version of camera raw, but I think it is a stripped down version though.

How do I upgrade to snow leopard and then restore my files from my time machine HDD backup...without losing any data or reinstalling leopard (10.5)?

How do I upgrade to snow leopard (from leopard 10.5) and then restore my files from my time machine HDD backup...without losing any data or reinstalling leopard (10.5)?

Hello, it's great you have a backup, but 10.6 should just Install 10.6 system files over the top of 10.5 system files, & leave all your data intact on the drive.

Adobe Bridge CS5 and CS6 need to uninstall

I have Adobe Bridge CS5 and CS6 that I need to uninstall off my mac I do not have Adobe Uninstall in the Utilities folder. Question how do I uninstall the applications

Question how do I uninstall the applications
CS6 uninstall is in the folder of Photoshop itself in the applications folder, I suspect CS5 also has this but can't check myself.

Hi, my old laptop has died, and I need to set up my ipod on my new one, can I do this without losing all the music on it, as some of them are from old cd's I no longer have??

Hi, my laptop died recently, and I have purchased a new one, I want to connect my ipod to it to synch to Itunes but I don't want to lose everything on it, as some are cd's I no longer have, is there a way of synching without losing everything x

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Can I have CS5 AND CS6???

Hello everyone. I noticed when upgrading to LR4, that LR3 is still functional. If I get CS6, will it "absorb" CS5 or will it still be a seperately accesible program as well?
Thanks

Almost all versions of Adobe software install into their own folders so you can run previous versions of the software at any time.
In the case of Photoshop and the other flagship titles, you could have several versions, stretching back 10+ years, installed and ready to launch if your operating system supports them
The latest versions don't install over the top of previous versions.
This is essential for things like some plugins which may not be compatible with the very latest Adobe version but do work with a previous version.

We have CS5 and CS6 and we want to swap the PCs the PCs over that they are installed on.

How do we do that. We do not have the CS5 media only the serial number.

If all you want to do is install CS6, then having the CS5 serial is sufficient. It wil lbe requested for verification of upgrade installs...
Mylenium

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Problem : Have Master Suite CS5 and CS6 on same PC... CS5 defaulting to CS6

I have a number of Premiere CS5 projects on my PC... I've installed a trial of Master Suite CS6 and all my CS5 projects are opening in CS6.. which I don't want.
Any suggestions on how I can have them open in CS5 again? I'd prefer to have the Premiere, After Effects and Photoshop files all open in CS5 if that is what I created them in. I've been told I can both CS5 and CS6 on the same machine without problems. Thanks for any input.

Windows file assocations are set according to the last program installed
You may go to http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US and search for a Microsoft article on how to set file--program assocations

Warning CS4 CS5 and CS6 Photoshop Action Users

Adobe introduce the Adjustment Panel in CS4 and included two option that you should NEVER CHANGE from their default setting. For if either or both are change from their default settings some actions that add adjustment layers will fail to work properly. They may or may not produce error pop-ups.
I have been trying to get this fixed for a couple of years now. The other day I received an e-mail from an Adobe programmer informing me that he had been assigned the task to fix the problems I've been having. He included information he was considering. It was clear he did not fully understand the problems and that keeping one of the options would make it impossible to maintain compatibility with previous versions of Photoshop. I wrote two e-mails explaining the problems and a third detailing what the problems I saw with what was proposing. He wrote back the all he wanted to do was to work on part of the problem not the whole problem. I wrote a fourth note but Adobe is back is stealth mode.
The two options in the Adjustment Panel fly-out menu are:
"Add Layer Mask by Default" checked by default. This is how Photoshop always worked prior to CS4 there was never an option not to add one so nothing was ever recorded whether or not a layer mask was to be added they always were. Changing this will make Photoshop not backward compatible.
"Clip to Layer" not checked by default. There has always been an option to clip adjustment layers to the previous layer. So when the option is used the action recorder records the option "With Clipping Mask" in the make adjustment layer step. When the Adjustment Layer is not clipped the option "with Clipping Mask" is not recorded. In the past these recordings played back correctly and still do if the Adjustment Panel fly-out option "Clip to Layer" is not checked. However if Adjustment Panel option is checked even though is was nit when the action was recorded for the option "With Clipping Mas" is not recorded Photoshop clips the layer because of the Adjustment Panel current Option setting. That could be fixed. The current option setting has no meaning in this context in fact the Adjustment panel may not have even been used to recode the Make Adjustment Layer step.
Here is a link to a simple action recorded in CS6. It opens a new default size document add an Levels Adjustment Layer deletes the layer mask and then clips the adjustment layer to the previous layer. The Action will play correctly in all versions of Photoshop prior to cs4. It will fail in CS4, CS5 and CS6 if either or both of the Adjustments Panel fly-out options are changed from their default setting. http://www.mouseprints.net/old/dpr/CS6AdjLayer.atn

Generally, you would have got the option to remove the old versions. However, you can uninstall the old versions but you should do it from Windows Add/Remove modules in the Control Panel so that it doesn't remove the common files from your machine.
If you are not constrained by disk space then the best thing is to leave the old programs on the system until you are familiar with the new features of the upgraded program.
I have renmoved the old programs from my Windows 7 because I wasn't using them. These days I use "Corel Paintshop Pro X5" and "Corel Draw Graphics Suite X6".
Photoshop is for something I need to test for my colleagues who are not familiar with certain features in Corel so I tell them how to do it in PS CS6.
Hope this helps.

InDesign CS5 and CS6 Scripting Changes/Incompatibilities

I'm new to InDesign scripting and need to write a very complex Javascript for InDesign using the Toolkit. My concerns are if CS5/5.5 users will be able to run the script written for CS6. Are there known incompatibilities with the different releases? If so, where can I find a document to compare the differences. I will probably need to support both CS5 and CS6 (and anything in between), so a possibly solution may be to build for CS5, but if I do, will I be missing out on any key new features of CS6?

There are differences from 1 DOM version to another and they can and will break your script if you haven't designed it to handle them. For example:
If you want to use script labels like me (because they are awesome) the following will break if you use CS5 or later:
app.activeDocument.pageItems.item("myLabel").remove();
So you'd have to force the DOM to V6.0. But when doing so remember to revert back to the original version after you're done or you'll create bigger problems. This can be done like this:
app.scriptPreferences.version = 6.0; // CS4's DOM version
app.activeDocument.pageItems.item("myLabel").remove();
app.scriptPreferences.version = 10.2; // Current CC DOM version
This is very inconvenient (for me at least), so I wrap functions that require DOM changes with a custom version changer to handle this for me. In regards to a list of incompatibilities? Not sure, maybe someone here has one, I know Jongware has a website with all the DOM changes from 1 version to another. This can be found here:
Indesign JavaScript Help
Hope this helps.
Brett

Open Photoshop CS5 and CS6

I can't open Photoshop CS5 and CS6 versions simultaneously. When I launch CS6, and then CS5, it takes me to CS6, and vice versa.
Is it possible to keep open the two versions? With Indesign I can do it.

As far as I know that is normal behavior: only one instance of Photoshop at a time. Forum members have reported running two versions of Photoshop simultaneously using virtual machines on their computer (which emulate separate computers).

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

I have cs5 and when I try to download a raw file from my Nikon 810 an error message says this versioln of raw doesn't support this camera model. Yet I just updated cs5 online.

I have CS5 and when I try to download a raw file from my Nikon 810 I get an error message saying this version of raw doesn't support this camera model. Yet I just updated CS5 online.

I do not use lightroom and I have a subscription so I can open all supported RAW formats. You will need DNG file for Your Camera's NEF files for use in Photoshop ACR version. You can open your NEF files in LR it seems so you could do all your raw conversion with Lightroom and save out Tiff files for processing in Photoshop. I do use lightroom for I do not need its library. Lightroom does not support layered files so lightroom is of no value to me. ACR UI is all I need having a second interface to Adobe Raw Conversion Engine would more annoyance than value to me.

Have CS5 and CS6. Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

Similar Messages

Maybe you are looking for