Have just downloaded the new iSO6 and now my facetime will not work. I have checked the settings and all looks fine. Any ideas on how to solve this problem?
Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari
Similar Messages
-
I have an iphone 3 and I have just updated my software to IOS5, my phone now says no service and no sim and everything appears to have disappeared. what can I do
was ur phone previously jailbroken and Unlocked using this method?
-
How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?
My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.
-
Everything was working fine and when I switched from email back to Firefox the problem started. Nothing new had been added before it experienced this problem. I also have IE on the computer, so I can get to this site.
You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.
-
My almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
GersomMy almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
Gersom -
I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. ThanksI have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac -
Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.
No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?
Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone -
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
-
The headphone jack on my macbook air isn't working. I have plugged in two headphones and both won't work although they do work on other devices. Any ideas on how to resolve this problem?
update to latest OSX 10.9.3
reset SMC , you likely put your Air into sleep mode with phones attached.
update the OSX to fix the issue. -
Directx 11 and now Premiere CS5 will not work.
I finally got my ATI 5770 working with Directx 11 and now Premiere CS5 will not work
I just installed what I thought was Directx 11. The latest file update I downloaded is only 9. dxwebsetup.exe from Microsofts web.
I have a Dell XPS 8100. I was on the phone with AMD/ATI, DELL, and XFX. Dell said the card was an ATI, and AMD/ATI said that ATI now just makes the chips. I tried Sapphire ATI 5770 and they didn't work, then I tried a program the took off all the drivers and I got the Dell drivers from the web, thinking that they are on OEM and with the DP Adapter, I finally got the 3rd ATI Eyefinity monitor to work. I tried Cuty of Duty and it worked for a couple of minutes. I'm not into games, but I like the three monitors for learning software. One monitor is the video training and one is the software and the other is the Internet or an ebook.
Now Premiere doesn't like anything. I tried going back to one monitor, and different resolutions. I had two monitors working at one time on this computer. I like the Time line monitor window on it's own monitor and the rest of Premiere on the left monitor.
I was reading that Premiere likes 1280 x 900. That is not a mode on the ATI 1280 x 960 or 1280 x 1024.
Could it be the latest Directx it installed or the fact the Display Port is in the card? -
Tried to in stall the latest update.. now my ipad will not work at all!
Tried to install the latest update.. now my ipad will not work..
samanthafaith wrote:
I have the ipad 4th generation. I tried installing the latest version and the screen came up with the arrow and itunes sign. Im pretty sure I have the latest version of itunes. After I tried restoring it on my coumpter it now has an apple logo staying on the screen.
That would be the indication of Recovery Mode. You can try instructions from this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If you attempt it a couple of times and it does not complete, then make an appointment at the Genius Bar of the nearest Apple Store, or Apple Service Provider to check for hardware problems. -
I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!
Have you installed something called "CleanMyMac?"
Maybe you are looking for
-
Safari and iTunes download isn't working. Anybody help?
Safari and ITunes isn't working, can anyone help? Apps aren't able to open to www.
-
Proxy object and entity Bean interaction
Hello, I'd like to have some precisions on the interactions between the proxy object (client) and the entity bean(server): - does J2EE provides ways for a bean to manage clients, to define roles and permissions, lock, etc ... ? What informations an e
-
Crashing when calling a copied number
Hi, I am Aamir Tariq and I have iPhone 5s with iOS 8.1 installed. Today I am experiencing problems with one particular feature. I will one more feature problem because I think thats another software problem. I have to mention my country because the p
-
HI ALL I HAVE ONE FIELD, ITS VALUE IS '500632732008' AND ITS DATA TYPE IS CHAR. I WANT TO REMOVE '2008' FROM THE VALUE. WHAT SHOULD I DO? PLZ HELP ME.
-
Windows xp ticket cache read causes crash
UPDATE Old title: Error calling function Protocol status: 1312 FormatMessage failed with 1815<br> <br> I have written an application that authenticates to kerberos using the KerberosLoginModule. It used to work fine on all OS�s. (Windows 98, 2k, xp a