Have Melodyne/Rewire file bugs per Logic 8 been fixed?

I'm about to do a clean install of Leopard on my system drive (and the online upgrade to 10.5.3), followed by installation of Logic Pro 8.0.2 and Melodyne Studio 3.2.2.2. Trusted users on this forum have reported problems with Logic following installation of the Melodyne Bridge and/or Rewire files.
I'm wondering whether these bugs have been fixed and whether the Melodyne Bridge is now working and crash-free in Logic 8 -- assuming one is running Melodyne 3.2.2.2 or, according to the tech at Celemony/Melodyne, any version of Studio 3.2.2.0 or later.

The problem is nothing to do with Logic as such. The problem is with the Melodyne Rewire stuff on Leopard.
I think Celemony have a forum - might also be worth asking over there. I know they have issued an update recently, so they might have fixed it...

Similar Messages

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

Mj
Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
Regards,
Joseph

I have several Files created in Logic Audio for windows bfreo v 5 wich can't open in Logic Pro X. Any ideas for a solution to his problem,

I have several Files created in Logic Audio for windows before v5.5.1 which can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK. I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
Swingtones

If you can open the windows files in windows you can bounce the tracks out as audio. Then load them in X

So a number of my apps (ie., United, ES File Explorer, etc..), which worked a few days ago, are now crashing on start-up or shortly thereafter. Have you recorded this bug and is a fix forthcoming? Anxiously awaiting an update.

So a number of my apps (ie., United, ES File Explorer, etc..), which worked a few days ago, are now crashing on start-up or shortly thereafter. Have you recorded this bug and is a fix forthcoming? Anxiously awaiting an update.

There are a number of threads about this issue on the forum if you want to do a search. Basically, you need to uninstall the latest update to Android System Webview:
http://www.droid-life.com/2015/04/27/apps-crashing-android-system-webview/#more-166266

Concerned about losing 7 Express files when installing Logic 8

Will my Logic Express 7 files be deleted or corrupted when I install Logic 8?
From, "Before You Install Logic Studio":
WARNING: If you have installed Logic Express or Logic Pro 7 on your computer, the Logic Studio installer will delete some of the files in the Logic 7 factory content folder: Files with names identical to the default Logic 7 factory content files are deleted. Files with different names are moved to a new folder, called Previous Logic Settings. Logic Studio uses a new location for impulse response settings; Logic Pro 7 impulse response files remain unaffected. An existing installation of the Logic Express or Logic Pro 7 application will not be deleted by Logic Pro 8, allowing you to continue working with it.

Corrupted? I don't see why it would corrupt files per se. But if you want to be totally safe about things, make a backup first. Don't just install the new software and "hope for the best", cuz Murphy's Law is guaranteed to take effect. Back up first, install new software, play around with it. If something ends up sounding funky or whatever you can always access your original files from the backup.

Why does file-selector crash Logic?

I have read numerous posts on this subject here earlier but none of the fixes work on my system. The bug appears from time to time as a crash caused by an action that opens the OS's file selector. That is, boucing, importing, save as, save as project etc. It seems to occur when song files have been worked on for a while and grown in size. It seems I can reset the system by restarting, opening my autoload and perform an action that brings the file selector up. I haven't had this kind of unexpected quit on an empty autoload file. After this the problem will be gone for a while.
People have removed the bug in different manners and it seems it occurs for various reasons but I'm still to find a common feature among the articles I've read that leads me to the underlying cause of the problem, thus giving the solution for my specific version of it. The fix involviong removal of two specific files from an inputmanagers-folder in library doesn't work for me as I have no such files/folders. Somebody mentioned they got rid of the bug after running System Optimizer. That didn't work for me either. One even mentioned he'd got the bug after installing a shareware app to freshen up the mac's appearence for his girlfriend. I have a girlfriend but she has her own mac and mine looks good enough for me as it is.
Apple Logic phone-support has no files on the issue.
I use a minimum of 3rd party plugins (mostly Kontakt2 and Altiverb) and none of them seem to be directly linked to the problem as I have had it occure without any of them loaded.
None of the people that posted question on this issue anywhere I've read has fixed it by reinstalling anything, trashing prefs/caches, repairing permissions or creating new users.
I'm on a tight deadline so doing an archive and install of the os is completely oout of the question.
It has been quiet on this issue for a while and I wonder how people are doing? Are you bug free and how did you manage it?
I'm on OSX 10.4.8, Logic 7.2.3 and I use a MOTU 828mkII
Regards
Ginge

I have read numerous posts on this subject here earlier but none of the fixes work on my system. The bug appears from time to time as a crash caused by an action that opens the OS's file selector. That is, boucing, importing, save as, save as project etc. It seems to occur when song files have been worked on for a while and grown in size. It seems I can reset the system by restarting, opening my autoload and perform an action that brings the file selector up. I haven't had this kind of unexpected quit on an empty autoload file. After this the problem will be gone for a while.
People have removed the bug in different manners and it seems it occurs for various reasons but I'm still to find a common feature among the articles I've read that leads me to the underlying cause of the problem, thus giving the solution for my specific version of it. The fix involviong removal of two specific files from an inputmanagers-folder in library doesn't work for me as I have no such files/folders. Somebody mentioned they got rid of the bug after running System Optimizer. That didn't work for me either. One even mentioned he'd got the bug after installing a shareware app to freshen up the mac's appearence for his girlfriend. I have a girlfriend but she has her own mac and mine looks good enough for me as it is.
Apple Logic phone-support has no files on the issue.
I use a minimum of 3rd party plugins (mostly Kontakt2 and Altiverb) and none of them seem to be directly linked to the problem as I have had it occure without any of them loaded.
None of the people that posted question on this issue anywhere I've read has fixed it by reinstalling anything, trashing prefs/caches, repairing permissions or creating new users.
I'm on a tight deadline so doing an archive and install of the os is completely oout of the question.
It has been quiet on this issue for a while and I wonder how people are doing? Are you bug free and how did you manage it?
I'm on OSX 10.4.8, Logic 7.2.3 and I use a MOTU 828mkII
Regards
Ginge

Bug in Logic Pro?

Hello, I have experienced a strange behaviour. Please try the following things:
1. Create a project which uses Space-Designer Plugin for a Audio Track
2. Save Project and Close Logic
3. Start Logic again and open the project
4. Bounce the project BEFORE doing anything else, espacially don't start playback (PCM, Offline, whole project)
If I do that, the bounced file is rendered without the Space-Designer effect. It seems, that the Space-Designer is only rendered, if playback has been started once.
Do you have the same problem?
Thank you very much,
Tobias

Tobias wrote:
these things you describe I have not experienced till
now - but it doesn't make things better. To we have
to accept these bugs? I have paid a lot of money for
the software... the least thing is to try to "report"
the bug.
True, acknowledging the bugs doesn't make the situation any better in the immediate. But there are many benefits to posts such as yours in bringing the buggy/errant behaviors to light; I strongly believe that as important as it is for people to know how the program works, it's equally important for them to be made aware of the ways in which it is broken, unpredictable, or otherwise buggy. In this way, people can avoid invoking features or otherwise using the program in ways that are known to cause problems.
I would like to suggest that you not only file a bug report at the Logic Feedback webpage, but also post your bug on the bug report/workaround section of www.logicprohelp.com
You wrote, "we have to accept these bugs?" In a sense, yes, because Apple/Logic does not often release patches or bug-fixes, even for long-standing yet minor bugs. Assuming that your problem is indeed a problem and not pilot error, about the only thing you can do is make both users and the company aware of the problem and wait/hope for a fix.

Customer exists for displaying monthly bugs per release

I hav only little know ledge in ABAP. I hav to code for a variable, that has to display monthly incoming bugs per release.
Dim Product
Info Productrelease
based on this i hav to display the data in report like this
created week               2005.03 ...... 2006.03 2006.06 2006.09....
06/17/2006                   32                   34              343         4324
06/24/2006                   43                   45               56            454
please specify a solution.
Thanks in advance
james

I hav a cube with tech name zssen
in that cube product is a Dimension with technical name zprdpid
in that dimension i hav a infoobject called product description.
product contains different like embedproducts like vg1, vg2 vg3 and so on
productrelease contains descriptions of releases 233.1 32.3 3443.34 and so on
each new release i hav to create to restricted key(2006.09) figure based on the variable created on product release(for example 2006.09 ).
instead of above procedure i have to create a new variable that has to automatically recognise the new version and it has to display on the report.
please suggest me how to write the code for above scenerio.
if u want a detailed description i will send a mail.
please leave your mail id if possible.
Thanks,
James

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

Non root user can delete root files, bug?

We're having an odd permissions based problem on Solaris 10 u5 x86_64, (new install, fully patched as of 2 days ago) It means that non root users can delete root owned files, which is something I've never seen before, and I've been doing this for almost 10 years.
We're installing into an 80Gb container on VMware ESX server 3.0.1. The OS takes 20Gb (2 processors, 4Gb memory, 8Gb swap) most of the remaining 60Gb is being used as both file systems and raw devices under disksuite as soft partitions. It's one of the file systems, /apps (where we plan to install sybase) that is giving us "issues"
Essentially:
# more /etc/vfstab |grep apps
/dev/md/dsk/d0 /dev/md/rdsk/d0 /apps ufs 2 yes -
# newfs -v /dev/md/rdsk/d0
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d0 last mounted as /apps
newfs: construct a new file system /dev/md/rdsk/d0: (y/n)? y
mkfs -F ufs /dev/md/rdsk/d0 20971520 -1 -1 8192 1024 264 1 546 8192 t 0 -1 8 7 n
/dev/md/rdsk/d0: Unable to find Media type. Proceeding with system determined parameters.
Warning: 4096 sector(s) in last cylinder unallocated
/dev/md/rdsk/d0: 20971520 sectors in 3414 cylinders of 48 tracks, 128 sectors
10240.0MB in 214 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
20055584, 20154016, 20252448, 20350880, 20449312, 20547744, 20646176,
20744608, 20843040, 20941472
# mount /apps
# ls -al /apps
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm *
rm: lost+found is a directory
sol10% rm -rf *
rm: cannot read directory lost+found: Permission denied
sol10% ls -al
total 20
drwxr-xr-x 3 root root 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
sol10% exit
sol10% logout
# chgrp sybase /apps
# chmod g+w /apps
# ls -ald /apps
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 /apps
# ls -al /apps
total 20
drwxrwxr-x 3 root sybase 512 Sep 10 12:31 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
drwx------ 2 root root 8192 Sep 10 12:31 lost+found
# su - sybase
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
sol10% cd /apps
sol10% rm -rf *
sol10% ls -al
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
sol10% id
uid=***(sybase) gid=***(sybase)
sol10% exit
sol10% logout
# pwd
# ls -ald /apps
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 /apps
# ls -al /apps
total 4
drwxrwxr-x 2 root sybase 512 Sep 10 12:34 .
drwxr-xr-x 38 root root 1024 Sep 10 12:09 ..
It's a new "bare metal" (in as much as there is no metal) install. I created the sybase user from scratch by hand editing passwd, group and shadow, buy copying and pasting the data out of the NIS maps. All I've done besides the install & patch is setup networking manually, and created the metadb's and the soft partitions and the mount points & newfs'ed & mounted three of them . I then changed ownership of /apps to be sybase:sybase, and handed it to the database team for the sybase install. they came back and said "should we be able to do this?" as they habitually run rm rf * knowing they can't delete root owned files, only now they can... This is true even if I just chgrp the directory and give them group write permissions. They can still delete anything owned by root, even if it doesn't have group permissions just like the lost+found directory. No other "real" machine we have, x86 or SPARC does this, but we've never installed u5 before either.
As you can imagine losing the lost+found directory is a bit of a problem, however what's really worrying me is if they can do that, what happens when they run sybase as the sybase user? If it borks can they trash the OS and write/overwrite random files?
It's a VM, so in as much that's not a problem, but the reason it's a VM is somebody wants to send a VM to a client as a demo, and at present it's highly unstable IMO.
Does anyone have any idea where to start? My thoughts are that it may be a VMware issue, (though the hardware and the guest OS is supported) it could be a bug, because I've never seen that weird newfs error before, and then I found this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6622243
Or it could be me, and the fact that I'm hand configuring it, and u5 now requires I do it "properly" with useradd, etc. I'd like to test, but the guy wants it built, and wants it now, so I patched it up, and gave it back to the database team and told them to be careful.
I'd be interested in you opinions regardless.
The full spec of the "machine" is below, sol10 is not it's name for obvious reasons, and I've hashed out the ID & GIUD for similar reasons.
# uname -a
SunOS sol10 5.10 Generic_127128-11 i86pc i386 i86pc
# prtdiag
System Configuration: VMware, Inc. VMware Virtual Platform
BIOS Configuration: Phoenix Technologies LTD 6.00 09/06/2007
==== Processor Sockets ====================================
Version Location Tag
Pentium(R) Pro CPU socket #0
Pentium(R) Pro CPU socket #1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
DRAM in use 0 RAM slot #0 RAM slot #0
DRAM in use 0 RAM slot #1 RAM slot #1
DRAM in use 0 RAM slot #2 RAM slot #2
DRAM in use 0 RAM slot #3 RAM slot #3
==== On-Board Devices =====================================
VMware SVGA II
ES1371
==== Upgradeable Slots ====================================
ID Status Type Description
0 unknown ISA ISA Slot J8
0 unknown ISA ISA Slot J9
0 unknown ISA ISA Slot J10
1 in use PCI PCI Slot J11
2 in use PCI PCI Slot J12
3 in use PCI PCI Slot J13
4 available PCI PCI Slot J14
# dmesg
Wednesday, 10 September 2008 15:33:35 BST
Sep 10 10:17:44 sol10 busra: [ID 490441 kern.info] NOTICE: ndi_ra_free: bad free, dip ffffffff803807a8, resource type memory
Sep 10 10:17:44 sol10 busra: [ID 883242 kern.info] NOTICE: ndi_ra_free: freeing base 0xe0000, len 0x4000 overlaps with existing resource base 0x0, len 0xf4000000
Sep 10 10:17:44 sol10 rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 Rev. 1 LSI, Inc. 1030 found.
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci1000,30 (mpt) instance 0 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0 Firmware version v0.0.0.0 (?)
Sep 10 10:17:44 sol10 scsi: [ID 365881 kern.info] /pci@0,0/pci1000,30@10 (mpt0):
Sep 10 10:17:44 sol10 mpt0: IOC Operational.
Sep 10 10:17:44 sol10 pci: [ID 370704 kern.info] PCI-device: pci1000,30@10, mpt0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mpt0 is /pci@0,0/pci1000,30@10
Sep 10 10:17:44 sol10 scsi: [ID 193665 kern.info] sd0 at mpt0: target 0 lun 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci1000,30@10/sd@0,0
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /pci@0,0/pci1000,30@10/sd@0,0 (sd0) online
Sep 10 10:17:44 sol10 unix: [ID 190185 kern.info] SMBIOS v2.31 loaded (1695 bytes)
Sep 10 10:17:44 sol10 genunix: [ID 408114 kern.info] /cpus (cpunex0) online
Sep 10 10:17:44 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dld0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Sep 10 10:17:44 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 1
Sep 10 10:17:44 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 1
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: keyboard@0, kb8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] kb80420 is /isa/i8042@1,60/keyboard@0
Sep 10 10:17:44 sol10 i8042: [ID 526150 kern.info] 8042 device: mouse@1, mouse8042 # 0
Sep 10 10:17:44 sol10 genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042@1,60/mouse@1
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:44 sol10 unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: x86 (GenuineIntel family 6 model 15 step 8 clock 2000 MHz)
Sep 10 10:17:47 sol10 unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(r) CPU E5335 @ 2.00GHz
Sep 10 10:17:47 sol10 unix: [ID 557827 kern.info] cpu1 initialization complete - online
Sep 10 10:17:47 sol10 rootnex: [ID 349649 kern.info] iscsi0 at root
Sep 10 10:17:47 sol10 genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Sep 10 10:17:52 sol10 genunix: [ID 454863 kern.info] dump on /dev/dsk/c1t0d0s1 size 8197 MB
Sep 10 10:17:53 sol10 pci: [ID 370704 kern.info] PCI-device: pci8086,7191@1, pci_pci0
Sep 10 10:17:53 sol10 genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,7191@1
Sep 10 10:17:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:17:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:17:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:17:54 sol10 pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Sep 10 10:17:54 sol10 genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:17:55 sol10 pseudo: [ID 129642 kern.info] pseudo-device: power0
Sep 10 10:17:55 sol10 genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:17:56 sol10 rootnex: [ID 349649 kern.info] xsvc0 at root
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Sep 10 10:17:56 sol10 genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Sep 10 10:17:56 sol10 genunix: [ID 846691 kern.info] model VMware Virtual IDE CDROM Drive
Sep 10 10:17:56 sol10 genunix: [ID 479077 kern.info] ATA/ATAPI-4 supported, majver 0x1e minver 0x17
Sep 10 10:17:56 sol10 pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@7,1/ide@0
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:17:56 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:17:56 sol10 scsi: [ID 193665 kern.info] sd1 at ata0: target 0 lun 0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@7,1/ide@0/sd@0,0
Sep 10 10:17:56 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 1
Sep 10 10:17:56 sol10 isa: [ID 202937 kern.info] ISA-device: fdc0
Sep 10 10:17:56 sol10 fdc: [ID 114370 kern.info] fd0 at fdc0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f0/fd@0,0
Sep 10 10:17:56 sol10 genunix: [ID 314293 kern.info] device pciclass,030000@f(display#0) keeps up device sd@0,0(sd#1), but the latter is not power managed
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:17:56 sol10 pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Sep 10 10:17:56 sol10 genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:17:57 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pool0
Sep 10 10:17:57 sol10 genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Sep 10 10:17:57 sol10 ipf: [ID 774698 kern.info] IP Filter: v4.1.9, running.
Sep 10 10:18:05 sol10 nfs4cbd[395]: [ID 867284 daemon.notice] nfsv4 cannot determine local hostname binding for transport tcp - delegations will not be available on this transport
Sep 10 10:18:10 sol10 sendmail[598]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:10 sol10 sendmail[600]: [ID 702911 mail.crit] My unqualified host name (localhost) unknown; sleeping for retry
Sep 10 10:18:17 sol10 mac: [ID 736570 kern.info] NOTICE: e1000g0 unregistered
Sep 10 10:19:10 sol10 sendmail[598]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:19:10 sol10 sendmail[600]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Sep 10 10:20:10 sol10 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Sep 10 10:20:10 sol10 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Sep 10 10:24:54 sol10 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Sep 10 10:24:54 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,100f (e1000g) instance 0 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Sep 10 10:24:54 sol10 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network Connection, Driver Ver. 5.1.11
Sep 10 10:24:59 sol10 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100f - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.
Sep 10 10:28:21 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:35:17 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: lp (ecpp) instance 0 vector 0x7 ioapic 0x2 intin 0x7 is bound to cpu 1
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: ecpp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ecpp0 is /isa/lp@1,378
Sep 10 10:35:17 sol10 pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Sep 10 10:35:17 sol10 pcplusmp: [ID 398438 kern.info] pcplusmp: asy (asy) instance #1 vector 0x3 ioapic 0x2 intin 0x3 is bound to cpu 0
Sep 10 10:35:17 sol10 isa: [ID 202937 kern.info] ISA-device: asy1
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] asy1 is /isa/asy@1,2f8
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: nvidia255
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] nvidia255 is /pseudo/nvidia@255
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: llc10
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: profile0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: ucode0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] ucode0 is /pseudo/ucode@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Sep 10 10:35:17 sol10 pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Sep 10 10:35:17 sol10 genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 10:55:50 sol10 genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Sep 10 10:55:50 sol10 genunix: [ID 882269 kern.info] PIO mode 4 selected
Sep 10 11:28:55 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 12:28:56 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 13:29:01 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 14:29:10 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
Sep 10 15:29:38 sol10 in.routed[502]: [ID 798604 daemon.error] empty response from 129.0.1.124
# prtconf
System Configuration: Sun Microsystems i86pc
Memory size: 4132 Megabytes
System Peripherals (Software Nodes):
i86pc
scsi_vhci, instance #0
isa, instance #0
i8042, instance #0
keyboard, instance #0
mouse, instance #0
lp, instance #0
asy, instance #0
asy, instance #1
fdc, instance #0
fd, instance #0
pci, instance #0
pci15ad,1976 (driver not attached)
pci8086,7191, instance #0
pci15ad,1976 (driver not attached)
pci-ide, instance #0
ide, instance #0
sd, instance #1
ide (driver not attached)
pci15ad,1976 (driver not attached)
display, instance #0
pci1000,30, instance #0
sd, instance #0
pci15ad,750, instance #0
iscsi, instance #0
pseudo, instance #0
options, instance #0
agpgart, instance #0
xsvc, instance #0
objmgr, instance #0
acpi (driver not attached)
used-resources (driver not attached)
cpus, instance #0
cpu (driver not attached)
cpu (driver not attached)
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 10440 alt 2 hd 255 sec 63>
/pci@0,0/pci1000,30@10/sd@0,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1t0d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1t0d0s3 is currently mounted on /usr. Please see umount(1M).
/dev/dsk/c1t0d0s4 is currently mounted on /var. Please see umount(1M).
/dev/dsk/c1t0d0s5 is currently mounted on /opt. Please see umount(1M).
/dev/dsk/c1t0d0s6 is part of SVM volume sp:d8. Please see metaclear(1M).
/dev/dsk/c1t0d0s7 contains an SVM mdb. Please see metadb(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 10440 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 131 1.00GB (131/0/0) 2104515
1 swap wu 132 - 1176 8.01GB (1045/0/0) 16787925
2 backup wm 0 - 10439 79.97GB (10440/0/0) 167718600
3 usr wm 1177 - 1829 5.00GB (653/0/0) 10490445
4 var wm 1830 - 2091 2.01GB (262/0/0) 4209030
5 unassigned wm 2092 - 2614 4.01GB (523/0/0) 8401995
6 unassigned wm 2617 - 10439 59.93GB (7823/0/0) 125676495
7 unassigned wm 2615 - 2616 15.69MB (2/0/0) 32130
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> q
# metastat -p
d8 -p c1t0d0s6 -o 109973513 -b 61440
d7 -p c1t0d0s6 -o 109461512 -b 512000
d6 -p c1t0d0s6 -o 109051911 -b 409600
d5 -p c1t0d0s6 -o 88080390 -b 20971520
d4 -p c1t0d0s6 -o 67108869 -b 20971520
d3 -p c1t0d0s6 -o 46137348 -b 20971520
d2 -p c1t0d0s6 -o 41943043 -b 4194304
d1 -p c1t0d0s6 -o 20971522 -b 20971520
d0 -p c1t0d0s6 -o 1 -b 20971520

An easy way to think of it is this -- everything in Unix is a file. Including directories; they are just a file which contains a list of the files in that directory, and pointers to them.
If the 'sybase' user has write permission on the directory, they have permission to edit that "list", and can add or remove files to the list. It doesn't matter who the files on the list belong to, because the files are not what is being modified. Only the list of files is being modified. (Of course, in Unix, if you erase the file's listing from all of the lists it's on, the file itself goes away for housekeeping purposes.)
One thing that would have stopped the 'sybase' user from removing the lost+found directory is if that directory itself had files in it -- without write permission to the lost+found directory, that user could not have removed those files, and since one cannot remove a non-empty directory, that operation would have failed. Since lost+found was empty in this case, it could be removed simply by having permission to write to the /apps directory.
This behavior does change if you set the sticky bit on the directory -- in that case, files may only be removed by the owner of the file or directory, or if the user has write permission to the file. This would have prevented the sybase user from removing the lost+found directory. (Note, this also applies to the 'rename' function call.) This would probably be the best way to handle your situation, since you apparently do want the sybase user to be able to add files to /apps, but do not want them to be able to remove lost+found.
Edited by: MadBishop on Sep 12, 2008 7:46 AM

My membership is up in July & I would like to update my files as per instructions from adobe.

My membership is up in July & I would like to update my files as per instructions from adobe. However the program will not let me. I will have money to upgrade membership for another year soon.
what can I do in the meanTime????????
Peter Spier,
I have been trying to download InDesign and Photoshop for a long time. However, I found out that the programs that I have were all ready installed when I was given the computer. I got in touch with the people and through some questions it was discovered that I need to have Windows 7 for the programs to be compatible. I sent the 11 page Upgrade Advisor Report to Boston for review. Give me a few days to see if I can resolve the problem. Then I will get in touch with you to see what you recommend.
Thank you.
Donna Rottman

OK.
To avoid confusion, I think we should keep all of this in one thread: http://forums.adobe.com/message/6029742#6029742
I'm going to coppy the above information and post it there, then lock this thread. If you need to respond you can use the link you will find at the top of the new email you will get when I post in the other thread.

Is it safe to have the swap file on a separate partition?

I've just bought a second hand MBP 2012 (9,2 I think) with a 500GB hard drive and Yosemite pre-installed. Not going to get into a debate about it here, but I want to regress to Lion or Mountain Lion until Apple improves Yosemite's bugs and software manufacturers improve compatibility. However, I wouldn't mind also getting to know Yosemite. So my plan is to partition my drive and keep Yosemite on one partition, have Lion on the other, and use Lion for day to day stuff for the time being.
Obviously this involves a shrinking hard drive. I have an image of Lion's installer on another partition in case I lose the DVD (which happens to me far too often), so at the moment my partition scheme breaks down as 10GB for Mountain Lion's installer, 100GB for Yosemite, and the remaining 390 (roughly) for Mountain Lion.
Since the Yosemite partition is quite small, would it work if I made a symlink from /private/var/vm to the same folder on the Lion partition? Both folders will never be in use at the same time, so I can't think of any reason this wouldn't work - which would mean that the slippage and the swap files would all be located on the bigger partition, and the small size of my Yosemite partition wouldn't be a problem. Obviously when the time comes I would get rid of the Mountain Lion partition altogether and make the Yosemite one a lot bigger, but would that be an ok setup for now? Would it degrade performance for any reason if the swap files were on a separate partition?
Anyone ever tried this?

Thanks for the answer. The project is stored, saved, or burned to a DVD.
When I put the burnt DVD in my "E" drive (or DVD player/burner) installed in my computer it comes up as a my project in "E" drive.
It is a complete Primire Pro CS4 project. I has all my edits and effects just like it does when I open it from my HHD.
I can put the DVD in my wives computer and it shows it is there but it will not open because she does not have CS4 installed.
So it is not a movie. It is an exact copy of what the project looks like on my HHD.
I can edit on it and do everything I did from the HHD copy.
Hope this helps. Please feel free to question my responces.
I really do want to clean up my HHD and start over with a single file. Hopefully gererated by the DVD.
It seems like I could delete my files. It would be like I made this copy and sent it to you to do a final edit and add menus. You would not have the origional files on your HHD.
After you loaded to you could then send it to your HHD and do whatever - Right?
Jim

Logical file name or logical path name incorrectly defined

Dear All,
We are doing archival in our IDES for test purpose before we do it to our Production.
Steps Performed
Copied AM_ASSET archive object to ZAM_ASSET
Logical Path
Logical path    ZAM_ASSET
Name            Asset
Syntax group    UNIX       Unix compatible
Physical path   /archive/test/<FILENAME>
Logical File Name
   Logical file    ZAMASSET
   Name            Asset
   Physical file   FI_<MONTH>_<DAY>.txt
   Data format     ASC
   Applicat.area   AM
   Logical path    ZAM_ASSET
But when we run the WRITE though SARA , in the job log we get the following
Logical file name or logical path name incorrectly defined
When generating a file name for an archive file that is to be created, the system determined that the logical file name FIAA_ARCHIVE_DATA_FILE or the logical path name ARCHIVE_GLOBAL_PATH was defined incorrectly.
But we have maintained a Logical name ZAMASSET , so we are unable to change the location of archived file and as well as the format.
So is there any setting we need to maintain apart from the logical file name and logical file path.
Suggestions are highly appreciated.
Thanks in anticipation

hi,
follow this steps :
- transaction SARA
- enter authorization objects, eg SD_VBAK
- hit button CUSTOMIZING
- Archiving Object-Specific Customizing: execute Technical Setting
- field Logical File Name enter or select ARCHIVE_DATA_FILE
- leave CONTENT REPOSITORY as blank if you are not using 3rd party for storing (eg. IBM Tivoli)
- back to customizing
- from Basis Customizing, execute : Cross-Client File Names/Paths
- on Logical FIle Path Definition, highlight (select) ARCHIVE_GLOBAL_PATH on the right pane
- double click on the Assignment of Physical Paths to Logical Path on the left pane
- double click on OS used, eg. UNIX, define Physical Path where archive file (on WRITE process) will be stored
- save changes made
- double click Logical File Definition, Cross Client on the left pane
- double click ARCHIVE_DATA_FILE on the right pane
- make sure that logical path is already set to ARCHIVE_GLOBAL_PATH
- save changes made
this setting also can be done using transaction FILE
we have experienced on this case using SAP standard archiving (SARA, SARI) and everything is fine with this setting above.
hope it help you.
rgds,
Alfonsus Guritno

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Using File Adapter with Logical Name

I am creating a file adapter with Logical name. Apart from giving the Logical name is there any other configuration that I am suppose to do on the Web Logic before I start using it?
Thanks in Advance.

After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
Thanks,
N

Have Melodyne/Rewire file bugs per Logic 8 been fixed?

Similar Messages

Maybe you are looking for