Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Similar Messages

  • When I purchased my iphone and ipad last week they told me I would connect the ipad to the internet through the phone but can get niether the phone nor the ipad to see the internet?

    When I purchased my iphone and ipad last week they told me I would connect the ipad to the internet through the phone but can get niether the phone nor the ipad to see the internet?

    Connecting the iPad to the internet via the iPhone is done by setting up a personal HotSpot, but you have to have that supported by your carrier and have to have established the account to do so.
    On the  iPhone, Settings > General > Network > Set Up Personal Hotspot

  • Why am I not able to type into my pdf files. Why is the cursor only appearing at he areas where there in no typing? I believe I know who's doing this, but can you fix the problem for me please?

    I cannot type into one of my pdf files. The cursor only appears where there is no typing. I believe there is foul play going on on my computer, Can you fix this problem?

    Hi Donna,
    Let's see if we can get to the bottom of this mystery! I hope it's not foul play.
    You say the problem is with just one of your PDF files? What version of Acrobat/Reader are you using? If you're in Reader, you're limited to commenting/annotating the PDF (you can't edit text with Reader, so you wouldn't be able to select text that's in the PDF already).
    Please let me know what program/tools you're using and we can take it from there.
    Best,
    Sara

  • Is there a way to create three different physical calendars in ical so that I can get a fiscal view of the calendars?

    Is there a way to create three physically different calendars in iCal so that I can view the calendar and events from a fical point of view?

    iCal just shows the calendars you have created in your account(s).  So if you are using iCloud just log into your iCloud account in a web browser and make as many new calendars as you wish to have.  Then enable those in iCal.
    If you use Google accounts or something else for the calendars, then create them as needed, and enable them in iCal.
    I have several separate calendars all displayed in iCal - a couple linked through my Gmail accounts, and one through my iCloud account.  Each uses a different default item color so they are distinct in iCal.

  • Is there a way to split a Muse file so that 2 or 3 developers can work on the project?

    I would like to know if using both Muse and Business Catalyst we can split the work so that 2 or 3 developers can work on the project?  I know that we can use folders for each developer however by doing so it creates an index.html in each of the folders.
    Has anyone been able to create an environment for multiple developers on the same project?

    Hi Gaurav,
    I appreciate the reply.  The thread you provided is not quite what I was looking for.  I have a site that I would like 2-3 Muse developers to work on.  They would each get a piece of the site and we would somehow pull it together into one cohesive program.  For example we have an association made up of 20 villages.  One developer would work on the individual village pages, another on the overall structure of the association and a third work on the Amenities.  Everyone would need to be working at the same time using MUSE.  I don't think we want to be doing any development in BC.
    Anyone else out there who is doing something similar?

  • Airport is on and working, but can't connect to internet with MacBook

    I have a green light on my airport Extreme, my laptop can join my network fine and get 4 bars of connectivity.
    But I cannot get on the internet with my laptop. Websites don't work.
    What am I doing wrong?

    Were you able to copy the DNS addresses to the MacBook? Were you able to delete the incorrect ones? Did you restart the MacBook before trying to access the Internet again?
    How about the IP address for the MacBook? It should be in the address range of 10.0.1.2 - 10.0.1.200. Is it? Of course I'm assuming that you did not change the default DHCP range of your AEBSn. Your iMac should also be assigned an IP in this range.

  • Connected but can not surf to internet with n97wif...

    my n97 has no problem using my home wifi to surf the internet.....
    i want to try to use it to connect to the wifi from Mcdonald....in Brisbane...
    i get the Mcdonald log-in screen and accept the terms and log in OK.....but could not surf the internet....and get the error message....
    I have the same situation when I go to the free wifi in Brisbane library....
    Can anyone please help

    If you are connected, you are connected. What error message do you get? There could be a lot of reasons why surfing fails. Maybe you did'nt order anything and Mac is angry with you.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • I can connect to network, but can't connect to internet with aebs

    so i got a new Airport Extreme Base Station, hoping to replace my old og airport. i can connect to the new AEBS network easily, but i can't connect to the internet. with the old airport, i can connect to the internet no problem, hence i can write this post. "internet connect" tells me:
    +old, space ship looking airport:+
    connected to "myNetwork"
    connected to the internet via ethernet
    +new and improved AEBS:+
    Connected to "myNetwork"
    but that's it. any ideas would be greatly appreciated. oh also, it seems to be running pretty hot. is that normal? thanks!

    Hello mookyee. Welcome to the Apple Discussions!
    It's always a good idea to power recycle all of your network components when changing configurations ...
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop. Thanks

    Hi,
    I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop.
    Thanks

    It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
    For info - Using your Apple ID for Apple services
    For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
    regards
    CCC

  • I have a 15 inch mac book pro running osx 10.5.8. I recently moved to FL and switched to Comcast (only option). Now when I access one of my banks, I can get past the login page and the opening page of my account but the data is unavailable. Bank no help.

    I have a 15 inch mac book pro running osx 10.5.8. I recently moved to Florida and switched to Comcast (the only option). Now when I access my bank website, I can get past the login to my account page but the data is permanently unavailable. The bank says no one else has this problem. Everything is up to date as far as software is concerned. . .I just update anything that comes up. I have not had this problem with this computer anywhere else and I am not having a problem with any other website. I have the problem with both Safari and Google Chrome.

    Harden your Mac against malware attacks

  • I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

    i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

    Hello,
    the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
    >>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
    If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
    Hans-Günter

  • I apparently have 3 apple IDs, and it's making it challenging to set up iCloud. Is there a way to combine them into the one I actually use?

    I apparently have 3 apple IDs, and it's making it challenging to set up iCloud. Is there a way to combine them into the one I actually use?

    You can't combine or merge iCloud IDs, but you can migrate the iCloud data from one account to another if you wanted to move it to a different ID.

  • HT204053 My husband and I share music in one itunes account for  both of our iphones. We just got the new iphone 5s's and iin  ttryinngto back up our old phones I have realized we SHARE one icloud as well. Can I create him a new icloud for  pictures, cont

    My husband and I share music in one itunes account for  both of our iphones. We just got the new iphone 5s's and iin  ttryinngto back up our old phones I have realized we SHARE one icloud as well. Can I create him a new icloud for  pictures, contacts etc

    You can have one icloud account and a different itunes account on the phone. I have my icloud account and a shared itunes account. He does not have to use the new icloud account as is ID in itunes and app store. He can keep using the old one.

  • I traded my iphone in and now have a new one (iPhone 5) with the same SIM.  Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

    I traded my iphone in and now have a new one (iPhone 5) with the same SIM.  Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

    Hi,
    I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
    The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
    This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
    Thank you.

    Thank you for your fast answer Rick.
    I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
    We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
    Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

Maybe you are looking for

  • Delete empty space in PLD footer

    Hello, In my report done with PLD I have the following need: For example the footer contains 3 fields : If the 3 fields contains data, it's displayed like this: Total A Total B Total C If the field Total B doesn't contain any data, it's displayed lik

  • Responsible or Applicant Cost Center in ME21N?

    Hi experts! When you create a PO in ME21N with P account assignment, which is the cost center adopted in the PO, the responsible or the applicant Cost Center informed in the WBS? Thanks!

  • Resolving ip addresses from an iPad

    Hi, I've been given an iPad 3 (wifi version) for work and I'm having trouble getting it to resolve names correctly. I've connected it to a wireless access point and I can navigate around our LAN via IP addresses, but we have a number of web products

  • Incosistencies between Analyzer Server Console and stout.log file

    Hi,<BR><BR>In stout.log file of application server file there is a record:<BR>"Setting Current User Count To: 2 Users. Maximum Concurrent Licensed User Count Is: 10 Users." So 2 licences are ured, but checking "Analyer Server Console" there is only o

  • After updating to version 2014.3 website build crashes on Save or Save As (new name)

    Sequence of events after updating to 2014.3 Opened current build. Muse window said 1234 assets have changed Chose to update assets During review it brought up one item around 17%. I chose to merge with Muse. Completed updating assets Published comple