Have you been having problems with ipod nano 3rd gen?

Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

Similar Messages

  • I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

    I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

    These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
    Good luck,
    Clinton

  • Problems with iPod Nano 6th Gen Playback & Updating

    Hi. I have had a look and can't find another post on this - apologies if I have missed it!
    My problems start before I purchased my new Nano 16GB last week.
    When the last update of iTunes came available, I was unable to install it. The task bar would get to about 50% (although it varied) and would then time out. When I had this problem I tried everything from every forum imaginable, from deleting all Temp files, disabling the firewall and all start up applications and clearing the registry – everything. Nothing worked. Eventually I decided that I should uninstall, then install the new version.
    After a week of the same problems trying to install iTunes, I gave up and downloaded on another computer, and saved the .exe file to a USB stick. This worked until two days after I downloaded it, yet another update came out and I had to start all over again (I didn’t – I am running on 10.1.2.17 still).
    I was concerned when I purchased my new Nano that I would have problems connecting it to iTunes as I was not running the new version – but it was okay. Unfortunately, the iPod requires update 1.1 and I am also having the same problem with this – I get time out error 3259 after sometime trying to download it. And yes, I have tried all the same tricks, but nothing seems to work.
    I am running Vista on a Dell PC, and connect to the internet on a pre-pay internet USB dongle. I can download updates for other programmes, and other files successfully – it is only iTunes that I am having an issue with. ITunes is added to my list of accepted programmes on my firewall, but I disable that when I am downloading.
    Meanwhile! My new iPod is fantastic. Unfortunately I am experiencing an odd problem with it, and cannot seem to find other people with the same issue. The memory is not overloaded (it has 1.10GB of free space on it). I have 1857 tracks on it, and 14 podcasts. I play the music files through the ‘Songs’ menu, on Shuffle mode. For some reason, after playing one or two tracks, it doesn’t seem to want to play the next one. The track will be displayed on the screen, but it does not play. When you look at the song progress bar, it shows that it is part way through the song, but it is not moving. I have tried pressing ‘Pause’ followed by ‘Play’ and nothing happens.
    The only way to get it to start playing again is to skip to the next track, but even this has its issues. Sometimes, when you skip forward a track, it plays a completely different track to the one that is displayed. When you look at the progress bar for the song it is showing, it isn’t moving, but music is still coming out!
    Does anyone have any idea what the issue is, and how I can get the machine to play continuously without having to handle it several times? Please?!

    Hi dianak22!
    I have an article here that can help you troubleshoot to resolve this issue:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    You can also walk through the steps of troubleshooting using the troubleshooting assistant, which can be found here:
    Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Assorted Problems with iPod Nano 4th gen and iTunes

    So i am currently experiencing several problems. Let me break it down so that it might help you understand what's going on.
    #1 When dragging music files to my ipod in itunes, an error message popped up stating some sort of file reading/writing error, i forgot exactly what it said.
    #2 iPod starts randomly reseting itself when it changes to a new song. sometimes reseting itself right after the main menu comes back up. It also does this while connected to my JVC KD-AVX44 stereo in my car via USB and while listening normally by headphones.
    #3 I tried restoring it in itunes, after the restore software was downloaded, an error message appeared stating that the ipod could not be restored.
    #4 itunes begins to not recognize iPod
    #5 itunes freezed when brought up, still not recognizing the ipod.
    #6 itunes crashes? It came up with a window asking for an itunes library to continue, selected just "my music" instead, no files labeled .itl in that. clicked cancel, itunes dosn't come back up.
    I'm hoping there's something simple that i'm missing here, can anyone help?

    I think i'll try reinstalling itunes tonight, i tried using some of the tips in these articles to reinstall my usb drivers etc, as i still can't get my ipod to restore. apple store will be the next step.
    http://support.apple.com/kb/TS1372
    http://support.apple.com/kb/TS1539
    http://support.apple.com/kb/TS1538
    Also, (common question) what's the easiest way to get music into your itunes library automatically if downloading from another source. i just dragged all my previous music from "my music" when i got the nano, i'd just been using WMP before. and i can't seem to find a way to automatically have itunes pick up this stuff. kind of a pain in the behind to drag it all.

  • Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!

    Hello people!
    I just found a solution to connection problems with iPod Nano 3rd generation when connecting it to a Windows Vista machine.
    Because of 'security reasons', Vista asks you to check the drive for errors when connecting the iPod.
    The thing to do here:
    Click the cross to exit the windows; DON'T CLICK 'do not check drive'!!!!
    So just click the red cross to close the window and the iPod should be recognized by iTunes.
    Symptoms:
    - iPod cannot be recognized by iTunes when you connect it.
    - iPod doesn't show up as a drive in Windows Explorer.
    I really really hope I solved your problem. Have fun!
    Jasper

    Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • TS3694 Hi,I have an iphone 3g that is "not" jailbroken,nor have I tried,however,I had been having problems with it shuting down&not starting again so I updated&tried to restore only to have an error 1015.The iphone is now stuck on the connect to itunes,pl

    Hi, I have an Iphone 3g that is "Not" jailbroken, nor do I want it to be jailbroken. However, I had been having problems with it shuting down and not starting again. So, I tried to update and restore only to get an "error" 1015.
    It is now stuck on "connect to itunes"
    Any help would be great as this is a factory unlocked phone

    Apple in no way blocks devices.
    Carriers can blacklist devices from their network.  If that is what has occurred, only the carrier can remove the blacklist.  This should have nothing to do with your ability to activate the device and use it as an iPod.

  • I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

    I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

    Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
    ~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

    Try reinstalling Combo Update.
    http://support.apple.com/kb/DL1676
    Best.

  • Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Then the next step would be a restore as new to rule out corruption in the backup.

  • My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

    My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
    Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
    Skip

    I am having lot's of lag time with Safari, etc..
    I'll type in a website.. and it will take 15-20 seconds to start..
    Start time: 17:51:37 12/02/14
    Model Identifier: MacBookPro11,3
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 14 days 3:02
    USB
       My Passport 07B8 (Western Digital Technologies, Inc.)
    Diagnostic reports
       2014-11-13 QuickLookSatellite crash x2
       2014-11-21 com.apple.WebKit.Plugin.64 crash
    Log
       Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
       Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
       Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
       Dec  1 09:09:03 [[0xffffff802bfa4000]  OpCode 0x0C01 (Set Event Mask) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
       Dec  1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
       Dec  1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
       Dec  1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
       Dec  1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
       Dec  1 10:31:08 ALF: ifnet_get_address_list_family error 12
       Dec  1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
       Dec  1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
       Dec  1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
       Dec  1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
       Dec  1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
       Dec  1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
       Dec  1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
       Dec  1 20:08:30 jnl: disk3s2: journal replay done.
       Dec  1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
       Dec  2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
       Dec  2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
       Dec  2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
    Swap (MiB): 41556
    Activity
       Net: 210 in, 20 out (KiB/s)
    Memory: kernel_task (UID 0) is using 1632 MB
    kexts
       com.cisco.kext.acsock (1.1.0)
       com.wdc.driver.USB.64.10.9 (1.0.1)
    Daemons
       com.cisco.anyconnect.vpnagentd
       com.oracle.java.JavaUpdateHelper
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.google.keystone.daemon
       com.wdc.WDSmartWareService
       com.oracle.java.Helper-Tool
       com.adobe.fpsaud
       com.wdc.SmartwareDriveService
    Agents
       com.adobe.AdobeCreativeCloud
       com.zimbra.desktop
       com.citrix.ServiceRecords
       com.google.keystone.system.agent
       com.apple.photostream-agent
       com.genieo.completer.download
       com.genieo.completer.update
       com.cisco.anyconnect.gui
       com.citrix.ReceiverHelper
       com.citrix.AuthManager_Mac
       com.citrix.FMDAgent.14800.UUID
       com.oracle.java.Java-Updater
       com.fiplab.MailTabProHelper
       com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
       com.citrixonline.GoToMeeting.G2MUpdate
       com.apple.AirPortBaseStationAgent
       com.microsoft.SyncServicesAgent
    Startup items
       /System/Library/StartupItems/ciscod/ciscod
       /System/Library/StartupItems/ciscod/StartupParameters.plist
    Bundles
       /System/Library/Extensions/hp_fax_io.kext
       - com.hp.kext.hp-fax-io
       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
       - com.hp.print.hpio.Inkjet1.kext
       /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
       - com.hp.print.hpio.Inkjet4.kext
       /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
       - com.hp.print.hpio.inkjet8.kext
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/WD1394_64_109HPDriver.kext
       - com.wdc.driver.1394.64.10.9
       /System/Library/Extensions/WDUSB_64_109HPDriver.kext
       - com.wdc.driver.USB.64.10.9
       /Library/Extensions/hp_io_printerclassdriver_enabler.kext
       - com.hp.hpio.hp-io-printerclassdriver-enabler
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
       - com.citrix.citrixicaclientplugIn
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
       - com.google.googletalkbrowserplugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/npg.plugin
       - npg.graphon.com
       /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
       - com.google.o1dbrowserplugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/Internet Plug-Ins/SlingPlayer.plugin
       - com.slingmedia.slingplayer.plugin.nspapi
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/FMDSysPrefPane.prefPane
       - Citrix.FMDSysPrefPane
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
       - com.westerndigital.quickview.prefpanel
       /Library/PreferencePanes/Zimbra.prefPane
       - com.zimbra.prefpanel
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Internet Plug-Ins/WebEx.plugin
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx64.plugin
       - com.cisco_webex.plugin.gpc64
    dylibs
       /usr/lib/libaudioc.dylib
       /usr/lib/libclipc.dylib
       /usr/lib/libcs.dylib
       /usr/lib/libdc.dylib
       /usr/lib/libfilec.dylib
       /usr/lib/libMonoPosixHelper.dylib
       /usr/lib/libpbr.dylib
       /usr/lib/libprintc.dylib
       /usr/lib/libsc.dylib
       /usr/lib/libSFFileMonitor.32.dylib
       /usr/lib/libSFIPC.32.dylib
       /usr/lib/libSFIPC.I.dylib
       /usr/lib/libSFsqlite3.7.4.dylib
       /usr/lib/libSFSyncEngine.I.dylib
       /usr/lib/libupc.dylib
    App extensions
       it.bloop.airmail.beta10.Airmail-Today-Beta
       it.bloop.airmail.beta10.Airmail-Composer-Beta
       com.wunderkinder.wunderlistdesktop.sharingextension
       com.wunderkinder.wunderlistdesktop.todayextension
       com.readitlater.PocketMac.AddToPocketShareExtension
       com.stylemac.instadesk.Photodesk-Feed
       it.bloop.airmail.beta10.Airmail-Share-Beta
    Apps
       /Applications/Uninstall IM Completer.app
    Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/opt/cisco/anyconnect/gui_keepalive</key>
        <true/>
        </dict>
        </dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.gui</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>open</string>
        <string>--wait-apps</string>
        <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
       ...and 8 more line(s)
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>9</integer>
        <key>Minute</key>
        <integer>57</integer>
        <key>Weekday</key>
        <integer>3</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
       http://www.apple.com/DTDs/PropertyList-1.0.dtd >
       <plist version="1.0">
       <dict>
            <key>Label</key>
            <string>com.cisco.anyconnect.vpnagentd</string>
            <key>ProgramArguments</key>
            <array>
                 <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
                 <string>-execv_instance</string>
            </array>
            <key>KeepAlive</key>
            <true/>
            <key>RunAtLoad</key>
            <true/>
            <key>AbandonProcessGroup</key>
            <true/>
            <key>EnableTransactions</key>
            <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.SmartwareDriveService</string>
        <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.WDSmartWareService</string>
       <!-- <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.download</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>download</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Downloads</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.update</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>update</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>StartInterval</key>
        <integer>86400</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.microsoft.SyncServicesAgent</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
               <key>Label</key>
               <string>com.zimbra.desktop</string>
               <key>ProgramArguments</key>
               <array>
                       <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                       <string>start</string>
                       <string>-w</string>
               </array>
       

  • Hi everyone. I have just started having problems with iCal.  Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

    Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

    Hmmmm.
    At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
    Click on the Finder icon in the dock
    Click on Go > Home
    Double-click Library
    Double-click Preferences
    Look for a file called "com.apple.ical.plist" and remove it to the trash.

  • I want to remove an add on becauase I've been having problems with FIrefox locking up since I installed. How the heck does one remove an add-on. I hate to be stupid but I cannot figure out how to uninstall an add on

    I've been having problems with Firefox 4.0 locking up pretty much since I installed it. I did add a few add-ons and all I can think of to do is to remove them. I can't figure out how to get rid of them.

    Well, When I click on Add-ons I don't get a list of add-ons. AN Add-ons tab opens which shows lots of other great add-ons but I can't get a list os ones that I've installed and have no option to remove. I'm on version 4.0. Maybe the "remove" as described is for an earlier version?
    Nevermind, figured it out. Had to click on "Extensions" on the left side of the page to get the list
    Thanks

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Maybe you are looking for

  • Having trouble  uploading the oam file to my Muse website.

    I keep getting error messages about uploading the Edge Animate files I made, such as: �Error: Error uploading file jquery-1.8.3.min.js. There was no response from the server. Check your network connection, and try again. If this problem persists, try

  • Constant HDD access (K8N Neo4 Platinum)

    Hello all, this is my first time posting on these forums. A couple of days ago I put together a new system for myself, with the following components: * Athlon64 3200+ processor * MSI K8N Neo4 Platinum motherboard * 1Gb RAM * Gigabyte 128Mb GeForce 66

  • Creative Cloud Installer does not complete installation

    Hey Folks, I've been trying to install Creative Cloud, but the install stops mid way through installing the Adobe Application Manager. The Adobe Application Manager folder appears in the Utilities Folder, but has nothing in it. I then get this messag

  • I purchased Lightroom 5 Student teacher edition in June 2013,

    I purchased Lightroom 5 Student teacher edition in June 2013, and installed it on my laptop and desktop computers. Recently my laptop crashed and I had to replace it. When I visit my account and try to re download it, it says it is not available to d

  • Mixer + Audio Interface Combination best for Logic?

    I have struggled for the last year with a totally unreliable and unfixable Mackie Onyx 1220 with built in sound card ( which is completely dodgy and keeps disconnecting itself from my Mac. It is definitely not a Logic issue). There was a thread about