Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.
Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated
The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.
Similar Messages
-
Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
SurendraI'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
SSLv3
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
TLSv1
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DHE-RSA-AES128-SHA Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-SHA Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(256) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
AES128-SHA Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
AES256-SHA Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(256) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas? -
But the way, im using ipad with ios 5.1.1
No I can't open that site with Safari, but with Puffin Web Browser on my iPad I can open that site!
http://itunes.apple.com/app/puffin-web-browser/id406239138?alreadyRedirected=1&m t=8 -
I updated my computer from Snow Leopard to Lion. The problem is none of my pictures go to my IPad or iPhone. When I checked my settings, I go into ICloud and photo Stream, and it tells me that I need to buy a update. Any help would be appreciated.
Then maybe you need to buy an update.
-
Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!Click here and follow the instructions.
(98888) -
Very often I get a contact error message when I try to us my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol..
See this support article - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links
-
Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
ThnxHello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP. -
Safari 8.0.3 Can't establish a secure connection to the server
I have a Macbook Air (early 2014) running OS X Yosemite 10.10.2
Safari is version 8.0.3
When accessing the websites "https://www.national-lottery.co.uk" and "https://portal.wmpfonline.com" I am given the below message:
Safari can't open the page "https://www.national-lottery.co.uk" because Safari can't establish a secure connection to the server "www.national-lottery.co.uk".
Initially when I bought my Macbook Air these sites worked perfectly. Also, when I clear website data it will work for a short period of time (roughly 2 minutes) but other times that makes no difference. I have tried using FireFox but I still have an issue accessing these sites. When in recovery mode both sites work perfectly fine without an issue.
Is anyone able to help me with this issue? I have been searching and searching for a week to find a solution to this problem.
Thank you all in advanceThis could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 3
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 4
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 5
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 6
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 7
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
Safari "can't establish a secure connection to the server insert website "
Per the title, Safari has started saying that it cannot establish a secure connection to the server. This occurs when I try to log in to any website.
I have reset Safari, I have turned my router off and on (I am using a WiFi connection).
I upgraded (today) to the newest software, Mountain Lion.
There is another Mac in the house (not on Mountain Lion) that works fine.
I downloaded FireFox and everything works fine.
I am using a Macbook Pro.
Fix, anyone?Hello CaptainSam88,
We would like to recommend you to download Rapport's updated version, as we suspect the problems you were experiencing have already been resolved.
You can download the latest version here:
http://download.trusteer.com/Gcur4Wtnu/leopard/Rapport.dmg
Please restart your browser after the installation completes and let us know if the problem persists.
If the problem persists, we would be very interested in fixing it.
Please note that we offer 24/7 free technical assistance.
Should you need additional assistance, feel free to contact us by submitting the following form: http://www.trusteer.com/support/submit-ticket
We also have helpful information available in our FAQ: http://www.trusteer.com/support/faq
Sincerely,
Ori Harel
Trusteer Technical Support -
I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2: "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated! Thanks in advance.
Hi c1r1g1,
If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
Safari 6 OS 10.8 Mountain Lion - can't establish a secure connection to the server
Hi everyone! I have difficulties with Safari 6 on OS 10.8 Mountain Lion... When i attempt to connect to various secure http sites, Safari will fail to connect, saying "safari can't open the page because safari can't establish a secure connection to the server" Other times, a small rectangle will appear within the address bar labelled https, and all will be well. It's quite random and irritating. To get it to word again, sometimes a relaunch does the trick, sometimes I have to reset safari. Is there something I can do?
Thanks!Hi everyone! I have difficulties with Safari 6 on OS 10.8 Mountain Lion... When i attempt to connect to various secure http sites, Safari will fail to connect, saying "safari can't open the page because safari can't establish a secure connection to the server" Other times, a small rectangle will appear within the address bar labelled https, and all will be well. It's quite random and irritating. To get it to word again, sometimes a relaunch does the trick, sometimes I have to reset safari. Is there something I can do?
Thanks! -
I just downloaded Firefox 6.0. The web page asked if I wanted to upgrade. What is the most recent version of Firefox and why can't I get it denoted in the propperties link? Also why is it not compatible with AVG Tool Bar?
Firefox 6.0 is the current version.
Get what denoted in what properties link.
You can get the version number in Help -> About Firefox,
and in '''about:support''' typed into the Location bar, and you can use JavaScript to list the user agent -- javascript:navigator.userAgent
I'm not aware of any version of Firefox from Fx 2 on up to Fx 6 where "AVG Safe" is not a problem. Crashes aren't the only failures caused.
* http://kb.mozillazine.org/Problematic_extensions
* https://addons.mozilla.org/en-US/firefox/blocked/
* https://addons.mozilla.org/en-US/firefox/blocked/i6
* https://bugzilla.mozilla.org/show_bug.cgi?id=527135 -
Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html -
Hi all,
I've been trying to update my Jailbroken iPhone 4 to ios6 but, unfortunately, I keep getting the "could not establish a secure connection to the device" when connecting it to iTunes. I've tried updating "over the air" but this flags up an error too. Finally, I can't restore to a previous backup because, the backups I previously had, were stored on my old (broken) computer.
CAn anyone help? Any suggestions would be greatly appreciated!
Thanks,
Rakesh.You jailbroke your phone.
Only google may help now.
You'll find no help here.
If Haiku you don't like,
Then to Google you should hike,
You jailbroke your phone,
Now on these forums you are alone,
'Tis a day of no cheer,
For we cannot help here.
In non-poem; You jailbroke your phone, which is not support by Apple, meaning updates will not work on it as they would if you were running official software.
As per the ToC for the device, and for these Discussion Boards (both you agreed too), you will not get support either from the discussion board, or from Apple directly.
Your best bet is to Google for help and learn a valuable lesson; Jailbreaking can definitely brick your phone. -
On items listed on ebay, you can click on a picture to enlarge it. With IE I can save the picture to my computer. Firefox only allows me to save the web page. What can I do to save pictures - .jpg or .bmp?
The same problem happens if the seller includes pictures in the text description.Now I cannot create a screenshot because the massage doesn't appear anymore.
I was told that this is not my problem only. Is it the recent update that broke somethng? I've all the accounts configured correctly, MT just doesn't send or download messages.
I tried to remove one of my accounts to re-set it, but when I tried to configure it once again Mozilla rejects it claiming the password is wrong. I triple checked, it's correct.
Maybe you are looking for
-
Hi, My E61 cant play video with resolution 640×480 which is recorded with Nokia 6280. Also it cant play the streaming video from internet, like BBC and liputan6 (indonesian tv) Anybody can help? Thank you in advance ZaMessage Edited by ajak on 08-Feb
-
Slow internet on mid 2011 macbook air
So my internet is intermittently slow on my macbook air. This has been happening for many months although I cannot remember if it corresponded with upgrading to OS X 10.9. It is sporadic and I cannot identify any precipitating causes or solutions. My
-
Custom Page Size Printing Error Since Updating to Mavericks
Can anyone help me please... iMac 10.9.4, with Adobe CS4 suite and Adobe CC Suite installed. I have recently updated to Mavericks and since the update my custom page sizes no longer print at 100%, custom sizes all get scaled down (i presume to fit sh
-
I installed Flash Builder Premium 4.7. The installation was successful but when I am running flash builder, it is giving me a startup error and some of the contents of log file is given below. Can anyone help me resolve this issue? Thanks! !SESSION 2
-
How to set container type in PHP
Hello, I wanna to set the type of container to be XmlContainer::WholedocContainer. However it did not work, the php warnning "Fatal error: Undefined class constant 'WholedocContainer'". The book named The Definitive Guide to Berkeley DB XML told that