Having a problem with HP Solution Center seeing my hp6940 printer

So here's the environment, windows XP, ip address 192.168.50.2, hp 6940 at 10.9.26.100. These two networks are connected by a router. I can ping the printer, I can browse to the printer address and see the printer web pages. If I bring up HP Solution Center, version 60.0.114.000, it reports when accessing the status "hp deskjet Disconnected!" and if I check ink levels the HP 6940 Toolbox reports "The computer is unable to establish two-way communication with the device" Windows XP can print to the printer. What mechanisms are being used by the Solution Center to try to communicate with the printer?

Hello w74me ,
Welcome to the HP Forums.
I see that you are having an issue with the Solution Center.
Try running the HP Print and Scan Doctor.
If the Doctor fails, please let me know where it failed and error codes you may see.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Problems with HP Solution Center Display

I am using Windows 7 and IE. I have most recent Flash Player. Solution Center no longer displays. I have tried suggestions on website. Can't find Control Panel for Flash Player. Does anyone have a resolution for the display problem? Also Weather Channel no longer displays.

Hello there! Welcome to the forums @dstef1605 ,
I have some suggestions in mind for the issue you're having with installing your printer on Windows 7. However, I would first need to know which printer you have.
Please let me know the printer model and we will troubleshoot from there!
Also, if you have an all in one, make sure you can make copies from the printer and include the results in your reply.
How Do I Find My Model Number?
Happy Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with Lenovo Solution Center for Windows 8.1

Hi,
I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
(I installed it with the necessary administrator priviledges.)
But it didn't work.
I am getting the following error message.
Can anyone help me with this problem. Thanks in advance.
Best regards,
Jens.

This one?
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
Cheers.
If I helped you, please give me some kudos! ^^

Problem with Lenevo Solution Center message clearance

Hi,
My Lenovo solution center is howing me a message regarding one message in red bar for software updates and even after it gets updates it still the same and cannot remove that messae.
When i am trying to update it it opens a new window such like windows update and sows it is up to date.
Can anyone please advice me how to remove this message from the application.

It will launch the message, unless you have Windows update set to automatic.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Hi, I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

Hi,
I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

What program are you using for this editing?
We can ask a Host should move your query over to that forum.

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
Why don't ou update the appletv software?

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless i talk right next to the mic. how can i fix this

im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless I talk right next to the mic but it sounds low . how can i fix this

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Having connection problems with Mail after installing 10.9.4

I upgraded to 10.9.4 a few days ago, and ever since, I've been having connection problems with Mail. First, it stops downloading new mail automatically and second, it won't send any of my messages. When I try to send, I get a message that it is unable to connect.
Quitting Mail and restarting it seems to clear the problem, but then it happens again, maybe an hour or two later.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Friend Recommendations: we're having trouble communicating with the game center server and are unable to turn on friend recommendations. Does anyone know how to fix this?

Friend Recommendations: we’re having trouble communicating with the game center server and are unable to turn on friend recommendations on our iPad. Does anyone know how to fix this?
we also get this error message when we try to connect the iPad to Facebook from the Candy Crush Saga game..... Failed: Sorry, you don’t have access to the Kingdom, right now. Please try connecting again later. anyone know how to fix this?

Welcome to AD!
I have a regular post for the top 3 or 4 fixes for that 9808 error. Obviously you are going to skip #1, since you've already tried it. Let me know how you get on with the next 2.
The top 3 fixes to itunes error 9808 seem to be
1) Go to Start > Control Panel > Internet Options > Advanced, make sure that SSL 3.0 is checked and TLS 1.0 is checked. Also under Security make sure that the “Check for server certificate revocation (requires restart)” is unchecked. Then click ok and fire up iTunes.
2) The culprit was Norton. The users are set up as Admin and Standard. I have Parental Controls turned on in both Vista as well as Norton. Admin users had no problems connecting to iTunes. Standard users would get the error. I had to go to Norton’s Personal Firewall and add the program “iTunes Helper.exe” and set the option to “Allowed” (”iTunes.exe should already be in the Allowed category.) in order for the standard users to be able to connect.
3) close iTunes if you have it open right now. Then go to C:/Documents and Settings/username/Local Settings/Application Data/Apple Computer/iTunes. Delete or cut the preferences.xml file which contains your iTunes preferences. Then go to C:/Documents and Settings/username/Application Data/Apple Computer/iTunes and delete or move the preferences.xml file. For Mac users, there is only one file you must delete or move a to a new location and is located at User > Library > Preferences > com.apple.itunes.plist. Restart iTunes and it will recreate those two (or one) files with the default settings. Feel free to set your preferences back to what they were and then connect to the iTunes store and enjoy!
And #4, see if you can get into the iTS from a different windows admin account on the same PC.

Having a problem with eBooks in my iTunes library.

As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?

Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy

I have an iMac and iphoto. Currently I am having a problem with an album in iphoto. When I double click on the album all I get in the main body of the screen is a triangle with an exclamation mark and my 2 photos show at the very bottom of the window.

I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W.

Having a problem with HP Solution Center seeing my hp6940 printer

Similar Messages

Maybe you are looking for