Having a problem with the curser on MacBook Pro in Mavericks. Erratic activation and control.

I have little or no control of the curser. It cuts in and out without any command or direction from the pad or trackpad.

i meant the bar from where i can go to file , options, edit. it depends on the program am using for example for itune
Follow these steps to burn a high-quality audio CD using iTunes:
From the Edit menu (Windows) or the iTunes menu (Mac OS X), choose Preferences.
i cannot find the edit menu in the top of my program

Similar Messages

  • I have just changed my iCloud account and am now having serious problems with Calendar on my Macbook Pro. Any ideas?

    I decided to start using iCloud etc but discovered that my Apple ID doesn't actually exist (I was literally told this over the phone my an Apple Support worker) which is weird, as my email address for this Apple ID still exists. This is the first time I'd had any problems of this sort as I'd never had to use my Apple ID before. So anyway, I signed out of iCloud (i.e. signed out of my non-existant account) and signed in with my other, working, iCloud account which I've had absolutely no problems with whatsoever. All well and good.
    Before signing out of/deleting my old iCloud account I moved all my events in Calendar from "iCloud" to "On My Mac" so that I wouldn't lose the information when switching to my new account. No problems with this. However now that I am signed in on my new account, every time I open Calendar I receive the following two error messages:
    "Couldn't move your calendars to iCloud because an error occurred.
    Make sure you're connected to the Internet, and then try again."
    "The server responded with an error.
    Access to account "iCloud" is not permitted.
    The server responded:
    "403"
    to operation
    CalDAVMigrateToServerQueueableOperation."
    Note that with regards to the first one I am definitely connected to the internet. I have tried restarting my Macbook, have tried enabling/disabling Calendar in iCloud, nothing has worked. I always get these error messages. I have two options, "Try Again Now" or "Try Again Later", for the first message and "Try Again" or "OK" for the second. Pressing anything just results in the error messages just coming up again in a cyclic manner, after briefly trying to "Move calendars to server account". Sometimes a pop up also appears where it says "Upgrading calendars" with a progress bar but this freezes/never goes anywhere, and regardless of the outcome, I cannot access my information in Calendar. Note that behind these error messages etc I can see my events in Calendar but I cannot access the detailed information contained within them nor can I add any new information or essentially do anything in Calender. Sometimes Calendar crashes and I get a crash report.
    Sorry for this dense block of information but I have no idea what's going on so I'm just trying to give a clear account of the problems I'm facing. I really hope someone will be able to help me with this and I thank you in advance.
    Sam

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • I am having a problem with Bootcamp on my Macbook Pro (early 2011).

    I know how to install windows using bootcamp etc. etc. The problem is that I have successfully installed and have been using windows on my mac...until today
    I tried starting up in windows as usual and all of a sudden, it loaded up much slower than usual, then when to a black screen where my mouse cursor appeared for a brief second before the entire screen when black. I can hear the start up sound as well as my computer still running but nothing on the screen appears and remains black
    I've tried googling for this answer to this problem but have only come up with this problem being for imacs and bootcamp 5 (i'm assuming my current 2011 laptop runs bootcamp 3.2?) Does anyone know how to fix this problem? I'm just confused as to why this happened since it was working just fine yesterday? ( i didn't install anything new...unless the problem resides in one of the window updates??

    EDIT: The only thing new that was installed was downloading "Bootcamp 3.3 patch"
    Could this be the cause of the problem? If so, how should I go about fixing it?
    Thanks for your time!

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

    I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
    This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
    [email address removed to protect your privacy and security]
    <! [email protected] -->

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Hi,  I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

    Hi,
    I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

    What program are you using for this editing?
    We can ask a Host should move your query over to that forum.

  • Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

    Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
    Thanks!
    Angela

    You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
    I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
    Best of luck.

  • Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

    Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

    Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4))    I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

  • I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

    Is there a DropBox icon up in the menubar you can click on & see quit DropBox?
    https://www.dropbox.com/help/41

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • TS1702 I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

Maybe you are looking for

  • CPU time of BPM or message mapping?

    Hi all, is there a way to find out how much CPU time is spent by a certain BPM instance (or message mapping instance)? It would be sufficient to get that value per BPM type / message mapping type. So far, I've found the following sources, which all w

  • Mac Mini Server - Xeon Ivy Bridge

    Good morning. I was wondering... is it feasible to equip the next Mini Server with an Ivy Bridge Xeon processor? It could be one of these: http://ark.intel.com/compare/65733,65729,65726,65728 Pros (including other ideas): - Capabilities to stack Mini

  • Problem after downloading OS 6

    I am having a white screen in my iphone 3gs after downloading OS 6 what to do ?? i reseted and restarted my phone wat should i do ???

  • Best Printer For Graphic Design

    We are looking to start printing and selling some of our graphic design works as prints similar to this - http://www.notonthehighstreet.com/placeinprint/product/brixton-academy-blueprint-art-print What is the best printer to use - inkjet or laser Any

  • JTextPane  create hyperlinks

    in my project, strings are entered in separate field n get displayed in JTextPane i want d strings get processed n to b checked if they r links like http://..... or www. ... if so they 've to b converted to hyperlinks. how do i achieve this..