Having issue with variable after upgrade in bi7.0

Hi,
I have issue with variable
For example Plant info object has attributes country, company code, storage location
etc.
When I run the report. If I click on plant variable it is showing me the all the data for all country , compony code , storage location. I donot want this.
I just want only plant input values on variable screen
Thanks,
Naman Shah

Naman,
What is your SP level ?
Also the characteristics mentioned - are they compounding attributes ? if yes then tey will come in your variable entry.

Similar Messages

Having issues with WiFi after upgrading to iOS 7.

After upgrading my iPhone 5 to iOS 7 I'm having WiFi issues that I didn't have with iOS 6. For example, on my home network YouTube videos hang multiple times in a 1 minute video, Facebook pages with heavy duty graphics take forever or don't load, and running Ookla speed test, all the test are slower. On every other computers in the house, download is faster than upload, except on the iPhone 5 with iOS 7. Anyone else seen this?

Do the basics first. follow http://support.apple.com/kb/TS1398. I would also clear cookies and data in settings > safari.

Is anyone having issues with sound after upgrading RAM?

I recently bought a 2009 Mac Mini with 1GB of RAM. Everything was working fine so I decided to upgrade the RAM to make running more apps a little smoother.
I took it to KRCS (an Apple Premium Reseller) and they put in another 1GB stick. I took the MM home and booted it up but no chime. I loaded iTunes and songs wouldn't play. I couldn't even turn the volume up or down.
After taking it back to KRCS they verified all the connections were ok and everything was seated correctly, however the sound still wont work. They ran some hardware diagnostics and they said that it is showing that there is a sound devicde present but it isn't showing any input or output devices once booted in to OS X.
Has anyone else had this problem? Does anyone have any suggestions as to what could be causing this? Could it be a firmware issue do you think?
Cheers,
James

Morning peeps
As mentioned I booked my Mac Mini in with an Apple Genius to see if they could shed any light on the problem. So I saw a very helpful guy called James (go figure 8-)) who looked first of all looked to see if there were any reported problems by Apple. He also had a look around the net to see if there were any suggestions but unfortunately this all proved to be fruitless. He then tried booting from a clean drive to see if it was a software issue but this again failed, leaving him a little stumped.
Finally after a few minutes of looking at verious hardware information he decided to look at the RAM as the Mac was reporting the new 1GB stick I had installed was from a different manufacturer. Again no luck and at this point I knew what was comming...
"It doesn't look like I will be able to fix the problem today."
After all his efforts he couldn't seem to solve the issue so the next stange involves replacing some of the hardware. He showed me that he had gone ahead and ordered a new sound board, the ribbin that connects it to the main board and something else which escapes me at the moment, all of which is covered under the waranty.
So after all that the issue still remains. My Mac Mini is at the Apple Store at the moment and is awaiting the new parts to be installed. James was confident that it could be fixed with these new parts, however he did say that if it couldn't be fixed then Apple would replace it with a new one. He also mentioned that they would try and get the RAM upgrade working once the new hardware was fitted, but if that is unsuccessful he is going to give me the RAM back to get a refund at KRCS.
I think I have covered everything there - sorry if I started to ramble a bit
If you need any more information then I would be more than happy to help.
Cheers,
James

Am I the only one (still...) having issues with Bluetooth after upgrading to iOS 8.1...?

Hi fellas,
I guess my expectation level was way too high regarding this upgrade from iOS 8.0.2 to 8.1: my iPhone 6 still can't connect to Bluetooth peripherals, whatever they may be...
I have a MacBook Pro running Snow Leopard, and a PC with Windows 8.1 update on it, and none of them can pair with the iPhone, no matter how hard I try.
Have you guys found workaround measures or (hopefully) solutions?
I swore today was my last day going to work with the crappy Apple-issue headphones that came with the phone, and I'd pack my faithful Sony Ericsson BT to work tomorrow...

Your english is very good! For Handoff/Continuity to work you need Bluetooth turned on on both devices and they need to be in range of each other -- but you do NOT go to the Bluetooth setting on either device and pair them. I know that is unusual and can think of no other case where that is done using Bluetooth, but that is how it works for Handoff & Continuity.
The following are the other things needed from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
How to get started:
Sign in to the same iCloud account on all your devices.
Turn on Bluetooth on all the devices you want to use. Make sure your devices are near each other.
Connect all your devices to the same Wi-Fi network.
Turn off Handoff
To turn off Handoff on your iPhone, iPad, or iPod touch, go to Settings > General > Handoff & Suggested Apps, and turn off the setting.
On your Mac, go to System Preferences > General and deselect the option to allow Handoff.
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.

Is anyone else having issues with airplay after the Lion update?

Is anyone else having issues with airplay after the Lion update? It sees the libaray but won't connect...

I'm having the same issue. So far all lion has done for me is make all my microsoft office documents un-readable until I upgrade (about $150) and lose my home share capabilities...can anyone assist with this?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

If you are facing issues with AutoVue after upgrading Java

Oracle periodically releases security updates (CPU see Oracle Critical Patch Update - July 2014 for latest) for all its software, Java is no exception to it.
At every CPU, the AutoVue team monitors the impact and documents the steps required to have AutoVue working properly with your integrations
For your reference, we attach the latest KM note here. It is a highly recommended reading for customers using AutoVue Client/Server Deployment.
KM Note 1615032.1 - AutoVue Client Usage with Java 7u51
(https://support.oracle.com/epmos/faces/DocumentDisplay?id=1615032.1)
Feel free to post any questions through this Community thread.

Now, do you have to disconnect your printer everytime that you want to use it? If so, this is just a temporary fix and that's not something that you should have to do with regularity.
It's GLARING, the amount of people who are having issues with this software. Is APPLE listening to its customers? I'm to the point where I'm about to NOT recommend an I-Pod to anyone that asks. If they do, that's what I'm recommending. I'll also steer them to this website so that they can see with their own eyes, the problems that everyone is having.
This is totally ridiculous. I've been trying for THREE weeks to get my POS I-Pod Shuffle to download songs through I-Tunes 7.0. It's clear to me that these designers of this software haven't got a clue.
Sorry for the rant but I've had it with this junk.

I'm having problems with Notes after upgrade to OS4. Anyone else?

After upgrading mu iphone 3GS to the new OS4, I'm having serious problems with my Notes. If I edit old notes and klick Done, it now takes longer then ever to save. And when the save is finished, my latest edits are gone! The note is back to the text before I opened it up for editing...
Has enyone experienced this after upgrading?
Also, why does it take such a long time so save the notes now? I can see in the "progress bar" the phone is connecting to the Internet after klicking Done. Why is that? It never did that before. Does the new OS4 save all notes on some sort of server instead of just saving on my phone? Can I shut this function off somehow?
Thanx for all answeres!

I am having the same issue but havent been able to find a solution yet.

Issue with amavisd after upgrade to 2.6.4 folowing topicdesk tutorial

Running into various issues with my mail server after applying Security Update 2009-005 to my MacOS X Server 10.4.11, I have upgraded Amavisd, SpamAssassin and ClamAV to the most recent versions respectively 2.6.4, 3.2.5 and 0.95.2 using the topicdesk tutorials as in the past.
Amavisd now refuses to start issuing a
setrgid() not implemented at /usr/bin/amavisd line 13421
I have reinstalled everything several times in case I would have made a mistake but no luck.
Falling back to the previous version of amavisd (2.6.3) does not fix the problem.
Has someone an idea on where to look.
A thread in 2008 speaks about the same massage but I have been able to figure out how the problem was fixed.
Urgent help welcome.

Thanks for your reply. Neither amavisd.log not system.log gives any clue on where the problem comes from. I was trying to use debug to get an idea on where the problem comes from but it seems not to work as before though.
I am definitely not a UNIX specialist. How do you run amavisd in debug mode than if you can't no longer run it from the command line with debug.
Regarding the installation process, I have followed the tutorial line by line and did it 5 times just to be sure.
I nevertheless experienced several issues that I fixed :
1. force install Convert::UUlib failed. I had to run the install out of CPAN.
2. running /usr/local/bin/spamassassin -V fails with command not found but succeed when run as /usr/bin/spamassassin -V
3. sudo su clamav "spamassassin --lint" generating 2 warnings due to ok_locales and ok_languages in /etc/mail/spamassassin/local.cf even after running spamtrainer -f, fixed by commenting out the two lines.
To ensure that I did not do a typo, I have copied an unmodified version of amavisd.conf tp /etc/amavisd.conf. Same issue. Amavisd won't start.
Is there a way to get what executing amavisd debug from the terminal was doing ?
Will run a clean install on a different server that runs the same os level but was never upgraded using topicdesk tutorials and see what happens.

Issue with VPN after upgrading to 10.9.1

Hi.
Complete newbie so please go easy on me...
I set up a new VPN connection, via the Network Preferences dialog, to connect to my company's network - Interface set to "VPN" and VPN Type set to "Cisco IPSec". This was working fine - connected without issue - until I recently upgraded to 10.9.1! Now when I try to connect, I get the "Connecting..." message but it fails to connect.
Is this a known issue or is there something I can do to fix it?
Many thanks in advance.
Regards.
Paul.

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Issues with ApexLib after upgrading to Apex4

After upgrading our application to Apex 4 we have run into some issues that look to be related to ApexLib. We had issues with popup LOV’s and some tabular forms, after upgrading to ApexLib 2.1.2 the popup LOV's seem to be resolved. But we still have some problems when trying to update a tabular form that uses ApexLib validation. When trying to update we get an error that 'field' is needed, but the 'field' has been selected from a select LOV.
The error shows "Row 1: Health ED is required."
The code is:
select
"PERSON_WP_HLTH_ID",
"PERSON_WP_HLTH_ID" PERSON_WP_HLTH_ID_DISPLAY,
"PERSON_ID",
"PERSON_WP_HLTH_ED_CODE",
"PERSON_WP_HLTH_OTHER"
from "#OWNER#"."PERSON_WP_HLTH"
where person_id = :p58_person_id
I get this in debug mode.
...Process "ApexLib-Before Computation/Validation": PLSQL (ON_SUBMIT_BEFORE_COMPUTATION) BEGIN ApexLib_Item.setBoolDefault; ApexLib_Item.trimItems; ApexLib_TabForm.trimColumns; ApexLib_Lov.clearLovNullValues; ApexLib_Item.validateItems; ApexLib_TabForm.validateColumns; -- ApexLib_Error.showErrorStack; END;
I'm not convinced this is ApexLib related, but not sure what else might be the issue. Any thoughts or comments welcome.
Cheers,
JB
Edited by: Forward IT Thinking on Sep 10, 2010 12:01 AM

Peter,
I'm fairly new to APEX, would love to put a copy up on apex.oracle.com but not sure on the process. I have an account there, but don't have a packaged application yet so how to do that. If it's a simple process and you can point me to the process that would be appreciated.
In the mean time, I would have no problem setting up a developer and user account account temporarily for you to take a look. You can email me at [email protected] and I'll get you the info.
Thanks for you prompt response.
Regards,
John Bewley
Edited by: Forward IT Thinking on Sep 10, 2010 4:02 PM

Is anyone having problems with keynote after upgrading to Lion?

After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

Anyone having problems with Safari after upgrading to Yosemite?

Safari takes over 2 minutes to open after upgrading to Yosemite and once open it is not responsive. What is wrong? I have redone the download and it still has the problem.

I found this workaround and it worked for me.
"According to Hontz, the issue seems to be affecting only iPhone 4S users. Hontz has provided the following workaround to fix the issue:
1) Open the Phone and dial *228. This is a Verizon over-the-air programming number. 2) When the system answer press 1 for “Program or activate your phone” 3) Wait for the call to disconnect. You should get a prompt stating something like, “Settings updated.” 4) Open the Task Manager (double click the home button) and kill the Phone, Message, and Contacts Applications 5) Wait a few minutes (I waited 3 just to be extra safe) 6) Open the Message App to verify the fix.
If you are still broken, kill the Message App again, then reboot your phone.
Did iOS 5.0.1 also mess up your iPhone Contacts? Let us know if the workaround helped."
via: TSF

Permissions issue with Entourage after upgrading to Leopard

I upgraded my system to Leopard and in doing so, did a "clean" install. I copied my backup Database file to the Identity folder and now i get "you do not have sufficient permissions to view contents of this folder" when trying to launch. If i let Entourage create a new database file, it works fine....

Maciej Samsel wrote:
GIMP 2.2 crashes on start and the details explain some versioning problem of X11 native libraries. It might be issue on GIMP side that expects differen binaries to be installed (and perhaps removed by Apple due to compatibility issue). I just wanted to point this to be expected.
GIMP 2.4 for Mac OS X is not official release yet. It is only realease candidate and it should come soon hopefully with X11 issue being resolved in Leopard.
I believe that there are some known issues with X11 and BSD "under the hood" with Leopard. Fink is also broken and my old Darwin X11 attempts to run but nothing happens.

Issue with fs10n after upgrade

Hi ,
After upgrading from 4.6c to ECC6.0 we have a problem .
Go to:
FS10N->Enter value for: G/L account, Company Code, and Fiscal year
-->Execute --> Double click in the Balance Column --> Displays all the
items that related that balance --> there is no column called Material
so i want material column to print on the screen.
Thanks

I dont find material column in 4.6c as well, pls confirm whether u have this column in old system.
Regards
TGB

Having issue with variable after upgrade in bi7.0

Similar Messages

Maybe you are looking for