Having problem with typing chinese in OS X Lion

After installing OS X Lion, I am having problem with typing traditional chinese in my own account. Everytime I switch to traditional chinese the computer become extremely slow and the finally freezed. However, when I am using visitor account, I can type in traditional chinese without any problem. How should I fix this?

Normally differences like that between main and visitor accounts indicate a bad .plist in Home/Library/Preferences in the main account. I don't know which one might cause this...

Similar Messages

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Having problem with Traditional Chinese Zhuyin input after Mac OS X v10.7 Lion

Hello everyone
I just upgraded my macbook pro to Mac OSX v10.7 Lion
and I start to have trouble with Traditional Chinese Zhuyin input when selecting & typing, then the beachball started to spinning.. I couldn't do anything else to stop it. I then had to restart again and tried a several times then the problem is still the same
Is there any way to fix the problem?
Thanks

Try setting up a new user account and see if the same problem occurs when you are logged into that.
You might want to also ask in the Chinese Mac group:
http://groups.google.com/group/chinesemac/

Problem with typing chinese

Try to type Chinese but the system will crash and jump back to the home screen if certain characters were typed in, there were quite a few really common characters so it is seriously annoying. Does anyone know what was wrong?

Normally differences like that between main and visitor accounts indicate a bad .plist in Home/Library/Preferences in the main account. I don't know which one might cause this...

Having Problem with typing punctuation on E90 Keyp...

Hi I have a Nokia E90, and I cant seem to type a comma or period without pressing the shft button. i also cant seem to type the @ symbol. Is this normal .Help please!

It is not normal. You ahve a problem. Have you tried to reset the phone ? Maybe you have a different kaymap installed.
@ is next to Backspace, on its left.
Check the pictures on the Internet for keyboard layout on E90 and see if your keyboard is the same. Maybe you have a regional version....
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Anyone having problems with virus barrier 6 and Mountain Lion?

Since I upgraded to mountain Lion when I try to open Virus Barrier 6 is reports that the Daemon is not running> Is anyone else having this problem? HAs anyone solved it?

Check your version against this from Intego
http://support.intego.com/entries/21685591-intego-products-and-mac-os-x-10-8-mou ntain-lion

Having problems with your epson print after installing Lion?

Go hear for download.
http://support.apple.com/downloads/#epson%202.8
My Macpro wouldnt do a auto software update for some reason.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

Having problems with key chain password

I just got my mac book yesterday, and I'm having problems with my keychain password.
My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
Is there a way that i can reset it?

There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
Good Luck.
Adam

I am having problems with connecting to my router wireles...

I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?

Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating no with out name pls what is the solution

HI pls i am having problem with my iphone4s since i updated to 8.2 i can't check balance of my account and secondly if somebody call me it is indicating number with out name pls what is the solution

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

HT1657 I am having problems with sound in my rental movies

We rent movies all the time but lately we are having problems with sound for our movie rentals. We watch the first half hour without a problem than the voice is choppy all the time. Sometimes it is good for five minutes than noting for a while. We have tried everything we could think of with no avail. I could see one movie but the last 5 or so have been the same. Done trying we need to fix this! Help! Any ideas?

First try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If you still have the same issue, it's possible that something is lodged in the earphone jack. This can cause the iPad to think earphones are plugged in when they are not. Use a vacuum to try to suck any dust, lint or other foreign matter from the jack. If that still doesn't work, try CAREULLY using a toothpick.

Having problem with typing chinese in OS X Lion

Similar Messages

Maybe you are looking for