Having problems opening up a raw file in photoshop elements 11

unable to open a raw file in ps elements 11

The EOS 70D was first supported in Camera Raw 8.2 which is only compatible with Elements 12.
You won't be able to open Raw files from the 70D in Elements 11.
Options:
Upgrade to Elements 12
Free: download the free Adobe DNG converter, convert all 70D Raw files to DNGs then open and edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

Similar Messages

  • Cannot open Sony A900 raw files in Photoshop Elements 10

    new installation of elements 10, replacing elements 8.  Unable to open raw files (sony alpha 900)  adobe camera raw is not listed in the plug in menu, automatic updates is up to date, attempts to download camera raw 6.4 result in a message saying the update is not applicable to the application.
    Message title was edited by: Brett N

    Before going through the document it would be helpful to select the Help > Look for updates option. Some users reported it fixed the Camera Raw 6.6 problem automatically.
    If you are facing trouble opening your clicked images in Elements, there is an elaborate document which covers a number of errors, problems, and lists solutions for the same. The document can be found at: http://helpx.adobe.com/x-productkb/multi/troubleshoot-camera-raw-photoshop-photoshop.html

  • Cannot Open Nikon D90 Raw files in Photoshop Elements 7

    Does anyone have advice on how to get Photoshop Elements 7 to read Nikon D90 Camera Raw (.NEF) images? When I try to open one of these Raw images, I get an error message saying that the program does not recognize that file type.

    The D90 was supported as early as ACR 5.1 so you should download the PSE-specific version of ACR 5.6 from http://www.adobe.com/downloads/updates/ via the drop-down list at the top, and following the PSE-specific link and instructions.

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • How do I open my raw files in photoshop elements 12 editor-..my files convert to jpegs

    How do I open my raw files in photoshop elements 12 editor.  I have a MacBook. I use the iPhoto and move the files I want to work on into elements, but it converts the raw files into jpeg files.
    Thanks for your help!!!

    Are you opening the image directly from iPhoto? Right click & choose Edit in >> Photoshop Elements Editor
    This link is old but gives information on set up. It relates to PSE11 but the principle is the same. In iPhoto prefs you navigate to the editor application in the support files folder. Start from Finder by holding down the Alt (Optn key) and choosing Library.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

  • I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

    I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

    Here is the ACR 6.7 Windows installer for Elements 10:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383

  • Problems opening up 2011 raw files in current Photoshop.

    I'm having problems opening up some of my older RAW files in Photoshop CS6 and CC. It extends to both dng and cr2 files. They display as a monotone image, with no original color present. I can copy the files to another computer with CS5 and open them up there and they're fine, and I can resave them and they're OK. But this could be a looming problem. What's going on?

    Ha! It's a camera profile thing, I have a profile for my IR converted 5D, and for some reason some of my files had that profile applied. If I opened it in a computer without that profile on it, it opened up fine. Thanks.

  • Can I open raw files using photoshop elements

    Can I open raw files using photoshop elements

    Yes, depending on the Camera Model and version of PSE.
    All camera makers like to make slight changes to the RAW format for their new models. Adobe then take a few months to produce a camera RAW plug-in to process the new format.
    Give you PSE version and camera model and we could be more help.
    Brian

  • Unable to open Nikon 750 NEF files in Photoshop Elements 13

    I just got a Nikon D750 and I cannot open NEF files in Photoshop Elements 13 even when I download Camera Raw 9.0 and DNG Converter 9.0.  What can I do?

    This is a question for the Photoshop Elements forum. A moderator may find and move this tread for you.
    Benjamin

  • Having problems opening an SSIS solution file

    I have to make some changes to an SSIS package that was last modified in 2009 by a person who has left the company.
    I am having problems finding a version of Visual Studio that will open the SLN file. I do not know how the package was originally maintained.
    Yesterday, I was able to right-click on the SLN file and select 'version selector', that opened the solution in VS 2005 without me having to select a program. I made some changes and saved, rebuilt and ran the package.
    Today when I try to open the SLN the same way, it displays the screen with the various VS version icons on it, but no VS 2005 listed!
    The bottom line, is I now cannot open the solution with any version of Visual Studio. If I can find another SLN file that will open, can I copy the modified dtsx file to that solution so all my work is not wasted? It took me 3 days work to modify this package.
    Can someone please help, my deadline for this task is TODAY.
    Here is the message I get if opening with VS 2005:
    Here is the message I get if opening with VS 2010:
    Here is the SLN file (It looks like it got modified because I'm pretty sure yesterday it said VS 2005 at the top):
    Microsoft Visual Studio Solution File, Format Version 11.00
    # Visual Studio 2010
    Project("{D183A3D8-5FD8-494B-B014-37F57B35E655}") = "HPAddress_ExportData", "HPAddress_ExportData.dtproj", "{7EB5909F-6836-4B23-A121-9F623FB1C932}"
    EndProject
    Global
     GlobalSection(SolutionConfigurationPlatforms) = preSolution
      Development|Default = Development|Default
     EndGlobalSection
     GlobalSection(ProjectConfigurationPlatforms) = postSolution
      {7EB5909F-6836-4B23-A121-9F623FB1C932}.Development|Default.ActiveCfg = Development
      {7EB5909F-6836-4B23-A121-9F623FB1C932}.Development|Default.Build.0 = Development
     EndGlobalSection
     GlobalSection(SolutionProperties) = preSolution
      HideSolutionNode = FALSE
     EndGlobalSection
    EndGlobal

    Hi AllTheGoodNamesWereTaken,
    Based on my test, if we open a solution file with lower version in a higher version Visual Studio (VS), it will use Visual Studio Conversion Wizard to update the solution to current version of VS. Then the solution file will also change to current version
    of VS. If we open a solution file with higher version in a lower version Visual Studio (VS), it causes an error that “The version number in the package is not valid. The version number cannot be greater than current version number”. And the solution file still
    use the original version of VS.
    So it seems that the original version of solution file is lower than or equal to VS 2010. Since the VS is backwards compatible, we should use a higher version of VS (VS2010 and later) to open the solution file. Notice that we need open the solution file,
    not the project file.
    Besides, we can also create a new SSIS project in a higher version of VS, then add the packages with “Add existing package” option from File System. Reference:
    https://www.blackbaud.com/files/support/guides/infinitydevguide/Subsystems/bbdw-developer-help/content/tkaddpackagefromexisting.htm
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • CAN NOT OPEN  CANON EOS20D  RAW FILE IN PHOTOSHOP CS2

    I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?

    You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
    or
    C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
    Camera Raw 3.7 update for photoshop cs2 Windows
    Adobe - Photoshop : For Windows : Camera Raw 3.7 update
    other cs2 updates
    Adobe - Photoshop : For Windows
    Adobe - Bridge : For Windows
    Adobe - Creative Suite : For Windows

  • Cant open nef raw file in photoshop elements 9?

    i have photoshop elemets 9
    i have a nikon d5200
    and i have problems opening nef raw file. this is the message i get.
    i have tried all updating procedures.useless.i am upto date.i opened file as a raw nef file and i get this message:
    could not complete your request  because of a program error

    For the D5200 you have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Trying to Open Raw file in Photoshop Elements 4

    Does anybody have any ideas how I can open a RAW file from a cannon G10 camera in Photoshop elements 4.0?  The file is coming out of the camera as *.CR2.  I am working on a MAC with OS 10.5.7. 
    When I try to open a CR2 file in PE 4.0 it says it can not complete my request because photoshop elements does not recognize this file type.
    I have also tried to run the file through the dng converter version 5.3 and when I try to open it with PE 4.0 it gives the same message above.
    Any ideas of how to get this open and take advantage of the RAW format would be greatly appreciated, thank you in advance.

    There is no PSE 7 for mac. However, you may be able to find a version of the Adobe raw converter that will work in PSE 4 that will open your G10 files. I would start with the latest version (5.3) and keep working backwards till you find the latest version that will work in PSE 4. Camera raw updates for PSE mac are here:
    http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
    although the recent updates are listed for PSE 6 only, it's often possible with PSE to use updates that are supposedly too recent for your version of PSE, especially with PSE/Mac.

  • Unable to open RAW files in Photoshop elements 5.0

    I am using Windows XP, camera is Nikon D80. When I try to download NEF files I receive an error that reads files did not transfer. Reason given reads incompatible format. I just downloaded program today and not really sure what I have done wrong. Any help would be greatly appreciated. Thank-you.

    I have spoken to this gentleman again and I suspect his trouble has come from the copy of Elements 5 that he bought over the Internet. I think it was an incomplete copy. It doesn't seem to have included Bridge. Without the browser I doubt he would be able to see his RAW images.
    As it stands, when he double-clicks on a RAW image it opens in the RAW converter but he doesn't have the "Open with Bridge" option in the File menu. Consequently, he has no way to see thumbnails of his RAW images and he can't make wise decisions on which ones he wants to work on.
    I guess it goes without saying that if you get an especially great price on the Internet, something is wrong!
    Mary Lou

  • How to open Canon 6D Raw files in Photoshop 7.0? [was: CR2 Files]

    why  did my Photoshop 7.0 stop opening CR2 files

    Photoshop 7 is only compatible with Camera Raw 1.0.
    Camera Raw-compatible Adobe applications
    Why doesn’t my version of Photoshop or Lightroom support my camera?
    To open, Raw files from the Canon 6D you need Photoshop CS6, CC or CC 2014. Adobe no longer sells CS5 or earlier.
    Or, you can download the free Adobe DNG converter
    Photoshop Help | Digital Negative (DNG)
    Use that to convert all Raw 6D files to DNGs then try opening the DNGs in Photoshop 7.

Maybe you are looking for

  • How to handle Canceled documents

    Hi All, Need your suggestions. How can i handle the canceled documents.If document is created today and is loaded into BW system. After few days if user cancels the document , then what happens to the document which is already there in the BW system.

  • Link b/w cost center and activity of a WBS

    Hi,, Can anyone let me know how work center and activities of a WBS are linked? Please let me know ASAP... Regards, Balu

  • Satellite L300 - No "repair computer" option after pressing F8

    Hello all, I boot my Satellite L300, press F8 and it appears the "Advanced Boot Options" menu, but I don't see the "Repair Computer" menu entry, like stated in the manual... Please help. Thanks.

  • CO product..How to allocate the cost

    Hi, Anybody can guide me and thro' some light on how can i allocate the cost to a Co-Product from the main header materials. What is the use of the tab " JOINT PRODUCT " in costing view in the material master,in the same tab  we have something called

  • Can't print from Windows laptops

    Please help! I just bought the Time Capsule and I can't seem to get my Windows laptops to print. Each time I try I get a LPR error. Does anyone know how to resolve this issue?