Having problems with preview window.
I recently bought a Sony DSR-11 deck and actually captured on it earlier today but now it is doing something weird where it tells me that preview is disabled but it says VTR OK. Is there somewhere that I can enable Preview or do I need to reset the deck?
Quit FCP. Turn off the deck. Count to 5. Turn on the deck. Launch FCP, try again. If that doesn't do it, then restart.
Shane
"There's no need to fear, UNDERDOG is here!"
Similar Messages
-
Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple
Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support
What is your technical support question for these user to user technical support forums?
-
I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?
No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp
-
<pre><nowiki>[22:47:22.484] Unknown property 'box-sizing'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat
[22:47:22.486] Unknown property '-moz-border-radius'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:6
[22:47:22.486] Error in parsing value for 'top'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:8
[22:47:22.486] Error in parsing value for 'right'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:8
[22:47:22.486] Error in parsing value for 'filter'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:29
[22:47:22.486] Error in parsing value for 'background'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:50
[22:47:22.486] Unknown property 'zoom'. Declaration dropped. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:75
[22:47:22.486] Expected declaration but found '*'. Skipped to next declaration. @ http://www.insanee.com/update/wtf-2/cnn-doesnt-miss-a-beat:91
[22:47:22.592] Error in parsing value for 'cursor'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1
[22:47:22.592] Unknown property '-moz-border-radius'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1
[22:47:22.592] Unknown property 'box-sizing'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1
[22:47:22.593] Unknown property 'zoom'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1
[22:47:22.593] Unknown property '-moz-background-clip'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1
[22:47:22.594] Error in parsing value for 'filter'. Declaration dropped. @ http://i.po.st/static/css/r1post.css?3_2_1_pch_321:1</nowiki></pre>Hello niftynev,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Cheers, Patrick -
A few weeks after downloading Maverick, I noticed that some attempts to use software that opens new windows (like Blackboard) are now failing as soon as that window opens. Is this a glitch with Maverick?
Yes! Been living in a hellish nightmare since Sept-Oct. Unlike you, however, Apple has been of no help. They say the iPad is unhackable, plist and crash reports are none of my business and who understands them anyway, their route tracing apps are probably not reliable. The best they could do was wipe the iPad clean. Lost photos they said would be in the cloud....
Almost immediately was back in somebody's VPN, their remote controller, video, audio, working. Got the purple buddy for the first time today. I have been invaded, my iPad no longer feels like my own, I have lost thanksgiving, Christmas, new year trying to track down the invaders, signed up for a Cisco course, set/reset passwords.
I don't know who else to contact... Or what next to do.
I've read similar frustration in other posts, scattered around the support communities. Yours is the only one that has worked toward a solution.
How did you get anyone at apple to look at your logs and acknowledge there is a problem?
Would be happy for a suggestion on how to proceed. Already been the apple store genius and tech on phone route. -
Problem with preview PDF files on Windows 7 32bit
Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.I think I figured it out after reading other forums. Thanks!
-
I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac -
Are you having problems with Windows XP Pro and Airport Utility Updates?
I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.
Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot! -
Hello,
I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
Please heLp.
Thank you.Repair your Apple Sofyware update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install -
Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
Kind regards,
Faroek Abdoelrahman
The NetehrlandsEmpty the Safari cache more often.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari to test. -
I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?
You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Having problems with iTunes on Windows 7 64bit
I'm having problems with my iTunes with windows 7. I have done everything you possibly can from Apple support section and nothing seems to work.
Well my problem is that iTunes cannot connect to my iPad or iPhone. Both of these devices work fine with my fathers computers but somehow they don't work on my computer.
When I connect my iPad to my computer, unknown error will pop from iTunes. And it thinks my iPad is iPhone, wierd (or does iPad have iPhone operating system or something?). It does samething with my iPhone too, unknown error.
If anyone has had same problems that I do and somehow solved the problem, would you please assist me?Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
I can't remember which it was because I can't get any error messages anymore.
By the way, here is a list of what I have done already to make things work.
-uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
-updated all my drivers
-checked that windows can find my iPad and it does.
-Shut down my F-Secure firewall ect. and trying to connect iPad then.
-I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
-my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house. -
Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.
Hmmmm.
At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
Click on the Finder icon in the dock
Click on Go > Home
Double-click Library
Double-click Preferences
Look for a file called "com.apple.ical.plist" and remove it to the trash. -
Windows 8.1 having problems with pinter selection using Elements 13.
I am running Windows 8.1 with Elements 13 and am having problems with PRINT. If I select a printer from the PRINTER menu, Elements recognizes the change of selection, allows me to modify the printer's specific setting and, then, when I PRINT seems to not recognize the selected printer and print of whatever was set as the original printer. Then, I delete the "original" printer in Windows 8.1 and attempt to print again with the same general result except I receive a Printer Not Found error from Windows.
How do I modify the "original" printer setting (seems to be associated with the file)? Note the "original" printer is not the default printer.Hatstead,
Thank you.
Yes, all of the print drivers are up to date (re-verified last evening).
Yes, I can print and select the printer as normal for all of the standard applications I use (Visio, PowerPoint, Word, Excel, Outlook, direct print from file (Explorer)).
I shortened the printer names from the standard Microsoft convention (based on some of the BOG comments). There was no change. In fact after the test sequence noted in #5, I re-implemented the "name shortening" yet again (shorter yet). I launched Elements and ran into the same messages noted in #5 (obviously, the "stored" printer did not exist). Yet after I went through the printer selection process (again as in #5) and, after a lag time, Elements redirected the print job what was the "stored" printer which was renamed....I do not know how Elements associated the deleted "Stored" printer with its old name with the newly named printer since no other application could (I checked).
I have closed and restarted the PC numerous times.
I have deleted all of the printers except the one I wanted to use for the specific print job. In this case, Elements came back with a message it could not access the "stored" printer. I then selected the correct printer, Elements acted like it was allowing to set up the selected printer with the specifics of the print job, and, then when I went to print, Elements again tried to redirect the print job to the "stored" printer (even though it did not exist).
The target printer is a "local" printer (USB connected). The apparent "Stored" printer is a network printer. So, I deleted the PC which has the "Stored" printer from the network (actually not only deleted it from the devices on my PC but literally shut the PC down and disconnected it from the network (two different test)) to no avail (still got the test results in #5).
Yes, I have attempted to print from the Editor (my normal mode) and from Organizer.
I have copied, open a new file and, then, pasted the image I wanted to print to no avail.
Is the a "stored" printer associated with the file or with Elements? If so, how to I modify (or dis-associate)?
Again, thank you. -
Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.
The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.
Maybe you are looking for
-
Front end application error after import script run successfully in R12
Hi , i got an exception in R12 environment. i developed one simple OAF page and deployed in apps import script run successfully. but when i am opening that page in Front end it will give an exception. That is Exception Details. oracle.apps.fnd.framew
-
Photos not showing up when iweb site published
Once the website has been updated to iweb 08 the photos on pages do not show up. Has anyone found a solution to this?
-
STMS error hostname 'atltu1' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERRO
Hi, We are on SAP 4.6c and AIX unix . Our environment is a three system landscape where PRD have 4 dilaog instances My problem is - I cannot look at the import queue of the quality system when I logged on to the dialog instances. when I am on Central
-
Windows Explorer not showing all folders in mapped dfs drive
I have a strange problem, a users does not see all of the folders in a mapped dfs drive. The drive has over 2000 folders but in explorer it only shows 400. If I open a command prompt I can cd to the drive and dir lists all folders. the explorer behav
-
Re: Interfaces in Forte - has anyone used them?
We are making use of interfaces extensively and have never had the slightest problem. Interfaces do not cause any overhead, since they are mainly a means to support type checking by the compiler. At run-time the interface does not appear any more. Us