Having problems with USB cable, please HELP!

While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!

Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

I'm still having problems with XUL Runner - please help am getting desperate!

I recently sought help over a problem I am having with FF. When I try and load it, I get a message telling me that XUL runner 1.9.2.11 is not compatible with 1.9.2.12. The advice I received was to do a clean install. I have done this a number of times - using the Uninstall option in Control Panel as well as running the uninstall utility in the Firefox program folder. Each time I reinstall, and get the same problem. The only difference is that a few days ago I was installing FF 3.6.10, and that gave the error message that XUL runner 1.9.2.11 was not compatible with 1.9.2.10.
I have FF set as my default browser, so when I click on links in e-mails, etc. I get the same failure to load symptoms. However, I found by chance that FF works OK in conjunction with System Mechanic 10 - a maintenance utility I have on my machine. If I select the on-line help option from that Menu, FF loads and runs OK. I can open new tabs and have no problem loading other pages. However, even with FF open, if I click a link in an e-mail, I get the XUL Runner error message.
Although not all symptoms are the same, I am also having problems with IE8. When I run the program it loads, shows a 'connecting' message in the tab header, then closes. If I uninstall FF, then System Mechanic selects IE8 as the default browser, and as with FF, loads OK.
Chrome and Safari both run OK (thankfully). there must be someone out there who knows what this all points to - is that person you?!
Note: Trouble shooting information retrieved using FF when opened with System Mechanic.

If you have such problems then you need remove the Firefox program folder before installing a new copy of the full Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

HT204387 Hi I'm having problems with my Bluetooth please help me thank you

Hi I'm having problems with Bluetooth it wont light up

What light are you talking about?
iOS devices don't, by the way, have the BT profile for transferring files. You can connect to keyboards, headsets, speakers, car kits.

Having problems with Frontrow. Please help!

Hi,
i've been trying to figure this out all day today but i haven't found any solution. hopefully you Mac Geniuses can help. now, my problem isn't that my videos won't play, because they do. they all play perfectly. okay, so when i launch Frontrow, all my video files appear under their respective folders; my TV Shows appear under the TV Shows folder and my Music Videos appear under the Music Videos folder. however, for some strange reason, these files also want to appear under the Movies folder. That means they're showing up twice! -under the Movies folder and TV Shows/Music Videos. is there anyway to fix this, because it's really cluttering my Movies folder and i admit i'm a really anal neat-freak.
Also, i have correctly labeled the video files as Movie, TV Show or Music Video under iTunes. Everything is organized well under iTunes, so i doubt it's that.
please help!!
Message was edited by: ec84

It might be because with the new update, it seems as though anything stored in the MOVIES folder , shows up under movies in Front Row. I have a folder of Transformers AVI'S in my movie folder, now it shows up in the movie directory of front row

I'm having problems with my ringtones please help

I have tried everything to fix my BB Curve problem even down to the battery.   I have custom ringtones set for my husband and other family members. So whenever they call or text I know who it is.. Now my issue is that if I get a text from my son his ringtone will sound than if I get a standard text my son's ringtone will go again. Not the default for just regular ringtones. I took off my facebook becuase someone said that could be a problem. Verizon sent me a new phone and I entered everything manually so if there was something wrong I wouldn't transfer the problem to the new phone. It's not fixed. If someone could please help me. I'm getting ready to turn my BB off completely it's that frustrating. Thank you for any help.

It sounds as if you are saying that any "non-specific" SMS sender receives that text tone of the last one you have set a personal tone for who has texted you?
I don't know. I can only say that if you use those instructon in the guideline, they work.
There is a user here named Cathlabnurse, she has a good understanding of these settings... Maybe you could send her a Private Message to review your settings with you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Having problem with my cisco857w , please help

Hi Guys
I have cisco 857w, i managed to configure it and I use it as wireless modem router, I have PC, VOIP adaptor and 7 wireless devices connected. i can access the internet from all of them no problem ,but the issue I have is I can't ping any wireless laptops from any other wireless. the reason I need to do that is because i can't install my wireless printer on my wireless laptops. but also I have to mention the PC connected through one of the FastEthernet port of the router I can print to the printer wirelessly. this drive me crazy. I attached my config. thanks for you help
David

Hi David,
I believe it would be best that you post this thread in the Wireless and Mobility community
https://supportforums.cisco.com/community/netpro/wireless-mobility
You should have better chances there. Good luck!
Luis

If you're having problems with USB ports, read on...

i'm reading that alot of people on here are having problems with their front (or top) usb on their cases not working with their k7n2 boards. i have come across the correct solution to this problem in one of the posts (after having solved the problem on my own), however noone has posted the solution by itself on this forum so everyone can easily see it.
The trick is to make sure that pin 10 (at least on a K7n2 delta-L), the pin labeled USBOC (USB Open Connection), is wired to NOTHING. If the connector to your front usb ports is fused into one giant connector and it HAS a wire that will connect to this pin (labeled GND2 or Shield or something), CUT THAT WIRE. Pin 10 on JUSB2 (at least on a K7n2 delta-L) must be OPEN. If this pin IS connected to something (even if it is only GND), the motherboard will think something is connected to this usb port and you will get many unknown devices listed in your windows device manager and the rest of your usb ports may or may not work.
As a general rule of thumb, if a pin on a motherboard is labeled OC for "Open Connection" and you wire something to it, you're asking for trouble.
If you cannot understand this you should not be attempting to wire a motherboard in the first place.
Here is a picture to go along with this discussion. If you cannot see this picture, I am sorry for it has probably been removed from the place I posted it online as I cannot attach pictures physically to this post. If someone here has a way to permanently host this picture and post it to this thread permanently, that would be wonderful.
In summary: all usb ports/headers have only four pins associated with it (VCC, USB+, USB-, GND). If the connector (whether it's one big connector or individual sockets) to your front/top usb port has 5 sockets, don't connect the 5th socket to anything. That goes for any case/motherboard combination. This is what i'm talking about above. I have no idea why motherboard and case manufacturers have a 5th pin involved in any way on either the pin or socket side. It is not used for usb.
EDIT: I just noticed this has already been discussed in the trouble shooting guide in the above sticky post. oh well, now we have a pretty picture to go along with it (i hope).

:-D)Hello guys,
as promised I come back here to give the results of my tests... and I have to say that you saved my day (even if I had to open back 60 secured cases).
So the solution was the right one, when I unplugged the "ground" end of the front USB connector cable from the USBOC pin, those connectors finally worked as expected with USB 2.0 compliant devices.
So thank you really much for this very usefull information !
And even if maybe it's not only MSI's fault, I still believe that more information on those connectors in the user's manual would be really usefull (who knows what USBOC means except a few people and who could imagine that pluggin on it a "ground" cable would make it unserviceable ??). And who ever saw a user's manual bundled with a case ?? it's pretty unusual
Hope that someone at MSI will read that and take it into consideration, not for me (because now I'm aware) but for the thousands other consumers that will feel a little bit "annoyed" with that issue. I don't think that adding one line about it in user's manuals would be so much expensive
But I'm quite lucky myself... being able to understand and write english (even if I still have some progress to do ) gave me the possibility to find the solution... but a lot of my french fellows can't do that... and there's no french forum here... How can they do ? They rely on user's manual
Best regards,
Nicolas

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Is anyone having problems with Yahoo mail please ?

Hi,
I am having problems with yahoo mail. I have to log in and out a few times before the inbox will open. Having eventually got in, it fails to delete.
So I'm asking if others are experiencing similar problems please ?
Best regards,
dfenceman

Hi,
This problem seems intermittent. It was working OK earlier this morning but now I can't open emails, I'm getting the following error message "We’re sorry, but there appears to be a problem loading the email".
If I try forwarding the message to an alternative email address, as suggested on the Yahoo community forum, I get this error message "Yahoo Mail is having a problem retrieving the original email for reply or forward."
Has anyone got a fix, or even a workaround please ?
Can the mods help with this ?
Best regards,
dfenceman

Potential problem with my monitor, please help.

Hello
I recently upgraded my OSX to Mavericks and I've been having problems with my monitor, I've attached a screenshot of what is happening because I didn't know how to explain it and I'm unsure if its the OSX upgrade causing the issue or not, however I'm really worried about my monitor on my macbook pro.
The model I have is the 15" mid 2010 2.4Ghz Intel core i5 with 4GB RAM.

Still having this issue with my macbook pro monitor... There was no updates available and I followed every other possible solution, sometimes my monotor looks perfect like there was never any problem and other times my entire screen is just covered with this stuff you've seen in the above image.
I really have no idea what the exact issue is and how to solve it.
This macbook was given to me for university by the government as I have a form of dyslexia and because I've just finished my degree the insurance has ended... is there anyway I can still buy applecare insurance for my machine?! I got this MBP in 2010 so I've had it for three years now.
I'm just worried that one day I'll turn on my machine and the monitor won't work whatsoever.. and I thought apple was suppossed to be good and last a long time.
Hope somebody can help me further.
Thanks.

I have a iPhone 4S 16 gb and I am having problem with sim activation please tell me what to do

I have a iPhone 4S and I am having problem with its.activation plz tell me. The solution of this problem?

Did you already try these steps?
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
copied from iOS: Troubleshooting activation issues

Weirdest problem with ipod!PLEASE HELP ME!!!

Okay, i tried to load a playlist that had about 100 songs on it. While its loading, the update just stops. My ipod starts going crazy.The apple logo keeps lighting up and then the light doesnt come on but the logo is still there. You can hear the inside of it like trying to come on but then it just keeps doing the same thing til the battery life runs out! I really need help on this! I've tried to reset but everytime I do it it just keeps doing the same thing. I dont know if i should wipe all my songs off of itunes or what but im so confused and so aggravated with it. PLEASE HELP ME! I'D REALLY APPRECIATE IT!
Windows XP

Welcome to Apple Discussions!
See if any of these help...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz

I'm having multiple problems with Lion. Please help!

I downloaded Lion on the first day or release and it has been a very frustrating experience. Today, I reinstalled Lion hoping a fresh install would fix my woes but the problems persist. I'm in desperate need of advice and would appreciate any help from the gurus out there!
I have a 24" iMac with the following specs:
Problem 1) Ever since I installed Lion Safari is a nighmare. Roughly 30% of any given website loads. Below is a screenshot of www.apple.com:
Problem 2) No matter how many times I uncheck "restore windows after closing application" my mac opens EVERY window that was open previously. For example, I do a lot of graphics work and use Preview as my image medium. Every time I open Preview 100 + images load unless I go through each one of them individually and close each window. *****.
Supposed solution:
What Preview looks like each time I open the app: 100+ Images
Problem 3) Even with 4 gigs of ram my Ram is constantly ran into the ground ever since the upgrade and my computers performance is in the gutter. I have to constantly use "MemoryFreer" to free ram which is sometimes down to 14 MB free out of 4 Gigs.
PLEASE HELP! Thank you!
Justin

RáNdÓm GéÉzÁ wrote:
Whether the line is old and tired or not, people are free to express their woes along with trying to find a fix.
TBH, Lion is a bit of let down, regardless fo whether there are issues present or not on your particular setup/system etc.
If a clean install has not fixed the issues above, I would be tempted to appraoch a Genius Bar and show them the problems. This may be faulty RAM and something that needs to be demonstrated, before a fix or repair can be considered.
Best of luck.
Yes you are correct, and as the OP did, questions are asked and other users try to answer. As for the poster I answered, he did not ask a question, but expressed extreme disappointment which he is entitled to do, therefore I suggested he have a read through some of the other threads to perhaps address whatever issues he is having. As you say it could be faulty RAM or a bad installation, or a hundred things inbetween. That is why you need to hunt down similar symptoms to narrow it down. Or if you are under warranty, let the Apple Store fix it.
Good Luck

My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

Having major problems with iPod Shuffle, please help!!

Okay, I have a 2nd iPod shuffle and it just will not connect to my computer. I've used to adaptor that came with it and it worked once but I only added a couple of songs and I want to add more now but I can't! The light blinks orange 3-4 times and nothing happens on my PC. I borrowed my friends charger and absoloutly nothing happens with his. But I can still charge it because I have a USB wall charger which I can connect my charger to and it charges perfectly with that. So, naturally I thought there was something wrong with my PC/USB sockets. So, I tried it on my friends computer - same results as with mine. I can't use the reset utility though because I'm running Windows 7 on 64 bit and there's no download out there for that. Please help somebody - I really want to add more songs to my iPod, and this is becoming really frustrating. :/

Okay, so maybe I wasn't clear enough when I said nothing happens on my PC? Well, literally nothing at all happens on my PC, it doesn't show up in My Computer or iTunes.

Having problems with USB cable, please HELP!

Similar Messages

Maybe you are looking for