Having stopped audio with a swf inside a sidelet can someone create a swf that will resume the audio

Ok, rick is going to post the fla of this file and I will
post the swf. Basically this is all about having a slide that has
audio running all the way through and enabling the user to roll
over a sidelet and have the video and audio stop playback.
At present, the max you can achieve is, to stop video. The
audio keeps going and of course everything gets out of
sync. Rick has create a swf that you input into a sidelet (
after having imported your image or video ) which stops the audio.
Fantasitc. Unfortunatly he was not successful in creating a swf
that will resume the audio.
So there is the mission. To create something that will resume
the audio, be it a swf inside the sidelet or something else.

Hi there paul. Am I right in thinking that your code will
mute the audio. In my situation this would cause problems becasue
you would roll over the sidelet - the audio would go silent and
when you rolled off, or resumed the audio, it would have been
playing so again the video and audio will be out of sync.
Rick - rather than another swf which would activate the audio
and video when you roll off the sidelet ( while that is the perfect
solution ) what about looking at a button the user can press to
resume things, maybe Im wrong but that sounds a little easier.
( however for all those reading this that is not really the
solution I am looking for, what Im looking for is the above
solution where you can just roll off and on and so on )

Similar Messages

Can someone create a .swf animation for me ??i'll pay

Can someone create a .swf animation of a running soldier for me, i need it for a powtoon presentation, It does not have to be sophisticated. i just cant use the generic guy in suit running. im willing to pay

What direction
Like facing forward or right or left or behind.
I'll try my best.
and no need to pay.
but facing forward or backward is really hard and i cannot manage that though.

Every once and awhile, the audio on youtube is gone. If I switch to another browser that very instant, the audio works fine. Any ideas?

I really have no idea what is going on, so I can't be much more specific. I'm using Windows 7 64-bit and Firefox 3.6.13. It only happens when I use YouTube.

Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
See also Flash Local storage settings:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

If i have a form with check boxes. Can I add a button that will display the boxes that the user selected on a new page?

For example, there are 10 check boxes and the user selects 5 of those boxes. Then they click a submit button. Just the information from those boxes would be displayed so they can print it. Is this possible? Any help pointing me in the right direction would be appreciated.

That is definitely possible.
Option 1: checkboxes are all named differently.
In the click event for the submit button, add some code like this...
if (cbChoice1 == "1") p2.tfChoice1.presence = "visible";
else p2.tfChoice1.presence = "hidden"; //can use "invisible" if preferred
if (cbChoice2 == "1")...
Option 2: checkboxes are named the same
In the click event for the submit button, add code like this...
var checkboxes = xfa.resolveNodes("cbChoice[*]");
var textfields = xfa.resolveNodes("p2.tfChoice[*]");
for (i=0; i<checkboxes.length; i++){
if( checkboxes.item(i).rawValue == "1") textfields.item(i).presence = "visible";
else textfields.item(i).presence = "hidden";

Audio suddenly stops working with my voice over although I can see the track there is no sound?

So I'm doing a project and recording voice, in several parts, over with no problems. I go to play back and it all works just fine for a few minutes then the audio suddenly cuts out. I can see all the clips with the associated graphs and can't see any issues, the audio just stops???

If it will not connect to your computer, and it will not connect to the Internet, either via WiFi or cellular data, then there is no practical way to extract the information. There are no magic words that will fix the broken hardware.
You could try a 3rd party data recovery service, but doing so will forfeit your right to a discounted out of warranty replacement. Only you can decide it it's worth that.

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I had an Apple ID and password with my hotmail acct. The password stopped working, so I set up a new one with my me acct. How can I access my old acct. and merge the two of them?

I had an Apple ID and password with my hotmail acct. The password stopped working, so I set up a new one with my me acct. How can I access my old acct. and merge the two of them?

https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot?language=C A-EN&app_id=2417&newWindow=true&border=false

I would like to play music from my iphone 5s on a sound bar with an iphone 3 dock. Is there an adapter available that will play audio please?that will play audio please

I would like to play music from my iphone 5s on a sound bar with an iphone 3 dock. Is there an adapter available that will play audio please?

The genuine Apple adapter works for me, most cheap knockoffs do not support sound ,it is usually in the micro print at bottom of the ebay offerring
It is pricey by comparison but it works and the knock offs usually don't pay the patent licence fee hence they guess the technology that is in the lightning plug
and charge a minimal price

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system

I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

I am having trouble sending an audio signal from my computer (mac pro early 2009) to my TV. Is there some interface or adapter that allows /enables the audio input from my computer to be sent to the TV (R,L signal?) any suggestions

just the audio, eh?. If you were using DVI or DisplayPort that might be different, but for audio alone, it shouldn't be that hard. Just grab a 3.5 mm stereo plug to 2 rca cables adapter. Plug the smaller end into the back of your Mac Pro (or the Front), where you see either the headphone or speaker icon). Alt-click on the speaker icon at the top of your screen to show all audio inputs and outputs. Make sure it's set to Line Out. Plug the red and white end into the audio in jacks on the back of your tv and set it to the correct input. I don't know if your tv will allow just the audio to play. Usually one has to connect up something else, but hopefully I'm wrong. If you were using DVI, or DisplayPort, you'd need an active DVI--HDMI adapter or a DisplayPort to HDMI adapter, but
I don't know for sure
J B

Trying to make a disc.img from an iMovie project get the mssage that some of the audio clips are not available. The clips still show as green bars in the project but do not play.

I successfully made a disc.img and then burned a DVD of the project but found an error in a title. Went back to the project, corrected the error, and tried to create a new disc.img but got the message that some of the audio tracks were unavailable. They still show as green bars in the project but do not play. Tried deleting and reinstalling them with no success. They do play in iTunes and in the iMovie editing pane
Thank you

inspired2apathy wrote:
... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
... What am I missing?THE BASICS. See if this isn't what you are trying to do.
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class Test
public static void main(String[] args) {
    JTextArea ta = new JTextArea();
    ta.setLineWrap(true);
    ta.setWrapStyleWord(true);
    JScrollPane sp = new JScrollPane(ta);
    JFrame f = new JFrame();
    f.getContentPane().add(sp, "Center");
    f.setBounds(0, 0, 400, 300);
    f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
    f.setVisible(true);
}OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times.

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein

When I play movies on MPlayerX the audio delays and when on VLC its pixilated?, When I play movies on MPlayerX the audio delays and when on VLC its pixilated?

When I play movies on MPlayerX the audio delays and when on VLC its pixilated?, When I play movies on MPlayerX the audio delays and when on VLC its pixilated?
My Macbook Pro is 15-inch, Early 2011
4 GB 1333 MHz DDR3
Intel HD Graphics 3000 384 MB
running on OS X 10.9.1
100GB free

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

Having stopped audio with a swf inside a sidelet can someone create a swf that will resume the audio

Similar Messages

Maybe you are looking for