Having the Same Problem

Hello! I didnt have any problem with my N73 sync'ing with my Macbook on Leopard, until yesterday, when I decided to upgrade its firmware.
I have the 4.0738.2.1.1 Firmware
And My Mac is running on Leopard 1.5.2
It seems that nokie cant keep the connection active to my Macbook.
The console shows the following error:
21/03/08 05:29:32 p.m. System Preferences[28297] BluetoothSDPDataElement an SDP type "String" can not be encoded in an NSString (it is not UTF8)
21/03/08 05:29:32 p.m. System Preferences[28297] BluetoothSDPDataElement an SDP type "String" can not be encoded in an NSString (it is not UTF8)
21/03/08 05:29:32 p.m. System Preferences[28297] BluetoothSDPDataElement an SDP type "String" can not be encoded in an NSString (it is not UTF8)
Any help would be greatly appreciated

Similar Messages

I am having the same problems as several posters here.

I am having the same problems as several posters here. My note 3 was pre-ordered and worked fine until may 16th of this year. This was the date of an ota upgrade to kitkat. After apps were "optimized" I first noticed such a power drain that my phone lasted 4 hours on standby without use. I uninstalled several apps including facebook which and rolled back google play services for several days. This helped my battery life which extended from 4 to 12 hours at low use. Previously, I could use the phone for nearly 48 hours without charging and using a number of apps which involved graphics, sound and data. Which leads to my next point, any graphically charged app (games generally) causes my phone to heat up tremendously and the phone leaks power like a sieve; again I reiterate this began may 16 with an ota update to kitkat which was rolled out by verizon MUCH later than other carriers but clearly didn't involve fixes. Finally, and the most nagging problem of all....my mobile connectivity has been shot. I have dropped calls, I have had to drive to get signal, I have missed calls and I cannot afford this!! I am a home health nurse and must be in contact with MD offices and patients. Even mobile connectivity in my home is affected as I have two bars at max. I have noticed the wireless indicator go from 0 to 5 bars in a rapid cycle 5 to 6 times in a few second period and result in "no mobile network found" if I try to call anyone. This service is unacceptable and I don't want to have to root my phone as I am not sure that this would fix the problem. This is a 700 dollar phone and I shouldn't have these problems. If a solution cannot be reached, I am under contract for another year and several months and I demand a new phone. I will be saving all communications (or lack thereof) via screen shot for documentation.

markaandersonco2006,
Have you tried wiping your cache partition? I noticed extremely poor battery life after the KK update, like you, (maybe 5 hours of use before requiring charging) and I saw a message on one of the Android Central forum (actually for the AT&T version of the Note 3) that mentioned to try wiping the cache partition. That appears to have worked. Since then, my battery life has been phenomenal. I don't know why this worked, or the downside of doing it. But it worked.   As I write this, my battery is at 66%, and has been on for 14.5 hours (with one brief charge of 15 or so minutes in my car last night).
Wiping the Cache partition from Recovery Mode
This won't erase any important data. Perform the following procedure:
1) Turn off the device.
2) Press and hold the following three buttons at the same time:
     a) Volume Up key
     b) Home key
     c) Power key
3) When 'GALAXY Note 3' appears on the screen, let go of the Power key but continue to press and hold the Volume Up key and the Home key.
4) When the Android System Recovery screen appears, release the Volume Up and Home keys.
5) Press the Volume Down key to highlight 'wipe cache partition.'
6) Press the Power key to select and wipe the cache.
7) With 'reboot system now' highlighted, press the Power key to restart the device.
Good Luck!

TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

We have a 10 person office - all either use Acrobat XI or Reader XI. One person is on Windows 7. The rest are on Windows 8 (not 8.1). I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are a

We have a 10 person office - all either use Acrobat XI or Reader XI. One person is on Windows 7. The rest are on Windows 8 (not 8.1). I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all. There are different error messaged depending upon the doc. Some are regarding the fonts, for example "can't extract the embedded font...." Others are "insufficient data" errors. There are more, but for purposes of keeping this short, I won't include them. Another unrelated issue is that we are having trouble printing excel files to pdf. The files end up with bad formatting. I've worked with adobe "chat" support, our IT consultants with no resolution. I also haven't found any similar "known issue" online Would very much appreciate any assistance. Thank you

The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct.

I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me. Anyone else having the same problem?

I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me. Anyone else having the same problem or know how to fix this?

The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Have a look at this it might help
http://support.apple.com/kb/TS4148

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
(99115)

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.

dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on...

Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

Your System Details are showing Fun Web Products. Suggest you look in Add-ons - Extensions and Plug-ins, and Control Panel>Add/Remove programs or >(newer version) Programs and Features. You could also do a search of your computer.
Fun Web Products(associated with MyWebSearch) always seems to cause problems, Alexa does, too, but less often - there may be conflicts.
I'm not an expert on these two products. I'm afraid I can only alert you to the problems. Google will show you plenty of evidence of problems. You might also try the Search Firefox Help box above - a gold mine but it usually requires a lot of digging.
You can start Firefox in Safe Mode - Hold Shift Key down as you double click on the Firefox icon>ignore the page that opens>Continue. If that improves things you could do a little troubleshooting(Safe Mode, Problematic extensions etc), use default theme, -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
http://support.mozilla.com/en-US/kb/Troubleshooting%20plugins

Macbook Pro 2,33Ghz Core 2 Duo Radeon X1600, it has been presentng screen artifacts since a year ago. It is not in warranty now, but I read in the web that plenty of people is having the same problem as an early degradation issue. Solution?

Macbook Pro 2,33Ghz Core 2 Duo Radeon X1600, it has been presentng screen artifacts since a year ago. It is not in warranty now, but I read in the web that plenty of people is having the same problem as an early degradation issue. Sometimes the system freezes and stops respondign so I have to restart and lose all the unsaved work. A few moths ago, the Superdrive stopped recognizing the disc because of a firmware update released by Apple!! It is not acceptable. Solution?
Apple should give a solution to all these people who spent more than 2500$ in a laptop that has stopped working in less than 3 years!
http://reviews.cnet.com/8301-13727_7-10330060-263.html

Yes, it appears the X1600 has more than its fair share of issues. I've seen reports of people reflowing the solder joints on/around the GPU with success, even baking the LB in the oven.
The rest is something you'll have to take up with Apple.

It seems that my ipad will no longer connect to aol or yahoo mail. this has happened within the past month. my mother's ipad and my cousin in a different state is having the same problem. i upgraded to ios6 and my mother has not so that is not the issue.

my ipad will not connect to yahoo or aol mail, anymore. my mother is having the same problem and also a cousin, in a different state. my cousin and i upgraded to ios 6 and my mother did not. i do not understand why this is happening.

I should add that i have also done:
- reset (holding two buttons)
- updated software to latest IOS
- done a full restore to original settings
None of this has solved the problem.

I am not having problems with wifi but ipad will not accept my password in the secure mode. anyone else having the same problem?

I am having problems with the Ipad accepting my password in the secure mode in Wifi. I can get into wifi when the secure mode is off. This only started when I downloaded the lastest update for the Ipad. Anyone else having the same problems? I have rebooted the Rotar and still doesn't work.

I am not.
Which secure mode are you using with your wireless network - WEP or WPA?
Have you tried forgetting this network on your iPad, and/or resetting network settings on your iPad? Both will require rejoining the network and the latter will require rejoining every wi-fi network your iPad has access to when returning within range of the network.

Any one in eastern colorado having the same problem as me, no service

We upgraded to the droid razor last xmas. The new razor had worse reception than my old flip phone. I have been a Verizon customer for over 13 years. It seems that the last several months the service in our area has gotten even worse. Now to send or receive a call I have to go outside, point my head to the south, hold my tongue out to the left, cross my toes and I might get a signal. Then when I get a call through, I get dropped in the middle of a conversation. My wife is disabled, she is able to keep her cellphone with her at all times. But when she needs to get ahold of me at work, if she can get through to me, all I hear is garble. I don't know if she is ok or not. Pretty sad when I have to wonder if she could even call 911 if needed. We are paying over $200 a month for our plan and cant even use the phones in our own home. Anyone else having the same problem?

Oxford,
I just upgraded my 5 phones to the Razr M and I am having the same problem. I switched one of the Razr Ms to a Razr HD and it does the same. If I am lucky I will receive 2 bars in 4G while at home, with my old phone (Droid Bionic) I always had full bars. My signal strength is usually around -110dBm to -120dBm in 4G, Now that should nomally be at -75dBm for a good signal. Tech support keeps putting a ticket out, but nothing has been resolved. Verizon's solution to this problem was for me to spend another $250 on a signal booster for our house. I think it would better serve me to spend that $250 on a lawyer and file a class action lawsuit against them. We are not the only people having the problem either, people all across the country are having the same issues. My guess is that Verizon is having major issues with their LTE network and do not want to admit it. I am paying over $300 a month and I am about to cancel all five phones and go with another provider.

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario

Having the Same Problem

Similar Messages

Maybe you are looking for