Having trouble installing mavericks on a second partitiion

I have an older 2009 MBP that has been running Mavericks for a while now. I erased the drive and loaded Leopard to run a few programs. I created a partition for Mavericks and for Yosemite. I can't seem to get Mavericks to open on the second partition to install. The error I get its , "not supported by this architecture.
Am I doing something wrong? I thought you could load a boot drive by pressing command R when starting up the Mac.

When you formatted the hard drive, were you sure to use HFS+ GUID?  Apple Partition Map will not work, neither with NTFS, FAT32, or ExFAT.
Note Mac Pro is a desktop tower, whereas MacBook Pro is a notebook.

Similar Messages

  • Having trouble installing mavericks due to damaged disk

    having trouble installing mavericks due to damage disk. 

    Same here. I tried loading Mavericks on an early 2008 iMac. Apple Care says the failure is due to a bad hard drive. Even though I was not experienceing any problems prior to installing Mavericks. I’m skeptical. I must now take the iMac to Apple for repair.

  • Anyone having trouble installing mavericks?

    When I click Install App on the app store site, nothing happens.

    I installed it successfully on two MacBook Pros but when I try it on my iMac a little progress wheel spins for about a second but no download starts. I've cleared the cache on Safari, run disk repair to repair permissions, and restarted but no luck. I got the wheel to sping for about 4 seconds once but still not download.
    i'm going to try logging out of the app store and back in to see if that helps.

  • Having trouble installing iMovie HD on a new Mac with Mavericks

    I am having trouble installing iMovie HD on a new Mac with Mavericks.
    I know that iMovie HD works with Mavericks because we are using it on other Macs successfully.   However, those machines were upgraded starting with OS 10.6.   In other words, iMovie HD was installed on these Macs when the Macs had Snow Leopard.
    When I use the iLife 06 disc, I am presented with “You can't open the application “iLife 06” because PowerPC applications are no longer supported."
    I understand that iMovie HD  is universal, not PowerPC.  How can I get past this to install iMovie HD.
    Thanks

    OK, I made some progress.
    I used Pacifist (Shareware) to open the iMovie HD 6 install packages from the iLife '06 installer DVD (iMovie.pkg and iMovieThemes_Tiger.pkg) and let Pacifist install them to the right places.
    But doesn't iMovie HD 6 require QuickTime 7 to work ?

  • Having trouble installing an HDD.

    Just bought a Seagate 7200.8 HDD from Fry's and am having trouble installing it. The drive is SATA.
    I've enabled the SATA in bios and also enabled the SATA DMA transfer. I put the drive in and Windows detects it. It shows up in device manager under the disk drives setting. However it does not show up under My Computer so that I can format it. Also the safely remove hardware icon is appering in my system tray for the HDD. I am completely confused.
    This is my first SATA drive install so I don't know if i missed a step or did something wrong.
    It appears in the bios on IDE channel 4.
    One thing I am not sure about is in device manager under the general tab for the drive it's location is listed as "Location 0 (Secondary ATA Channel) which I know cannot be right. That is where my DVD burner is on my second IDE channel.
    I am totally lost.
    Anybody have any idea what is messing me up.
    Thanks in advance.

    In the properties of the Taskbar. Right Click in the Taskbar, choose properties then click in Hide inactive icons so it be ticked the click in the Customize button search for the Safely Remove Hardware icon and choose Always Hide from the Dropdown list....that's it.
    PS: Np...You're always welcome...
    Be well....

  • Having trouble installing photoshop elements 10. Keeps telling me "file archive part of PS ele 10 is missing. need all parts to extract??

    Having trouble installing photoshop elements 10. Keeps telling me "file archive part of PS ele 10 is missing. need all parts to extract??

    there are two files for win os, an 7z and an exe.
    download both, place both in the same directory and click (or double click) the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • I am having trouble installing Lion on a partitioned hard drive.  Help?

    Aloha:
    I am having trouble installing Lion on a partitioned hard drive
    I have three internal HD's   The first I am running the system on 10.6.8 (which is up to date) , the second I do most of my work on  and the third I have partitioned into two and I am trying to install Lion on one of the patitions.
    But Lion has decided it will only go on the first HD.
    Above is the one I want to put it on, but it's not available and I can't change the partition scheme.  None of the things the directions state are usable??
    What might I be doing wrong?
    Thanks
    Dan Page

    Thanks again for a rapid responce.
    I finally got lion on one partition and my daily "SilverKeeper" backup on the other.
    Since the only thing I had on the two partition Hard drive  was  the back up and since the backup would get put on tonight any way I changed the drive to no partitions.  This gave me the ability to choose the GUID option, which I did and then I installed two partitions and successfuly istalled Lion on one of them.  I even tied Lion into the iCloud successfuly.
    But I am not out of the woods yet!  I brought My brand new iPad to lunch and was informed that my iPad was synced to my Lion at home and I was on the cloud.  That blew my mind, I was impressed.
    I then read  the Daily news with out problem, however, when I shut down my iPad, that was all she wrote.  I can not get the iPad back on.  The best I could do was see the revolving gear start and then freeze.  It's on charge now and I can not even get rid of the frozen gear.
    Not sure this all has anything to do with the  recent installation on my main computer, but it's mighty suspicious.
    Need some help!!
    Thanks
    Dan

  • I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

    I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
    this is what I get
    -- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

    I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Having trouble installing Adobe Reader 8, know it's outdated, job requires it. System is Windows 7

    having trouble installing Adobe Reader 8, know it's outdated, job requires it. System is Windows 7 Home Premium. Thank you.

    You may see if there are solutions in this old thread: http://forums.adobe.com/message/3063830
    Although that combination isn't supported, many people have made it work.
    Why would a job require Reader 8? All older files are compatible with newer versions. Or at least they should be.

  • Having trouble installing Photoshop  Elements 13. [was: I wonder if somehow I might have went to Creative cloud because something crossed my screen, but I am not used to doing this so]

    I could really use Customer Service help. I received Photoshop Elements as a gift for Christmas...I waiting until i got a new laptop so that I could use that as i was having trouble with older computer. However, I am having trouble installing the software...I swear the dvd added the programs, and I saw them in files explorer i think, but then I cannot find or I was not even able to add the serial number to my knowledge, because it was blank...no keystrokes were shown...and i don't see the program anywhere...Could I have down something wrong and it is somewhere in the cloud?

    Thank you. That's what I first thought that I didn't need to do anything
    but install from the dvd drive. However after the agreement, it asks me to
    sign in at adobe. (Sorry, I'm a little tired of looking at this right
    now)...I'll try again tomorrow.
    There is no one that I see how to start using the program as I must sign
    in. However, I have never been able to get the number to your firm. Or get
    the correct number... I think I clicked on a learning tutorial or browsed
    Adobe's website to learn more, but got caught up in all the details.
    I never uninstalled virus protection to run it because I thought that it
    would ask. I'll try again tomorrow I am frustrated. Thank you for your
    patience. I appreciate it totally. It's really sad cause I really wanted to
    create. I have wanted this for a very long time and I can't believe how
    difficult this has been. It would be really nice to know what is really
    wrong. I must not be seeing something or I've done something.
    On Mon, Apr 6, 2015 at 10:08 PM, Ned Murphy <[email protected]>

  • Is anyone having trouble installing Adobe flash player on a MacBook Pro?

    Is anyone having trouble installing Adobe flash player on a MacBook Pro with OSX 10.7.5?

    Thanks for your help here is what I did so far!
    I have uninstalled Adobe and reinstalled it, I've tried restarting my browser, then my MacBook Pro without any success!
    When I click on the Apple in the upper left hand corner and open System Preferences I can see Adobe Flash Player on the bottom under the Other section.
    If I open Adobe up and check the version it tells me that I have the most recent version!
    I even uninstalled Adobe and installed the newest Beta version, but Adobe is still not working! If I check for the latest version it tells me that I do have the latest beta version, but it still doesn't work!
    If the person who made the video used any other video player it works!
    Their player, plays the video without a problem!

  • Having trouble installing Photoshop & Illustrator on Mac OSX 10.7.4

    Hello Im having trouble installing Photoshop CS6 and Illustator CS6. I am geting the following errow while trying to install in Creative Cloud Download Manager:
    Exit Code: 34
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 0 error(s), 0 warning(s)
    FATAL: Payload '{9FC6805B-9FD9-410A-A620-51D58644999D} Camera Profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.2.10.0' information not found in Media_db.
    What should I do? I've installed them before, but uninstalled them both. Now I am getting the following error. Thanks! Any help will be appreciated.

    It is difficult to determine the point of failure from your install log summary.  I would recommend reviewing the install logs in their entirety to locate the exact error.  You can find details on how to accompplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Having trouble installing Photoshop on Mac OSX 10.7.4

    Hello Im having trouble installing Photoshop CS6 and Illustator CS6. I am geting the following errow while trying to install in Creative Cloud Download Manager:
    Exit Code: 34
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 0 error(s), 0 warning(s)
    FATAL: Payload '{9FC6805B-9FD9-410A-A620-51D58644999D} Camera Profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.2.10.0' information not found in Media_db.
    What should I do? I've installed them before, but uninstalled them both. Now I am getting the following error. Thanks! Any help will be appreciated.

    There are a number of thread on this.  So it might be faster for you to do a web search exit error 34 photoshop to find solution.

Maybe you are looking for

  • View Planner 3.5 - Unable to generate PDF report.

    I'm running into a problem where the run completes successfully and data is downloaded but generation of the PDF report fails.  I was able to successfully generate a PDF for a single VM local mode run but it is failing for a multi-VM local mode run. 

  • ABAP and Java Stack: Which to choose/supported standards and components?

    Hello, I am trying to understand the role of the two stacks in NW. Maybe anyone has a few hints where I can find answers to the following questions: - An overview of supported Standards (Java 5 since when?) - An overview of which component runs on wh

  • Hide the expansion icon on a jtree.

    I need to hide the expansion icon (the "+") on a jtree. I tried to use DefaultTreeCellRenderer and the L&F options, but they hide all of the "+" icons of the tree. I need to hide the icons depending if the node has no-leaf icons. Thanx. pmadridb

  • I cannot use customize or edit buttons in Mymsn, after 4.0 download

    Now that I downloaded 4.o , and open my 'mymsn.com' home page, I only can use the links that have been set up. I cannot use the customize keys, edit keys or add new items. I opened this up in Explorer and it still works there. Something happened afte

  • Url.openConnection with PROXY

    How can I do a url.openConnection through a proxy WITHOUT CHANGING THE SYSTEM PARAMETERS ??