Having trouble with Airport connecting with Verizon wireless modem.

Having trouble with Airport connecting with Verizon wireless modem.  Any ideas?

Haven't asked Verizon.  I think it is in my settings for Airport.  Need to know proper settings.

Similar Messages

  • Having trouble bridging wired connection with Airport Express

    I've had an Airport Express Base Station for a little while, really only using it to wirelessly print and stream my music.
    I'm at my college now, and there's a campus wide wired network. I've been trying to bridge this network so I can wirelessly connect to the internet with my laptop, Nintendo DS and eventually Nintendo Wii. The problem is that I can only get the orange blinking light on the AEBS, I don't have the software that came with it (though I have the Airport Admin and Setup stuff under Utilities), and the computer doesn't seem to recognize the base station at all.
    I'm an idiot, I'm pretty certain, but is there something easy I am overlooking here? Will an AEBS not bridge a wired network unless it's cable or DSL? I'm unclear on exactly what kind of network my college uses.
    thanks!

    Most likely your college's network is providing NAT/DHCP services. I suggest that you set up your AirPort Express Base Station (AX) as a "wireless bridge."
    To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
    Network tab
    - Distribute IP addresses (unchecked)
    - Apply the new setting.
    - Wait at least 5 minutes.

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • Hi, I having trouble trying to connect to the wifi, I know the passwords and checked with others divises but with the mac os x 10.7.5  mac os x lino

    Hi, I having trouble trying to connect to the wifi, I know the passwords and checked with others divises but with the mac os x 10.7.5  mac os x lion is not working
    One of the wifi connections said "time out" or did not recongnise the password

    Hi andrea122,
    Thanks for visiting Apple Support Communities.
    If you're not able to connect to Wi-Fi on your iMac, the troubleshooting steps in this article can help:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    Jeremy

  • Having intermittent Airport connectivity with a 2010 6 core MacPro.  Any help?

    Having intermittent Airport connectivity with a 2010 6 core MacPro. When it works has low bars on status graph.  Laptop set up next to it has no connect problems. Airport utility has shown no Airports a couple times when the laptop showed all. When first joined network, staus bar is full, then drops to one or two bars. Would this be an antenna or card being loose? Is it user friendly fix, or bring it to Apple? Thanks in advance.

    Would this be an antenna or card being loose?
    Sounds like it.
    Is it user friendly fix, or bring it to Apple?
    If under AppleCare, bring it to Apple. If not, you can probably find instructions to fix a loose antenna connector yourself.

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Unreliable AirPort Connection with New C2D MacBook

    I know there are quite a few threads about this exact same topic going around right now, but I've followed all the suggestions out there with absolutely no success... So here's my version of this sob story.
    I bought my new C2D MacBook last week and thought getting online would be as easy as turning it on and connecting to my existing wireless network, using a D-Link router. I was able to connect immediately with a full AirPort signal, but the performance has been spotty at best. Some web pages load immediately, some load very slowly, some don't load at all. Mail and iChat are never quite sure whether I'm connected or not, and go back and forth between being connected and offline. With other computers on this network I've enjoyed wireless download speeds as fast as 220 kbps, but with certain downloads on this computer I've seen speeds start out at 150 kbps and drop down to a staggering 4 kbps... I might as well go back to dial-up.
    Other pertinent information... I've had 3 other Macs hooked up to this wireless network before (2 G4-based laptops and a first generation Intel iMac, all with AirPort Extreme) with absolutely no problems. I've followed all the advice that others have posted about this so far, like updating the firmware on the router, resetting it, resetting my computer, creating a new user, trashing my preferences, all with no effect.
    I was reading another thread where they discussed how the brand new MacBooks are shipping with the new 802.11 n cards, which is great for the future... But does that mean my existing wireless network is now obsolete, thanks to my new laptop? Am I out of luck until the new AirPort Base Station starts shipping eventually? Considering the money I just dropped for my new laptop, I'm not exactly keen on spending another $200 just to get my new laptop online. Nowhere in any of my documentation or even in System Profiler is there any mention of this new technology.
    I've basically been an Apple customer and advocate my entire life, and I'm very disappointed in my latest purchase. You're supposed to be able to take a Mac out of the box and have it work, which is one of the reasons why I buy from Apple instead of anyone else. Hopefully this will be resolved soon!!

    FYI, someone posted a novel suggestion in this thread:
    http://discussions.apple.com/thread.jspa?messageID=3875203
    "After a bit of online research I found some Linux folks using 'newer' Atheros wifi cards (like the Macbook C2D) were having the same problems with their driver software. The workaround was to either wait for a patch, or change the beacon interval on one's wifi router.
    One cannot do this with the Airport Express, however, I have found that increasing the multicast rate prevented this problem from happening again. In my own mind, I reasoned anything that improves network performance should make things better, and it did. My setup is 802.11g only, WPA2 and a multicast rate of 12 or above seems to do the trick."

  • Problems with airport connecting

    Hello can anyaone help me figure out this phenomenon that I have encountered with Airport connecting to a linksys wireless router. I have connected to it numerous times in the past with my Mac and have had no problems, but lately I am unable to connect. I get a connection error message from my airport utility. My iPhone ha the same issue, although IT had no problems connecting before. No changes were made to either device manually. Can someone shed some light on the issue, thanx. Is there maybe some other program to use with the Mac OS that is a bit more in depth, VS. the regular airport connect? Thanks and all the best everyone.

    What wireless router are you using? Does it use WEP or WPA for security? If it has multiple channels, have you tried using a different channel?
    In Tiger, you go to System Preferences Network pane and, next to Show, select +Network Port Configurations+. That will show a list of network services and the order. I have services I don't used for networking (such as FireWire, Bluetooth, and Internal Modem) unchecked. In Leopard, the unused services have been removed from the list.

  • Me and my wife are having trouble  updating are apps with itunes it keeps saying that our passwords are incorrect

    me and my wife are having trouble udating our iphones with itunes our passwords havent changed. when i try to udate my iphone her email address comes up and wants her password and when she udates her iphone apps my email address comes up and sometimes it says the passwords are incorrect. is the problem that i used my credit card . we dont buy apps we just get the free ones. she tried one time to use her credit card and it would not take the card no. can u help me with this problem. just to let you know i did the other day change my password thought that might help but it didnt

    Read here  >  How to use multiple iPods, iPads, or iPhones with one computer

  • I am having trouble viewing PDF's with Adobe Reader XI

    I  am having trouble viewing PDF's with Adobe Reader XI

    I am using Windows 7 home edition and using Internet Explorer 10
    The PDF's are online on websites that I am trying to open.  Both on the site as well as trying in a new window.
    Thank you
    Jeff

  • Having trouble opening a pdf with Adobe...keep seeing an error sign "acroExch"  does anyone have a way to fix this?

    Having trouble opening a pdf with Adobe...keep seeing an error sign "acroExch"  does anyone have a way to fix this?

    Hmm, "Use Adobe Reader" should launch the PDF outside of Firefox in the stand-alone Adobe Reader application, so seeing it in a tab is something of a puzzle.
    Could you check your version of Adobe Reader? For Windows 7, you normally would have the Reader XI series (Reader 11), which has had several updates. From inside Adobe Reader, you can use Help > Check for Updates to make sure it's current.
    In Firefox, could you check your Adobe Acrobat plugin version or possibly versions? You can view that on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins. If you find multiple versions, this can cause problems and may need to be cleaned up manually (post back on that for suggestions).
    Sometimes, the settings file which stores those download handler preferences becomes corrupted and there's not much else to do than to rename or remove that file and let Firefox rebuild it.
    To do that, open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This will launch a new window (Windows Explorer window) listing various settings files.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then rename '''mimeTypes.rdf''' to something like mimeTypes.old
    Start Firefox back up again and "PDF Files" should be back to their default setting of "Preview in Firefox". Try changing that to "Use Adobe Acrobat (in Firefox)" and test to see whether there's any improvement.

  • Having trouble sharing my folio with a client

    I'm having trouble sharing my folios with clients.  I clicked the share button and sent the e-mail to the client.  They received the e-mail and signed up for an adobe account.  When they try to log into Adobe Content Viewer on their iPad using their Adobe credentials they keep getting log in failed notices.  Does anyone know why this is happening?  Thanks.

    After they log in and accept the terms they should be able to log into the ACV with that account and download the folio.

  • I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

    I am having trouble installing lightroom 5 with this error message:
    Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
    what should I do? Billmeb

    Hi BillMeb,
    Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
    Regards,
    Romit Sinha

  • Im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    im having trouble activating my CS2 with my original serial number as well as the new serial number privided by Adobe

    You must download and install the CS2 version provided by Adobe and you must use the new serial number provided by Adobe.
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

  • Hello guys. I'm having trouble opening Instagram pages with Safari.

    Hello guys. I'm having trouble opening Instagram pages with Safari. I try to open them and it seems to be loading for one second, but then it's all blank, there's nothing on the screen. Funny thing is, when I try to open an Instagram page that doesn't exist, it opens the Instagram NOT FOUND page. I don't know what's going on. I've tried everything, from software updates to restarting my Mac etc. Please help.

    Is this the site you are referring to >   http://instagram.com
    Because that site refers you to apps for smartphone devices. Not for your Mac.
    Regardless of the Instagram website, v10.5.4 is an outdated version of Safari. You need to update your system software.
    Click your Apple menu  top left in your screen. From the drop down menu click Software Update.
    Restart your Mac after the updates are installed, then try Instagram on Safari.

Maybe you are looking for