Having trouble with images in old Aperture Library?
I have and old Aperture Library that I updated. I opened a project in that library and tried to export some photos to my desk top. I got an error message that was a error with about 10 images. I went back to that same project and now those images are blank with the upside down question mark? That says “Unsupported Image Format” Any help would be much appreciated!!
Thanks,
Jeff Skinner
Hello Jeff,
I don't undersand that with iphoto? The images are so old I forgot if they were originally iphotos or aperture files.
I saw the "iPhoto Original" keyword attached to one of the images in question. This keyword usually is set for an original master image, when you import from iPhoto.
I cannot find anything special about these imiages??? I noticed that there is no file size for the corrupted files.
If the image format is not supported, then probably Aperture cannot read the file size.
Not sure if the images are managed or referenced?
If these were imported from iPhoto, then they might have been imported as referenced, if you set the "Store Files" selector to "In their current location" on import. That would mean, that the original masters are still in your iPhoto Library, and if you edit them using iPhoto this may break the references to your masters in Aperture.
I think I just located the original imaiges in an old hard drive!
That is good, at least you still have a backup; but did you see the imported, unsupported images in the masters folder of your Aperture Library? It would really help to know the exact condition of the images that are problematic. Or are they not in the library? That would mean they are referenced, but then the exclamation-mark tag in the Browser is confusing - I then would expect an icon with a broken arrow.
It did not happen until I tried to export them though? What can I do to prevent this from happening futher?
Then Aperture probably did not notice that something was amiss with the images, until it needed to access the master image files for export and noticed that those could not be read. As long as you do not try to export or to edit the images, the Previews are sufficient, but on export the master has to be processed.
The master image files of the other images in the project may be problematic as well - make sure you have a working backup, before you try anything at all with other images in that project.
Cheers
Léonie
Similar Messages
-
Having trouble with image processor...help please!
HI there...First off I just bought a new iMac and haven't a clue what I'm doing so my problem could be related to that. While I'm waiting for Adobe to transfer over my platform I downloaded the trial of CS5 Extended to get me started. I'm having trouble with the image processor...I choose file/scripts/image processor...the dialog box comes up and I choose use open files and then try and choose the folder I want to save them in. I choose my folder and hit run and it keeps telling me specify folder destination. I can't for the life of me figure this out...what am I doing wrong? It always worked fine for me on my PC and CS3. I can't handle saving each image individually in the new folder...
Thanks!!I haven't renamed anything as far as I know. I made a new folder when I hit Folder option and it's highlighted as well as the path shows up in the processor box. Just when I choose run it tells me to specify a folder. The only thing I can think of is that maybe something messed up b/c I'm copied the files and folders over from my PC but it let me save as on the mac. Also the folder I'm choosing to put them in is on the Mac harddrive. IDK...
-
Help! I'm having trouble with images on my web page.
I'm trying to create a page with a bunch of my photos but I need the photos broken up into groups so I can discuss the different groups. So I simply cut and paste the photo area several times BUT now when I click on any picture in any group it only does a slideshow for the last group of photos.
I guess I could simply break the single page into multiple pages but that is so inconvenient in iWeb since it doesn't let you cut and paste template pages! Apple needs to seriously fix this shortcoming. How can you not allow cutting and pasting of pages??
Here's the page I'm having trouble with:
http://photo.braintransplants.com/Site/Astronomy.html
Thanks!
PowerBook G4 17 (A1085) 1.5 GHz / 1.5 GB RAM / 128 MB VRAM / 80 GB HD Mac OS X (10.4.2)You probably realise by now that you're attempting to do things with iWeb which it just wasn't intended to do. Cutting and pasting the photo grid area just won't work as you want it to. To work within iWeb's limitations might i suggest that you use the 'nesting' approach described in several posts here already. Use a single representative image on your main page for each of the situations you want to cover, and link each of these to an appropriate Photo page which has 'Include page in navigation menu' unchecked.
You could add a link on each of the Photo pages which returns to your main descriptive page. -
Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?
Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?
-
TS2518 Anyone else having trouble with plug-ins in Aperture 3.2.3?
I am having problems with Aperture 3.2.3 using my Nik plug-ins. I have updated everything from my iMac to Aperture to my plug-ins. I've done a repair permissions, restarted, and all that as well.
The problem is that when I edit a photo using my plug-ins, and hit save, instead of it normally rendering all the changes, the photo appears normal. If I have more than two edits, and I hold scroll all the way over (from first to last), it will show the edits to the last photo only, but only as long as I continue to hold the scroll arrow, once I let go, it returns to normal. Other times, when I edit a photo, hit save, it appears normal, but if I close Aperture, reopen it, the edits are there. Obviously, this is not very conducive to getting much done. I have Photoshop 12.0.4, but my plug-ins are specific to Aperture, and I actually prefer Aperture, but I've had minor stabilty issues with it from day one, and this is just really problematic.This is a known issue:
http://support.apple.com/kb/TS4237
We have to wait for Apple to fix.
Same issue here with NIK and PS CS5 (PS CS6 beta). -
Having trouble with Imaging with an Answer File
I would like to create an image for Multiple machines; however, I am not sure if I should install the drivers for all machines on one machine and then use the Microsoft-Windows-Pnp Sysprep_Neutral switch in my answer file to keep all drivers that are already
installed on the system and not clean up drivers for devices not present.
Can someone assist me with figuring this out?
Also, trying to get device drivers from other computer to move them to one central computer without having to install one by one. Was going to try moving the .sys and .inf from the drivers folders from the multiple systems and hope that window 7 can give
each system what it needs.
Thanks
APIf you have already captured your image as a wim, you can use DISM (which is part of the WAIK) to inject the drivers into the wim. Here is a link that should walk you through the process. (FYI, run it as an administrator)
http://technet.microsoft.com/en-us/library/dd799258%28v=ws.10%29
The command is: Dism /image:[WIM FILE PATH] /Add-Driver /driver:[DRIVER STORE] /recurse
Recurse should scan all the folders in inject all the drivers it finds, sometimes you have to add /ForceUnsigned to some drivers, but those are few and far between. You should check the DISM log in %windir%\logs\dism.log for any errors you encounter
and just look for the timestamp as it's your best bet to finding the errors. I used to support 20+ models of printers and 11 or 12 different models of Dell PCs and laptops, and regularly injected about 1000 drivers for all of them.
Needless to say, driver injection is VERY useful!
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
After having the issue with my photos being blocked on Facebook, I was told I needed to upgrade to the newest version of Firefox and that the version I am currently using (3.6.3) is no longer supported with security updates. I have tried to follow the steps in the upgrade process through Firefox itself, but have been unable to do it...I would love step by step instructions to walk me through it as I don't know what I am doing wrong.'''bold text'''
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
Having trouble with Image Capture
I used to be able to scan multiple photos at the same time and have it detect separate items. Now, ever since upgrading to Lion, it retains the image outline as dotted lines when I add new photos. It then scans the new images and also the areas where the old images were. How can I get this to stop?
http://www.ricoh-usa.com/downloads/popup/popup_manuals_drivers_download.aspx?pat h=http%3a%2f%2fsupport.ricoh.com%2fbb%2fhtml%2fdr_ut_e%2frc2%2fmodel%2fspc242s%2 fspc242sen.htm
reveals this:
Mac OS X 10.9 (OS X Mavericks)
Description
Version
Update
File size
Download
PPD Installer
Ver.2.01
12/24/2012
55 KB
ColorSync files
New!
Ver.1.0.0
02/20/2014
61 KB
Twain Driver
Ver.2.03
12/24/2012
5,267 KB
The TWAIN driver is the scanner driver. Combined with Apple's Ricoh download, it should work. Otherwise you need to contact Ricoh and ask why it isn't. -
I purchased a template and are having trouble with images in preview
When I edit .gif or .jpg they view correctly in Dreamweaver but when I preview the page in I.E. it can't find the images. If I open the page in Firefox it works fine. I'm new to Dreamweaver but I've worked with FrontPage and Expressions. I'm puzzled.
Did you define your local site folder in DW before you started this project? Without this critical 1st step, DW cannot properly manage site assets for you.
Go to Site > Manage Sites or New site. Tell DW where your site files are located on your hard drive.
Under Advanced Settings > Local Info, set your Default Images folder and use Links relative to document.
Hit Save.
Nancy O. -
Having trouble with images looking blurry
Please Help!
When I save two images in photoshop (save for web, maximum jpg) they both look great on my macbook pro. However, when I upload them to my godaddy ftp, and view on my IPAD, one looks fine and the other looks blurry. They are both the exact same width, how can one look sharp and normal....and the other one look blurry???
NOTE: After ive uploaded to the ftp, when i view on my macbook pro, they are both fine, but when i view on my IPAD, one is fine and the other is blury.
www.tellysplace.com/womensbottoms.jpg (the blurry one)
www.tellysplace.com/womensblouses.jpg (this one looks fine)
Please help!!!
Thank you,
JordanI am not seeing anything blurry with the first link. My guess is the height is different and your ipad is scaling it. But if your css is set to pixels it shouldn't.
-
I Have the latest desktop computer and having trouble with image capture recognising scanner
Has anybody got any ideas on how to get my computer to recognise my scanner
http://www.ricoh-usa.com/downloads/popup/popup_manuals_drivers_download.aspx?pat h=http%3a%2f%2fsupport.ricoh.com%2fbb%2fhtml%2fdr_ut_e%2frc2%2fmodel%2fspc242s%2 fspc242sen.htm
reveals this:
Mac OS X 10.9 (OS X Mavericks)
Description
Version
Update
File size
Download
PPD Installer
Ver.2.01
12/24/2012
55 KB
ColorSync files
New!
Ver.1.0.0
02/20/2014
61 KB
Twain Driver
Ver.2.03
12/24/2012
5,267 KB
The TWAIN driver is the scanner driver. Combined with Apple's Ricoh download, it should work. Otherwise you need to contact Ricoh and ask why it isn't. -
Having Trouble With Image Preloads
Can somebody please tell me what I'm doing wrong?
Check out my homepage -
http://www.huppbrian.us
The links on there are all supposed to rollover, and they
do... kinda.
Hold your mouse over one of them, and you'll see the
appropriate rollover behavior... eventually.
Yes, I did check the "preload images" box for them all (only
the buttons and scroll jpg).
Funny thing is that if you click on one of the links, and
then click the back button, the rollovers on the home page then
work fine.
Any ideas???I haven't renamed anything as far as I know. I made a new folder when I hit Folder option and it's highlighted as well as the path shows up in the processor box. Just when I choose run it tells me to specify a folder. The only thing I can think of is that maybe something messed up b/c I'm copied the files and folders over from my PC but it let me save as on the mac. Also the folder I'm choosing to put them in is on the Mac harddrive. IDK...
-
I am having trouble with my links/websites having images attached to them. The place where the image should be is blank. For example, AARP has an A for its image. My storage website has a blank broken box where the image should be. I forgot I had trouble and had to reset Foxfire, this problem occurred after that reset.
cor-el,
Mixed content normally gives the world globe image, unless you are using a theme that uses a broken padlock instead. Maybe the gray triangle means invalid? I came across that in a few themes (what is invalid was not made clear), but those were not using triangle shapes to indicate that.
I came across that mention in one of the pages you posted:
* https://support.mozilla.org/kb/Site+Identity+Button
I cannot attach a screenshot because I have not seen a triangle of any kind in my address bar. -
I'm having trouble with my Apple ID. I changed my email account, and recently (a month ago) and since I switched is requested every time I open any app to Apple ID password to the old email. How can I solve this? Could it be that my iPhone 4S is in sync with my Ipod???
If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPhone. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.
-
I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.
Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin
Maybe you are looking for
-
Error when opening an RFC connection (LB : Hostname or service of the messa
Hi All, Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system. These transports w
-
How to disable the custom button on alv?
Hi All, i created a ALV Report .I created a Custom Button on ALV.Based on the input value i need to enable/disable that Button. How can i achieve?And what are the methods i need to code? Regards Ravi
-
Need to set background color of AdvandedDataGrid Rows !... (Almost there !)
I made a subclass to implement drawRowBackground but i can't get an instance of the data assigned to the particular row... I just need to know how to use the hierarchicalData dataProvider class to do this. (Data comes from an XMLList structure.)
-
Hi How to attach a PDF to my view using file upload UI element and how to save.iam using ECC 6.0 as backend. Thanks Rahul Edited by: rahul raao on Feb 24, 2009 7:12 AM Edited by: rahul raao on Feb 24, 2009 8:06 AM
-
Newbie Question: Adding New Recto Page?
When I imported my novel from MS Word file, I placed it starting on page one of the InDesign document. I just noticed that, at least as seen in the InDesign window, page one appears to be a verso (left-hand page) rather than a recto (right-hand page)