HCM Process and Forms - Create and End record using the same form scenario

Hi All,
I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
How would this be possible?
Thanks,
J

You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it. Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
Cheers
Ian

Similar Messages

TS1702 i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

HT1535 I own an iPhone4, an iPod 3rd generation and an iPad 2. I use the same iTunes library but unfortunately synced iPad with a different computer before syncing to my own. Do I risk losing the films/apps I've downloaded onto my iPad if I sync with my i

I don't want to sync what is on my iPod to my iPad. (I have a 32gb iPod but only 16gb on iPad. The iPod I use mostly for music.) I can't seem to add the films I have downloaded onto iPad to iTunes. If I could do that, I could erase them from iPad to create more storage.
This is intensely confusing, sorry.

Question.....
"I own an iPhone4, an iPod 3rd generation and an iPad 2. I use the same iTunes library but unfortunately synced iPad with a different computer before syncing to my own. Do I risk losing the films/apps I've downloaded onto my iPad if I sync with my iPod?"
Answer.....
Yes you will lose the films that you downloaded to the iPad when you sync with your own iTunes unless you transfer the purchases into your own iTunes library. Were these movies that you purchased? If so, you might be able to download them again for free. Do you have multiple computers that you sync from or is this someone else's purchased content?
You can select whatever you want to sync to all of your devices in iTunes, you do not have to sync the same content to all device.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
iOS: Syncing with iTunes - Support - Apple

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

On your iPhone, try toggling Find My iPhone off, then back on after a few seconds.

Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

Tomquer
If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
That will leave you with the purchased activated serial number on two of your computers.
Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
Lots of scenarios beyond.
1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
Then do nothing, leave the program in the deactivated/installed state.
2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
Any questions or need clarification, please let us know.
Thanks.
ATR

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

Use the same form with different button turned on in different calls

Can I use the same form with different buttons turned on in different calls?
Thanks!

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

How can i transfer one song off one iphone and put it on another iphone using the same itunes

hi, me and my mum use the same itunes, my iphone and her iphone. they are both authorised. i bought a song on my phone, and my mum wants it too but itunes wont let me transfer it off my phone onto hers. what can i do

Open itunes, connect iphone, click File>Transfer Purchases
Then sycn the song to your moms iphone from the computer

I need to install cc on two macs. My Macbook Pro and my Imac. Can I use the same account?

I have two machines I use. One primarily for photography on the move and another for mostly Indesign work. Question is can I use the same account on both as it will never be simultaneous.
Derek

Yes.
Mylenium

How do I create a new website using the same format as my last one?

I created a site last year and now I want to use the same templates for blog, photos, albums, etc. as last year's. In other words, I'm looking for a "save as" where I can add new content but not have to re-format everything. Thanks for helping.

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

Creating multiple tab reports using the same query in Web intelligence

Hi All,
I have created a Universe on a BW Query which has fields as below
AGE Depaatment Gender Grade
25       FIN                M            A
27       LES               F            A+
60       SWS            M             A++
Based on this data i have created a WEbi report which shows all of these data under one tab.
Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
Similarly i create two more new report tabs.
in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
2nd report contains only finance data, third contains only Les data and fourth only SWs Data.
Is it possible to create this report using the same query?
Regards,
Raj.

You should use report filters, not query filters.
A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
This is a fairly confusing bit for folks that are new to Web Intelligence.

Header and Child needed - but underlying records are the same.

Hi people,
I am trying to figure out how to do this particular sort of problem. I have given the create and the insert scripts for creating the sample data for the same.
1. I have 3 records as given below. This is just sample data but based on something that I am trying
create table t
(id number,
sub_id number,
Name varchar2(50),
Desciption varchar2(100),
val number
SQL> insert into t values (1,1,'Test First', 'Test First Description', 10);
1 row created.
SQL> insert into t values (1,1,'Test First', 'Test First Description', 9);
1 row created.
SQL> insert into t values (1,1,'Test First', 'Test First Description', 15);
1 row created.
SQL> select * from t;
        ID     SUB_ID NAME                 DESCIPTION                       VAL
         1          1 Test First           Test First Description            10
         1          1 Test First           Test First Description             9
         1          1 Test First           Test First Description            15
2. I need to create an output, that looks like this
Output
Hdr          Test First           Test First Description
Chd          10
Hdr          Test First           Test First Description
Chd          9
Hdr          Test First           Test First Description
Chd          15Now maybe the logic is very simple, but I have been trying for a couple of hours now and have not been able to put my finger on it.
Would appreciate if any of you could help.
Regards,
K

SQL> drop table test;
Tabel is verwijderd.
SQL> create table test(id number,sub_id number,Name varchar2(50),Desciption varchar2(100),val number
Tabel is aangemaakt.
SQL>
SQL> insert into test values (1,1,'Test First', 'Test 10 First Description', 10);
1 rij is aangemaakt.
SQL>
SQL> insert into test values (1,1,'Test First', 'Test 9 First Description', 9);
1 rij is aangemaakt.
SQL>
SQL> insert into test values (1,1,'Test First', 'Test 15 First Description', 15);
1 rij is aangemaakt.
SQL>
SQL> with x
2 as
3 (select name, desciption, val, row_number() over (order by id, sub_id, val) rn
4    from test
5 )
6 select indicator, name, desciption
7    from (
8 select 'Hdr' indicator, name, desciption, rn
9    from x
10 union all
11 select 'Chd', to_char (val), null, rn
12    from x
13    )
14 order by rn, indicator desc
15 ;
IND NAME                                               DESCIPTION
Hdr Test First                                         Test 9 First Description
Chd 9
Hdr Test First                                         Test 10 First Description
Chd 10
Hdr Test First                                         Test 15 First Description
Chd 15
6 rijen zijn geselecteerd.
SQL>

When I fill fields on a form and ask to print using form fields only, the infomation doesn't show up. Other people in the office use the same form with no problem. Using XI standard.

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the information I filled shows up or prints. No one else in the office has this problem. Does anyone know why I can't do this, but other people can?

HCM Process and Forms - Create and End record using the same form scenario

Similar Messages

Maybe you are looking for