HCM Processes and Forms: Work Item is not opening

Hi,
We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
1) In MSS Work Book, while launching, we are getting message -
Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
Detail configuration steps are shown as below -
Workflow Task used in configurations -
1) Entries in IBO_C_WF_TA_P_SC (Assign Task ID’s to POWL Types)
2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
5) IBO_C_WF_TAC (Specify Default Action)
Error -
1) MSS -
2)HR Admin -

Hi Guru,
Any input..its urgent!.
Regards,
Vijay

Similar Messages

Workflow could not start in HCM process and Forms

Hi All
It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
Appreciate any help.
Thanks
Umang

Hi Swati
One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
http://scn.sap.com/message/14848795#14848795
Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
Just some high level checks (if not done already):
Check event linkage errors in SWEQADM if anything is related to your WF
Check in SWEL if it's showing any more details (not sure if it will)
Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
Any error sin binding
regards,
Modak

Use HCM processes and Forms without using the Enterprise Portal

is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
Saurabh

Hi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

HCM Process and Forms - Authorization issue

Hi Experts,
I have to developed one HCM process and forms for leave request. Workflow is assigned to the form. When I test the Process with in the R/3 using Txn 'HRASR_TEST_PROCESS' I got the Error, Work Item Not Found; Workflow Not Started" and "Process Object Not Created".
Then I tested the same Process with the user who is having SAP_ALL role and now the workflow is triggered and can able to see the work item in the portal UWL. With SAP_ALL everything was fine.
But my client will not give SAP_ALL role to all users. So I need to find, what are the roles and authorization objects need to execute the HCM process and forms.
I checked the Help documentation, and I found P_ASRCONT is needed for HCM forms and process. So I assigned to the user but still, the forms getting error.
Thanks,
Helps will be highly appreciated.

Thanks for your reply.
Transactions su53,st01 and st05 didn't help.
Any tables or specific transaction for HCM process and forms will be helpful.
Thanks.

Workflow issue in HCM Process and Forms

Hi,
I have created one workflow for HCM Process and form ( Termination) . In that workflow, there are Two levels. First and second level is approved by the respective managers. I am using the Standard TASK TS17900100 both levels having the Send, "BACK TO AUTHOR" option.
When I initiate the form it has generated the process reference number, it went to first level approval and the respective manger received work item in his UWL inbox in this stage I have checked in backend (PA20) infotypes( 0 & 1) are updating automatically and employee has been terminated without approval of work item.
I have checked in workflow log the work item has with first level manger only.
any one please help me on this.
Regards,
Srujan

Hi,
TS17900101 uses --> CL_HRASR00_WF_COMPONENTS / Method WI_EXECUTION_VIA_R3_INBOX.
In the text of the method you can read the following:
It is only allowed to trigger a WI via UWL which does not execute
that method which was customized at the corresponding task (so this
method). To ensure this if the WI was startet via R3 Inbox then
exactly this method is called to present an error.
So, are you approving from UWL or SBWP?
Regards,

Regarding HCM Process and forms Workflow

Hello all,
I am working in HCM process and forms workflow. In that workflow, there are three levels. First and second level is approved by the respective managers. I am using the Standard TASK TS17900100 in the 3rd level. In which the final level has Send, withdraw, "BACK TO AUTHOR" option. When I click on Send button the PROCSTATE (workflow container element) status getting changed to Processed and the workflow getting Completed.
But when I click on "BACK TO AUTHOR" button the PROCSTATE status is not getting changed from "APPROVED" to "BACK"?
Any clue on this what could be error ?
Thanks & Regards,
Krishnan

Friends,
In the Workflow ,there is the binding for "Processor Role" between Workflow Container and Task Container. I removed this binding as it is not required. Now on click of "Back to Author" in the final stage the work item is moving to Inititor.
Thanks & Regards,
Krishnan

Worklow in HCM process and Forms

Hi Gurus,
We have recently upgraded from HR SP level 14 to level 24. After the HRSP upgrade, we find that the workflows used in the HCM process and forms which were working fine earlier are not working now.
To trigger the workflow, I am using the class CL_HRASR00_WF_PROCESS_OBJECT and event TRIGGERED. First, we faced the problem in the standard task TS17900110,which imports the values from form to workflow container.After Implementing the SAP notes suggested by SAP,the workflow got triggered and the values got imported and it is working fine now.
Now we are facing the problem in the 2nd level,where the manager trying to 'Approve or Reject'.The information message is thrown in backend HRASR_DT as, "Work Item not found; check workflow Log".
Standard Task used in the 2nd level TS17900101 to approve/reject.
Can anyone suggest how to proceed on this issue ?
Regards,
Paramasivan Krishnan

Hi Paramasivan Krishnan,
First, welcome you to SCN forum. However, I am afraid you posted on a wrong forum. Here is dedicate to SAP Business One. Not related to HCM.
Thanks,
Gordon

Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

Hi All,
I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
*METHOD constructor.
DATA:
    badi_context          TYPE REF TO lcl_badi_context.
CALL METHOD super->constructor
    EXPORTING
      form_scenario         = form_scenario
      form_scenario_service = form_scenario_service.
DATA:
    t5asrfscnsrv_wa TYPE t5asrfscnsrv.
SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
ASSERT sy-subrc EQ 0.
ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
fill_table_metadata( ).*
i followed this link also..its not working for me..
[Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
Regards,
Parthi

Hello Parthasarathi,
Please, try to implement the note 1075650.

Error in MSS HCM Processes and Forms Overview

Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
Devendra

Dear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
   What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
    The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_ABAP_TSTMP=================CP' has to be
    terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
     caught in
    procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra

Error while Accessing the HCM process and forms

Hi All,
We have implemented HCm process and forms. Everything was working fine earlier but for past few days we are facing an issue after selecting an employee and clicks on the select process we are getting the following error. Kindly povide the solution.
The following error text was processed in the system GOA : Component Usage OADP_USAGE Does Not Have an Active Component
The error occurred on the application server sapgoa_GOA_37 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ENSURE_ACTIVE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Method: GET_INTF_CONTROLLER_INTERNAL of program CL_WDR_COMPONENT_USAGE========CP
Method: IFWDR_INTERNAL_API~GET_INTERFACE_CTLR_DELEGATE of program SAPLWDR_RG_PROXY_FACTORY
Thanks & Regards,
Sreelatha Gullapalli.

Hi,
In EhP4, the employee search is created using OADP framework . And if the relevant configuration is not maintained , I mean there is a view cluster where the applications (PA/PD) and relevant object types are maintained.
If this is not maintained, this creates a error. Please check .
Hope this helps.
Best Regards
Saujanya

Dynamic navigation, on HCM Process and Forms "Web Dynpro FORM"

Hi,
I'm trying to solve an issue regarding dynamic navigation, on a enhacement done at the Web Dynpro ABAP QISR_UI component for HCM Process and Forms.
I'm hiding the Adobe Form, and doing "do_dynamic_navigation" for a dynamic generated view container present at the VIEWSHOWFORM on the QISR_UI component.
The code works great, i.e.: the Adobe Form remains hidden and the custom form, using Web Dynpro appears.
I'm also using the HRASR00_PROCESS_EXECUTE_1 component to execute a Portal IView (Floorplan based component).
When the process is started, and the folowing actions are executed:
1- Select Employee
2- Select Process
3- Edit form
4- Press back (for example if the wrong process is selected)
5- Select the Process
6- Edit form again
There is a NULL exception, the "embedding_vca" (below) is NULL
SAPLWDR_RUNTIME_REPOSITORY
METHOD: IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT (LCL_VIEW_USA
* method IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT
method if_wd_rr_view_usage~get_emb_view_cnt_assignment.
result = me->view_usage->embedding_vca->get_api( ).
endmethod.
"IF_WD_RR_VIEW_USAGE~GET_VIEW_CONTAINER_ASSIGNMENT
Can you guys give me an hand?
Regards

Hello,
Basically what I did was replacing the Adobe Form, by a Web Dynpro component that contains its own form, and associated logic.
Tecnically the steps to acomplish the task were:
1º Development of a component for showing a form. ( I suggest you to start with just a "hello world" or something very basic )
2º Enhance the QISR_UI component (VIEWSHOWFORM view, on the modify view method), something like
if form scenario = XXXXX then
hide the adobe form;
create a custom view container (the problem I had above), and create an instance of the component created on step 1
end if
3º Access the context that the original form returns (you can check the context debugging the VIEWSHORFORM view )
4º Pass the context to the component created..
I can't provide further details on this, I'm sorry...
I do not suggest doing this, this was a requirement so I had to do it... But this requires a lot of workarrounds, and lots of small changes in standard code related with process and forms... It's not, also, a "clean" solution
Regards,
Joã

Adobe HCM Processes and Forms Start processes iView error

Hi,
We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
    at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
    at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
    ... 40 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
J2EE Engine 7.00 patchlevel 109044.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Session & Other
Session Locale en
Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
     ... 31 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
     at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
     at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
     at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
     ... 38 more
Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
Any help will be appreciated and rewarded accordingly.
Regards,
Thomas

hello,
how did you solve it ?
Regards,
Dimitry Haritonov

Generic service to populate fields in HCM Processes and Forms

Dear Friends,
I am developing generic service to populate some fields in HCM Processes and Forms. Please let me know whether i need to develop a single service for each field in the form or is better to write one generic service for all the form fields.
Thanks in Advance

Hi Sapient,
By right, generic service means to be generic so that it can be re-used in any HCM forms thats needed the field/validation from the generic service.
Unfortunately in real situation, generic service are not reusable for some reasons:
- for the same field same field might have different validation in different form.
- there is dependency, example, to read special field
The key thing here is all about the design and planing before development. Whereby if you have all the info and requirement HCM form to be implemented(which you wont get it for most of the cases), and you have the overall view of all HCM to be implemented and you are able to plan ahead before coding, then you can design the generic service for each/related field.
If it is not the case, i would encourage to use 1 generic service for all the field in the HCM form. It would ease the team during support/maintenance phrase as well. For sample, please refer to HRMSSRCF_REQUISITION_ADVANCED for Create Requisition form.
This is my humble opinion based on my experience working on HCM forms. Please do comments and discuss.
regards,
Xiang Li

Mass termination in HCM Processes and Forms

Hi everyone,
Is mass termination possible within the HCM Processes and Forms framework? Usually the framework is per employee. Has anyone got it working for mass employees or org units?
I'm leaning more on Web Dynpro development for the mass terminations.
Thanks!

Hi Chris,
Can you please give me more details on how to set up the Mass termination process in HCM. I try to built LSMW through PA40, but it did not work out. Can you give me more details on what are steps for the configuation. IF the process includes any ABAP requirement, please let me know, I have to talk to my ABAPer.
Thank you in advance
Regards
Chinna
Message was edited by: Chinna Gogineni

HCM Processes and Forms: Work Item is not opening

Similar Messages

Maybe you are looking for