Hd 7790 2gb radeon on Vista - disaster

My machine vista 32 bit home
Previous card palit geforce 8400 gs
550w psu
4 gig ram
I installed the card and driver and initially it worked. After 30 minutes while running game developers software and game my computer blue screened bsod for the first time ever.
Now when vista starts it has put itself into a go slow and what looks like power saving mode.
Have now removed 7790 and can't get vista out of its malaise. I have tried to restore to point but it isn't working.
I have also tried a vista restore from dvd or cd but it loads the black screen with words please wait and then does nothing.
The company who sold me the card have said I can return it but - my main computer is now very almost dead because as far as I can tell the driver for this 7790 card when used on Vista Home 32 bit have killed my computer.
If someone can help me get vista back and working that is most important at this point. Second to this is why driver 8.00.0911 doesn't work on Vista are there any responses that will help me to install it before I return it tomorrow?
Thanks for any replies.

Which model exactly?
Also again: read >>Posting Guide<< and provide full system specifications.

Similar Messages

  • MSi HD 7790 2GB restart/reboot issues

    Hi, new member here.
    I'm at my wits end with this one, so if anybody can help much appreciated.
    Had this card only several days and all was fine. But now when I have to restart the computer, the monitor stays on stand-by and the pc freezes with no beep, until I press the reset button on the tower. After that it boots absolutely fine and loads into windows. In windows itself, the card runs fine, rock solid stable and great performance.
    I've tried changing the different dvi ports on back of the card, but still the same.
    Specs:-
    AMD Phenom II X4 955
    Biostar TA970 Motherboard latest BIOS
    8GB Corsair Vengence DDR3-1333MHz RAM
    MSi HD 7790 2GB VRAM (Catalyst 13.9 WHQL)
    OCZ ZT Series 650W PSU
    Windows 7 SP1 x64
    Everything stock clock speeds and voltages.

    Hello,
    Having the same issue with similar hardware.  PC will boot cold and shutdown like it should but restarting most of the time causes the system to hang with no video but the fans run and MB LED's are still lit.  Pressing the reset causes the video to restore and POST and a normal boot.  I tried an old video card to eliminate a video card problem but it does the same thing.  Here is the hardware I'm running, I just built it today.
    MSI 970A-G45
    AMD Phenom II x4 955 BE (not OC)
    MSI AMD Radeon 6770 1GB DDR5 (Not OC)
    Kingston  HyperX Blue 4GB DDR3 PN:KHX1333C9D3B1/4G
    LiteON 24x DVDRW (SATA)
    WD Caviar Blue 6.0GB/S 250GB HDD
    Cooler Master Extreme Power plus 500W PSU
    I would post CPU-Z stats but I cant figure out how to attach images. help?
    Areamike,
    To adjust the command rate you have to go into the overclock tab and go into advanced DRAM config.  If I can remember right you may have to adjust another setting away from AUTO to be able to access this menu.  (i would be able to tell you for sure but I cant look at BIOS and be on the forum typing at the same time.lol)  After having this problem I read a lot of reviews with people having trouble with this board, hopefully its just a setup problem for us.
    -RickyB

  • High Temperature on iMac 27" 3.4Ghz 4GB RAM 2GB RADEON CARD....

    Im a little worried, a lot actually, all im doing is browsing the forums, installed flash and and a few updates and thats it, temps are:
    HD =126F
    CPU =110F
    AMB =76F
    GPU DIODE =171F
    GPU HS =162F
    MEM CONT. =124F
    OPT DRIVE =122F
    POWER SUPPLY 2 =137F
    OPT DRI =1150 RPM
    HARD DRIVE =1099 RPM
    CPU FAN =939RPM
    Havent even started WoW yet!
    Please help/advise, is this bad, normal or even good(good - i doubt).
    Thanks

    Apple doesn't publish maximum temps however there are safeguards built into the machine, if it senses it's going to overheat it will warn you and then shut down if you ignore the warning. It's VERY rare this ever occurs.

  • Lenovo 3000 N200 0769 ERG upgrade memory 1GB- 3GB only recognize 2GB

    I bought a Lenovo 3000 N200 0769 ERG with 1GB installed in first slot.
    To get the system better work I wanted to expand the RAM.
    As the spec's tell a maximum of 3GB should be possible.
    Thefore I added a 2GB mem-card.
    I expected to see the I would have in total 3GB in use.
    Now the system and BIOS tells that only 2GB is in use.
    I already checked:
    - startup with only 1GB works correct.
    - by adding the 2GB card the total value increased from 1 to 2 GB so the card is expected to be correct
       + systems works correct
    - only using the 2GB card gives problems, system doesnot recognize RAM at all.
    On this forum I see some suggestions to place 2 x 2GB cards and Vista only recognizes 3GB.
    Is someone aware that this may be a solution?
    Does someone else have an other solution.
    Your help is very welcom. 
    Thanks in advance.

    Wow, thank you, what an awesome little tool!
    So, I found that these 2 RAM products are compatible with my laptop:
    Part Number: CT758799
    Module Size: 2GB
    Package: 200-pin SODIMM
    Feature: DDR2 PC2-6400
    Specs: DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64 •
    Part Number: CT699699
    Module Size: 2GB
    Package: 200-pin SODIMM
    Feature: DDR2 PC2-5300
    Specs: DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64 •
    I then went to a well-known auction site and found RAM cards from the same manufacturer with exactly the same specs as above but with different Part numbers. Does it have to be the exact part number or do I stand a good chance of it working if it has the required spec? I searched for the exact part numbers and yielded 0 results.
    Thanks for all your help on this.

  • ITunes + Windows Vista + Games = Unsatisfactory playback experience

    My system details:
    Core 2 Duo E6600
    2GB RAM
    Windows Vista Ultimate w/ latest updates
    iTunes 7.5.0.20
    NVIDIA 7950GT video card w/ 512MB memory
    Creative X-Fi Fatal1ty Soundcard w/ latest drivers
    10k RPM SATA drive for OS
    10k RPM SATA drives for data (where music resides)
    You'd think this would be enough to play music on iTunes without skipping. You would be wrong.
    With only Firefox & iTunes running, it still manages to skip/crackle on playback when loading webpages/tabs.
    What gives?
    Only iTunes does this, other applications manage playing 128kbit without any problems. E.g. WinAmp, Windows Media Player.
    Doesn't happen in Mac OS X on my iTunes there, so clearly there are still "issues" with playback on Windows.

    Numerous people have reported problems playing iTunes videos on Vista if the videos are stored on SATA disk drives.
    From what I can tell looking at HP's website, almost all new HP systems include SATA disks. If you don't know whether your system has SATA disks, tell us the exact model number and we can probably figure it out.
    If you do have the iTunes videos on SATA disks problem, there is currently no known solution.

  • Vista 64 bit install error

    I read somewhere that if you have 8gb of ram on the K9A2 Platinum mobo, {I have 4 2 gb sticks}, that you need to reduce the ram to say 2gb to install Vista 64. I ran into this and had to reduce my Ram for a successful install. Does anyone know the MS knowledge base article number or a link for further info on this? I'd like to research it further. I'm using the 9850BE processor and Geil 2gb sticks of ram. Thanks.

    You mean this patch?
    http://support.microsoft.com/?scid=kb%3Ben-us%3B929777&x=7&y=13

  • CS3 Web Premium Suite compatible with Vista 64 bit?

    Greeting folks. I realize this is not a Photoshop specific question, but does anyone use CS3 Web Premium Suite on Vista 64? If so, do you have any problems with any of the programs?
    I'm contemplating upgrading from Vista 32 to Vista 64.
    Thanks!

    I just got the Adobe Master Collection CS3 to run on a Dell Workstation (quad core processor, 2GB RAM) with Vista 64 Business. Photoshop is deathly slow, to the point of being unusable. It takes up to 2 minutes just to load the programme. Clicking menu items or drop-down buttons produces no response for about 5 secs. I created a blank layer and tried to draw a simply brush stroke across it - again, a 5 sec delay before the stroke appeared. This makes it impossible to do any useful work. Other parts of the package are better (e.g. Dreamweaver, Illustrator) but Bridge is slow and I have a subjective impression that some of my none Adobe programme are now running more slowly. I did look at CPU and memory utilization - never got about 60% and was mostly around 10%.
    When I run the Photoshop CS3 trial on an AMD duo core computer with only 1GB RAM (which is running XP Pro), I get a much snappier response. Makes me suspect a Vista issue.
    Since others appear to be having much better success, I would be very interested in any tips, etc. which I might try.
    Thanks.

  • Crysis FPS: Windows Vista 64-Bit.

    With my current system spec...
    Resolution at 1680x1050, all settings at very high, vsync on, no AA, Crysis version 1.1, I'm getting about 19FPS.
    Resolution at 1680x1050, all settings at very high, vsync on, 16x AA, Crysis version 1.1, I'm getting about 19FPS. This setting takes a very long time to load. After pressing any key, all I get is a black screen. I had to Ctrl + Alt + Delete.
    I the third settings I tried was with everything on high, vsync on, no AA. And I'm also getting 19FPS. Weird, the only changes is with everything set to one less and still getting the same average FPS.
    When playing, to see the FPS, press the ~ key and then type: r_DisplayInfo = 1
    Type this to turn it off: r_DisplayInfo = 0
    Anyone else? yes, this is the 8800 GT that comes with my mac
    I'm guessing we won't be seeing a system that can run with all settings maximum, including AA until at least 2010, at full 60FPS+
    Message was edited by: Supreme Virtue

    Hi all,
    just FYI: The german computer magazine c't has tested ATI/AMD and NVIDIA cards on a normal PC based computer (Intel C2D 6700 with 2.66GHz and 2GB RAM and Vista).
    Test cards were based on the ATI/AMD 3850/3870 + 2900 and the NVIDIAs were 880GT - 8800GTX.
    Bottom line with the test was:
    Crysis with DX9 1280x1024 noAA mid settings: all cards between 40-50 fps.
    Crysis with DX9 1280x1024 noAA high settings: all cards between 20-30 fps.
    Crysis with DX10 1280x1024 very high settings: all cards between 10-18 fps.
    (they used the Crysis internal CPU-test for this).
    The c't concluded, that for the DX10 very high settings in Crysis only future graphic card releases with maybe two or more GPUs on them might be capable to get decent fps-rates.
    Sorry, no online link for the results. They were only published on paper.
    Stefan

  • I just instaled firefox 4 on my Acer netbook with Windows Vista Basic. Now the typing is very slow, ie. cannot keep up with my typing speed, which is not fast. Any ideas?

    I have an Acer netbook, with 2GB ram and Vista Basic. I installed firefox 4 and now the machine cannot keep up with my typing. The letters are delayed appearing on the screen in all apps, but especially in email, and words just get lost if I type too fast, and I am not a fast typist. Should I remove firefox 4?

    Have you tried updating your software? The issue with the keys will either be a software issue or an issue with your hardware, if you're on the newest software try re-installing it. It's very simple to do using the desktop software, if this does not work it seems to be a hardware issue, meaning repair or replacement is needed.
    Also, updating/re-installing your software should also resolve any slow/freezing issues and hopefully stop your dialling problem.
    Hope this helps
    Adam
    EE Blackberry Specialist

  • Compatibility HD 7790 B75MA-P45

    Hi guys, i need help. I got this motherboard: cz.msi.com/product/mb/B75MA-P45 .html and i buy this graphic card: cz.msi.com/product/vga/R7790-2GD5-OC .html. Before this card i have ATI SAPPHIRE HD 2600XT and my computer works perfectly. Now I installed new graphic card, installed drivers from CD and here my problems started. I get BlueScreens PAGE_FAULT_IN_NONPAGED_AREA randomly. Is it that graphic card is not compatible with my motherboard? I runned HD Tune PRO my HDD is clear any MemTest86+ doesn´t show nothing (4GB Kingston HyperX DDR3 1600Mhz). I got Windows 7 Home Edition 64bit and nothing overclocked. What´s wrong?

    Board: B75MA-P45
    Bios: Version 1.8
    VGA:   MSI R7790-2GD5/OC
    PSU:   Corsair CX500 (500W, 80 Plus Bronze, ATX2.2, aktívne PFC, SATA, 120mm)
    Intel Core i5-3350P Ivy Bridge 3.1GHz (3.3GHz Turbo Boost) LGA 1155 69W
    MEM: Kingston 4GB DDR3 1600MHz CL9 HyperX blu Edition
    HDD: Western Digital Blue 1000GB 64MB cache
    COOLER: Intel Box Fan
    OC: Nothing
    OS: Windows 7 64bit Home Premium
    Have ATI SAPPHIRE HD 2600XT before, no problems, now installed AMD HD 7790 2GB OC and have blue screens PAGE_FAULT_IN_NONPAGED_AREA.
    Reinstall my Windows, installed new drivers from amd.com, download newest drivers for motherboard from msi.com, installed new BIOS v1.8.
    Checked HDD with HDD Tune PRO, no errors, RAM module checked with MemTest86+ and no errors.
    WhoCrashed show me that BlueScreens was beause of Avast! driver fault, uninstalled it and blue screen show aggain and show this:
    System Information (local)
    computer name: IQON-PC
    windows version: Windows 7 , 6.1, build: 7600
    windows dir: C:\Windows
    CPU: GenuineIntel Intel(R) Core(TM) i5-3350P CPU @ 3.10GHz Intel586, level: 6
    4 logical processors, active mask: 15
    RAM: 4226740224 total
    VM: 2147352576, free: 1996439552
    Crash Dump Analysis
    Crash dump directory: C:\Windows\Minidump
    Crash dumps are enabled on your computer.
    On Sun 13. 10. 2013 13:00:59 GMT your computer crashed
    crash dump file: C:\Windows\Minidump\101313-15475-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x50 (0xFFFFF8A0083F6000, 0x0, 0xFFFFF80003146079, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sun 13. 10. 2013 13:00:59 GMT your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
    Bugcheck code: 0x50 (0xFFFFF8A0083F6000, 0x0, 0xFFFFF80003146079, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    It´s because of compatibility of graphic card with my motherboard or some other problem?
    Now i tried this:
    Shot in the dark here:
    1) Open Start, right-click My Computer, and then click Properties.
    2) Click the Advanced tab.
    3) Under Performance, click Settings.
    4) Click the Advanced tab.
    5) Under Virtual Memory, click Change.
    6) Click No paging file. Click OK, ok, ok and make sure to apply.
    7) Restart your computer.
    8) Open Start, right-click My Computer, and then click Properties.
    9) Click the Advanced tab.
    10) Under Performance, click Settings.
    11) Click the Advanced tab.
    12) Under Virtual Memory, click Change.
    13) Click System managed sized. Click OK, ok, ok and make sure to apply.
    14) Restart your computer.

  • Radeon Graphics driver

    Hi
    I am using HP Pavilion 14, core i7-4500U CPU @1.80 GHz 2.40 GHz, 4GB RAM, 750 HardDisk, 2GB Radeon Graphics. 
    Yesterday i setup windows 7 ultimate from windows 8.1 due to some techinical problem.
    Now how do i get Radeon Garphics card driver?
    Thanks
    Nazmul

    Hi @nazmulislam
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your issues with drivers for Windows 7. Here is a link that might help with the drivers. Just select Windows 7 if available.
    I would be happy to assist if needed as there are many models of HP Pavilion 14 Notebooks, I would need the model number.
    How Do I Find My Model Number or Product Number?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • ZEN 2GB driver with vi

    I purchased a ZEN MP3 Player 2GB, using windows vista home basic and cannot install the driver for this device on my computer. I have tried many times to install it but all attempt had the same result with the message on my display that the driver cannot be found, please contact creative.
    I am not talking about the software which comes on a CD, I am talking about once I plug in the device my computer with windows vista home basic simply is unable to find the driver or whatsoever. Once I have contacted the local dealer and they recommended that I should download the latest firmware for my device which I did but the result was the same because to install the firmware you need to plug in your device but since my device cannot be installed the firmware does not recognise any device and cannot be installed. After that the local dealer changed the device for me but nevertheless the new device cannot be installed as well. Is there anyone who can help me out with this problem
    It is kind of frustrating if you buy a Christmas present for your partner and it cannot be used even you install, uninstall, install, uninstall the whole thing a several times.
    Thanks, your help is appreciated here

    I have got my Zen Stone Plus working like this: I plugged the Zen in and waited for Vista to do its stuff, then when the installed failed I was able to use the browse function it offered, when you don't have a disk, I just put c:/ and let Vista search my hard drive. Vista was able to find the drivers and complete the install. If I look in devise manager it now has the same drivers and route as stormy3 (see other post) Working fine now.

  • Photoshop fails under Vista with X1600 on MBP

    All images in Photoshop display overlaid with crosshatched lines. Adobe points at ATI and says "Known problem: update the video driver". ATI points at Apple and says: "Drivers are supported by the laptop manufacturer". Apple has nothing to say on the matter. How do I ensure I have the most up to date video drivers installed?
    System configuration:
    MacBook Pro 17" Core Duo 2.16GHz
    Graphics card: ATI Radeon X1600
    Vista 32 under Boot Camp
    Adobe Photoshop CS4
    Bruce

    Hi Bruce,
    good news.
    Glad to hear that it helped you.
    As for the Mobility Drivers, ATI/AMD (and Nvidia too) only support a handful of notebook manufacturers directly and Apple is non of them.
    The 'funny' thing however is, that all needed drivers are in the Desktop Radeon Driver package.
    Only thing missing are some lines of code in the .inf file which is needed for installation.
    Have Fun
    Stefan

  • My Sound Blaster Zx issues

    Other than the problems I am about to write, it has been an amazing gaming experience with all the games I've played. I've been using Sound Blasters since the ISA 64 (DOS era) times. I hope for the best for Creative.
    Second of all, I am using the latest drivers from the website and after the list of problems you'll see my full system specs I copied from archive sorry for unnecessary details of the system.
    Too much noise when I am using the headset it's very annoying too much to handle sometimes. Scrolling up and down the web pages make noise. I don't know what causes this issue. It may be that the shielding on the headset's cables is too bad (it may be since it's leaking the speakers to mic. People can hear what I am listening to even if the mic is disabled on the headset). There is the same noise when it's on speakers too but I cannot verify whether it's the cables that are picking the noise or the card. In order to solve this issue I connect the Sound Blaster Zx to the bottom of the motherboard where there is a PCIe 16x. This eliminates most of the noise but creates so many other problems I am not even going to talk about since Creative may not have designed this card's controller to work on PCIe 16x bus. All the problems exist when it's connected to 1x PCIe and 16x problems are not listed below.
    Frequently upon restart, it asks me too choose the sound card for PRO STUDIO and Sound Blaster Speaker Setup separately. The names are followed by numbers. ex: 2 - Sound Blaster, 3 - Sound Blaster
    Surround left is a lot louder than surround right speaker. I have to adjust it's dBs on the Speaker Level panel. First, I thought this could be an issue with the T6160 box, but I have a 5.1 surround headset and I feel the same to some degree when I'm using it. I play Battlefield 3 usually and it's very noticeable if you want to try.
    CrystalVoice Focus doesn't work at all other than making the mic stereo. You can hear which direction sound is coming from, but it doesn't limit the angle. It still captures everything. I need it to capture only my voice not the surroundings outside the angle.
    This is not a terrible issue: Sound Blaster does a fantastic job on canceling the sound coming from the speakers if that sound was processed digitally. Without any effect on the voice (mic) it fails to cancel the echo and creates a 2 - 3 degree loop (then it drops)
    When all the five jacks are connected upon restart sometimes it doesn't stay with the last chosen settings (5.1 speakers), it automatically switches to headphones.
    Sometimes channels get all mixed. Either have to restart or switch between headphones and speakers
    Again, I'm posting full specs since I heard other peripherals may be the reason to some problems.
    AMD Phenom II X4 965 BE @4.1
    CM Seidon 120M Water Cooling
    G.SKILL Ripjaws Z Series 2 x 4GB DDR3 2400
    GIGABYTE GV-R779OC-2GD Radeon HD 7790 2GB
    SAMSUNG 840 Series 120GB
    Logitech G710+
    Logitech G700s
    ROCCAT ROC-13-400 Alumic
    Creative Labs Sound Blaster Zx
    Creative Inspire T6160 50 Watts 5.1
    Cooler Master CM Storm Sirus 5.1
    JVC HA-RX900
    COOLER MASTER Storm Scout SGC-2000-KKN1-GP
    FSP Group AURUM 92+ Series PT-450M
    LG IPS224V-PN Black 21.5" 14ms
    ASUS VG248QE Black 24" 144Hz 1ms

    Originally Posted by KaziQ
    Other than the problems I am about to write, it has been an amazing gaming experience with all the games I've played. I've been using Sound Blasters since the ISA 64 (DOS era) times. I hope for the best for Creative.
    Second of all, I am using the latest drivers from the website and after the list of problems you'll see my full system specs I copied from archive sorry for unnecessary details of the system.
    Too much noise when I am using the headset it's very annoying too much to handle sometimes. Scrolling up and down the web pages make noise. I don't know what causes this issue. It may be that the shielding on the headset's cables is too bad (it may be since it's leaking the speakers to mic. People can hear what I am listening to even if the mic is disabled on the headset). There is the same noise when it's on speakers too but I cannot verify whether it's the cables that are picking the noise or the card. In order to solve this issue I connect the Sound Blaster Zx to the bottom of the motherboard where there is a PCIe 16x. This eliminates most of the noise but creates so many other problems I am not even going to talk about since Creative may not have designed this card's controller to work on PCIe 16x bus. All the problems exist when it's connected to 1x PCIe and 16x problems are not listed below.
    Frequently upon restart, it asks me too choose the sound card for PRO STUDIO and Sound Blaster Speaker Setup separately. The names are followed by numbers. ex: 2 - Sound Blaster, 3 - Sound Blaster
    Surround left is a lot louder than surround right speaker. I have to adjust it's dBs on the Speaker Level panel. First, I thought this could be an issue with the T6160 box, but I have a 5.1 surround headset and I feel the same to some degree when I'm using it. I play Battlefield 3 usually and it's very noticeable if you want to try.
    CrystalVoice Focus doesn't work at all other than making the mic stereo. You can hear which direction sound is coming from, but it doesn't limit the angle. It still captures everything. I need it to capture only my voice not the surroundings outside the angle.
    This is not a terrible issue: Sound Blaster does a fantastic job on canceling the sound coming from the speakers if that sound was processed digitally. Without any effect on the voice (mic) it fails to cancel the echo and creates a 2 - 3 degree loop (then it drops)
    When all the five jacks are connected upon restart sometimes it doesn't stay with the last chosen settings (5.1 speakers), it automatically switches to headphones.
    Sometimes channels get all mixed. Either have to restart or switch between headphones and speakers
    Again, I'm posting full specs since I heard other peripherals may be the reason to some problems.
    AMD Phenom II X4 965 BE @4.1
    CM Seidon 120M Water Cooling
    G.SKILL Ripjaws Z Series 2 x 4GB DDR3 2400
    GIGABYTE GV-R779OC-2GD Radeon HD 7790 2GB
    SAMSUNG 840 Series 120GB
    Logitech G710+
    Logitech G700s
    ROCCAT ROC-13-400 Alumic
    Creative Labs Sound Blaster Zx
    Creative Inspire T6160 50 Watts 5.1
    Cooler Master CM Storm Sirus 5.1
    JVC HA-RX900
    COOLER MASTER Storm Scout SGC-2000-KKN1-GP
    FSP Group AURUM 92+ Series PT-450M
    LG IPS224V-PN Black 21.5" 14ms
    ASUS VG248QE Black 24" 144Hz 1ms
    Hello, KaziQ.
    I can't say about headset, my microphone and headphones are separate and they are working fine.
    I had the same problem with 2- sound blaster, 3- sound blaster, but it was on old buggy system, I made a fresh install of Windows 7, now I think this problem is gone. But it's smth related to Creative drivers.
    I have no problems with volume of channels, seems all good, right-left, both rear, etc.
    As for CrystalVoice- all the same. It's making microphone Stereo, somehow, I think, it should help with angles u are speaking into it, but i don't know how, coz this feature seems kinda useless to me. On other hand, I can hear myself and people can hear me perfectly, using this small mic that came with Z soundcard.
    As for switching to headphones- yes, I had this issue on old system. Reinstalled from scratch Windows (formatted drive C) and drivers. Problem is gone for now.
    And I never got mixed channels, never! Even on old system.
    But I advise to do the same... try clean installation...
    And good luck. )

  • X-Fi Titanium Fatal1ty Champ series I/O drive

    -X-Fi Titanium Fatalty Champ series I/O dri've? Hi guys, new guy here. Hoping someone can help me out because I'm on the verge of throwing myself off the tallest building around here any moment...
    I tried emailing for support before but did not receive any response at all.
    I recently purchased the X-Fi Titanium Fatalty Champion Series with front panel included for my new computer that I bought. I installed the card and the front I/O panel that came with it, plugged it all in according to the directions and installed the drivers off the cd. However, when plugging my headset to the front X-fi I/O panel, I don't get any sound whatsoever.
    Everything is seated as tight as it can and nothing disconnected inside the case. The front panel is lit up as well which means it should be running, and when I turn the volume knob on it, I see its adjusting the volume on the computer itself, so it should be working...but again... I don't hear any sound when plugging my headset (3.5mm Fatalty Gaming Headset) into the headset jacks.
    Please help.
    My stats are the following:
    Motherboard:? Asrock X58 Supercomputer
    Ram:? 6GB OCZ OCZ3P333LV3GK 333MHz DDR3-333/PC3-0600
    Video:? Sapphire Vapor-X Radeon 4870 (2GB)
    OS:? Vista Ultimate x64 SP
    Case: Thermaltake Armor+ VH6000BWS
    I even tried disabling the Realtek onboard sound and uninstalling its driver, and the front still wont work when I plug my headset in.
    So if you can, please help me. I want to get this thing working. Thank you.
    Kind Regards,
    John
    [EDIT] OOPS! Forgot to say that I bought the PCIE version. I think mine only came with two black wires/cords to plug from the card the to X-fi I/O panel.
    Message Edited by Yokhanan on 06-24-2009 02:07 [email protected]

    Wow and I thought the tech support directly was slow... angry:73.3.99.30

Maybe you are looking for

  • Creation of archiving objects in AFX_WB

    Hi, I am trying to create an archiving object in AFX_WB. I assigned a custom package which I created to the archiving object. The transaction generates the programs for the archiving object by itself with the inputs given. In one of the steps, I am g

  • Report Formating

    Hi, I have a report with two sections as a tabular layout. The first section is placed such as First Row :Code <<code_field>> Name <<name_field>> Date <<date_field>>. Second Row : Department :<<dept_field>> Course<<course_field>> This is typically as

  • Game with layers

    Hi, I'm trying to develop a little game. It's a simple 3/4 view (top-down view isometric) car game (quite classic I know). But what I'm looking for is how to add different layers in my game. I mean when the car is under a tree, then the car should di

  • Marking all email inbox as read

    Is anybody getting tired of reading email on their IMac and then spending the rest of the day marking the same mail on their iPad and iPhone as read by opening each and every individual email? I hope I'm missing something. jmf

  • How to connect to the repository?

    Hi, i want to transform the information of the design and configuration objects from the repository into Topic Maps. Therefore i need to connect somehow to the repository and read its data. Does anyone know how to do this? Is the repository stored in