HD movie & Movie 08 exange data

1/ how do i compress HD movie for you tube /
2 / how do i compress movie for e mail yahoo NOT mail apple
2/ HD movie saved as project when imported in movie 08
somes pictures do not show
3/ cannot import quick time .mov saved with Movie HD to movie 08
thanks

Just picked up a Panasonic ZS3 and I am experiencing the fast playback issue with iIMovie '08.
Apple Acknowledges the issue - see link:
http://support.apple.com/kb/HT3481
This website was updated June 09. Workaround is to upgrade to imovie '09.
I think before I upgrade I am going to check out the Canon SX200 IS and see if their codec has the same issue in imovie '08.
From reviews I read, Canon has more manual features vs. Panasonic, however, when shooting video I believe the Canon can only go up to 4x optical zoom.

Similar Messages

Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03

Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
Romil

Hi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid

How can we move the 'application data\apple computers' folder to another location

We use roaming profiles and the Application Data folder is stored on a network drive with restricted space (500MB). This has not been a problem in the past but since we've been rolling out iPad's & iPhones, this restriction is becoming a problem as iTunes download's ios updates and stores device backups in 'application data\apple computers' folder (and not in the media library).
Does anyone know how we can move this 'application data\apple computers' folder to another location or force iTunes to store the downloads/updates in the media library (which can be moved)?
Thanks very much in advance for any help.

Move the iTunes Library elsewhere, launch iTunes with the Shift key held down, and point it there.
(60614)

How to move all app data from one user to another? (One mac)

Hi. I've been having this problem for a while. So recently, I've made a new account for myself, since I was using my mom's user account. I don't want to keep all of my files, emails, and icloud on her user, since it's used by everyone in my family. I use iMail now because hotmail blocked my email because "Someone hacked me" and they kept it locked for all these months, and I can't give enough proof to show it was mine, since I forgot every email I've sent now.
And iMail is pretty cool, adding your own rules and stuff. Except you don't need a password to log in. I just deactivate my iMail via system preferences as a log-out, and then re-activate it as a log-in.
So, back to the question.
How can I move ALL app data from my mom's user account to my new one? Her acount also has pictures of our germany vacation. So not every file.
You see, I game on my mac mostly because steam is really complicated, using internet just to play a game that doesn't need internet and stuff.
And steam doesn't have a lot of casual games.
So I want to move my game data, save files and every little piece of application info that my games have on my mom's account to mine. I've asked this question on Yahoo answers, and all I got was an answer of "File IS data, or datum itself, You are wrong. I cannot give you an answer." -.-
I'm not experienced with terminal either, so I'll need a ton of explanation of how to use it if that's how it can be done. It really really confuses me and I'll just give up.
Thanks in advance.
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?

Nour j wrote:
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?
http://www.apple.com/osx/preview/
Will be released sometime in the fall. Cost unknow at this time as Apple has not released this info to the public.

Want to move the planning data to HFM

Any recommendations to move the Planning data to HFM.
Thanks in Advance....
Prasanna..

Turn on keyboard navigation in the Keyboard shortcuts of Keyboard and Mouse prefs and you can use the keyboard to navigate through the menus, folders, etc. However, there is no way to drag.
Set full keyboard access to "All Controls" and you can tab through all the buttons in the dialog boxes. Use spacebar to "click" the selected button.
In the Finder, Cmd+down arrow opens a file/folder. Cmd+Up arrow goes up in the hierarchy.
Combine this with the previous tip and you can have it all, mostly.
Also, without any of that, esc or cmd+. cancels, and cmd+first letter of button usually selects the button. That last one is application specific.

Move Field symbol data to Internal table

Dear All,
                 Please suggest how to move field symbol data to internal table. The requirement is I have dynamic data in Field symbol which to move to table parameter of a function module.
Thanks in Advance
Rams.

Dear All,
                In need to pass tabular data i.e. multiple entries from field symbol to the table parameter of the custom function module.
Field symbol is declared as below:
FIELD-SYMBOLS: <FS_EXCEL_TAB> TYPE STANDARD TABLE,
                             <FS_TABLE_HEADER> .
DATA WA_PD LIKE PRICE_DOWNLOAD.
APPEND <FS_TABLE_HEADER> TO <FS_EXCEL_TAB>.
CLEAR <FS_TABLE_HEADER>.
WA_PD-VKORG = <FS_EXCEL_TAB>-VKORG.u201D Problem while using this statement
APPEND WA_PD TO PRICE_DOWNLOAD.
   CLEAR WA_PD.
Field symbol <FS_EXCEL_TAB> is populated like this.
VKORG | KUNNR_SH | KUNNR_SP |
0015      | 102105       | 102105       |
Now I need to move this data to table in tables parameter of custom fucntion module.
Thanks in advance,
Rams

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Can we move char type data to packed decimal

Hi
can we move char type data to packed decimal??
Thanks
Devi

Hi..
that depends on the data in the character variable..
if that character variable contains onli numbers then it is possible.
<b>data c type c value '1'.
data p type p.
p = c.
write p.</b>
here the output is 1.
If it contains even a single Alphabet , then it goes for a dump.
<b>data c type c value 'A'.
data p type p.
p = c.
write p.</b>
here u will get a short dump.
hope u understood.
regards,
sai ramesh

Move Customer master data to btween systems

Hi Gurus,
I m facing a question to move customer master data between systems. how can we do it other than writing bdc programs.
any responses would be awarded,
thanks a lot.
samson

Hi,
You can use ALE distribution model (BD64) and then send the data using BD12/13 transactions.
Regards,
Eli

How do you move your iTunes data to another computer?

Hey guys,
I'm planning to move my iTunes data in my old and defect Windows laptop to my newer Windows laptop. All I want is, transfer all my stored music, my stored apps and iPad+iPhone backups to my newer computer without the iPad and the iPhone to lose data just because it went to a newer iTunes. How can I do that? Can someone help me?
My iTunes in the old one is iTunes 11.0 while the new one will have the latest one or something. I'm planning to move my iPad 2 and my iPhone 4S data.

iTunes: How to move your music to a new computer - Support - Apple

How can I move my iTunes data from my C: Drive to my D:Drive

My C: is nearly full, while my D: has plenty of space. I am afraid to un-install and re-install it as it will lose all my iPhone data next time I synch. Also, even if I do install it to my D: won't it still place it's data on my C:???
NOTE: It's not my music that is the problem, it is my POSCASTS. I have a lot of video podcasts, movies and I see no way to re-locate them to another drive
thanks,
JIM

iTunes prefs -> Advanced. Set the iTunes muiusci folder location to where you want on the D: drive.
Then go to iTunes menu Advanced -> Consolidate library.
This will copy (not move) the songs to the D: drive in the folder you specifed. iTunes will use this folder for everything in your iTunes library and also for all new addition to iTunes.
Once finished, you can delete \My Documents\My Music\iTunes\*iTunes music* folder and free up the space on yoryour u C: drive.

When I use migration assistant to move all my data from my Macbook Air to my Pro, it uses the last full back up not the last partial back up. The last full backup is two months old though. Both machines are running Mountain Lion. How do I get my latest 1

Hi
I need to move my data from a time capsule that backuped my Macbook Air (which has been destroyed by liquid damage) to my Macbook Pro. The Air and the Pro both run Mountain Lion and I have a clean installation on the Macbook Pro.
I used Migration Assitant to move the data across but while I have back ups of my Air up to 24 hours before it was destroyed, the migration assistant only wishes to migrate data from the last full back up that it finds which is 2 months old.
Please can you advise how I can restore the latest data to my Macbook Pro.
Many thanks.

please let me know the linksys device model number you are using ..

HT201269 how do i move all my data from blackberry bold 9700 to iphone 5

Hi,
I want to move from Blackberry Bold 9700 to an Iphone 5 but I want to save all my current data on my blackberry and move it all to the iphone 5. How can I do this? Many thanks for any help you can give me.

Follow this guide: http://support.apple.com/kb/HT2109. You'll have to sync after restoring from backup to return you music, apps and other iTunes media to your new phone.

How to move full repair data from DSO1 (soruce) to DSO2(target)?

Hello experts,
I doing full repair for po in first level ods, Do i have to move this data from first level ods to second leve ods? or the daily nightly delta from first leve ods to second level ods will take care of it?
If i have to load the data from first level ods to second level ods how to do it?
do i have to delete the data first from first level ods before i do the full repair for the po? or just run the infopackage for the po's with the full repair option checked?
note:we don't use dtp here to load data from bi to bi here.
Thanks in advance.
Sharat.

Delete the first level and second level DSO' s data and set a full repair in the infopackage. the delte will take take all data to second level as ur deleting the data from second level.

Items in Tree control move around when data is submitted using custom ItemRenderer

I'm working on a Tree control with an XMLListCollection as
its dataProvider.
The dataProvider has information looking like this :
quote:
<?xml version='1.0' encoding='utf-8'?>
<INFO>
<FIELD label="STR_USER_NAME"
type="text"
value=""
>
</FIELD>
<FIELD label="STR_USER_EMAIL"
type="text"
value=""
>
</FIELD>
<FIELD label="STR_OPTIONAL"
type="branch"
value="0"
>
<FIELD label="STR_USER_ADDRESS"
type="text"
value=""
>
</FIELD>
<FIELD label="STR_USER_POSTAL_CODE"
type="text"
value=""
>
</FIELD>
</FIELD>
</INFO>
So in the Tree control I'd like the information to show up
with a label and
an
editable textbox for each item :
[Label] [textbox]
To do this I made a tree like this :
quote:
<mx:Tree id="userTree"
editable="true"
rendererIsEditor="true"
editorDataField="curVal"
itemRenderer="{new ClassFactory(ItemRendererUser)}"
itemEditEnd="e_ProcessData(event);"
dataDescriptor="{new DataDescriptorUsers()}"
showRoot="false"
verticalScrollPolicy="{ScrollPolicy.AUTO}"
/>
where the e_ProcessData() function looks like this (I used
http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/js/html/wwhelp.htm?href=c
elleditor_073_16.html#202105 as a guide) :
quote:
public function e_ProcessData(event:ListEvent):void
event.preventDefault();
userTree.editedItemRenderer.data.@value =
ItemRendererUsers(event.currentTarget.itemEditorInstance).curVal;
userTree.destroyItemEditor();
userTree.dataProvider.notifyItemUpdate(userTree.editedItemRenderer);
} // END OF e_ProcessData()
I attached the rest of the files because they're a little
bit longer.
When I run the program, the data shows up fine when it is
initialized the
very
first time, and I made a test button that just dumps the
contents of the
dataProvider in a trace statement to verify that the data has
been set
properly.
The problem I've run into is whenever the textfield is
edited, the item
that
I've selected jumps around the list.
For example, if I edit the item "STR_USER_NAME" after I
finish the edit, it
will move from the very first position in the Tree to the
bottom of the
Tree.
I traced the contents of the dataProvider and the
dataProvider structure
stays
the same, with the "STR_USER_NAME" at the top, but if I look
at the flex app
in
the web browser, its position is at the bottom of the Tree.
This happens for every other item I try to edit... I read in
the
documentation
that the ItemRenderers are recycled, so it means I should be
checking to
make
sure the initial states are covered, but I'm not sure how
this affects my
application.
Can anyone help me out with this ? Its very confusing - I've
tried making
an
ItemRenderer using pure actionscript, mxml and the
combination you see in
this
example and I always end up with the same behaviour - So I
must be missing
something critical...
// ItemRendererUsers.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
verticalScrollPolicy="{ScrollPolicy.OFF}"
horizontalScrollPolicy="{ScrollPolicy.OFF}"
creationComplete="initItemRendererUsers();"
>
From my FAQ:
Q: I've created a custom itemRenderer component to use in a
List
based component (Datagrid, TileList, HorizontalList, etc.).
When my List
first displays, everything looks fine, but when I scroll it
or change the
dataProvider, some of the itemRenderers show values or
formatting that
aren't right. How do I fix this?
A: List-based components don't draw a renderer for every item
in the
dataProvider. Instead, they create enough to display what is
on screen now,
plus one or two more waiting in the wings. This means they
recycle the
renderers rather than creating new ones when you change
dataProvider or
scroll up and down. When you use a creationComplete event to
set up the
itemRenderer, that event doesn't happen again when the
renderer is used for
a different set of data. The solution to this is to override
the set data
protected function that most components have.
For more information, check out the following resources:
http://www.adobe.com/devnet/flex/articles/itemrenderers_pt1.html?devcon=f1
http://blogs.adobe.com/aharui/2007/03/thinking_about_item_renderers_1.html
Please note, I post this FAQ weekly, and you can find a
permanent copy of it
here
http://www.magnoliamultimedia.com/flex_examples/Amys_Flex_FAQ.pdf

"peterh8234" <[email protected]> wrote in
message
news:gaqttd$kft$[email protected]..
> Yes - the set and get functions are listed down below.
But the quirky
> behaviour
> is the same regardless of whether I override the set and
get functions or
> not.
>
> I noticed there was another variable called listData -
should I be using
> that
> one or the data variable to read and write to the
dataProvider ?
>
> // _data
> [Bindable] public var _data:Object;
> [Bindable("dataChange")]
> //
> override public function get data():Object
> {
> trace('[ItemRendererDefault.GET data()] called for {' +
> _data.attribute("label") + '}.');
> return _data;
> } // END OF get data()
>
> //
> override public function set data(value:Object):void
> {
> _data.@value = inputText.text;
> trace('[ItemRendererDefault.SET data()] called for {' +
> _data.attribute("label") + '}.');
>
> invalidateProperties();
> } // END OF set data()
Your set data needs to set a flag that gets picked up in
commitProperties()
and does your thing that you were doing before in
creationComplete. You
should see examples of this in the links I posted. Instead of
this:
_data.@value = inputText.text;
you should look at implementing IDropInListItemRenderer,
which will allow
you to dynamically determine which field to look at, instead
of hardcoding
it. You also might wind up overwriting the stored value with
a null value
when the List passes the stored value in. I'd encourage you
to really go
through those links I posted and make sure you understand
what they're
saying. The itemRenderer life cycle is one of the hardest
things to
understand, but once you understand it, it makes many things
in Flex much
easier. It's worth investing the time.

HD movie & Movie 08 exange data

Similar Messages

Maybe you are looking for