HD WorkFlow, Having Real Time Issues

Hey I've captured 422 ProRess, I need to know is there a quicker way of working with it in realtime Mulitclip editing, other than conforming back down to HDV. I'm experiencing a lot of dropped frame issues.
In HDV I could cut realtime mutlclips but now that I've online with ProRess My system acts like it can't handle it which is nutz, I've got a killer system. I thought the proRess codec was suppose to be better than the HDV for this reason. Any workflow solutions would be greatly appreciated.
Thanks
J.

What sort of drives is your media stored on? ProRes has a MUCH higher data rate than HDV. HDV is in the ballpark of 4MB/s, whereas ProRes is between 18MB/s and 24Mb/s. Getting multiple streams of HDV for multicam shouldn't be too difficult, but getting the same for ProRes...multiple streams? You need a pretty hefty RAID for this. Two Drive eSATA Raid 0 might work. Better to have a 4-5 drive Raid 0 or Raid 5. ProRes is lighter than Uncompressed HD, but more taxing than HDV...and again, you are trying to play back multiple streams when you are using the Multicam feature.
Shane

Similar Messages

Real time issue

Hi all,
Can any body plz send me some FICO real time issue on [email protected]
and plz tell me hw shld I prepare for interview
Thanks & Regards
Vaibhav

Hi Balraj,
In the normal practice, developers will try to find the similer infocube (as per the requirement) in the Business content. But always you will not be lucky to find such infocube in Business content. You need to create at your own to suite the business requirements. Regarding the characteristcs & key figure, it 's again depend on the requirements. Calculated object can be assign as key figure like. Sales qty, revenue & net sales etc. where as Dimesion (characteritcs) will be purely depends on the reporting point of view. Like Customer, Material & Sales Document type etc.
Hope this will help you !
Thanks,
Sanjiv

Real time issues

hi there,
can any one share some of the issues that have been dealt with in real time. i.e.during blue print stage, <b>especially in realisation stage</b>, final preparation stage
puhlease answer this question immediately

Hi Medasani,
Real time issue you can get it from the Sap support consultants. Hence, getting all the information is very difficult.
In what basis you are asking let me your requirements.
For Example :- Tolerance limits is has to increase to Rs.1 to Rs.100. for employees and vendor / customer. This is the issue from client.
How you will decide that to increase.
First you should understand the clinet work flow and get the approval from client end (core Team) then you have to increase meanwhile you have to decide the % also.
Oba3 /Oba2
Warm Regards,
Sivakumar Sathiyamoorthy

SEM-BPS Real times issues

Hi Gurus,
I'm new to SEM-BPS Real times issues also some interview questions on SEM BPS. How we want to answer please forward to my email id: [email protected]
thank regards
Suresh

Have you tried posting to th eBusiness Planning forum which is focused on SEM/BPS? It's under the Business Intelligence category.

Please tell me some real time issues faced by u in SCRIPTS

please tell me some real time issues faced by u in ur experience

First understand SAP scripts are client dependent..changes automatically not reflects in all development client once it is change in once client.
We mostly see alignment issue in SAP script it is mostly because of printer settings etc...
Also we may have few problems when printing unicode characters.. for printing double digits characters... like Japanese, chinese, korean etc.. we should have a printer with unicode enabled..
Regards,
SaiRam

Real time issues faced during Sap Implementation.

Hi All,
Please let me know some real time issues faced during SAP end to end implementation. Hw did u get over the issues.
Issues faced during Production Support.
I have an F2F interview. Please help me out.
Regards,
Somya

Hi,
This is Srinivas If u dont mine can u help me in Sending me the solutions to me what type of issues we will face in sap/bw implementation like issues and defeacts can u send to my mail [email protected] can u give me solution for error9,error8,return8 can able to plz help me .
Regards,
Vasu.

Real time issues in fdm

What are the real time issues in fdm

Nice and vague, try to be more specific with your questions and you will likely receive a better response.

Calling Oracle Workflow in Real-Time

I want to modify the logic in Oracle Apps (both Oracle self-service (pure HTML and JSP) and Oracle Forms applications) to make real-time calls to a mainframe system. The page needs to take different actions depending on the data from the mainframe system.
I want to avoid actually customizing the Apps and Forms pages if possible due to customization maintenance and support issues. I have been told that I can use Oracle Workflow to modify the actions of the pages without having to resort to customizations, as calls to Workflow are already embedded. Is this true, and if so, how would I go about inserting a call to a mainframe system?
I am considering mainframe calls using either a proprietary ODBC driver from a third-party vendor, or devising some sort of SOA interface to the mainframe (I know it would require custom development on the mainframe side).
Thanks!

I'm pretty sure the sbRIO cards only have 1 FPGA on them. So when you load the second FPGA code, the first is being overwritten. You need to make a single FPGA VI that can handle both functions. If you post your code, we can give more detailed advice.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can anybody get me some real time issues?

hi alll gurus,
i am attending the interviews... with ur kindness am able to handle the all the basic level of
subject part. But, they are asking the issues and gap analysis what u have got and cleared?
so that , am requesting to get me some helpful data regarding above things.
am very thankful to u...
hope will get me the above...
regards
vasan

hi arun,
1.Mostly the issues are related to master data.Means the user enters wrong master data such as customer master fields (Eg:-Account assignment group,Tax code,Currency,Dopp etc) due to this processing of sales order gets stuck.
this situation applies to other masters as well like material master,condition master,output master etc.
2.Issues related to outputs :-If you have prepared any Z outputs then the user will ask change in the layout,additional fields in output,Wrong values may show in the outout, New output all together.
3.Issues related to Z reports :- Same as outputs.
4.New routines or userexits might coome in picture because of some specific bussiness reqirement which is not possible to deal with standard SAP.
5.Awareness issues :-This is frquently faced because some new users might not know how to operate the systems.
6.Authorization not provided for the users for a particular transaction.
Normaly the issues we face in support porject are in follwing categories
1.Awareness
2.Modifications
3.New requirement (Functional/technical/Abap)
4.Authorization
pl reward if it helps.
Thanks,
Sadhu Kishore

Having response time issues using Studio to manage 3000+ forms

We are currently using Documaker Studio to create and maintain our forms, of which we have thousands. Once we create the form we export it to a very old version of Documerge where it is then used in our policy production.
The problem is that because we have so many forms/sections, everytime we click on "SECTIONS" in Studio it takes a significant amount of time to load the screen that lists all of the sections. Many of these forms/sections are old and will never change but we want to still have access to them in the future.
What is the best way to "backup" all these forms somewhere where they are still accessible? Ideally I think I would like to have one workspace (let's call it "PRODUCTION") that has all 3000+ forms and delete the older resources from our existing workspace (called "FORMS") so that just has the forms that we are currently working on. This way the response time in the "FORMS" workspace would be much better. Couple questions:
1. How would I copy my existing workspace "FORMS" (and all the resources in it) to a new workspace called "PRODUCTION"?
2. How would I delete from the "FORMS" workspace all of the older resources?
3. Once I am satisfied with a new form/section in my "FORMS" workspace how would I move it to "PRODUCTION"?
4. How could I move a form/section from "PRODUCTION" back into "FORMS" in order to make corrections, or use it as a base for a new form down the road?
5. Most importantly....Is there a better way to do this?
Again, we are only using this workspace for forms creation and not using it to generate output...we will be doing that in the future once we upgrade from the very old Documerge on the mainframe, to Documaker Studio.
Many thanks to any of you who can help me with this!

However, I am a little confused on the difference between extracting and promoting. Am I correct in assuming that I would go into my PROD workspace and EXTRACT the resources that I want to continue to work on. I would then go into my new, and empty, DEV workspace and IMPORT FILES (or IMPORT LIBRARY?) using the file(s) that I created with the EXTRACT? In effect, I would have two totally separate workspaces, one called DEV and one called PROD?
Extraction is writing a copy of a resource from the library out to disk. Promotion is copying a resource from one library to another, with the option of modifying the metadata values of the source and target resources. You would use extract in a case where you don't have access to both libraries to do a promote.
An example promotion scenario would go something like this. You have resources in the source (DEV) that you want to promote to the target (PROD). Items to be promoted are tagged with the MODE = "To Promote". When you perform the promotion, you can select the items that you want to promote with the filter MODE="To Promote". When you perform the promotion, you can also configure Studio to set the MODE of the resource(s) in the source to be MODE="To Delete", and set the MODE of the resource(s) in the target to be MODE="" (empty). Then you can go back and delete the resources from the source (DEV) where MODE=DELETE.
Once you have the libraries configured you could bypass the whole extract/import bit and just use promote. The source would be PROD, and the target would be DEV. During promotion, set the target MODE = "To Do", and source MODE = "In Development". In this fashion you will see which resources in PROD are currently being edited in DEV (because in PROD the MODE = "In Development"). When development is completed, change the MODE in DEV to "To Promote", then proceed with the promotion scenario described above.
I am a bit confused on the PROMOTE function and the libraries that have the _DEV _TEST _PROD suffixes. This looks like it duplicates the entire workspace to new libraries _PROD but it is all part of the same workspace, not two separate workspaces? Any clarification here would be helpful.
Those suffixes are just attached by default; these suffixes don't mean anything to Documaker. You could name your library PROD and use it for DEV. It might be confusing though ;-) The usual best practice is to name the library and subsequent tablespaces/schemas according to their use. It's possible to have multiple libraries within a single tablespace or schema (but not recommended to mix PROD and non-PROD libraries).
Getting there, I think!
-A

Real time issue and need a solution

Hi Bi experts,
Currently one standard cube is already running in production.
Now i need to make a multiprovider with this standard cube and another one new DSO. But i wish to add a new infoobject to the standard cube, without affecting the production. Because it has being used for so many areas.
How to add a infoobject to that std cube?
Any solution pls suggest me...
regards
peras

Hi,
Try creating a Zcube as Ashok had mentioned above, else try remodelling.
Regarding remodeling Steps
Remodeling is one of the good feature in BI.
This helps in remodeling your Infoprovider, when its filled with data.
You can add characteristics and key figures in BW 3.5 without deleting data in the infocube, but you can't remove them without deleting all data first.
Deleting data is also needed when you change dimensions.
If you dont need any history data you can just add the keyfigure in Edit Mode.The corrresponding update rules may get deactivated and you may have to reactivate them again.
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://help.sap.com/saphelp_nw70/helpdata/en/d0/46144236bcda2ce10000000a1550b0/frameset.htm
/thread/782986 [original link is broken]
info cube
Remodeling Tool in BI 7.0
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/06/28/remodelingToolinBI7.0
Library-Remodeling InfoProviders
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/frameset.htm
Remodeling concept in BI 7.0
Adding Key figure to existing cube
Adding Key figure to existing cube
Thanks,
JituK

Reg: real time production issues

Hi friends
what type of Production issues we will face in GL, AP, AR, AA, CC, PC, IO, PA, COPA
pls give me some examples and resolves my mail ID: [email protected]
thanks in advance

Hi Madhu,
What Issues you see in this community are real time issues.
you can pick any 5 of them which you can understand better with solutions
All the isssues posted in this community are real time and struggling by someone in the industry
Pls assign points if this is useful
Best Regareds
Ashish Jain

Hi , any body can send real time problems they faced

hi every body this is siva from banglore, any body can send the real time problems they faced in sap crm and how they solved if any body kindly send to my id : [email protected]

hi Siva,
All the issues in the forums are the real time issues
YOu can just go through them .
Also why do you need real time issues.
If you have any issues post it here and some one can help you

Please send me some real time quetions in REPORTS/ ALV REPORTS

please anybody can send me some real time issues and quetions from REPORTS,
ALV REPORTS

Hi,
Report is basically a program which extracts the data from the database tables based on some inputs and gives the output as a list.
Report are classified as Classical Reports, Interactive Reports and ALV Report.
Classical Report is a normal report which just displays the output.User cannot interact with that report.
Interactive Report is nothing but, a user can interacte with the report.After a basic list is displayed, user can click on some field on the list which generates a secondary list giving the necessary information relevant to that field.
ALV Report is to provide users with a consistent, user friendly and functional method of manipulating the data, which appears on report lists. ALV provides more advantages than the normal report
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_REPORTS_FAQ.html
http://www.sap-img.com/
http://www.sapdevelopment.com
http://www.sapmaterial.com
ALV programs.
http://www.geocities.com/mpioud/Abap_programs.html
. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
ALV
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Top-of-page in ALV
selection-screen and top-of-page in ALV
ALV Group Heading
http://www.sap-img.com/fu037.htm
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Regards,
Priyanka.

Real time scenerios

hi gurus,
Please send some real time issues u faced at the time of implementation and support . if possible send any link.
thanks and regards
raju

Hi
Most of the threads whcih are posted in SDN forumns are real time issues only, you need to go through them , so that you understand the issues clearly.
Thanks & Regards
Kishore

HD WorkFlow, Having Real Time Issues

Similar Messages

Maybe you are looking for