HD7850 2GDDR5 OC issue with Gigabyte B75-D3V MB

Hi, I have just put together the following PC and am having issue getting the Graphics card to work in the main PCIEx16 slot, it simply does give any output when in that slot.  The slot is PCIE3.0 and so is this card, but the card doesn't work in this slot, it only works in the PCIE2.0 x4 slot on this board.  However, I have tried the card in another machine I have and it works fine in that one in the main PCIE3.0 slot.  However, I have also tried a PCIE2.0 card in the Gigabyte main PCIE slot, and that does work...
I have already had a few ideas from the motherboard tech support, updating the bios, and Turning on legacy only support in the bios start up for PCI slots, instead of both UEFI & Legacy support, but that did not work.  They are now asking me to check if this card is UEFI compliant, and to update the BIOS in the card so that it is... however I am not sure about that and still think there is an issue with the board..  I also noticed that even with no graphics card in at all the only output that worked from the on-board (CPU) Graphics is from the D-Sub, the DVI output doesn't work either?
Appreciate any idea people may have on this, and if I need to update the BIOS on the card to UEFI Bios, what would I need to do?
Thanks
Intel I5 3570
Gigabyte GA-B75-D3V
8GB Corsair Vengeance
MSI Radeon HD7850 2GD5 OC
Seagate Barracuda 1TB
OCZ500w

Quote
Appreciate any idea people may have on this, and if I need to update the BIOS on the card to UEFI Bios, what would I need to do?
tell S/N of the card
about your current issue, ask gigabyte support

Similar Messages

  • Hi! So I am using a MacBook Pro with Retina Display, and I am having some trouble issues with sharing documents on Google.

    I am part of a 2 person group, who's entering a documentary for the NHD competiton. If you don't know what that is here's a link: http://www.nhd.org. Anyway, that doesn't really matter. What does matter, is that my partner and I, we're using Final Cut Pro X to make the documentary. I downloaded the Final Cut Pro X trial on my MacBook Pro so I could work on our documentary at home. My partner Cecilia, wanted to work on it as well, but using Windows Media Player or something like that. My family uses a lot more Apple than windows. So I come home, work a little on our documentary, go under file ---> share ------> masterfile---> settings-----> Video Codec -----> H.264. A couple seconds/ miniutes (it didn't take very long) later, I see our documentary as a Quick Time file pop up under my documents. I then log into gmail. i click compose, type in my partners e-mail, and then click the little paper clip to attach my new quick time file. Considering that it's 11 minutes long and is filled with media and audio, It's no suprise when I see that it exceeds the limit of ...gigabytes i think. So i send it to her using google drive. However, a couple minutes later, my partner says that she can see the file, but can't seem to download it. I double-check and make sure that I, as the owner, allowed her to edit the file. Then I check to see if i accidently clicked: "Prevent viewer from downloading" which I hadn't. Then i, myself, click on the file and click download and it works fine for me, but apparently doesn't work at all for her windows computer. This means that there's somethig wrong with her computer, or I did something wrong while sharing the file. Any ideas as to why the whole downloading process worked on my Apple Laptop and not her Windows Computer?

    These links might provide some information that may be of help.
    http://support.apple.com/kb/TA20831
    https://discussions.apple.com/message/2035035?messageID=2035035
    I've encountered this error myself upon occasion.  If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

  • Windows 8.1 Data reordering issue with Intel Adaptors

    According to Intel, there is a data reordering issue with their adaptors and probably this dumb WIDI software. This is from Intel site. they say some are fixed, "A future Windows 8 fix will address this issue for other Intel wireless adapters." I
    have one Nope, still broke. I get drops all the time. Brand new Toshiba laptop I7 16 gigs of ram and a SSD and a 2 gig Vid card. Would be nice to be able to play games but I get dropped all the time. Now would Microsoft quit hiding
    about this, and fix the darn thing. Also i'm a system admin for 13 years. I have build over 1000 PCs and servers. I know bad software. Please fix this. PLEASE. Its not going to just go away and its not just Toshiba, I have seen other companies with the
    same problem. If there is a Fix PLEASE POST IT. Or even a workaround I have tried everything.
    http://www.intel.com/support/wireless/wlan/sb/CS-034535.htm
     

    Hi,
    Have your first tried the software fix under this link for your network adapter?
    http://www.intel.com/support/wireless/wtech/proset-ws/sb/CS-034041.htm
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
    Also, you can try to check if there is any driver update under Device manager from manufacture's website.
    Kate Li
    TechNet Community Support
    Yep didn't work. Still get drops all the time, had to run a Cat 5E cable to my laptop from my modem, because I have Atheros Gigabyte Lan adaptor. Works Great. The Wireless still drops all the time. Has Microsoft let out the patch to fix this or is it coming in
    April in the 8.1 patch that's coming. Funny thing is all for Widi, I don't even use widi, I got the software to do that from Samsung works better on my TV. Intel and Microsoft need to get this fixed. because their driving off gamers and that's the
    people that make sure they buy Microsoft so they can play games. With the wireless link dead and a great laptop worthless what's the point. Ive been in IT for 13 years building PCs  and Servers how I knew how to run a 60 FT Cat 5e line thru
    a 2 story house and terminate it. Most people don't. Fix the problem.  

  • Major Issues with Windows XP and Sound Blaster Audig

    As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

    Thanks for the helpful reply Dan
    I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
    However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
    I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

  • Very serious issue with MSI K8N Neo2-FX: need urgent help!

    Hi! I am facing the following problems:
    1. 3D Mark 05 demo, COD2 single player and Half Life 2 become semi-frozen.
    2. The audio loops, and audio & video go out of sync.
    3.VPU Recover/Infinite loop issue DOES NOT kick in.
    4. The semi frozen game responds poorly to mouse movement.
    Note: All redundant processes and programs in Windows XP are closed. My system specs:
    Athlon 64 3000+ E6
    256 mb ddr333 kingston valueram + 256 mb ddr400 kingston valueram=512 mb ddr333 total memory running in dual channel mode @ 2.5-3-3-7 (RAM is OK, worked fine on my previous system)
    MSI K8N Neo2-FX bios version 1.B0(latest) chipset: nforce 3 250gb http://www.msi.com.tw/program/produc...il.php?UID=649
    gigabyte radeon 9600XT BIOS Part Number BK-ATI VER008.015.058.000 (Card stable at 1.6 V AGP, 1.5 V gave me VPU Recover; Card ran fine on my previous system)
    Realtek ALC 850 onboard audio
    Antec SL 450 450 watt PSU (new, voltages ok) latest drivers/bios/firmware for everything Windows XP Pro SP2 + all updates. Please help.

    Quote from: Richard on 03-May-06, 08:40:18
    bhanja_trinanjan,
    If you can get 2.3.3.6 Mushkin, OCZ, or Corsair, then you would be the set.
    PC-3200 or higher would be the way to go. If you ever plan on overclocking, then PC-4000 is the best option.
    Take Care,
    Richard
    Thanks for your help. I am trying to locate Corsair dealers in Kolkata(My hometown). Are there any known issues with the K8N Neo 2 FX? I bought this motherboard just a few days back and I am facing so many problems.
    Does this motherboard undervolt the AGP and RAM slots? Will I have to increase AGP and DDR voltage to make my system stable? Doesn't the raising of these voltages shorten the life of the video card and ram modules? I want to buy Corsair/OCZ/Mushkin. But in case it's unavailable, will Kingston RAM lead to an unstable system?

  • 10.4.11 Has Apple addressed/fixed issues with the latest update to Tiger?

    Like many of you, I installed the 10.4.11 update last weekend with disastrous results. I eventually had to Archive and Install and my machine seems to be recovered. Has anybody had this problem and gone on to try the update a second time with better results ?? Any words of wisdom?? or had some sort of feedback from Apple to indicate they have or are going to resolve the problems with this update.

    +I just posted this on the thread that seemed geared to those who "had success" (many more than half had issues) with the recent update after pi55ing and moaning due to crashing several times while trying to post there. Subsequently I found this thread and a bit of absoultion. I have eliminated the links, thinking them redundant but they are posted to that thread.+
    "If stupidity got us into this mess, then why can't it get us out?" "
    - Will Rogers (1879-1935)
    A little story, when I first tried to install Jaguar on my then Beige (Yeah, remember them!) G3 MT, it took me a full six months to get that "Darn Cat" in that house! Oh, how I sweated and swore, you talk about "legacy", I waved every "dead chicken" that was suggested to no avail. Ended up that before I bought the unit someone had switched out the CD/ROM for one from one year later, still Apple issue, mind you. I sent to OpAmp and got an original and "The Cat" slid in as quick as grease through a goose. That's how tightly wound Apple was and still is in many ways and is why they stopped the clones. This was one of a slew of many little things you had to get used to in "Mac Land".
    One other small thing you used to do a "clean install", you still can, but under OS 9, after you were satisfied (Conflict Catcher made things ever so easy!) all was peachy, you could simply trash your Previous System Folder and get back some valuable disk space. Well not to long after my success with the install of Jaguar and still not understanding OS X at all, I was still working mainly in OS 9, I did a Clean Install on my OS X, horsed around with settings which was difficult without Conflict Catcher and bravely trashed my Prev Sys Folder. Don't ever, EVER do that. What is a seemingly empty shell but for redundant Apps and meaningless abbreviations, is indeed a necessary if gigabyte eating Albatross you are doomed to carry!
    My point with these two parables is that we are creatures of trust and habit, living on borrowed time. We have been blessed with a computer system that is virtually foolproof given certain caveats, caveats if adhered to even marginally would guarantee success. I my self have gotten into some very bad habits of late and think that this may be the cause of my computers malaise.
    Drop to your knees and be grateful you don't have a PC (shudder!)! Yes Virginia, there is an Insanity Clause! I just installed WinXP on an Intel Mac, and after it was over all I wanted was a stiff drink and a shower!
    +There's always something worse than he77, there's always Vista!+
    Message was edited by: fla_cracker

  • Whitespace in User Account Name causes issues with various functions

    I've run into a few issues with users who have whitespace in their account names (for example, a user account name that was: "Joe Smith"). Generally, I think this is a result of windows interpreting the last name as a parameter when it tries to
    run a certain function. One place where this occurs and is easily replicated is in the "Troubleshoot Program Compatibility Wizard" which gives an error about permissions, another place this occurs is in the dx9 web installer which gives an error
    message concerning advpack.dll
    In both of these cases I've been able to 'fix' the issue by relocating the TEMP and TMP environment variables to a folder like C:\TEMP, however I still have some issues with other installers and programs such as the 3rd party Cordova build program and the
    android sdk which both get stumped by spaces in the user account name. From my understanding there is no way to change a user account name (not just the name which displays but the name which Windows reads) without deleting the account and copying often several
    gigabytes of files and settings over to a completely new account. Is this correct? Is there a way to remove the whitespace from an account name without these hackish workarounds? Is there anyway to report this as a bug to Microsoft in the hopes that they either
    remove support for usernames with whitespaces or come up with some way to make their internal features like the Compatibility Wizard operate correctly in these (fairly common) install environments? It's an incredibly pesky bug to identify....

    1. Spaces are allowed but not recommended. I would avoid using space(s) in account names.
    2. I do not understand what you have prevented from changing user name.
    3. For problems with 3rd pty programs ask support/forum of respective software vendors.
    4. If you feel like addressing Microsoft, use
    http://support.microsoft.com/contactus/?ln=en-us
    Regards
    Milos

  • Update iTunes 7.3.2 and now sync issues with AppleTV

    I knew it, I installed the latest upgrade as it said it solved some issues with iPhone Activation etc and added stability, well Apple is very stable, so stable it does not sync anymore with iTunes.
    I tried removing and reconnecting it to iTunes, this at first seemed to help, but the sync stopped after 10 minutes...
    Anyone else have issues?

    I would have to agree Capaho because I tried everything before...
    Well its official, after trying every troubleshooting tip & talking to tech support which sent me some more help info. My ATV is dead. I thought I had a revelation on what could be done to fix it but I was horribly wrong...I unplugged the unit for the 15th time to reset it and when I plugged it back in I heard the pop, and ATV was on its way to the Great Gigabyte in the sky.
    I bought the unit July 5th. It now sits in the bottom of my trash can...funny thing is Im gona waste another $400. I cant find my receipt and it doesnt matter cuz even tho it was efed before it "popped" i still get blamed for user error.

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • Issue with magsafe/charging (blinks green, amber, off)

    Having a quirky issue with my mid-2009 Macbook Pro.
    A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
    At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
    Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
    But the problem still exists.
    The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
    I have reset the SMC a couple times actually, but no change.
    Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
    Thanks!

    Try resetting the system management controller
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    If that did nothing for you,  try resetting the NVRAM
    https://support.apple.com/kb/HT1379

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

  • Issues with iMessage when switching data carrier (wifi - cellular)

    So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

    Hi there BigDogg795,
    I would recommend taking a look at the troubleshooting steps for iMessage found in the article below. 
    iOS: Troubleshooting Messages - Apple Support
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    -Griff W.

  • Issues with WebForm performance

    Hi,
    We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
    After login, the first form you open it is
    always slow. After this you can switch from one form to another without a
    delay.
    Then once you change any data – the next time
    you access a form it gets delayed.
    The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
    The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
    runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
    Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
    <Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
    EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
    Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
    Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
    BPMUI shared webapp not referenced from PLANNING#11.1.2.0
    Application name: PLANNING#11.1.2.0
    Application source: HyperionPlanning.ear
    Server name: Planning0
    Server port: 8300
    Server SSL port: 8343
    Application context: HyperionPlanning
    Registry product type: PLANNING_PRODUCT
    Registry physical web application type: PLANNING_WEBAPP
    weblogic.Name property is 'Planning0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for PLANNING#11.1.2.0
    EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for PLANNING#11.1.2.0
    loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    Planning locale: en_US
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Thu Mar 21 21:12:27 CET 2002,
                   To: Tue Mar 22 21:12:27 CET 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
    EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
    using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
    Seeking ESAPI.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
    Loaded 'ESAPI.properties' properties file
    Seeking validation.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
    Loaded 'validation.properties' properties file
    Seeking antisamy-esapi.xml
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
    EnterData_Inner Processing Time:424
    2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    EnterData_Inner Processing Time:64
    EnterData_Inner Processing Time:15
    EnterData_Inner Processing Time:359
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:53
    EnterData_Inner Processing Time:4
    EnterData_Inner Processing Time:7
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Setting HBR Mode to: 2
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    HBR LWA Component = Default
    Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
    In getDBDetails()
    Found HBR product = ESSBASE_PRODUCT
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    =2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
    - Error retrieving user by identity
    Embedded HBR initialized.
    EnterData_Inner Processing Time:6
    EnterData_Inner Processing Time:867
    [Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
    EnterData_Inner Processing Time:7
    2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    EnterData_Inner Processing Time:44
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:525
    EnterData_Inner Processing Time:1
    Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

    I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
    So I'll try replying in here instead:
    I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
    I'm using MOTODEV SDK platform, A1200 model (motorola).

  • Issues with using 3 monitors on 2 external gpu

    Hi,
    I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
    1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
    lspci |grep VGA:
    03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    xrandr:
    Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
    DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
    Section "ServerLayout"
    Identifier "X.org Configured"
    #Screen 0 "Screen0" 0 0
    #Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    Option "Monitor-DVI-I-1" "DVI-I-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "DELL"
    Option "Monitor-DP-1" "DP-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "DELL"
    Option "Monitor-DP-1-2" "DP-1-2"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:3:0:0"
    Option "Monitor-DVI-I-1"
    Option "Monitor-DP-1"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:34:0:0"
    Option "Monitor-DP-1-2"
    EndSection
    Xorg log (I can see that monitor at time 1767.316):
    [ 1766.959]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1766.960] X Protocol Version 11, Revision 0
    [ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
    [ 1766.961] Build Date: 13 December 2013 03:11:42PM
    [ 1766.962]
    [ 1766.962] Current version of pixman: 0.32.4
    [ 1766.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
    [ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
    [ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1766.966] (==) ServerLayout "X.org Configured"
    [ 1766.966] (==) No screen section available. Using defaults.
    [ 1766.966] (**) |-->Screen "Default Screen Section" (0)
    [ 1766.966] (**) | |-->Monitor "<default monitor>"
    [ 1766.966] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1766.966] (**) | |-->Device "Card0"
    [ 1766.966] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1766.966] (**) |-->Input Device "Mouse0"
    [ 1766.966] (**) |-->Input Device "Keyboard0"
    [ 1766.966] (==) Automatically adding devices
    [ 1766.966] (==) Automatically enabling devices
    [ 1766.966] (==) Automatically adding GPU devices
    [ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1766.967] (WW) Disabling Mouse0
    [ 1766.967] (WW) Disabling Keyboard0
    [ 1766.967] (II) Loader magic: 0x7fec20
    [ 1766.967] (II) Module ABI versions:
    [ 1766.967] X.Org ANSI C Emulation: 0.4
    [ 1766.967] X.Org Video Driver: 14.1
    [ 1766.967] X.Org XInput driver : 19.1
    [ 1766.967] X.Org Server Extension : 7.0
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
    [ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
    [ 1767.169] Initializing built-in extension Generic Event Extension
    [ 1767.170] Initializing built-in extension SHAPE
    [ 1767.170] Initializing built-in extension MIT-SHM
    [ 1767.170] Initializing built-in extension XInputExtension
    [ 1767.171] Initializing built-in extension XTEST
    [ 1767.171] Initializing built-in extension BIG-REQUESTS
    [ 1767.172] Initializing built-in extension SYNC
    [ 1767.172] Initializing built-in extension XKEYBOARD
    [ 1767.172] Initializing built-in extension XC-MISC
    [ 1767.173] Initializing built-in extension SECURITY
    [ 1767.173] Initializing built-in extension XINERAMA
    [ 1767.174] Initializing built-in extension XFIXES
    [ 1767.174] Initializing built-in extension RENDER
    [ 1767.174] Initializing built-in extension RANDR
    [ 1767.175] Initializing built-in extension COMPOSITE
    [ 1767.175] Initializing built-in extension DAMAGE
    [ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1767.176] Initializing built-in extension DOUBLE-BUFFER
    [ 1767.176] Initializing built-in extension RECORD
    [ 1767.176] Initializing built-in extension DPMS
    [ 1767.177] Initializing built-in extension X-Resource
    [ 1767.177] Initializing built-in extension XVideo
    [ 1767.177] Initializing built-in extension XVideo-MotionCompensation
    [ 1767.178] Initializing built-in extension XFree86-VidModeExtension
    [ 1767.178] Initializing built-in extension XFree86-DGA
    [ 1767.178] Initializing built-in extension XFree86-DRI
    [ 1767.179] Initializing built-in extension DRI2
    [ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1767.179] (II) LoadModule: "glx"
    [ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1767.179] (II) Module glx: vendor="X.Org Foundation"
    [ 1767.179] compiled for 1.14.5, module version = 1.0.0
    [ 1767.179] ABI class: X.Org Server Extension, version 7.0
    [ 1767.179] (==) AIGLX enabled
    [ 1767.180] Loading extension GLX
    [ 1767.180] (II) LoadModule: "nouveau"
    [ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1767.180] compiled for 1.14.4, module version = 1.0.10
    [ 1767.180] Module class: X.Org Video Driver
    [ 1767.180] ABI class: X.Org Video Driver, version 14.1
    [ 1767.180] (II) NOUVEAU driver
    [ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1767.180] RIVA TNT (NV04)
    [ 1767.180] RIVA TNT2 (NV05)
    [ 1767.180] GeForce 256 (NV10)
    [ 1767.180] GeForce 2 (NV11, NV15)
    [ 1767.180] GeForce 4MX (NV17, NV18)
    [ 1767.180] GeForce 3 (NV20)
    [ 1767.180] GeForce 4Ti (NV25, NV28)
    [ 1767.180] GeForce FX (NV3x)
    [ 1767.180] GeForce 6 (NV4x)
    [ 1767.180] GeForce 7 (G7x)
    [ 1767.180] GeForce 8 (G8x)
    [ 1767.180] GeForce GTX 200 (NVA0)
    [ 1767.180] GeForce GTX 400 (NVC0)
    [ 1767.180] (--) using VT number 3
    [ 1767.182] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) Loading sub module "dri2"
    [ 1767.183] (II) LoadModule: "dri2"
    [ 1767.183] (II) Module "dri2" already built-in
    [ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
    [ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1767.183] (==) NOUVEAU(0): RGB weight 888
    [ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1767.183] (==) NOUVEAU(0): Using HW cursor
    [ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1767.183] (==) NOUVEAU(0): Page flipping enabled
    [ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
    [ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1767.265] (II) NOUVEAU(0): Digital Display Input
    [ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.265] (II) NOUVEAU(0): Supported established timings:
    [ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.265] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
    [ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.265] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
    [ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
    [ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
    [ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
    [ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
    [ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
    [ 1767.273] (II) NOUVEAU(0): Digital Display Input
    [ 1767.273] (II) NOUVEAU(0): 8 bits per channel
    [ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
    [ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.273] (II) NOUVEAU(0): Supported established timings:
    [ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.273] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
    [ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.273] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
    [ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
    [ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
    [ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
    [ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
    [ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1767.274] (II) Loading sub module "fb"
    [ 1767.274] (II) LoadModule: "fb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.274] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "exa"
    [ 1767.274] (II) LoadModule: "exa"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.274] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 2.6.0
    [ 1767.274] ABI class: X.Org Video Driver, version 14.1
    [ 1767.274] (II) Loading sub module "shadowfb"
    [ 1767.274] (II) LoadModule: "shadowfb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "dri2"
    [ 1767.274] (II) LoadModule: "dri2"
    [ 1767.274] (II) Module "dri2" already built-in
    [ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
    [ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1767.275] (==) NOUVEAU(G0): RGB weight 888
    [ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1767.275] (==) NOUVEAU(G0): Using HW cursor
    [ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
    [ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
    [ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
    [ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
    [ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
    [ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
    [ 1767.347] (II) NOUVEAU(G0): Digital Display Input
    [ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
    [ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
    [ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
    [ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
    [ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.347] (II) NOUVEAU(G0): Supported established timings:
    [ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
    [ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
    [ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
    [ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
    [ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
    [ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
    [ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
    [ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
    [ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
    [ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
    [ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
    [ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
    [ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1767.348] (II) Loading sub module "fb"
    [ 1767.348] (II) LoadModule: "fb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.348] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (II) Loading sub module "exa"
    [ 1767.348] (II) LoadModule: "exa"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.348] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 2.6.0
    [ 1767.348] ABI class: X.Org Video Driver, version 14.1
    [ 1767.348] (II) Loading sub module "shadowfb"
    [ 1767.348] (II) LoadModule: "shadowfb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (--) Depth 24 pixmap format is 32 bpp
    [ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1767.360] (II) EXA(256): Driver registered support for the following operations:
    [ 1767.360] (II) Solid
    [ 1767.360] (II) Copy
    [ 1767.360] (II) Composite (RENDER acceleration)
    [ 1767.360] (II) UploadToScreen
    [ 1767.360] (II) DownloadFromScreen
    [ 1767.360] (==) NOUVEAU(G0): Backing store disabled
    [ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1767.360] (==) NOUVEAU(G0): DPMS enabled
    [ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
    [ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1767.366] (II) EXA(0): Driver registered support for the following operations:
    [ 1767.366] (II) Solid
    [ 1767.366] (II) Copy
    [ 1767.366] (II) Composite (RENDER acceleration)
    [ 1767.366] (II) UploadToScreen
    [ 1767.366] (II) DownloadFromScreen
    [ 1767.366] (==) NOUVEAU(0): Backing store disabled
    [ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1767.366] (==) NOUVEAU(0): DPMS enabled
    [ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.366] (--) RandR disabled
    [ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1767.389] (II) AIGLX: Loaded and initialized nouveau
    [ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1767.444] resize called 1920 1080
    [ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.479] (II) LoadModule: "evdev"
    [ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
    [ 1767.479] compiled for 1.14.3, module version = 2.8.2
    [ 1767.479] Module class: X.Org XInput Driver
    [ 1767.479] ABI class: X.Org XInput driver, version 19.1
    [ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.479] (**) Power Button: always reports core events
    [ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.479] (--) evdev: Power Button: Found keys
    [ 1767.479] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1767.479] (**) Option "xkb_rules" "evdev"
    [ 1767.479] (**) Option "xkb_model" "pc104"
    [ 1767.479] (**) Option "xkb_layout" "us"
    [ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.500] (**) Power Button: always reports core events
    [ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.500] (--) evdev: Power Button: Found keys
    [ 1767.500] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
    [ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1767.500] (**) Option "xkb_rules" "evdev"
    [ 1767.500] (**) Option "xkb_model" "pc104"
    [ 1767.500] (**) Option "xkb_layout" "us"
    [ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
    [ 1767.502] (II) No input driver specified, ignoring this device.
    [ 1767.502] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
    [ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
    [ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
    [ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
    [ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
    [ 1767.502] (**) Option "xkb_rules" "evdev"
    [ 1767.502] (**) Option "xkb_model" "pc104"
    [ 1767.502] (**) Option "xkb_layout" "us"
    [ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
    [ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
    [ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    [ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 1767.504] (**) Option "xkb_rules" "evdev"
    [ 1767.504] (**) Option "xkb_model" "pc104"
    [ 1767.504] (**) Option "xkb_layout" "us"
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
    [ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 1767.505] (**) PS/2 Generic Mouse: always reports core events
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
    [ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1780.500] Error dropping master: -22(Invalid argument)
    [ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
    [ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
    [ 1780.503] (EE) Server terminated successfully (0). Closing log file.
    Thanks for any help!

    I have  a similar issue except with two ATI cards and four monitors.
    I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
    I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
    lspci:
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    My xorg.conf:
    Section "Device"
    Identifier "ATI0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI1"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "ATI2"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI3"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-3"
    Screen 1
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "On"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-2"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-3"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "ATI0"
    Monitor "DVI-0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "ATI1"
    Monitor "DVI-1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "ATI2"
    Monitor "DVI-2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "ATI3"
    Monitor "DVI-3"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen0" 0 0
    Screen "Screen1" RightOf "Screen0"
    Screen "Screen2" Above "Screen1"
    Screen "Screen3" Above "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
    I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
    xrandr --listproviders show the two cards as well.
    Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
    "xrandr --setprovideroutputsource 0 1" just plain crashes X

Maybe you are looking for