Hdmi cable will not work on ipad1

Have ipad1 with apple hdmi connector & 25' hdmi cable iOS on ipad1 is 5.1.1 will not connect
Anyone else have this issue?

There is no HDMI support on iPad 1
You need to use one these
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
OR
http://www.amazon.com/EZOPower-Component-Micro-USB-iPhone-Classic/dp/B008FHK75S/ ref=sr_1_10?ie=UTF8&qid=1373689248&sr=8-10&keywords=Apple+iPad+component+AV+cabl e
http://www.amazon.com/RF-AP301-30-Pin-Component-AV-USB/dp/B005G5ONMA/ref=sr_1_5? ie=UTF8&qid=1373689248&sr=8-5&keywords=Apple+iPad+component+AV+cable
Good Luck!

Similar Messages

  • My TV video/audio cable will not work since the upgrade. Only get audio on TV.

    My TV video/audio accessoriy cable will not work after the iOS5 upgrade. Only the audio goes through to the TV. Any solutions?

    no answer

  • My auxiliary cable will not work with my ipod touch

    Will someone please help?  My auxiliary cable will not fit my ipod touch.  I am trying to hook it up to my stereo.  My ipod 4th generation fit just right.

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • 15 inch Macbook pro Retina HDMI port will not work

    One day it was working fine then all of a sudden the screen when blank and i have not been able to get it to work since.  I use to plug the HDMI cable from my MAC to my TV now there is no acknowledgement on my tv and my MAC will not detect that a cable has been connected like it use to.  Please help.

    If available, try connecting to another TV, try another cable and/or another Mac.  An appointment at an Apple store genius bar can determine if the fault lies with the MBP.  There is no software solution in this case.
    Ciao.

  • HDMI cables do not work on my AppleTV

    i tried connecting my apple tv to my Marantz projector via HDMI cable, and its not finding it. it just says "signal not found." my component cables work just fine on it, but no-go on HDMI. and i know the HDMI cable works fine because i've used it on my PS3 and Xbox 360. i've read a few threads that talk about 1.3 or 2.0 HDMI cables, or using an HDMI switch, but before i spend money on either (which could possibly be expensive) i would rather know how to fix it. can anyone help me?

    like i said, everything seems fine because my blu-ray and HD DVD players both work fine, and they use regular HDMI cables

  • Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

    I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day -  and now all are pretty much worthless with the iPad (4th gen.)
    The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
    I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
    RIDICULOUS!

    There are only other users here.
    Let Apple know by posting at http://www.apple.com/feedback/ipad.html

  • After 5.1 install my video out cable will not work. Message says it is not supported! Any fixes?

    After installing OS5.1 my video out cable stopped working. Message says it iis not supported! Any fixes. I re booted but didn't help.

    Tried cleaning the connector with electronics spray and then spray air but didn't help. I get no audio or video, just the message that the accessory is not supported.

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • HT3231 transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter.  This will not work, do i need a different cable?

    I have a G4 with system 10.4.11 and a 6 pin firewire trying to transfer files to my new iMac system 10.8.3, 9 pin firewire. Apple sold me FireWire 9-6 with a Thunderbolt to FireWire Adapter.  This will not work, do i need a different cable?

    Apple Thunderbolt to FireWire Adapter
    Then it sounds like the FW800 to 400 adapter just gets in the way. You don't have FW800 case? on my MDD G4 I added and used FW800 controller and cases from OWC and Sonnet.
    http://www.macsales.com/firewire

  • HT5706 After the update the Apple TV will not work -  It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why -  Message do not update if it works

    After the update to the Apple TV, it will not work -  It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why - 
    Message to users is, do not update if it works.  This product apparently was not tested very well

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    If when you choose restore you get a message that the device cannot be found, download the file below
    Apple TV Software Restore 5.1.1 (2nd generation)
    Apple TV Software Restore 5.1.1 (3rd generation)
    Then hold down the option key while choosing restore and select the downloaded file when prompted.

  • Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

  • HT1766 My Ipad shows a USB cable and Itunes logo. My Ipad will not work

    My Ipadshows a Itunes logo and A picture of a USB cable and will not work. What do I do?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

    Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
    It has only happened for the last month or so
    Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

    Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

  • Qosmio X500 and HDMI output does not work automatically

    Sorry for my english..
    Good morning.
    I have a Qosmio x500 recently that runs on Windows 8.1
    Previously, when I plugged in a hdmi cable from the PC to the TV, I had ( Samsung TV ), after a beep on the PC , automatically binding and made ??the TV is lit ( if it was in standby).
    I could even control the PC with the TV remote control, put a movie , pause, etc.. Super convenient!
    Source indicated on the TV Anynet + Toshiba pc.
    And when I commutais with the TV remote control on TV, the PC screen is lit .
    Off, despite repeated attempts with at least 5 software (drivers ?) Different Toshiba certified HDMI, I do not have it and I have to manually switch to see the PC on the TV (choose HDMI source on the TV) .
    HDMICtrlMan is a folder where after installation, there are:
    ChangeOutput.exe
    HCMSoundChanger.exe
    HDMICtrlCfg.exe
    HDMICtrlMan.exe
    But nothing works !
    I also updated the video and audio driver: gforce gts 360m
    But now I hold!
    And I do not know the logical progression of the computer when you plug an HDMI cable (totally depends on the graphics chip ?).
    If someone has an idea or experience of this problem, thank you in advance

    >The problem is that with the drivers windows 7 64 bit, HDMI worked.
    The problem is that you changed to a Windows system which is NOT supported on this notebook.
    Of course you can use Windows 8.1 on this Qosmio X500 model but this does not mean that all notebook features would work properly.
    Windows 8.1 is completely different and many Windows 7 tools and utilities are not compatible with Win 8.1
    I dont know if this will help you but the Windows 8.1 Toshiba System Driver is very important software when in comes to use Windows 8.1 on Toshiba notebooks.
    Try to install this Windows 8.1 Toshiba System Driver released for Qosmio X870/875 series.
    But if this will not work, I dont see any other possible solutions.
    Either you will give up the Windows 8.1 and will switch back to supported Win 7 or you would use Win 8.1 but without the automatic HDMI support.

Maybe you are looking for