HDMI output not working with AT200 under ICS

Hello
The HDMI output of my tablet AT200 doesn't work with any TV set.
My AT 200 tablet is under ICS.
I tried both HDMI configurations : full screen and video window. No effect at all.
I have red the post of denis48 and the response of MasterG and tried his propositions with no success
Is there somebody to help me please ?

Hi
I think you meant this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67654
The output should work as its described in the posting.
If it does not work, reset the tablet settings and try again

Similar Messages

  • HDMI output not working with AT 200 under ICS

    Hello,
    I connected the HDMI output to a Sony KDL 32 E 5500. It simply does not work.
    The same TV HDMI input works fine with a DVD player.
    The AT 200 tablet is under ICS (upgrade in France).
    I tried both HDMI configurations : full screen and video window.
    Should I send it back for repair ?

    Hi
    There are two outputs: Mirror and video area only.
    Mirror:
    External device copies the image on the tablet screen
    Video area only:
    The external display device shows the playback when open a multimedia
    But You should firstly check the Android Settings:
    Under the option Screen you will find the option HDMIO video mode
    Tap this to switch between the HDMI video output mode.
    You could also try to connect the HDMI device under following conditions:
    - Tablet is turned on
    - Tablet is completely turned off
    - when you connect TV or external monitor to HDMI port, then display output is set to HDMI
    - when you plug and replug the cable, wait at least 5 sec before you replug the HDMI cable.

  • HDMI output not working since firmware upgrade

    I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
    Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
    Any troubleshooting suggestions would be appreciated.

    Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
    Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
    - SD Card: total space - 5.43GB; Available space - 5.43GB
    - Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
    - System storage: Total Space - .97 GB; Available space - .59GB
    In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

  • HDMI output not working on Compaq Presario CQ60-430sa

    Install the driver below....
    http://forums.laptopvideo2go.com/topic/25059-v18644-windows-7vista-64bit-nvidia/
    Any driver beyond this does not work with HMDI output.
    Worked for me after 3 months of trying anyway!

    When you press FN+F5 key combination while notebook is not connected with HDMI cable, you will see one option (LCD) only. When you connect HDMI cable can you see other additional options like LCD, LCD+HDMI, HDMI and so on?
    Please be also sure that right HDMI port on your TV is enabled.
    By the way: which OS do you use?

  • E520 - HDMI Output not working on Samsung TV - although works on other devices

    Laptop does not recognise TV
    I know there are a number of threads with similar questions, I have been through a number of them, however have not come across a solution that works.
    I have a ThinkPad E520 running Windows 8.1 Enterprise Edition x64
    The Laptop has two Graphics adapters
    Intel HD Graphics 3000 (Drive - 9.17.10.2867) - I have recently reverted back from the latest Intel driver to the latest Lenovo
    AMD Radeon 6600M and 6700M Series (Driver - 13.251.9001.1001) - latest on AMD website
    The TV is a Samsung 5 Series 5200 58 inch
    We use the TV at work for presentations and demo etc
    At my desk extend my desktop to a Philips monitor via HDMI and have no problems at all, I also using with HD TV at home, so HDMI port is ok.  Other laptops us the TV fine, so nothing wrong there either.
    Things I have tried
    The obvious 'Windows key + P' extended, duplicated, restarted and tried again
    Did the same as above using screen resolution page - TV is not detected, tried hitting detect - nothing
    Disabling AMD adapter
    Uninstalling Intel HD and reinstalling latest INTEL drivers with HDMI output plugged in
    Uninstalling Intel HD and reinstalling latest LENOVO drivers with HDMI output plugged in (as suggested in other posts)
    Tried different HDMI cables, using HDMI input 1 and 2 in the TV
    Initially you may think its the TV, however we have a number of Lenovo E530's they all work, the problem only exists with the E520's with the switchable graphics.
    Any help would be greatly appreciated.
    Dave

    Hi- its working now.  The problem is that all your contacts needs to update Skype and have the latest version and then bingo - it works.  Its fab now.
    Problem solved and set for Christmas call around.
    Merry Christmas everyone

  • HDMI output not working on HP Pavilion 15

    Hi guys, i am new here on HP Forum.
    My problems started when i got my new laptop and i HATED windows 8.
    So a friend of mine had a disc with Windows 7 on it.
    After the installation nothing worked, Not wlan, USB, HDMI and so on,
    I serched for days for new drivers and found the most of them on HPs site.
    But i have not been abled to find any working driver for my HDMI output.
    Can you guys help me with that?
    // Jesper Forsberg - Sweden
    This question was solved.
    View Solution.

    Hi:
    The only suggestion I can offer would be to try the graphics driver from AMD if you have not already done so.
    Your notebook is not supported by HP for W7, and especially not supported for 32 bit operating systems.
    http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2032
    As a last resort, try manually installing the W7 x64 graphics driver from your notebook's support and driver page (sp66999).
    I explored the driver folder, and there are 32 bit drivers included in that file.

  • HDMI Output Not Working on Lenovo B540

    Yesterday morning the HDMI output on the back of our Lenovo B540 stopped working all of a sudden. I have a projector as a secondary monitor that I use for media applications which connects via a SVGA to HDMI converter which has worked flawlessly for months until yesterday.  My first inclination was the converter but after some troubleshooting I have determined that the issue is somewhere in the Lenovo AIO system.  Below are the steps I followed to make my determination:
    1. Tried connecting Lenovo to another known-good monitor and nothing.  The display property picks up the monitor's attributes like make and model and even resolution but no display.
    2. Plugged projector into another computer WITHOUT converter and it WORKED.
    3. Plugged in project into the same computer that I used in step 2 above WITH converter and it still WORKED.
    Steps taken to resolve (without success yet):
    1. Updated Intel HD Graphics display driver to 10.18
    2. Installed latest graphics chipset update from another forum post I found suggesting that might be the issue.
    3. Changing "Source Select" from bottom right hand corner of system (icon with arrows forming circle) but it ONLY shows "PC" option.  Not sure if that's the issue or not, but wanted to mention it.
    My next step is to completely uninstall the display driver and try seeing if second monitor shows display.
    My last step which I would like to avoid if all possible is a factory reset as I have many applications installed that I would like to avoid reinstalling if at all possible.
    Any further assistance with this issue would be greatly appreciated.  I feel like it's a driver/configuration issue, but I'm not finding it  yet.

    I wanted to reply that I just discovered that my Lenovo AIO no longer likes my converter.  I'm not sure why as I have proven that it works by using it on another device.  The other device is a laptop running Windows 7 Pro.
    On a haunch, I plugged in my HDMI TV which has a native HDMI connection and it WORKED.  So, I suppose I'm back to the drawing board and this is indeed not a Lenovo hardware issue.
    Does anyone know of any issues with using a HDMI to VGA converter on a Lenovo B540 AIO?  Link below:
    http://www.startech.com/AV/Converters/Video/HDMI-t​o-VGA-Adapter-Converter-for-Desktop-PC-Laptop-Ultr​...
    I have the one above but I just noticed there is a HD2VGAE which I'm not sure what the difference is.
    Thanks!

  • HDMI output not working on my Satellite L500

    The HDMI output on my Satellite L500 seems to have stopped working in the past few months.
    I've tried different cables but it is still not working.
    Any ideas?

    When you press FN+F5 key combination while notebook is not connected with HDMI cable, you will see one option (LCD) only. When you connect HDMI cable can you see other additional options like LCD, LCD+HDMI, HDMI and so on?
    Please be also sure that right HDMI port on your TV is enabled.
    By the way: which OS do you use?

  • Satellite C855D-S5237 Laptop HDMI Output Not Working

    Hi, I have a Toshiba Satellite C855D-S5237 Laptop and the HDMI Output is no longer working on my Toshiba TV. The TV does not recognize that anything is connected and the laptop doesn't recognize the TV as a display option. I have used this laptop many times in the past to connect to my TV with an HDMI cable and it worked fine. It has been a few months since I tried it but it is no longer working. Any ideas as to what could be the problem? Thanks

    Hi! What do you show here. Also,do you have any yellow marks in Device Manager.
    http://forums.toshiba.com/t5/Video-Display/HDMI-not-working/td-p/329808
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture48.JPG ‏128 KB

  • HDMI Output not work on Encore Tablet

    Hi guys,
    First post and a new user of the Toshiba Encore.
    Some background - I had a faulty Encore previously, but it would connect to my HDMI screen. The replacement, now 3 weeks old, works perfectly, except yesterday I tried HDMI out for sound (to an HDMI amplifier) but nothing. And then I decided to see if it would do HDMI out video - and nothing.
    I plugged in the same cable that worked on the faulty tablet and to the same screen. I hit the devices charm and duplicated (and even tried extending) the screen. Nothing. I tried both HDMI ports on the screen. Nothing.
    The last (faulty) tablet would make the sound that a new device was installed when I plugged HDMI in. This one makes no sounds. It's like the HDMI port isn't connected at all.
    What advice would you give? I have downloaded all BIOS and Windows updates. I used the Intel update tool and everything is current. So what could I try to troubleshoot to get this to go?
    Will happily provide more info if needed.
    Cheers

    This HDMI connection still does not work. It only shows on the TV not on both. I have spoken to Toshiba Software and they have a fix which are some special tools at a one off charge of £84. They say the problem is to do with the HDMI only sending at 30 Hz and the TV being at 60Hz. They also say the fix will provide mirroring as the resolution of the TV and Encore are not compatible. As I only paid £177 for Encore I am reluctant to pay such a high amount. They also advised that you must be connected with the mains adaptor because the battery is not powerful enough to sustain the signal. My laptop works fine and I have a new HDMI cable for Encore.
    Any further thoughts? 

  • Lightning HDMI Adapter not working with iOS 6.1.2

    I have an iPhone 5 which was updated from 6.0.2 to 6.1.2 recently and the Lightning HDMI adapter stopped working altogether for video mirroring; was wondering if anyone has the same situation/any solution for this?
    I also have an iPad retina generation which is at 6.1.2, and the Lightning HDMI adapter is not working for it as well.
    I've tried replacing HDMI cables, rebooting the iPhone with the cable plugged in, and plugging out/in several times with the charger in/out. The adapter works, cause when I plug it in; I see the top bar flash for a bit... but no dice on the video mirroring to my TV.

    I also have this problem and am very unhappy with the way Apple is handling it. Called today to enquire on when the fix will be available and was told it is a software issue that could be fixed if we paid $35.00 to talked through process on the phone. Highly disappointed with Apple, why should it cost me money for them to fix there own issue. Since they are aware of the issue the least they can do it posted the information for the fix online @ no charge.
    If I wanted crap service I could have gotten a phone from anyone. Reconsidering purchasing a 5 on next upgrade.

  • HDMI output not working after Windows 8.1 update

    I am using an Envy TouchSmart 15 and I have just run an update of Windows 8.1 based on the system auto update (it ran 5 updates). Prior to the update, I used a 27" monitor as the main screen and this was connected via the HDMI port.  Right after the update, the system doesn't seem to recognise the HDMI port anymore and it goes back to using the Envy laptop screen as the main screen.  I changed the HDMI cable but it made no difference.  I subsequently connected another laptop to the 27" monitor via HDMI and it worked fine.  So it appears both the monitor and the HDMI cable are fine. Please can you help ? 

    Hey yawbus,
    I would first like to welcome you to the HP Forums!
    Thank you for sharing the troubleshooting steps that you have done already, and I will say you are correct that the issue is not with the HDMI Cable, or the 27" monitor. From what you have described in your post, it does sound as though the issue is with the drivers, possibly a conflict.
    I would like to start of with installing the original video drivers that came with your notebook. I have included the document 'Using Recovery Manager to Restore Software and Drivers (Windows 8)'. Please follow through the steps for just reinstalling the original video drivers. After the original drivers have been installed, please restart your computer.
    Now once the computer has restarted, you will need to install any updates that are available for both HP, and Windows. You can install both of these through the HP Support Assistant. I have included the document 'Using HP Support Assistant (Windows 8)'. Scroll down the page about halfway, and you should see an option for Updates and tune-ups. Please follow the options for HP updates, and Windows updates.
    If you are still experiencing the same issue after the above troubleshooting steps, please let me know the full model number of your Envy TouchSmart 15. I have included the document 'Guide to finding your product number'. As well, please confirm the current version of Windows that you are running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
    Looking forward to your reply!

  • HDMI output not working MACBOOK Pro (Oct 2014)

    I am trying to get another screen connected to my MBP, I have tried numerous screens and cables to achieve this, but I can not get it to work.
    Is there a on/off or disable HDMI output on the MBP?
    I have used various screen, which i know work. And a HDMI to DVI and HDMI to HDMI cables to screens . I know the cable and screens work as I use them at work on a daily basis.
    All I get is "No signal connected".
    Is there any diagnostics or tests I can do?
    Regards,
    Rowland

    I have a 13" MacBook Pro.

  • Camera not working with Facetime under iOS7

    Hello,
    My front camera doesn't work since upgrading my iPhone 4S to iOS7.  The image is not clear (I just see my shadow)
    It was working perfectly under iOS 6.1.4
    The front camera is working with other apps like Skype and I can take picture with Camera' app.
    I have an iPad and there Facetime works correctly.
    Does anyone has the same problem ?
    Soft or hardware problem ?
    Many thanks for your help.
    Kind regards,
    Sébastien

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • IPhone 4 will not work with anything under 10.5.8?

    Is there anyway iPhone 4 will work with 10.4.11 OS? Or do I have to update my OS from Tiger to Leopard?

    Or do I have to update my OS from Tiger to Leopard?
    You can go directly to Snow Leopard for $29.00
    <http://store.apple.com/us/product/MACOS_XSNGL>
    You can skip Leopard.

Maybe you are looking for

  • Issue while creating a prolog. (Urgent)

    Hi all, I am using DBMS_XMLGEN package to create an xml from a sql resultset. This resultset will be transformed using an xsl to xml. The snippet of code looks following lv_context_handle := DBMS_XMLGEN.newContext(lv_sql_data); -- Sets the name of th

  • Formatting system date in list format

    Dear all, in building a list format I need to format the system date, coming from the '@{currentDateODBC}{}' function. It comes as YYYY-MM-DD, while I need DD/MM/YYYY. Anybody knows how to do it? thank you in advance Arnaldo

  • Generate Distribution Model ERP = EWM

    HI I am performing Generate Distribution Model ERP => EWM for new WH. Getting below error message. Method BUS2015.SAVEREPLICA exists in model view WMS Message no. BDDISTMODEL051 Please Help to resolve as early Rgds Dinesh.P

  • Help needed :How to Supress Standard pop-up messages in an ABAP program ???

    Hi All, A particular function module i use in my program gives pop ups with information messages when the program runs.  There is not returning parameter which throws this message.This is not desirable.  Is there a way to supress these pop ups? Regar

  • Back up nokia X3

    Hi, I got a serious problem, a have an update software from nokia so before i make a buckup from my phone : contact and all the other things. Then I started hte update and now when I want to put back all my contactlist the phone starting up automatic