HDTV as second monitor?
Will OS X use an HDTV as a second monitor? I'm thinking of running Mini-DVI from MacBook to a DVI<->HDMI cable, and from there into the HDMI port of the TV. Any reason this wouldn't work?
Samuel Brown wrote:
Will OS X use an HDTV as a second monitor? I'm thinking of running Mini-DVI from MacBook to a DVI<->HDMI cable, and from there into the HDMI port of the TV. Any reason this wouldn't work?
Welcome to Apple Discussions:
It works fine - not only as a second monitor, but optionally as a desktop extension of the computer monitor, doubling the desktop space. The settings are in the display preferences when the HDTV is connected.
Similar Messages
-
DVI- HDMI discoloration on HDTV (as second monitor)
Hello all.
I have been having some issues when using my Philips CRT 30" 1080i HDTV as a second monitor via a DVI->HDMI cable. There seems to be a discoloration that occurs (my best guess being a "green" discoloration) that occurs in the top left corner of the screen. It is made all the more apparent when you then unplug, and a purple haze is left in the corner of the "blue" video input channel. (i imagine the green discoloration on the blue channel yields purple).
From what I can tell, this problem does not occur on any other video input (say, a Wii on the composite channel, or an XBOX on the component, etc).
I had heard rumblings that it could be, in order of bad to worst: a bad HDMI cable, a bad HDMI input on the television, or the television going bad period.
Wanted to know if any of you have had or heard of similar experiences. Need to decide soon if I'm going to had to just buy a new HDMI cable, or if I need to buy a new television/monitor for a job coming up.
Thanks in advance!
Brian
4/30/10 2:47 PM
Hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Sudden Motion Sensor:
State: Enabled
Network:
Bluetooth DUN:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
Service Order: 0
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
Service Order: 1
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
Service Order: 2
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
Has IP Assigned: Yes
Service Order: 3
Software:
System Software Overview:
System Version: Mac OS X 10.6.3 (10D573)
Kernel Version: Darwin 10.3.0
64-bit Kernel and Extensions: No
Time since boot: 12 minutes
ATA:
ATA Bus:
MATSHITADVD-R UJ-857E:
Model: MATSHITADVD-R UJ-857E
Revision: ZA0E
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Power Off: Yes
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x106B00A0
Audio ID: 44
Available Devices:
Speaker:
Connection: Internal
Headphone:
Connection: Combo
Internal Microphone:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.3.1f4
Hardware Settings:
Vendor ID: 0x5ac
Product ID: 0x8205
Devices (Paired, Favorites, etc):
Device:
Type: Mouse
Firmware Version: 0x200
Services: Mighty Mouse
Manufacturer: Broadcom (0x2, 0x314)
Vendor ID: 0x5ac
Product ID: 0x30c
Diagnostics:
Power On Self-Test:
Last Run: 4/30/10 2:35 PM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh
Ethernet Cards:
pci168c,24:
Type: Other Network Controller
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
BSD name: en1
Kext name: AirPortAtheros.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
Version: 422.19.10
Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x11ab
Device ID: 0x436a
Subsystem Vendor ID: 0x11ab
Subsystem ID: 0x00ba
Revision ID: 0x0013
Link Width: x1
BSD name: en0
Kext name: AppleYukon2.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2 .kext
Version: 3.1.14b1
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
G-Drive mini Device 00:
Manufacturer: G-TECH
Model: 0x0
GUID: 0x1C0D02E00B0A3E
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
G-Drive mini Device 00 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x103
Product Revision Level: FBEO
Sub-units:
G-Drive mini Device 00 SBP-LUN:
Capacity: 250.06 GB (250,059,350,016 bytes)
Removable Media: Yes
BSD Name: disk1
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
disk1s3:
Capacity: 249.93 GB (249,925,091,328 bytes)
Available: 21.68 GB (21,684,412,416 bytes)
Writable: Yes
File System: Journaled HFS+
Graphics/Displays:
NVIDIA GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3175
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected
Memory:
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
BANK 1/DIMM1:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
PCI Cards:
pci168c,24:
Type: Other Network Controller
Driver Installed: Yes
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
Link Speed: 2.5 GT/s
Serial-ATA:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Link Speed: 1.5 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
FUJITSU MHW2160BHPL:
Capacity: 160.04 GB (160,041,885,696 bytes)
Model: FUJITSU MHW2160BHPL
Revision: 0081001C
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s2:
Capacity: 131.94 GB (131,936,026,624 bytes)
Available: 23.73 GB (23,733,391,360 bytes)
Writable: Yes
File System: Journaled HFS+
disk0s3:
Capacity: 27.63 GB (27,626,639,360 bytes)
Available: 13.65 GB (13,652,635,648 bytes)
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x2836
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Product ID: 0x8502
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.45
Serial Number: 607F59A99AB2811A (03.00)
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 500
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x283a
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfa
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2835
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3a
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2834
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1a
Bluetooth USB Host Controller:
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Inc.)
Version: 19.65
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2830
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2831
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2832
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x5d
Apple Internal Keyboard / Trackpad:
Product ID: 0x021a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Location ID: 0x5d200000
Current Available (mA): 500
Current Required (mA): 40
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0x5d100000
Current Available (mA): 500
Current Required (mA): 100
AirPort:
Software Versions:
Menu Extra: 6.2.1 (621.1)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x87)
Firmware Version: Atheros 5416: 2.0.19.10
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status: ConnectedProblems like that are caused by stray magnetism that cause misalignment of the electron beams from landing on the proper phosphor color. The set itself has a demagnetizer, but sometimes the magnetism is too strong for the built-in demagnetizer to overcome. But calling in a TV repair person to do a demagnetization is, I'm afraid, a throw back to bygone days. But that's what your TV needs.
-
I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
Running a tv as a second monitor
Hello all,
Just a quick question, I've just bought a dual 2.7Ghz G5 with the standard graphics card (everymac says its the Radeon 9650) and was just wondering if I could hook a HD TV to it to act as a second monitor.
Its a little decadent I know, but it would be nice. I haven't yet bought the TV, I'm in the process of upgrading everything and thats coming last.
Is there anything in particular I should look for - other than a dvi port etc. - or is this flat out impossible? Thanks in advance
DijeAnd you do need to run audio separately, if you want the sound to come out of the HDTV's speakers. Although HDMI carries the audio signal, DVI does not. The HDTV will probably have a pair of RCA (red/white) connectors for audio in. Just get a mini-stereo jack to RCA adapter, and run it parallel to the HDMI cable.
I've done it, and it works quite well (converting from DVI to HDMI). -
Trouble connecting second monitor (MBP late 2011)
Hi guys! I'm Nico and as you can see from the title i'm having problems connecting a second monitor to my macbook pro late 2011.
I have a mini display port to hdmi adapter that works perfectly fine (I use it with my HDTV), and because I also have an Asus external 22" monitor I bought a hdmi/vga cable
(http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=171010746825#ht_2700wt_1144)
so I could use my mini display port to hdmi adapter without buying another adapter.
This is what I do:
1- connect the vga cable to the Asus monitor
2- connect the other end of the cable (hdmi) to the mini display port to hdmi adapter
3- connect the mini display port to hdmi adapter to my macbook pro
But nothing works! My Mac is plugged to the power as well. I've tried to check in the monitor setting but nothing shows up, and even doing "detect display" still nothing works.
I've also tried to reset the pram. But without luck.
Any suggestions?
Thanks,
NicoAny idea guys?
-
Second monitor Picture-in-Picture?
Here's what I'm using:
White Macbook 4,1 (2008)
HDMI cable
Mini DVI to HDMI adapter
HDTV
I've been using the TV as a second monitor. I know how to mirror the displays too; that's not what I'm inquiring about.
I would like the second monitor (TV) to be a picture-in-picture on my laptop. It would be cool to have a small, windowed view of the second monitor's activity on my primary monitor. This way I can do my work and watch TV in the other room, while my roommates watch a movie on the big screen. (I have a crazy long HDMI cable)
Any help or suggestions would be greatly appreciated.
Thanks,
-DaveSorry I do not know of any third party utility that can do that and of course there's noting in OSX to do that on its own.
Physically there is no way to get video in to your machine except maybe using one of the Elgato products. -
Mirroring on second monitor. How?
Until we can use an external monitor, I am trying to mirror FCP X on the external monitor. I purchased a mini display to HDMI cable and it works. But...when I mirror the display, my resolution changes on my iMac. What is the proper procedure for doing this?
Best.
TomThe two monitors have to negotiate a common resolution, so the same screen can show on both. That "same screen", or "mirroring" requires they both be the same resolution. This is normal. HDMI is not really the best way to get a second monitor hooked up, unless you're using an HDTV monitor. In which case remember that TV's, even HDTV's are of lower resolution than computer monitors, by a good magnitude.
So, do NOT turn on mirroring, no! What you want is for the second monitor to just be a second, non-mirrored monitor. Then in FCP X, go to the Window menu, and there you can chose to show the Viewer (my personal preference) or the Browser on the second monitor.
For even more real estate, I also set to use Full Screen mode at the bottom of the Window menu (Cntrl+Cmd+F) -
Mini a1176 - 2.16ghz core 2 duo - second monitor
hey all,
recently picked up a used mini, core 2 duo @ 2.16ghz, model a1176 to replace my aging g5 and boy do i miss my second monitor.
i have seen usb video cards and was wondering if anyone had any suggestions as to what to get and, how it will impact the overall performance of the machine. i.e. if there are different options, which would run a second screen better with a better refresh rate.
any suggestion is appreciated! my budget would be sub $100 as i am also looking to upgrade the ram from 2gb to 3gb.
many thanksI haven't tried it, but another option, OWC USB 2.0 Display Adapter ...
Features
Works on PC and Intel Mac models
Lossless compression
LCD, CRT, projector displays
Connect one extra monitor per adapter to your desktop or laptop's USB port!
Configure connected monitors to either clone your primary screen, or extend the desktop allowing visibility of more applications at the same time!
Display Modes:
Can easily Mirror the main display
Extend left, right, above, or below
Can be rotated left, right, or upside-down
Windows Vista & 7 Aero support
Windows XP and Vista 32-bit support
Standard and Widescreen ratio aspects
High-Performance DDR memory
Completely silent operation
Uses very little computer resources and offers a vast array of screen resolutions and color depths ensuring little performance difference between a screen directly connected or via USB 2.0
Supports resolutions up to 2048 x 1152 including SDTV/HDTV resolutions: 480i/p (640x480), 720p (1280x720), 1080i/p (1920x1080)
Bus Powered Operation - no external power supply neededRequirements
* Available USB 2.0 port
Compatibility
* Macintosh
o Intel based Mac OS X 10.4.11 and above
o Supports up to four monitors
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/ -
Best way to add second monitor with HDMI input
I have a 24-inch Mid 2007 iMac. Processor 2.4 GHz Intel Core 2 Duo Memory 4 GB 667 MHz DDR2 SDRAM Graphics ATI Radeon HD 2600 Pro 256 MB. I need to add a second monitor, and while I'm at it, this new monitor will be an HDTV Monitor with an HDMI input. My iMac has the original USB connections. So I'm thinking an ethernet to HDMI adapter should do the trick.
Is this right? If so, what supplier makes a good ethernet to HDMI adapter?Hi
I've always thought powered DVI (ADC) was introduced on the Gigabit Ethernet G4s, like your dual 500. It should be easy to check, as the graphics card has an extra power 'stub' which fits into an extra slot on the logic board, between the main AGP slot and the back of the computer. If all the gold connectors on the Radeon 9000 are seated, I think you must have powered DVI/ADC. If some are 'floating' above the logic board, you haven't. -
Late 2008 model - Not Displaying Second Monitor
My logic board broke recently and I took it to Apple to get it fixed. Once it got out of repair, I picked it up and brought it home. Plugged in the DVI cable and it did not turn on. Turns out the display is there. I can move windows over to the second monitor, but it's not actually showing anything.
I have a Samsung HDTV and a DVI cable. It's worked before, so I know it's compatible.
The reboot did not work. "Detect Display" did not work. Adjusted brightness. Haven't tried using the cable on someone else's monitor, nor have I tried to use another DVI cable. I still have to look into these things.
I'm figuring that somewhere there is something I have to restart, but Google and the forums have failed me.Haven't tried using the cable on someone else's monitor, nor have I tried to use another DVI cable. I still have to look into these things.
You know what you need to do. Go ahead and do it. -
How to connect my Cinema Display as a second monitor
I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html -
Hello,
I have a brand-new HP z620 with an Nvidia Quadro K 4000 display adapter and apparently a software and/or hardware conflict.
I am experiencing an issue with Lightroom 5.4 window not working correctly with my second, not primary, monitor. When Lightroom is working on the second monitor and I need to edit an image in Photoshop cs6, I want Lightroom stay where it is and Photoshop to open on my primary monitor. And this has worked well for me on my previous system which was also a Windows 7 64-bit machine with an Nvidia GeForce GTX 570.
When I click the Lightroom option to "edit in Photoshop CS 6” The Lightroom window will move itself to the primary monitor for no apparent reason. This is the problem I am seeking to remedy.
No other external editing programs opened through LR behaves this way, such as NIK or OnOne Perfect Photo Suite, and I really need LR to stay on the second monitor on the extended desktop.
I’ve tried every monitor cabling setup I could think of to try and even unplugging the primary to make windows identify it as the 2 monitor in the screen resolution settings, but that does nothing for me. My new workstation is running the same OS version and a K4000. Monitors are currently connected to the display ports via dp to dvi adapters. I’ve already tried moving the connections around and plugging one into dvi, there doesn’t seem to be a setting I can change within windows or adobe to change this behavior.”
On a related note, I have similar instability in software made by X-rite that supports the use of a colorimeter allowing me to build profiles for monitors and evaluate colors precisely. During the profiling process I place the colorimeter in the designated place on the secondary monitor and direct the application to begin showing the colorimeter different colors on that monitor. At this point the colors jump to the primary monitor while the rest of the interface along with the colorimeter is a secondary monitor. I have a workaround that I'm using for this particular problem but I am fairly sure that the issue that causes the problem with Lightroom is also the source of my trouble here and I need to eliminate it.
thanks for your time,
Larry GarveyChange the sort order. View->Sort
-
How do I use my second monitor when first monitor in full screen??
HI. I just added a second monitor to my mac mini lion setup and when I go full screen with an app I can't use the other monitor. How do I fix this? Thanks.
Bump?
-
How can I use my Samsung 193p as a second monitor?
I am trying to use my Samsung 193P Monitor as my second monitor. It usually has great contrast and good color when attached to my PC. I plugged it into my imac using a DVI to mini DVI adaptor I bought at the apple store. Now it has awful color and the whites are a muddy grey. There do not seem to be any drivers to download. I've called Samsung and Apple and they have no ideas. It is at 1280x1024. Does anyone have any ideas for me? Is there a way to get the monitor communicating with my imac?? Thanks.
Thank you for the suggestions. I tried again. The thing about the Samsung 193P is that it doesn't have any external "buttons" to push for contrast and brightness. You are supposed to use MagicTune to do this, but of course, that is not compatible with mac. Without any adjustments, it usually looks great on a PC. Do you think I could use my Spyder to calibrate it with the mac? Could I only calibrate the 2nd monitor? I don't want to adjust the new mac monitor in any way. Would that be an option?
-
How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tvThe Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences
Maybe you are looking for
-
Stepper motor and loacell PID control - waveform motion.
Hi, Hardware : cRio9073, C series module 9403 for stepper motor control and 9215 for load cell data acquisition. I am trying to control a stepper motor in a closed feedback loop system with a load cell. The user would have to input two things : th
-
Java 6 update 19 will not uninstall
I am trying to revert to update 17 because of the various errors I receive with update 19, as indicated in other topics. In the control panel, update does not uninstall for some reason. Any suggestions so that I can reinstall update 17. I am on Win 7
-
Hi, I've got great help here in the past so I thought this would be the right place to try and find the solution to my problem loading data using SQLLDR into an oracle database. Basically, upon loading I am using a to_date function. However, the para
-
Display the particular column in the page Based on some condition.
Hi, I am using J developer 11g Release 2, I have one page contains form which give the details of a user,in that form i have column called Password,that password column needs to display only when i go for adding a new user,while editing the details o
-
Hi, i worked with Oracle Database 10g Express Edition, my problem is the execute the Backup utility, display the message error: RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FO