HDV sequence has green lines and pink dots after export

I digitized some HDV footage from a Sony HVR-VIU into Final cut Pro 7. Everything worked normally through the edit. After exporting the sequence as a quicktime movie, it played back fine as a quicktime. When I attempted to convert it to a media file in Sorenson Squeeze, the file showed up with green lines and pink dots over the picture. To test it differently, I dropped the file into IDVD. Same, result in playback. I've never seen anything like this before, any ideas?

Brad your article was extremely helpful in getting my sequence to work for a DVD. However, I've had success before using the same camera, format, etc., in making DVD's from an HDV sequence, and I'm curious as to what I did wrong this time. The most confusing part to me is that the original quicktime self-contained export played fine through quicktime, but got funky when placed into IDVD and Sorenson's Squeeze compressor. I must have done something wrong up front in digitizing or making settings in FCP, and I'd like to know what it was so I don't do it in the future. Thanks.

Similar Messages

  • My screen has green noise and pink stripes

    How do it fix my screen the colors are green noise and pink stripes

    You can try giving it a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that helps.
    But it's also possible that what's wrong is beyond a user fix and you should make an appointment at your local apple store and have them check it out.

  • Imported audio has green line and goes out of sync.

    What the heck is FCP doing to my audio!!!
    I render out a movie and treat it in After Effect (no speed changes) and bring the movie back into FCP in a new seq, I then take the audio exported from the same original seq the video was exported from in FCP and it is out of sync! It drifts, and has the green line on if meaning to me that FCP is changing it in some way, this is PAL 48k and was always PAL 48k.
    The only way I can get the audio to sync is to render out a whole movie again and just use the sound from it, then it is in sync with my original.
    Any one know what is up?
    Also, when I import from an aif captured in Pro Tools the waveform is not in sync with the sound I am hearing! This also has a green line on it when placed in the timeline as if the sample rate is not correct but it is 48K in a 48k seq.
    Mark

    Hi JohnDoe2009 - firstly, extracting the audio is not necessary in your case. Simply mute the video's audio, by reducing its level to zero - that is what actually happens when you extract the audio, after all.
    It is my experience also, that locking audio clips to particular video clips is not fail-safe if further cropping is done afterwards, especially if that cropping is fairly substantial. Where possible, do the syncing after all crop-editing has been completed.
    As a last check I always review the syncing before finalising the movie.

  • Today morning i turned my macbook on and i saw all the black area of screen has green lines and dots all over , can anybody tell me what causes it , and how to fix it, please anyone can help

    plz help with my graphic problem as i noticed tthis morning all the black area of the screen turned into green, anyone help me? will be apriciated,
    thanks in advance

    clintonfrombirmingham wrote:
    Which model do you have? If a mid-2010 15", there are known problems with the GPU and the logic board will be replaced free.
    Clinton
    The Mid 2010 15-inch MacBook Pro problems are related to kernel panics, so the GPU is still working. In the case of the OP, the GPU has stopped working completely, so his/her problem doesn't belong to the kernel panic problem, so the OP may have to pay. I may be wrong.
    Also, the 10.8.4 update won't help as this is a hardware problem, but it's always good to keep OS X updated

  • Startup screen has green lines and black box asking to restart

    When I try and start my computer, I get a series of vertical lines that go from pinkish red to green. Then a black
    Box appears telling me I need to restart in different languages. My computer is fairly old, does anyone know if this problem is fixable? Is it a part that can be replaced?

    clintonfrombirmingham wrote:
    Which model do you have? If a mid-2010 15", there are known problems with the GPU and the logic board will be replaced free.
    Clinton
    The Mid 2010 15-inch MacBook Pro problems are related to kernel panics, so the GPU is still working. In the case of the OP, the GPU has stopped working completely, so his/her problem doesn't belong to the kernel panic problem, so the OP may have to pay. I may be wrong.
    Also, the 10.8.4 update won't help as this is a hardware problem, but it's always good to keep OS X updated

  • Tax Reporter (PU19):W-2 download format has additional lines and character

    Hey experts,
    when running tax reporter (PU19) and creating the magnetic file for our W2s, our file has additional lines and characters in the file when downloading it on our desktop.
    The following occurs: At the top of the file:
    01/20/2012                                  Dynamic List Display                                                                                1
    |TEMSE OUTPUT                                                                                |
    Each line has an additional | at the beginning and end.
    At the bottom we have an additional doted line:
    How can we get rid of these lines and additional characters?
    Thanks

    Hi Arthi,
    Thanks for the reply ,  for TAX form Group W2M1, W2M2, W2M3  , while configuring Evaluation of tax form
    the following items required to select
    Evaluation of tax forms (Employee info required)
    Time ranges , in which data will be stored
    Reporting of retro calculation
    Please let me know how to configure these evaluation forms ?? and Does  any wagetypes needed to be assigned to these tax form groups ??
    Note:
    The customers has to use manual entries options in PU19 and use the below TFG to populate the respective fields accordingly.
    W2M1 MW508-Employer Total Tax Exempt Credits
    W2M2 MW508-Overpayment to be credited
    W2M3 MW508-Overpayment to be refunded

  • Green Line and black Space on Mac Mini TV

    I am getting a green line  and a black open space on the side of my Mac Mini TV when I set it up.  I have tried every different resouloution and it is still there.  The problem is that when I click Detect Displays, nothing happens to the screen. 
    Please help, I just got this today and I want it to function properly ASAP for a Project I am doing.

    What kind of connector is it using?
    DHCP seems to be a problem, do you have a DVI or VGA adapter & does the TV have that?

  • Dwell During Sequence of Blended Lines and Arcs

    Hi,
    I am trying to create a motion profile using blending  that  completes an ordered sequence of moves,mostly,it works great. But in some Speed Setting ,it don't work fine that come to a quite small speed as if there is a dwell.
    I am using  PCI 7334 and the open loop mode.
    Attachments:
    Sequence of Blended Lines and Arcs 1.vi ‏88 KB

    Hi Scott,
    positive values of the blend factor are interpreted as a delay[ms] between consecutive moves. You can change the blend factor for each blend operation.
    Running a complete motion sequence in an onboard program is not the intended use case of onboard programming and in fact in such a scenario there are no significant advantages compared to a host program in terms of execution speed and jitter. The reason for that is the fact, that onboard programs run on a quite slow controller in a low-priority thread, so this approach is not recommended.
    The most common use case of onboard programming is stopping a move at an event like exceeding a torque limit. Running such a task in an onboard program adds safety, as it runs independently from the (Windows) application.
    If your moves are too short and too fast for blending, you shoudl consider using contouring instead. Contouring provides the ultimate flexibility for defining motion profiles, including strictly timed delays.
    If you need more information, please add some more specific information to your next post (motion control board type, programming environment, motor type, drive,..)
    Kind regards,
    Jochen Klier
    National Instruments

  • The screen on my MacBook Pro Retina has horizontal lines and has a brightness flicker every few seconds since june 2013 upgrade of airport utility.

    The screen on my MacBook Pro Retina has horizontal lines and a flicker every few seconds this happened after  this weeks Airport Utility 6.3 upgrade.

    Hi John,
    I would take your machine into a Apple service center. Its highly likely a hardware issue. The most likely issue being the display has failed. If there is no external damage to the machines display they will replace the whole display under warranty for you.

  • TS2634 ipod has horizonal lines, and will not respond, anyone please?

    i pod touch has horizonal lines, and will not let you turn it off (will not respond) PLEASE HELP?!?!?

    Press and hold both the Home and Power buttons until it restarts.

  • My iphone 5 has green lines on the edges of my screen.What can i do???

    My iphone has green lines on th edges,apple replace the display of iphone 5 or i have to change my iphone.my iphone have 11 months

    Hi, Theo1997. 
    Here is a resource that may provide some troubleshooting steps to help with this issue.  See the section related to the iPhone display. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If all troubleshooting steps have been processed, I would recommend taking a look at the section labeled Issue not resolved.
    Cheers,
    Jason H.

  • Slide to unlock has parallel lines and will not function

    slide to unlock has parallel lines and will not function

    Hello there, Jennings48.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with touchscreen response and links to additional information as well:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why has my Safari and MAIL slowed after upgrading to Mountain Lion on my MacBookPro ?

    Why has my Safari and MAIL slowed after upgrading to Mountain Lion ? I have mid-2009 MBPro and have very fast Internet access router.

    I have noticed the same thing on my MAC.  Mail has become very "clunky"- Before Mountain Lion, whenever I clicked on a msg or a function (delete), it would respond immediately.  With Mountain Lion there is an unacceptable hesitation.  What is going on with this latest update?

  • AVI Clips Imported to CS.5.5 Has Green Tint and Colored Lines

    NOTE:
    I'm using the video monitor in the CS5.5 program.
    Still trying to upgrage to CS5.5 and testing out the trial version. The new challange is the green tint and colored lines on the imported .AVI files.
    Any tips would sure be appreciated. Thanks.

    This is crazy.
    These are AVI files in CS5.5 that have been used for over 10 years in other versions of Premiere.
    If I double click on the Monitor when the video is paused, the color corrects to original. Play again and crazy green color and lines.
    Now, if I play the clip without double clicking on the monitor window, the clip will play out green and pause green, but if I double click in the monitor window, the video will correct in pause, but still play out green.
    Here's one AVI file:
    Type: AVI Movie
    File Size: 423.1 MB
    Image Size: 720 x 480
    Frame Rate: 29.97
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00;01;57;00
    Average Data Rate: 3.6 MB / second
    Pixel Aspect Ratio: 0.9091

  • Green line and flutter at bottom of screen amidst slowmo dissolves.

    I'm editing a wedding shot on miniDV at 30i. As with most weddings I use a lot of 50% speed with frame blending and a lot of dissolves. I've noticed that during some dissolves I get two pixels of what I can only term as flutter on the very bottom of my screen. This is especially noticable generally when I'm going from a bright shot to a dark shot or vice versa. It doesn't happen all the time but it happens very frequently. I also occasionally get a green line that renders for a single frame at the bottom of the screen.
    I should note a few things: first, this doesn't appear until I actually render the dissolve. In realtime effects they all look fine. second, the problem is totally consistent even if I rerender. I will always get the same flutter or the same green line at the same time code in the sequence with the same clip every time.
    I've only begun my investigations into this problem, but I believe it's a field problem of some kind in that some bug in how FCP renders is not handling the fields properly. I plan to submit a detailed bug report once I narrow the problem down further.
    I tried changing my sequence from bottom field first to no field dominance and the problem disappears. My final format is DVD so my question to the gurus out there as a fix for the time being is: if I render my entire sequence with no field dominance and then export it and compress (using something other than Compressor 2 which has known blockiness issues) and in the compression program specify bottom field first will the fields split back out fine without causing some other issue just as if I'd always had it bottom field first? In theory I would think that should be the case.
    Also, is anyone else experiencing or come across this problem?
    Dual 2.7Ghz G5 1.5GB RAM   Mac OS X (10.4.3)  

    If that is the concern, either crop the offending clip by a couple of scanlines, or use Andy's letterbox generator (in downloads on http://www.proapptips.com - you may have to register, but the plugin is free), and throw it over the offending section...
    Patrick

Maybe you are looking for

  • Taking very long time to pick the file from internal deliviery channel fold

    Hi B2B gurus, For one of our trading partner we are testing an AS2 connectivity, so we are sending a 850 po's through internal deliviery channel(create a folder in-house), but while placing the 850 in a internal folder, its taking very long time to p

  • Using Motu DP and Logic Together - More use of all cores on the PPC Quad

    Since there's been some talk about how DP uses four cores on the PPC quad lately I thought I might add what I've been doing to take advantage of untapped processing power. If you have DP (I am running 4.5) you can run it alongside Logic Pro and use i

  • How to change sender's name in  FM SO_NEW_DOCUMENT_ATT_SEND_API1

    Hi Friends , I am using FM "SO_NEW_DOCUMENT_ATT_SEND_API1" I want to change sender's name in this Fm. Actully when i am using this FM , in place of sender my name is goign but i want to send system name. Please help in this. point will be assign,

  • Creative Cloud Re-newal Error.

    Hi We bought Creative Cloud in Sept 2013 and now software is asking for a re-newal error.  Can someone help me locate the license details for the software bought.  Deidre 07 34827433

  • One Application server accessing to seperate SID's

    I have 1 Application Server setup. I need to access two seperate SID's(sid=AA,sid=BB) located on the same Database Server. If I am running reports from the Application Server for both SID's, how do I determine which reports belong to which SID? Messa