Head office and POS integration real time scenerio

Hello experts,
I am looking for some realtime scenerio of head office integration with pos (3rd party). Kindly give me some guidelines on the same.
With Regards
Abhishek Sinha
Idhasoft, India

Hello,
SAP has got standard solution called POSDM for POS Integration with backend ERP system. Please see the attached link for details [http://sapknowhow.ning.com/profiles/blog/show?id=2328205%3ABlogPost%3A381].
Thanks,
Venu

Similar Messages

Head office and branch office accounts

HI sap gurus,
can any explain the configuration steps for head office and branch office accounts in vendor and customer master accounts and how to post an invoice in this configuration
Regards,
Umesh

I am assuming u are using SD integration for the billing . Therefore, please go to VD02 for the Child Customer profile under the correct sales org,distbn channel, div.
Then under the Partner functions tab set the SP Sold to party as the Child, BP Bill to Party as Parent,PY Payer as Parent and SH Ship to party as Child.
If its only for FI documents config then proceed in FD02 only, else if its integrated then use XD02.
Then under the Company code data in the Account management Tab set the Head office as the Parent . Then all the future postings will have Acct = Parent but Branch = Child.
If you want some examples which we have discussed before then go to
Re: Customer Master -- Parent + Child Relationship
Link between Branch Accounts and Head Office Account
To link branch accounts to a head office account, you must enter the number of the head office account in the Head office field in the branch account master record. This field is contained in the company code area of the master record.
The head office account can be any vendor account except one-time accounts or branch accounts themselves. Branch accounts and head office accounts must belong to the same company code.
Line Item Display
When you are entering the parameters for line item display, you should note the following: for head office accounts, enter the key 004 in the field Sort key. This instructs the system to display the line items for the head office account sorted by branch. This key is defined in the table for allocation rules.
For more information on line item display and the Sort key field, see Sorting Line Items
Correspondence
You can set up your system to cater for written correspondence with vendors a) for the head office, broken down per branch or b) for each branch individually. If you want to create correspondence (such as dunning notices and account statements) for the individual branches instead of the head office, you have to select the Local processing field in the vendor master record of the head office on the Create Customer: Correspondence screen.
You can also define payment methods in the master records of the branches and head offices. For example, if you want to have certain payment methods for particular branches, enter these in the master records of the branches concerned and do not enter any payment method in the head office master record. If you enter payment methods in both head office and branch master records, all payment methods are possible.

Proper way to install windows update on Exchange 2010 DAG with one mailbox server in Head Office and 1 mailbox server in DR site both are members of 1 DAG

Hi Guyz,
I have this setup in my exchange environment.
1 DAG with 2 members
- One member is located in Head Office and the other member is located in DR site. All of the mailbox databases are located only in HO (Plan to add additional second member in HO soon). Now what is the proper way to install windows patches on the
member in HO? I don't want to move the databases to DR site as much as possible.
Appreciate your feedback and Many thanks in advance guyz..
More power to all!
Regards,

Hi,
To update the DAG members with new patches, the update process should be managed to prevent all of the DAG members from being offline at the same time.
To do this, I recommend you move the active mailbox databases off a particular server so that it can be patched, and if necessary rebooted, without causing any downtime for mailbox users on that database.
For detailed steps, here is an article for your reference.
How to Install Updates on Exchange Server 2010 Database Availability Groups
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-database-availability-groups/
Note: Microsoft is providing this information as a convenience to you. The site is not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Is it possible to set up my iPad as a video camera and broadcast it real time to a TV via apple TV?

Is it possible to sey up my iPad as a video camera and broadcast it real time to a TV via Apple TV?

Use airplay to send what is on the iPad to your tv.
Since ipad2, you can display exactly what is on the ipad screento a tv via an adaper or via airplay through an apple TV.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
General overview but lacks specifics.
http://accelerateyourmarketing.com/home-video-studio/
Video
https://www.youtube.com/watch?v=ce5FVJi0Uxw

TWO VERY TOUGH SUPPORT PROBLEMS FACED AND SOLVED IN REAL TIME

pls any body post two very tough support problems faced and solved in real time.
my id is: [email protected]

Hi Priya.,
For example client wants his customer legacy number in XD01 master data which is not there in Standard SAP.we can satisfy the requirement with USER EXIT
2) If the client wants customer Phone number in the sales order we can use user exit to satify the requirement
These are not provided in Standard SAP & we should work out on alternative way
REWARD if helpfull
Thanks & Regards
Narayana

Head Office and Branch

Hi all,
In AP - Using Head office and Branch Office scenario, payment is made to Head office and this payment clears the line item in Branch accounts (Branch vendor code / account number) also.
The question is my client wants the payment to be made to Individual Branch accounts and not to Vendor Head office .
In other words, when we go to transaction code F-53, branch accounts (vendor branch code / accounts) are not showing the open items to pay for. My client wants the transaction code F-53 to show the open items and wants to make payment to Branch and the clearing document should reflect in Branch Vendors code / account.
Please can anyone help
Thank you and KindestRgeards
Srikaanth

HI Murali Babu,
Thanks for continuous support
The following are the steps I have done.
Please have a look, Let's say
Vendor 1000219 is HO
Vendor 1000220 is Branch
went to transaction code XK02 - Vendor account 1000220 - Head office Field is filled with Vendor 1000219
Data Saved.
went to transaction code XK02 - Vendor account 1000219 - Local Process (under correspondence in company code tab) activated.
Created a Invoice against vendor 1000220 (through transaction code F-02).
went to transaction code F-53, picked vendor account 1000220 - to pay the Branch office
System says - no open items found.
I am with Ecc6 - EhP 5 (do not know whether I am missing anything else)
do I need to raise OSS message
or look for SAP notes
thanks to everyone for a very nice support
If I have missed out any configurations or any settings with Master records, please do let me know
Thank you and KIndest regards
Srikaanth
Edited by: E.S.Srikaanth Srikaanth on Jan 30, 2012 6:47 PM
Edited by: E.S.Srikaanth Srikaanth on Jan 30, 2012 6:49 PM

How to split head office and branch office?

how to split head office and branch office?
please explain it?

Hi What do you mean split - do you want to split the invoice value, say 1/2 for branch and 1/2 for head office?

Oracle Data Integrator - Real Time Integration

Hi,
I want to know that, is there any possibility of integrating data in real-time using Oracle Data Integrator?
If yes, does it affect the OLTP system performance? (Could it read from db logs,etc..)
Thanks..

Using ODI with Logminer-based CDC will affect performance on the source system more than using Oracle Goldengate, let me explain why:
When using the ODI Logminer-based Journalisation the Logminer functionality will move the primary-key of the affected row into the journal table. When you are then ready to move the changed data, running an interface to move the data reads the Journal-view, which joins the journal table (primary keys) to the source data (and dealing with deleted rows), optimising out duplicate rows in order to bring across the then-current state of the data, which can then be loaded into the target system, on completion, the moved rows can be removed from the journal table. The data will appear in the journal table as soon as Logminer puts it there, which may be a lag of up to two minutes using asynchronous setting, whereas Synchronous Logminer applies "system triggers to the table, with the consequent overhead.
With Oracle Goldengate, the comitted transactions are read from the log as soon as the log-writer puts the commit into the log. All the data is picked up from the log, at that point. It is then written to the trail-file system of Oracle Goldengate which can be propogated to multiple other systems potentially with sub-second latency, and minimal impact on the source system due to the efficient reading and writing mechanisms. One other consequence of using Oracle Goldengate is that you get every change of the data, not the optimised then-current state of the data when moved.
Hope this explanation helps.

Can I acquire and analyse in real time with regular Labview?

I have to acquire samples (which vary cyclically in a roughly sinusoidal fashion) from a sensor, and check every sample to see if it is the minimum (the valley) of a cycle. If it is, and it does not fall within an expected range, I have to take a corrective action that involves rejecting the part that was just measured as well as a 30 more parts (to make sure that the defective part has been rejected). The signal from the sensor is not very noisy, but beause of the nature of the measured object, there could be local minima and maxima. To guard against that, a point is considered to be a valley only if subsequent readings deviate above that point by a certain amount. If a part is indeed defective,
a digital out put has to issued to reject that part.
Can all these be done using regular Labview (not RT)? I tried it out with a proto-type VI, using DAQmx vis, continously acquiring samples, but reading one sample at a time from within a loop (the VI I used is attached with this question). The result has been disappointing, since each time the loop executes there is a delay that keeps building up. Finally, even after the part feed has been turned off I can see Labview processing signals from parts that have long since gone past the measuring head.
Another perplexing thing I found is that the time taken to execute the while loop in the vi is not consistent; it takes anything from 6 to 50ms to execute.
I will need atleast 8-12 samples from a part to build its profile, and the feed rate is about 3000 parts per minute. I am using Labview 7.0 with an NI-6013 card in a Windows 2000 environment.
Thanks for any suggestions / recommendations.
Attachments:
find_trough_2.vi ‏378 KB

Hello,
Thank you for your suggestions; I had already resigned myself to going for a Real Time system, your answer convinced me to commit myself to it!
That said, your reply leads to a couple of (related) questions...
1. Your point regarding the use of Local Variables is well taken; I have been repeatedly told at various training sessions how the necessity of updating the LVs during each loop iteration slows the computation time. However, what alternative do we have when there are several controls to which we have to write AND read data multiple times during a loop iteration, and perform different computations based on the value held by these controls? (You have seen the VI I attached with the original question). Some of these conditional
computations further change the value of the controls. Does Labview have any other mechanism to store and manipulate the intermediate value from a computation?
2. I did a simple experiment to determine the average loop time, and the results were surprising. I placed the entire content of the VI I used (Find the Valley in cycle.vi) in a stacked sequence structure, and wired the index counter "i" to a control to count the number of iterations the loop executes. I placed a frame before this with a tick count instruction to get the start time of the loop, and a frame after this to get the end time of the loop. Dividng the difference of these with the number of iterations, I got the average loop time to be around 1.2ms! Am I interpreting my results incorrectly?
Thnaks once again for your response. I would really appreciate your views on the questions I have raised in this comment
Regards
Arun P. Madangarli

How to calculate rms voltage, rms current and frequency from real time data?

Hello,
I need to calculate the real time rms voltage, rms current and frequency of the received voltage and current graphs using visa read. Actually am trying to monitor the voltage and current parameters of AC load, in this case, am using a set of 4 light bulbs at the moment. Expected frequency is 50 Hz, and rms voltage close to 240v AC, current about 1A.
Attached is the vi picture of what I have been able to achieve so far, courtesy of labview forums. But I need to finally finish this vi by calculating the Vrms, Irms and frequecy. The front panel shows the voltage (Chart V) and current (Chart I) after scaling. Chart VI represents ADC value 0 ~ 1023 of received data. Aray V & I show the binary bits received up to 10 bits of useful data from ADC. Each sine wave from ADC is sampled at 25 samples for the ADC conversion, and sampling frequency of 1.28kH.
I have tried using the RMS vi, but seems I don't know how to configure it correctly to get desired results. Also when I make changes like switching of one of the bulbs so that their is current change, I need to refresh the SERIAL port first before changes show up on the VI. Any ideas on how to improve on this are highly appreciated.
Otherwise, I would appreciate if somebody helps me MODIFY my VI to read the rms values and frequency from received data. This is the last piece of my project, I do appreciate all the help rendered. Am currently using labview labview 2014, student version!
Gavin.
Attachments:
Test_revised1.vi ‏39 KB
Test_frontpanel.png ‏196 KB
Test_blockdiagram.png ‏187 KB

hello,
note that peak voltage (Vpeak) is (240 * 1.414) = 399 V and peak current about 1.414 if intended rms current is 1A.
Gavin.

Jerky and "Not In Real Time"

Why is my footage in AF 5.5 jerky and why do I get a message in red saying"Not in Real Time"?
Any ideas please?

You're not giving us any information to work with to help you. We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
I'm going to take a guess, and I'm guessing that you are previewing by pressing the space bar. Don't do that. Use RAM preview to get real-time playback of previews.
Start here to learn After Effects: http://adobe.ly/bjBT3P

Continuous data acquisition and analysis in real time

Hi all,
This is a VI for the continous acquisition of an ECG signal. As far as I understand the DAQmx Analog read VI needs to be placed inside a while loop so it can acquire the data continously, I need to perform filtering and analysis of the waveform in real time. The way I set up the block diagram means that the data stays int the while loop, and as far as I know the data will be transfered out through the data tunnels once the loop finishes executing, clearly this is not real time data processing.
The only way I can think of fixing this problem is by placing another while loop that covers the filtering the stage VIs and using some sort of shift registeing to pass the data to the second loop. My questions is whether or not this would introduce some sort of delay, and wether or not this would be considered to be real time processing. Would it be better to place all the VIs (aquicition and filtering) inside one while loop? or is this bad programming practice. Other functions that I need to perform is to save the data i na file but only when the user wants to do so.
Any advice would be appriciated.
Solved!
Go to Solution.

You have two options:
A. As you mentioned, you can place code inside your current while loop to do the processing. If you are clever, you won't need to place another while loop inside your existing one (nested loops). But that totally depends on the type of processing you are doing.
B. Create a second parallel loop to do the processing. This would decouple the processes to ensure that the processing does not hinder your acquisition. See here for more info.
Your choice really depends on the processing that you plan to perform. If it is processor-intensive, it might introduce delays as you mentioned.
I would reccomend you first try to place everything in the first loop, and see if your DAQ buffer overflows (you can monitor the buffer backlog while its running). If so, then you should decouple the processes into separate loops.
Regarding whether or not "this would be considered to be real time processing" is a loaded question. Most people on these forums will say that your system will NEVER be real-time because you are using a desktop PC to perform the processing (note: I am assuming this is code running on a laptop or desktop?). It is not a deterministic system and your data is already "old" by the time it exits your DAQ buffer. But the answer to your question really depends on how you define "real-time processing". Many lay-people will define it as the processing of "live data" ... but what is "live data"?

I know its Friday but please reply with some real time scenerios...

Please let me know the kind of challenges you faced on your current project and the kind of approach you took to solve them...
Regards by heart
Bhalout

Hi Bhalout
We can say every project is a challenging one .... But one of the case i can explain is .........
We are getting monthly data from source , but we need maintain that data in ODS according to Weeks.
Example:
CompanyCode| Month | Key Figure
1000 | 200703| 100
I have split the monthly records in to Weekly record when loading the data in to BW. This is done by selecting Return Table option in the update rules of a Key figure and a writing a start routine..........
Example:
ODS/Cube Data
CompanyCode | CalMonth | Week | KeyFigure
1000 | 200703 | 200709 |25
1000 | 200703 | 200710 |25
1000 | 200703 | 200711 |25
1000 | 200703 | 200712 |25
Hope this example works..........
Some other challanges you can explain about are
Query Performance issues when go live and you can explain about maintaining aggregates, data load issues such as failing of delta in a process chain .........and how you resolved those issues.
One example is you can say Users want to see some special characters in the report and I used RSKC transaction to allow those special characters.........
Mostly this question is a general question and I hope you can get more real time scenarios from sdn.......
Assign Points If useful.......
Regards
Naga

Directing fsck output to syslog and screen in real-time

Hello,
I have the following under Debian 6. The procedure should check and automatically repair the file system and write the result to the user's screen and also to syslog.
#!/bin/bash
output=`fsck -y /dev/disk/by-label/oracle-xe; retval=$?`
logger -is "$output"The procedure seems to work, but I don't see the output until the fsck command has completed. Is there a possibility to write the output to syslog while presenting the fsck output in real-time?
Kind regards.
Edited by: Dude on Jan 30, 2012 6:44 PM

I make some progress:
outfile=/tmp/`date +%N`
retfile=/tmp/`date +%N`
(fsck -y /dev/disk/by-label/oracle-xee; echo $? > $retfile) | tee $outfile
logger -i < $outfile
retval=`cat $retfile`
rm $outfile
rm $retfileThe above gives me the results I was looking for
I also tried
logger -is "`fsck -y /dev/disk/by-label/oracle-xee`"But it the syslog output in this case is just one long line of text without any newlines
If there is a better way, please let me know.
Edited by: Dude on Jan 30, 2012 6:57 PM

Real time scenerios

hi gurus,
Please send some real time issues u faced at the time of implementation and support . if possible send any link.
thanks and regards
raju

Hi
Most of the threads whcih are posted in SDN forumns are real time issues only, you need to go through them , so that you understand the issues clearly.
Thanks & Regards
Kishore

Head office and POS integration real time scenerio

Similar Messages

Maybe you are looking for