Header/Footer doesn't show after upgrade to G6

I put up a G6 sandbox and upgraded the database from 5.0.3 to 6. It seems the subportal upgraded to the "experience definition" fine, but all header/footer associated with the subportals (now the definition) don't show up. Has anybody else see this problem before? Is there anything I need to do to configure the definition after upgrade?
Thanks!

I had that problem. Try the following:
1. Assign to the folder that contains all your users the correct definition experience.
2. In your Experience Rules Manager, add the users and groups
3. Stop and start publisher. And republish your heather and footer.
Let me know if it worked out

Similar Messages

  • External hard drive doesn't show after upgrade to Yosemite

    I upgraded to Yosemite and now my WD 1TB external HD doesn't show up on my MacBook Pro 2.9 GHz.  It shows in the system information under 'About This Mac', but I can't access it.  So I can't use Time Machine to do any back-ups, and I can't back up the files on the external drive before reformatting it.  Anyone know how to fix this?  From other web communities, this seems to be an Apple problem and NOT a hardware issue.

    If it shows in Disk Utility, use the Restore tab to copy the files to another location. Note the warning about reformatting the destination.

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • Downloaded Safari 5, doesn't show after multiple installs / reboots

    I went to apple.com and downloaded the latest is Safari 5 at http://www.apple.com/safari/download/ and downloaded the package, ran installation and then rebooted the Mac.
    I tried this several times. When I tried to check for any Safari, it doesn't show after installation.
    The only contents on the Mac named 'safari' is the .dmg I used. And I tried to install more than once.
    I did click on the dmg and did actually use the installer package.
    I did also restart the Mac 10.6.8.
    I did open my System Profiler (Applications/Utilities), and clicked the gray disclosure triangles so that they face down. No Safari.
    I found another thread discussing this, but could not make any of the suggestions work, and several I couldn't even find.
    Thanks,
    Tony
    Hardware Overview:
      Model Name:    iMac
      Model Identifier:    iMac10,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    3.06 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    3 MB
      Memory:    4 GB
      Bus Speed:    1.07 GHz
      Boot ROM Version:    IM101.00CC.B00
      SMC Version (system):    1.52f9
      Serial Number (system):    QP******5PC
      Hardware UUID:    6D4B1C2A-800A-5E20-B0A7-3791AE3F5CA2
    <Serial Number Edited by Host>

    Not in Applications.
    Did this download / install multiple times. It's a problem that has happened to others who have posted here.
    Tony

  • ITunes doesn't work after upgrade to iOS 6

    iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

    What printer are you using?  Is it listed here:
    http://support.apple.com/kb/ht4356

  • TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    Hi AnaMusic,
    It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
    I'm currently working in Korea, but I bought the IPad in Australia,
    Regards,
    Namur

  • [solved]wacom doesn't work after upgrade to xorg 1.6 and kernel 2.6.29

    hello..
    i have already posted about that in testing-forums, but since xorg 1.6 and kernel 2.6.29 have moved to extra, though i'd create a seperate topic about that.
    after i have upgraded to xorg 1.6 and kernel 2.6.29 my wacom device (as built-in, not usb) on my thinkpad x41t stopped working.
    before upgrade i have used xorg with hotplugging enabled. everything worked fine.
    after wacom stopeed working i removed everything regarding input devices from xorg.conf -> no change
    put an fdi-file for wacom -> no change
    installed linuxwacom-dev -> no change
    i don't really know, if it's a kernel or an xorg issue. loading wacom drivers manually still doesn't solve the problem. no warnings or errors about wacom in xorg-log or messages.log
    how could i check, wether my system recognizes the device properly at all? it doesn't show up in lspci or in lsusb.
    any help would be great.
    Last edited by lynucs (2009-04-14 18:57:17)

    well, upgraded again to xorg-server 1.6, disabled hotplugging, installed linuxwacom-dev from aur and the wacom works as allways. (had to edit xmodmap one more time, since kbd returns other keycodes than evdev does :-| ). no matter, done is done.
    but intel driver returns broken graphics if i rotate screen with xrandr.
    i guess there is no way around this execpt switching to the ultra-slow legacy driver?
    just for comparison - glxgears fps:
    intel: ~900fps
    intel-legacy: ~280fps
    Last edited by lynucs (2009-04-14 18:56:48)

  • Mount volume script doesn't work after upgrading to Yoesmite

    I just upgrade my Mac OS to Yosemite and the boot up mount script doesn't work again.
    try
    mount volume "afp://admin:[email protected]/Multimedia/Music"
    mount volume "afp://admin:[email protected]/workspace"
    end try
    Should I modify the mount script and how to do that?
    Thank you so much.
    Matthew Ho

    I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
    i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
    any one seen this before.. ?
    all my other Mac's work fine..
    please help..

  • After upgrade iphone 4 ios 6.01 doesn't work, after upgrade iphone 4 ios 6.01 doesn't work

    after upgrade iphone 4 ios 6.01 doesn't work
    does anybody have an idea what can i do plsss help mee

    i just upgraded it to 6.0.1 and the process from itunes is done sucessfully and when it should normaly switched it is blocked it shows only the pic of apple...

  • Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list box in
    forms, although user has chosen something from the drop down list box, the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files. After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
    can not open this Internet site. The request site is either unavailable or can
    not be found. Please try again later", although the server and the files are all
    in local host server.
    Please help. Thanks

    Did you update your workshop application files and recompile your application?
    A few things changed between GA and sp2, some annotations were renamed, and some
    were added.
    If you open up your application in Workshop sp2, it should given you the option
    to upgrade your application.
    Failing that, you may need to go through the code that is not performing as it
    was before and check whether it was not utilising a bug that was fixed in sp2
    and thus causes it to not function correctly now.
    "Cynthia" <[email protected]> wrote:
    >
    Hi,
    Our application worked on workshop 8 sp1. After we upgrade system from
    sp1 to
    sp2, some of the part doesn't work propertly any more.
    1. netui:select seems not bind form data propertly. For drop down list
    box in
    forms, although user has chosen something from the drop down list box,
    the returned
    value in the form is always null.
    2. we use Java script window.open(url,...) to download and view files.
    After upgrade
    from sp1 to sp2, clients keep getting IE error complaining that "Internet
    Explore
    can not open this Internet site. The request site is either unavailable
    or can
    not be found. Please try again later", although the server and the files
    are all
    in local host server.
    Please help. Thanks

  • [SOLVED] Xorg doesn't start after upgrade to 1.17.1

    Archlinux i686
    Intel Core 2 Duo 6600
    01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
    After following upgrades:
    [2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
    [2015-02-26 03:27] [ALPM] transaction started
    [2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
    [2015-02-26 03:28] [ALPM] transaction completed
    [2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
    [2015-02-26 03:29] [ALPM] transaction started
    [2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
    [2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
    [2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
    Xorg doesn't start after reboot and I found following kernel message:
    kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
    and /var/log/Xorg.0.log looks like this:
    [ 5.591]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 5.591] X Protocol Version 11, Revision 0
    [ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
    [ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
    [ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
    [ 5.591] Build Date: 22 February 2015 12:52:47PM
    [ 5.591]
    [ 5.592] Current version of pixman: 0.32.6
    [ 5.592] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
    [ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 5.598] (==) ServerLayout "ServerLayout0"
    [ 5.598] (==) No screen section available. Using defaults.
    [ 5.598] (**) |-->Screen "Default Screen Section" (0)
    [ 5.598] (**) | |-->Monitor "<default monitor>"
    [ 5.599] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.599] (**) | |-->Device "Device0"
    [ 5.599] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.599] (**) Option "BlankTime" "0"
    [ 5.599] (**) Option "StandbyTime" "0"
    [ 5.599] (**) Option "SuspendTime" "0"
    [ 5.599] (**) Option "OffTime" "0"
    [ 5.599] (==) Automatically adding devices
    [ 5.599] (==) Automatically enabling devices
    [ 5.599] (==) Automatically adding GPU devices
    [ 5.608] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 5.608] (**) Extension "Composite" is disabled
    [ 5.608] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 5.608] (II) Loader magic: 0x829e700
    [ 5.608] (II) Module ABI versions:
    [ 5.608] X.Org ANSI C Emulation: 0.4
    [ 5.608] X.Org Video Driver: 19.0
    [ 5.608] X.Org XInput driver : 21.0
    [ 5.608] X.Org Server Extension : 9.0
    [ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
    [ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5.613] (II) LoadModule: "glx"
    [ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5.632] (II) Module glx: vendor="X.Org Foundation"
    [ 5.632] compiled for 1.17.1, module version = 1.0.0
    [ 5.632] ABI class: X.Org Server Extension, version 9.0
    [ 5.632] (==) AIGLX enabled
    [ 5.632] (==) Matched nouveau as autoconfigured driver 0
    [ 5.632] (==) Matched nv as autoconfigured driver 1
    [ 5.632] (==) Matched nouveau as autoconfigured driver 2
    [ 5.632] (==) Matched nv as autoconfigured driver 3
    [ 5.632] (==) Matched modesetting as autoconfigured driver 4
    [ 5.632] (==) Matched fbdev as autoconfigured driver 5
    [ 5.632] (==) Matched vesa as autoconfigured driver 6
    [ 5.632] (==) Assigned the driver to the xf86ConfigLayout
    [ 5.632] (II) LoadModule: "nouveau"
    [ 5.632] (WW) Warning, couldn't open module nouveau
    [ 5.632] (II) UnloadModule: "nouveau"
    [ 5.632] (II) Unloading nouveau
    [ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "nv"
    [ 5.633] (WW) Warning, couldn't open module nv
    [ 5.633] (II) UnloadModule: "nv"
    [ 5.633] (II) Unloading nv
    [ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "modesetting"
    [ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
    [ 5.634] compiled for 1.17.1, module version = 1.17.1
    [ 5.634] Module class: X.Org Video Driver
    [ 5.634] ABI class: X.Org Video Driver, version 19.0
    [ 5.634] (II) LoadModule: "fbdev"
    [ 5.634] (WW) Warning, couldn't open module fbdev
    [ 5.634] (II) UnloadModule: "fbdev"
    [ 5.634] (II) Unloading fbdev
    [ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 5.634] (II) LoadModule: "vesa"
    [ 5.634] (WW) Warning, couldn't open module vesa
    [ 5.634] (II) UnloadModule: "vesa"
    [ 5.634] (II) Unloading vesa
    [ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 5.634] (++) using VT number 7
    [ 5.635] (II) modeset(0): using drv /dev/dri/card0
    [ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [ 5.636] (==) modeset(0): RGB weight 888
    [ 5.636] (==) modeset(0): Default visual is TrueColor
    [ 5.636] (II) Loading sub module "glamoregl"
    [ 5.636] (II) LoadModule: "glamoregl"
    [ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 5.647] compiled for 1.17.1, module version = 1.0.0
    [ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
    [ 5.772] (II) glamor: EGL version 1.4 (DRI2):
    [ 5.786] (II) modeset(0): glamor initialized
    [ 5.786] (II) Loading sub module "dri2"
    [ 5.786] (II) LoadModule: "dri2"
    [ 5.786] (II) Module "dri2" already built-in
    [ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
    [ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
    [ 5.950] (II) modeset(0): Output TV-0 has no monitor section
    [ 6.006] (II) modeset(0): EDID for output DVI-0
    [ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
    [ 6.006] (II) modeset(0): Year: 2011 Week: 8
    [ 6.006] (II) modeset(0): EDID Version: 1.3
    [ 6.006] (II) modeset(0): Digital Display Input
    [ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 6.006] (II) modeset(0): Gamma: 2.20
    [ 6.006] (II) modeset(0): DPMS capabilities: Off
    [ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 6.006] (II) modeset(0): First detailed timing is preferred mode
    [ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 6.006] (II) modeset(0): Supported established timings:
    [ 6.006] (II) modeset(0): 720x400@70Hz
    [ 6.006] (II) modeset(0): 640x480@60Hz
    [ 6.006] (II) modeset(0): 640x480@67Hz
    [ 6.006] (II) modeset(0): 640x480@72Hz
    [ 6.006] (II) modeset(0): 640x480@75Hz
    [ 6.006] (II) modeset(0): 800x600@56Hz
    [ 6.006] (II) modeset(0): 800x600@60Hz
    [ 6.006] (II) modeset(0): 800x600@72Hz
    [ 6.006] (II) modeset(0): 800x600@75Hz
    [ 6.006] (II) modeset(0): 832x624@75Hz
    [ 6.006] (II) modeset(0): 1024x768@60Hz
    [ 6.006] (II) modeset(0): 1024x768@70Hz
    [ 6.006] (II) modeset(0): 1024x768@75Hz
    [ 6.006] (II) modeset(0): 1280x1024@75Hz
    [ 6.006] (II) modeset(0): 1152x864@75Hz
    [ 6.006] (II) modeset(0): Manufacturer's mask: 0
    [ 6.006] (II) modeset(0): Supported standard timings:
    [ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 6.007] (II) modeset(0): Monitor name: SMBX2331
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
    [ 6.007] (II) modeset(0): EDID (in hex):
    [ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
    [ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
    [ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
    [ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
    [ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
    [ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
    [ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
    [ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
    [ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
    [ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
    [ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
    [ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
    [ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
    [ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
    [ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
    [ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 6.063] (II) modeset(0): EDID for output DVI-1
    [ 6.116] (II) modeset(0): EDID for output TV-0
    [ 6.116] (II) modeset(0): Output DVI-0 connected
    [ 6.116] (II) modeset(0): Output DVI-1 disconnected
    [ 6.116] (II) modeset(0): Output TV-0 disconnected
    [ 6.116] (II) modeset(0): Using exact sizes for initial modes
    [ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.116] (==) modeset(0): DPI set to (96, 96)
    [ 6.116] (II) Loading sub module "fb"
    [ 6.116] (II) LoadModule: "fb"
    [ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.118] (II) Module fb: vendor="X.Org Foundation"
    [ 6.118] compiled for 1.17.1, module version = 1.0.0
    [ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.118] (==) Depth 24 pixmap format is 32 bpp
    [ 6.462] (==) modeset(0): Backing store disabled
    [ 6.462] (==) modeset(0): Silken mouse enabled
    [ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.535] (==) modeset(0): DPMS enabled
    [ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
    [ 6.535] (II) modeset(0): [DRI2] Setup complete
    [ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
    [ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
    [ 6.535] (--) RandR disabled
    [ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.552] (II) AIGLX: Loaded and initialized nouveau
    [ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
    [ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.741] (II) LoadModule: "evdev"
    [ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.744] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.744] compiled for 1.16.2, module version = 2.9.1
    [ 6.744] Module class: X.Org XInput Driver
    [ 6.744] ABI class: X.Org XInput driver, version 21.0
    [ 6.744] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.744] (**) Power Button: always reports core events
    [ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.744] (--) evdev: Power Button: Found keys
    [ 6.744] (II) evdev: Power Button: Configuring as keyboard
    [ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.744] (**) Option "xkb_rules" "evdev"
    [ 6.744] (**) Option "xkb_model" "pc104"
    [ 6.744] (**) Option "xkb_layout" "us"
    [ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.780] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.780] (**) Power Button: always reports core events
    [ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.780] (--) evdev: Power Button: Found keys
    [ 6.780] (II) evdev: Power Button: Configuring as keyboard
    [ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 6.780] (**) Option "xkb_rules" "evdev"
    [ 6.780] (**) Option "xkb_model" "pc104"
    [ 6.780] (**) Option "xkb_layout" "us"
    [ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 6.781] (II) No input driver specified, ignoring this device.
    [ 6.781] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
    [ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 6.785] (II) No input driver specified, ignoring this device.
    [ 6.785] (II) This device may have been added with another device file.
    [ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.785] (**) Option "xkb_rules" "evdev"
    [ 6.785] (**) Option "xkb_model" "pc104"
    [ 6.785] (**) Option "xkb_layout" "us"
    [ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.803] (EE)
    [ 6.803] (EE) Backtrace:
    [ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
    [ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
    [ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
    [ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
    [ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
    [ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
    [ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
    [ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
    [ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
    [ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
    [ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
    [ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
    [ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
    [ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
    [ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
    [ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
    [ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
    [ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
    [ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
    [ 6.814] (EE)
    [ 6.814] (EE) Segmentation fault at address 0x0
    [ 6.814] (EE)
    Fatal server error:
    [ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6.814] (EE)
    [ 6.814] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 6.814] (EE)
    [ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6.817] (EE) Server terminated with error (1). Closing log file.
    Note the segfault in modesetting_drv.so!
    Any help?
    I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
    Is it possible that any old config files can cause this?
    EDIT:
    I tried kernel parameter "nouveau.modeset=0" but it didn't help.
    Last edited by cro (2015-02-26 16:33:19)

    Ok, I guess I solved it by reinstalling xf86-video-nouveau.
    Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
    And why does that lead to mysterious error messages and segfault??
    I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

  • Doesn't work after upgrade to leopard

    I recently upgraded my iMac G5 to Leopard, and had been running GarageBand 2 since I got the computer. After upgrading, when I try to work on a song, none of the tracks show up. Usually one or maybe two will be visible, and when I create new tracks, it just appears over the top of the existing tracks. If I click on the track and drag the mouse down as if to rearrange them, all the tracks appear, but disappear as soon as I let go of the mouse.
    I'm stumped. I really have no idea what could be wrong, and I don't want to spend $80 to upgrade to the new iLife when I don't need it.
    Is this some sort of installation corruption, or is this version of garageband incompatible with leopard? And what can I do to fix it?
    Thanks

    I also had some trouble with this until I stumbled onto a post pointing to David Powers' tutorial.
    http://foundationphp.com/tutorials/php_leopard.php
    Hope this helps anyone else stumbling around the interwebs.
    Oh and make sure to pay special attention to the paragraphs at the bottom
    +" If there are several .conf files to copy, you can use the following command instead:+
    +sudo cp *.conf /private/etc/Apache2/users+
    +_However, if you have previously installed the Mac PHP package from Marc Liyanage, do not copy entropy-php.conf._"+
    Message was edited by: osterbro

  • Applet doesn't show after plugin update & using JNLP, no errors

    We have an applet that worked after the plugin update, then I wrote the JNLP file and can't get it working, it seems to be loading but doesn't show anything. I have tried and searched for possible errors but doesn't seem to be any obvious error for me. Also JaNeLA doesn't give any errors. When I try to load the applet I can see how open two java consoles (maybe this is an error?), in the first console the last output is:
    network: Created version ID: 1.0+
    network: Created version ID: 6.0.18
    basic: Progress indicator deleted: nullAnd in the second:
    basic: Subprogram loaded.
    basic: Applet resized and added to parent container
    basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 309262 us, pluginInit dt 2161125 us, TotalTime: 2470387 us
    basic: Loading Java Miniapplication
    basic: Loading Java MiniapplicationThe jnlp file I wrote is this:
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp codebase="http://genomedu.net/applet/applet/" href="jvrmed_applet.jnlp">
      <information>
        <title>JApplet demo</title>
        <vendor>Jungle waa</vendor>
        <homepage href="http://funforyou.net/"/>
        <description>This is a demo</description>
        <offline-allowed/>
      </information>
        <resources>
          <j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
          <jar href="http://download.java.net/media/applet-launcher/applet-launcher.jar"/>
          <jar href="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar"/>
          <jar href="http://download.java.net/media/gluegen/webstart/gluegen-rt.jar"/>
          <jar href="http://download.java.net/media/java3d/webstart/release/vecmath/latest/vecmath.jar"/>
          <jar href="http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dcore.jar"/>
          <jar href="http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dutils.jar"/>
          <jar href="pixelmed.jar"/>
          <jar href="gdata-core-1.0.jar"/>
          <jar href="gdata-media-1.0.jar"/>
          <jar href="gdata-photos-2.0.jar"/>
          <jar href="gdata-photos-meta-2.0.jar"/>
          <jar href="google-collect-1.0.jar"/>
          <jar href="mail-1.4.3.jar"/>
         <jar href="jvrmed.jar" main="true"/>
       <extension name="jogl" href="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp"/>
        </resources>
      <applet-desc
          name="JVRMed_app"
          main-class="vrmed.app.jVRMed.JVRMed_app"
          width="793"
          height="563">
      </applet-desc>
    </jnlp>
    And the applet tag in the html is:
    <applet name="jvrmed" code="org.jdesktop.applet.util.JNLPAppletLauncher"
          width=793
          height=563 >
       <param name="jnlp_href" value="http://genomedu.net/applet/jvrmed_applet.jnlp">
    </applet>The old applet tag that launched the applet before the plugin update:
    <applet name="jvrmed" code="org.jdesktop.applet.util.JNLPAppletLauncher"
          width=793
          height=563
          archive="http://download.java.net/media/applet-launcher/applet-launcher.jar,
                   http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar,
                   http://download.java.net/media/gluegen/webstart/gluegen-rt.jar,
                http://download.java.net/media/java3d/webstart/release/vecmath/latest/vecmath.jar,
                http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dcore.jar,
                   http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dutils.jar,
                pixelmed.jar,
                gdata-core-1.0.jar,
                gdata-media-1.0.jar,
                gdata-photos-2.0.jar,
                gdata-photos-meta-2.0.jar,
                google-collect-1.0.jar,
                mail-1.4.3.jar,
                   jvrmed.jar">
       <param name="codebase_lookup" value="true">
       <param name="subapplet.classname" value="vrmed.app.jVRMed.JVRMed_app">
       <param name="subapplet.displayname" value="jVRMed">
       <param name="noddraw.check" value="true">
       <param name="progressbar" value="true">
       <param name="jnlpNumExtensions" value="1">
       <param name="jnlpExtension1"
              value="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp">
       <param name="idsession" value="jvrmed_snaps">
       <param name="idprofile" value="1">
    </applet>I know there are many extra parameters in the old version, I have deleted them for debugging because there was the same result with them. What really bothers me is that I don't get any error and the java process is running while tries to load the applet. Anyone had a similar experience and can give a clue?

    Hi,
    since JRE 6u21 the JNLPAppletLauncher doesn't work anymore.
    The Java 3D's jars and native libraries hosted by Oracle.Sun can be accessed by including the extension http://download.java.net/media/java3d/webstart/release/java3d-latest.jnlp. More details can be found here : Java 3D Web Start Release https://j3d-webstart.dev.java.net/release/index.html
    See also the example 'H'weight & L'weight in Harmony' http://www.interactivemesh.org/testspace/appletpropelleruniverse1200x800_J3D.html and search in the Java 3D forum http://www.java.net/forums/javadesktop/java-desktop-technologies/java-3d
    This is an attempt to adapt your JNLP file :
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp codebase="http://genomedu.net/applet/applet/" href="jvrmed_applet.jnlp">
      <information>
        <title>JApplet demo</title>
        <vendor>Jungle waa</vendor>
        <homepage href="http://funforyou.net/"/>
        <description>This is a demo</description>
        <offline-allowed/>
      </information>
      <resources>
        <j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
        <!-- !!! Includes the remote Java 3D / JOGL libraries !!! -->
        <extension href="http://download.java.net/media/java3d/webstart/release/java3d-latest.jnlp"/>
        <jar href="pixelmed.jar"/>
        <jar href="gdata-core-1.0.jar"/>
        <jar href="gdata-media-1.0.jar"/>
        <jar href="gdata-photos-2.0.jar"/>
        <jar href="gdata-photos-meta-2.0.jar"/>
        <jar href="google-collect-1.0.jar"/>
        <jar href="mail-1.4.3.jar"/>
        <jar href="jvrmed.jar" main="true"/>
        <property name="sun.awt.noerasebackground" value="true"/> 
        <property name="sun.awt.erasebackgroundonresize" value="true"/> 
      </resources>
      <applet-desc
          name="JVRMed_app" main-class="vrmed.app.jVRMed.JVRMed_app" width="793" height="563">
      </applet-desc>
    </jnlp>
    Applet tag:
    <!-- please check if codebase="??" is needed -->
    <applet name="jvrmed" width=793 height=563 >
       <param name="jnlp_href" value="http://genomedu.net/applet/jvrmed_applet.jnlp">
    </applet>August

  • The applicatio​n uninstalle​r ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

    Hi,
    I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
    When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
    Thanks,
    Asier
    Solved!
    Go to Solution.

    Hello -
    Are you installing these distributions on a non-English operating system?  If so, the first thing to try would be the workaround listed on this known issue. 
    The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
    NickB
    National Instruments

  • Drag and drop doesn't work after upgrading to Yosemite

    It is strange.  Since upgrading yesterday to Yosemite, my drag and drop does not working consistently.  I use drag and drop all of the time, into emails, moving files from one folder to another, moving music from finder to itunes, etc.  It seems each time I try to drag a file, initially the Finder window I am dragging from crashes and re-starts.  Once it re-starts, I actually am able to move a file as normal for about a minute or two.  After a minute or two, if I try to drag and drop a file, again it crashes and re-opens.
    Does anyone have any ideas?  I did submit a bug notice to Apple, but thought maybe someone would have a fix.

    I'm not sure if this experience relates to your issue but maybe..
    After upgrading my iMac to Yos, I could only select and copy files to relocate them. Frustrating for a couple of days. I eventually found that the setting on my trackpad was for three fingers over a selected file/folder window/etc moved the item to where I wanted. It had automatically changed to this preference. Its called a 'three finger drag'. The video shows a pane being moved but it also applies to all files etc. It can found in preferences/trackpad/point & click. Here you can turn it off if that is hat is causing the issue. Otherwise no software solutions I'm aware of. Good luck.

Maybe you are looking for