Header not getting  displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is  for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
    next       --> NEXT
in next page
  page---> NEXT
  next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Similar Messages

  • How to automatically link a page to the next page in the next spread

    Hi everyone,
    I created a master page in which the two pages are linked( text frame on the page). When I apply the master page to the pages, on every same spread, two paged are linked, but not between spread. How do I automatically link the second page of first spread to the first page of the second spread? so all the pages will be linked in sequence. Thanks a bunch!
    Simon

    The InDesign Place command is fundamentally different from the Quark Get Content commands (as is the handling of frame content -- inifintely easier to change content type in ID). To palce content in ID you don't need to have a frame available to hold it, though you can if you like. Master frames are seldom required, or even helpful in many circumstances -- things like magazines with a rigid structure of mixed image and unbalanced column heights are one example where they ARE helpful.
    When placing text you have several options. If there is no frame, click the loaded cursor where you want the text to be and ID will draw a text frame on the fly. The top of that frame will be at the y-coordinate where you click, it will fill the column guides surrounding the point at which you click, and iut will extend downward to the bottom margin guide. If there is more text than will fit you'll see a red plus sign in the frame outport that you can click to pick up the overset.
    Still with no frame, you can click and drag to define a frame, or with an existing empty frame you can position the cursor over the frame (you'll see the icon change to include surrounding parentheses) and click to flow text into the frame and any addtional frames that may be threaded with it.
    There ae several options for threading. If you've made master frames and threaded them, hold down the Shift key when you click iniside the frame and InDesign will add pages based on the last master in the thread untill all of the text is placed. If there are no master frames, holding shift will add frames on the fly, and pages to hold them. These frames will fill the column guides from top to bottom margin guide.
    Holding the Alt (Opt) key instead of Shift puts you in semi-auto flow mode and text will be added one frame at a time (or one group of threaded frames if you click inside a thread), but will leave the place cursor loaded so you can add a new frame or click inside another existing frame. You can swith from semi-auto-to full auto at any time by changing keys, or release the key to just place text in the last frame. Holding Alt + Shift puts you into Autoflow to end of available space mode, wich will fill existing pages, but not create new ones.

  • Child forms are not getting displayed when user is linked through the targe

    I have provisioned the users to OID through OIM and we have the three child forms(USRB_ROLB,USRB_GRPD,USRB_NBNB) which work well when the user flow normally. Our normal flow implemented is that user comes from OHCM and get created in OIM and then get provisioned to AD and OID. We have also implemented the OID target recon. When we create the user directly in OID and then create the user through normal flow ie from OHCM to OIM) as expected the create user task fail as the user is already present in the OID (target system). Then after running the OID target recon the user is getting linked but its not showing the child forms in the new process form created after running the target recon.
    Please let me know if you require more information.
    Please let me know if anybody has encountered this issue and the steps to resolve the same

    what happened when you run target recon without creating user in oim(or just create user in oim without access policy and then run target recon)? Is this work fine?
    If no means you have to verify your child table mapping. But if above work then this the Produce/connector issue and may you need to raise SR

  • How do I get a table on pages to continue onto the next page if the text is too long?

    I like to make a table to organize information. I just make it like a box. I like to do this for my lesson plans since I am a teacher, but I can't get all my information on the one cell and it just disappears. I attached the picture to help show you what I mean. Cell 4 has more information but it doesn't continure.

    Cells will not split in Pages.
    You should be able to organise your layout without using tables, not that tables are bad pre se, just that they are not an option here.
    If this is important to you, try LibreOffice [free].
    Peter

  • The next page in not displaying in the SAP Script

    Hello,
    I had one SAP script. There were two pages in the script and i mentioned the next page also for the FIRST and NEXT page as
    First - next page --> next
    and next -- next page --> next
    Now, I am having 3 items which needs to be gets displayed using SAP script.
    The first two items displayed properly but the third item is not getting displayed, as of the size of main window is small.
    Whenver i am increasing the size of main window the third item gets displayed propely.
    But i guess whenever the data will get overflow in main window then it should gets displayed in the next page, this is not happening in my case.
    Can any one tell me, how to display the next page whenver the data will get overflow in main window?
    Please help me with this.
    Thanks in advance
    Regards,
    Darshana

    Hi Darshana,
    if you use text element for the item output, you will need same text element on NEXT page. Check for Typos. Switch on sapscript debugger and check what happens.
    Regards,
    Clemens

  • How to get dynamic fields to spread to the next page?

    Thanks to a couple of wonderful folks on this board. I have found a way to get my dynamic field to move and I have gotten the static text fields below that to move. Now I have another problem. As my dynamic field has expanded towards the end of the page. The static fields ahead of it have disappeared. I know that there is a setting to have the static fields move to the next page. Or is there a way to do it? I would love some help on this.
    Thanks in advance

    I had this issue. I had to wrap the static fields below in a sub form and change the settings on that sub form to flow with content like I did with the original text box. This will push the static forms to the next page on the form, but there is one problem with this that I haven't gotten around. When the text box spans multiple pages, printing the page will not print all of the text. For example. A text box where 45 lines of text are entered, 20 are on the first page, 25 are on the second page. It will display properly, but when printed the text that prints on page 2 will be the same text you see on page one. If I wasn't clear enough on moving the static fields, let me know. I can give you the steps. Hopefully the printing thing won't cause you grief.

  • Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

    Pages '09 v4.1
    Problem 1:
         I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
         However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
         On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
         Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
    Problem 2:
         Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
    So there you have it. Christmas is over and its back to work. Thank-you for your attention.

    Regards re-positioning a table:
    I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before -  the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
    Page 1 left side.
    TEXT 1-line as 1-column
    TABLE (5-rows)
    TEXT (2-columns) 14-lines left column and 13-lines right column.
    [Layout Break] otherwise the above textual columns would be all on the left side of the page.
    TEXT 1-line as 1-column
    * The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
    Page 2 right side.
    A 2-page table flowing or breaking into a 3rd page.
    Page 3 left side.
    The overflow of the subject table.
    [Layout Break]
    [Section Break]
    Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

  • '@' not getting displayed in the ALV report

    Hello,
    I am facing  a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
    can anyone please help me in resolving the issue.
    Thanks in advance.
    Thanks and Regards,
    Santhosh Guptha N.

    @ is a default value as per ALV internal process. This is used in icons .
    I think this is causing the confusion.
    Check in the fieldcat if there is any adjsutment to be made to handle this.
    Br,
    Vijay

  • Material type not getting displayed in the cube........

    Hi,
    In my infocube material type for one of the material is not getting displayed.
    When I check in the content of the cube for this material all the fileds are getting displayed except material type.
    However it is present in the material master data from which it is put into the update rules to populate in the cube.
    Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
    Can some body let me know what could be the reason.
    Thanks,
    Jeetu

    Hi Jeetu,
    can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
    You should adapt your scenario:
    - first do not use the standard attribute derivation during your URules: performance is very bad.
    - implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
    - implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
    Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
    hope this helps...
    Olivier.

  • Displaying Field Names in a list on the next page

    In my BIP template I have a table that lists field names and underneath I have a for-each statement that lists values.
    Is there anyway that I can list the field names on the next page when the number of records start to run onto the next page?
    Thanks
    Steve

    Select the field names row, right click -> table properties and check the 'Repeat as header row at the top of each page'

  • Footer Not Getting Displayed IN OO ALV

    HI Experts,
    I am using OO ALV and wish to display a footer for it.
    but the footer is not getting displayed.

    Footer for each page means you should use the EVENT END_OF_PAGE this will trigger , but not in display, but when you print the report it will work.
    Footer at the end_of report then you have to use END_OF_LIST event.
    BCALV_TEST_LIST_EVENTS
    check the above program to test the events.

  • How can I disable the previous button in the first page and the next button in the last page?

    Hi all,
    I have created a new skin for a webhelp by modifying the layout and the buttons. However, I am not able to find a way where in we can
    disable the previous button ini the first page of the webhelp and hte the next page in the last page of the webhelp. If both the next and previous button is visibile in the first and last page, it is sort of misguiding the user.
    I am using Robohelp 9.
    Please advice.
    Thanks,
    Parag

    I think you are mixing Previous and Next in a browse sequence and the Previous and Next that you get in the browser itself.
    In a browse sequence, they are automatically disabled at the start and finish. When in the first topic in the sequence only Next will be enabled, when in the last topic only previous will be enabled.
    Previous and Next in the browser are working on the topics your user has viewed which is not the same thing.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Text not getting displayed in PA40 action.

    Hello All,
    We upgraded from 4.6 to 5.0. When I doing the hiring or any other action, the text for the action type, reason for action or any other field is not getting displayed. Even when I select the entries the text for that is not getting displayed.
    like its displaying only 01- for Action type hiring.
    Thank You all in advance for your reponse!
    Chakri.

    Hello Sharath,
    I checked this and this table is having all the values properly maintained. Language, Action, Name of the action is maintained. Is there any place where we need to activate this in order for us to see the name of the action type also when we select an action in PA40.
    Thanks a lot for your response.
    Chakri.

  • I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

    I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page,  but I can't work out how to do it - any suggestions would be greatly appreciated

    brendanfromsydney wrote:
    What are the different opinions on why pages should not achieve this?
    As far as I know, Apple is free to choose to offer this or that feature.
    They never said that they want to clone Word or even compete with it.
    Differences between tables in both worlds are numerous.
    In Pages (or Numbers)
    - we can't sort a single column
    - we can't sort by row
    - we can't insert or remove a single cell
    - a cell can't cross pages boundaries
    If I understand well these design choices match :
    ++-+-+-+-+-+-+-+-++
    Apple Human Interface Guidelines:
    Apply the 80 Percent Solution
    During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
    If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
    +-+-+-+-+-+-+-+-+-++
    Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can I have a PDF in Full Screnn Mode without it goinging to the next page when you click?

    I'm trying to make, let's say, a mini website using a pdf that includes hyperlinks. I also want the PDF to open in FULL SCREEN Mode. For some reason, when in FULL SCREEN mode you can click on the links (works excellent), but when you click on an area of the page that is NOT a link, it forwards you to the next page in the PDF.
    I ordered the full version of Acrobat X Pro, and thought that it would work saving it out of Powerpoint (original file), but I had to disable the add-in because it just kept on crashing.
    I can't seem to find where i can control the "Do Not Forward to Next Page OnClick".
    Help!
    Thanks!

    If you just purchased Acrobat 10, you might be eligible for a free upgrade to Acrobat 11, which is suppposed to have much improved export to PPT.

Maybe you are looking for