Header Text pop up not coming up when creating Quotation with reference when created from CJ20N

I have done my configuration in VOTXN and it works.
If I create a quotation with reference with transaction VA21 the pop up comes up and the header texts are copied.
But if I do the same from transaction CJ20N (it also executes transaction VA21) the pop up windows does not come up and the text is not copied.
If someone can please tell me why this is happening?
Regards,
Carlos

Hi carlos,
with reference to existing quotation you are creating new quotation ?
but Quotation creation from project will done using DP81 ( not by VA21)
can you explain a bit ?
thanks
santosh

Similar Messages

Withholding Tax Pop Up Not coming

Hi Guys,
I have configure WH tax and assigned it to the Vendor Master data.
However the WH Tax pop up is not coming up.
Please advise what is missing.
Thanks,
Kris..

Hi,
I have done the settings but still it does not pop up.
I am using the FB60 transaction to enter the vendor invoice. Then in the vendor master i have assigned the WH tax type , code and clicked the Liable to button.
Also in FB60 on the GL line item, I am giving a tax code and Jurisdiction code.
In FB60 on the Withholding Tax tab, the system is showing the two WH tax types that i entered in the vendor master data.
However the Tax base is showing as 0 there.
But when i simulate the document, it shows the With holding tax and then also when i post the document.
However why is the pop up not coming and also the base why it is showing as 0, i am not understanding.
Thanks..
srikanth..

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

TS1363 My ipod 6th generation is not coming up in my devices with itunes. I am using a new computer with windows 8 and it is shoing up in my computer but not in itunes. any suggestions

My ipod 6th generation is not coming up in my devices with itunes. I am using a new computer with windows 8 and it is shoing up in my computer but not in itunes. any suggestions

I am having the exact same problem but as yet have not found a solution.

Create Order with reference to Contract header

Hello,
In copy control from Contract to order can you please tell me if it is possible to copy only header data?
Meaning ,when creating Order with reference to contract I would like to copy contract header data only
Thanks,
Dave

Hi Dave,
You can try this,
Go to VTAA--> Select your copy control of contract to order --> Click at details --> Remove the check box of
Copy item number
Complete refrence
Then double click at "Item" left side --> Select your item category --> Click at details --> Remove the check box of
Copy Schedule lines
Then try to create and revert back with your findings,
Regards,
MT

Error when creating PO with reference to PR

Hello Expert,
When creating PO with reference to PR I encountered with one error i.e. system is taking into consideration one to one relation of PR line item to PO line item. For example: I have created PR with one line item for XYZ value and with reference to PR line item I am creating one PO but with two line items in PO that means I am splitting PR value into two line items in PO, 1st line item with zero tax and second one is with tax.
So there is one PR line item but in PO I am creating two line items with reference to single PR item. In this case system is giving error saying Item 001 WBS element XXXXXXXXXX budget exceeded. message no: BP604. However if I create single line item in PO then it wont give any error.
Please suggest any customization setting is done for such kind of behavior of the system.
Thanks
Shyam

Hi,
SAP creates the requisition with item category "U" even in case of cross-company (intercompany) purchase requisition.
When converting it to PO the item category becomes blank - as I tried and I got no error message.
Please check your settings under SPRO > MM > Purchasing > Purchase Order > Define Document Types (V_T161). You will see (if standard settings have not been changed) that NB requisition type with "U" item category is allowed for NB purchase order type with " " (empty) item category.
Regards,
Csaba

I spend 5 months in Florida and 7 months in Ontario, Canada. Can a Verizon Samsung Note ll be unlocked and used with a sim card from another carrier in Ontario?

I spend 5 months in Florida and 7 months in Ontario, Canada. Can a Verizon Samsung Note ll be unlocked and used with a sim card from another carrier in Ontario?

Yes, you should be able to use a local SIM card from a carrier in Ontario. You should not have to do anything prior to doing so.

Header text in contract not transferring to PO

Hi,
I am creating a PO referencing a contract. I maintained header note in contract. Now, when I am creating a PO referencing to the contract the header note in not transferring to the PO. The F1 help in header note in contract shows if it will not be selected it will not be processed. When I selected and tried to save it the system shows no data changed.
Is there any configuration setting for this.
Need your help.
Thanks

Hi Gaurav,
Header Text should certainly copy from Contract to PO just make sure these settings are available in system.
Go to OLME -> Purchase Order ->Texts for PO -> Define copying rules for header texts
It will show you several header text types
Select the text id go to text linkage here Source Object contract should be there (with Fix indicator blank or *)
if not then maintain the same and test again

Text messages are not coming in

apple changed updated my new eamil address in itunes and now my messages are not coming in.help

Hi nancy183,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy

SAP is not coming up after system refresh with Export/Import option

Hi,
I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Wed Aug 05 10:48:17 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno      00
M sid        IDS
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode
M pid        844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 844) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          20328     (1452)
M DpShMCreate: sizeof(tm_adm)          2969176     (14772)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (424)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05FE0040, size: 3391480)
M DpShMCreate: allocated sys_adm at 05FE0040
M DpShMCreate: allocated wp_adm at 05FE1B88
M DpShMCreate: allocated tm_adm_list at 05FE6AF0
M DpShMCreate: allocated tm_adm at 05FE6B18
M DpShMCreate: allocated wp_ca_adm at 062BB970
M DpShMCreate: allocated appc_ca_adm at 062C1730
M DpShMCreate: allocated comm_adm_list at 062C3670
M DpShMCreate: allocated comm_adm at 062C3688
M DpShMCreate: allocated vmc_adm_list at 0630A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0630A380
M DpShMCreate: allocated wall_adm at 0630A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 05 10:48:18 2009
M calling db_connect ...
C Prepending e:\oracle\IDS to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPIDS's password
C Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05B17398   05B1C458   05B1BEC0
C Attaching to DB Server IDS (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84)
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11395]
C Try to connect with default password
C Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   05B17398   05B1C458   05B1BEC0
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11395]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Wed Aug 05 10:48:18 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 844) [dpnttool.c   357]
I have checked database connectivity with the command 'r3trans -d', it got finished with the return code 0012 and the trace.log file is showing the following information.
=======================================
4 ETW000 r3trans version 6.13 (release 640 - 17.07.08 - 08:11:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 05.08.2009 - 10:52:31
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Wed Aug 05 10:52:34 2009                                  0.000000
4 ETW000 [dev trc     ,00000] db_con_init called                                        0.000000
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                                 0.000000
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                    0.000000
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0          8449 0.008449
4 ETW000 [dev trc     ,00000]      using "f:\usr\sap\IDS\SYS\exe\run\dboraslib.dll"
4 ETW000                                                                              37 0.008486
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                        18 0.008504
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              27 0.008531
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.220)
4 ETW000                                                                             219 0.008750
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              27 0.008777
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              36 0.008813
4 ETW000 [dev trc     ,00000] New connection 0 created                              26 0.008839
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              34 0.008873
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         22 0.008895
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              25 0.008920
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              32 0.008952
4 ETW000 [dev trc     ,00000] Setting DIR_CLIENT_ORAHOME is not set as environment variable,
4 ETW000                        assuming using instant client with unspecified location.
4 ETW000                                                                             227 0.009179
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                        130 0.009309
4 ETW000 [dev trc     ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000                                                                              32 0.009341
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8         23827 0.033168
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPIDS's password           34 0.033202
4 ETW000 [dev trc     ,00000] Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000                                                                              35 0.033237
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              32 0.033269
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1   0253CDB0   02541E18   02541880
4 ETW000                                                                             112 0.033381
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       29 0.033410
4 ETW000 [dev trc     ,00000] Allocating server context handle                      25 0.033435
4 ETW000 [dev trc     ,00000] Attaching to DB Server IDS (con_hdl=0,svchp=025417D4,srvhp=025423DC)
4 ETW000                                                                              51 0.033486
4 ETW000 [dev trc     ,00000] Assigning server context 025423DC to service context 025417D4
4 ETW000                                                                           41860 0.075346
4 ETW000 [dev trc     ,00000] Allocating user session handle                        47 0.075393
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000                                                                              50 0.075443
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            4381 0.079824
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              31 0.079855
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         23 0.079878
4 ETW000 [dev trc     ,00000] Try to connect with default password                  80 0.079958
4 ETW000 [dev trc     ,00000] Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000                                                                              28 0.079986
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              31 0.080017
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1   0253CDB0   02541E18   02541880
4 ETW000                                                                              32 0.080049
4 ETW000 [dev trc     ,00000] Assigning username to user session 0254AFA8           19 0.080068
4 ETW000 [dev trc     ,00000] Assigning password to user session 0254AFA8           25 0.080093
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000                                                                              32 0.080125
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            1691 0.081816
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              28 0.081844
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         18 0.081862
4 ETW000 [dblink      ,00428] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 428]
4 ETW000                                                                             119 0.081981
4 ETW000 [dblink      ,00428] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 428]
4 ETW000                                                                              30 0.082011
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'IDS'"
=================================================================================
Kindly suggest me the solution to resolve the issue.
Thanks & regards,
Mogileeswar

Please check the logs it is clrerly mentioned thet your sapsystem is not able to connect to database.
ERROR => CONNECT failed with sql error '1017' [dbsloci.c 11395] B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ] B ***LOG BY0=> ORA-01017: invalid username/password
Check the Note------Note 713685 - Hom./Het.System Copy SAP Web AS 6.40
run these commands:
brconnect -u / -c -l E -f chpass -o SAPSR3 -password whatever_you_want
sqlplus /nolog @sapdba_role.sql SID NT
Also check the parameter DBS_ORA_SCHEMA is set to SAPSR3.
Also read note 400241.
Thanks
Rishi Abrol

Restrict to create PO with reference to PR not assigned budget

Hi all,
I'm MM consultant and we don't have FM specialist at present so I'd like to ask maybe stupid question:
We have FM Budgeting on Purchase requisiton stage. When MRP creates PR's they are not in budget. Using these PR's the system allows to create PO's, RFQ, Contracts.
The question is: could I restrict this using standard setups or ABAP only ?

Hi Timur,
If I have understood correctly:
You create PR's from MRP and do not consume budget (i.e. you do not want to run FM_MRP_PR)
it is possible to create PO's referencing those PR's. In those cases, you would not want those PO's consuming budget either. Is my understanding correct? In such case, you could update those PO's statistically in FM.
If you are in this case, let us know so that we can let you know more details.
If what you actually want to achieve is to prevent those PO's from being created, maybe MM could have a better thought (you may use the MM Forum for that purpose):
[SAP ERP - Logistics Materials Management (SAP MM);
cheers
Mar

Have created PO with reference to a PR that is not fully released

Dear SAP Experts,
We are encountering an issue during creation of PO. We can create a PO with reference to a PR that is not fully released. The PR has not been fully released in the past.
1. PR was created and was released upto web approval (PR is currently not fully approved)
2. PO was created with reference to the PR that is not fully approved and also with reference to an RFQ. The PO was created even if the PR was not fully approved.
We tried to simulated the steps above in development server and PO cannot be created because of the error 'Purchase requisition 168151, item 00110, not released for ordering'. However, in production, the PO was created and the PO created was fully released already.
Any inputs as to why this happened? Your help will be highly appreciated.
Jessica Cruz
Software dev. analyst
Smart Communications, Inc

Hi Jessica,
While creating the PO you might have entered the PR No. in PO Item overviewbut it might have happened knowingly or unknowingly the PR No. is deleted from Delivery Schedule tab at Item details of the PO either during PO creatin or PO change mode.
Generally system updates the PR status by validating the PR No. in delivery schedule tab of the PO.
Though the PR No. is reflecting at PO Item overview,.as there is no PR No. in delivery schedule tab it is not checking wether the PR is released or not.
Bye
Sridhar Thota

My TEXT messages are not coming in except for when im on wifi...this never happened before to me! if i turn Imessage OFF on my phone and ipad it still doesnt come in! HELP

im not getting my TEXT messages anymore until i get around Wifi and then they flow in....i have Imessage on on both iphone and ipad...i tried turning OFF Imessage and they still dont come in!

If they are coming in when you are around wifi, are the bubbles blue or green? SMS messages (green) are cellular and wifi would have nothing to do with this. They won't be carried over wifi. If they are blue bubbles, then they are iMessages and are coming in when you get to wifi because you are finally able to receive data, since you say you have cellular data turned off.

I_STEP = 3; Error Message Pop up not coming on BEX

Hi Gurus,
i am having problem getting the ERROR MESSAGE POP UP on the BEX after validating the DATA user entered in the selection screen.
Here is my scenario:
user enter the values in the selction screen and i am validating those values in my varaible exit in I_STEP 3. When the user enters the incorrect values i am calling message class
MESSAGE E000(ZBW).
i am mainining the message class in SE91 and its all there.
This is working fine when execute the query in RSRT and i get the error message in the botton scrool bar. when i am execute this in BEX, its getting dixconneced with the message
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
connection closed without message (CM_NO_DATA_RECEIVED).
Please let me know if there is a solution for this. we are in BW 3.5 support pack 20.
Thanks
Krishna
Edited by: krishna guttapalem on Apr 23, 2008 6:05 PM

Hi,
i have this opened this another thread too. search with the string "variable in selection screen" in business intelligence - business explorer. you can find the solution in that thread. i tried to post the link for that thread here but i am not able to do that.
thanks
krishna

Address Selection Pop-Up not coming!

Hi Experts,
I have maintianed two address for a business partner.Ideally when I add this Business Partner to a transaction say-Complaints or Opportunity, I should be getting a address selection pop-up.Does anybody know how to generate this pop-up?
Is there any SPRO customizing for this?
Thanks and Regards,
Rohit
Just to add some more info:
In many places i have seen a message(link) on the top saying-Partners have alternative address.When we click on that link, an address selection pop-up is displayed. I am not getting that message to trigger the pop-up.What can be the reason?
Edited by: rohit raturi on Aug 22, 2008 4:21 PM

Hi,
Please check that you have added the addresses as standard address & all the addresses do not have expired validity date range (addresses are valid on today's date).
Let me know if this helps...!!
Best Regards,
Vishant Jain

Header Text pop up not coming up when creating Quotation with reference when created from CJ20N

Similar Messages

Maybe you are looking for