Headphone Jack Doesn't work in XP Connected to 24" Cinema Display

I am trying to get audio out of my headphone jack when connected to my cinema display and booted into XP (OSX works fine). The audio always routes through the display speakers when booted into Windows XP, even when I plug headphones into my macbook pro's headphone jack. What settings or drivers do I need to enable my headphone jack to work in XP when I have my cinema display connected?

I have the same problem too, but using Windows 7 and Boot Camp V3.1. Headphones work fine if I don't plug in the USB from the Display to the computer.
Additionally, right after installing Windows 7, my Macbook Pro set the audio headset jack to 'optical audio' (with the glowing red LED), which I had to disable manually to get the headphones to work.
To Nick4597, for me, the headphone issue wasn't there in XP, just Win7. Maybe the latest Boot Camp drivers disabled the feature?

Similar Messages

  • Satellite A205-S4777 headphone jack doesn't work

    My headphone jack doesn't output any sound when headphones are plugge in.  Instead the sound is played throught the speakers when headphones are plugged in.  Any suggestion on what to check or do?
    Solved!
    Go to Solution.

    Let's try reinstalling your sound drivers.
    Realtek Audio Driver for Windows Vista(v6.0.1.5406 Logo; 05-17-2007; 17.84M)
    - Peter

  • Headphone jack doesn't work in Mac OS X 10.5.6

    My headphone jack stopped working on my less-than-30-day-old MacBook Aluminum. Without headphones internal speakers functioned normally. When I plugged in headphones there was no sound. With headphones plugged in System Preferences > Sound indicated that a digital optical cable was plugged. I tested the headphones in another device and they worked. I tried another set of headphones and they don't work. I tested the system with Bootcamp/Vista Home Premium and the headphones worked, so the problem was not the hardware, it must be the OS. I took my Mac to the Apple Store and the Expert says he "cleared the Kernel cache", at which point the headphones jack started working again. I used headphones last night. Tonight, the headphones stopped working again, but, after about an hour, as I am typing this post, I see they have suddenly started functioning again. Now I have to correct all my grammar in this post to indicate past tense. What is wrong with Mac OS X, why do the headphones spontaneously stop functioning, what did the Apple Expert really do, and how do I "clear the Kernal cache" for myself?

    Use OnyX to clean your system and User cache files. It's free to download. Just click on the "Automation" tab, check the boxes and run it.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Headphone Jack doesn't work and internal speakers are stuck in mute.

    So I have an 18' macbook pro with a 2GHz Intel Core i7 and running version Mac OS X (10.7.5). I recently dropped my computer off my lap while my headphones were still in. The headphone jack smashed into the computers headphone output jack I took out the headphones and they still work but now no matter what pair of headphones I use I cannot hear anything when plugged in. As well when I take out the headphones the sound output does not switch back to internal speakers but says Digital Out. I know the speakers work because when I was messing the out jack because I read when a red light is on inside the jack (which it goes on and off) means it is stuck in mute. That however has not worked so far and neither has putting in and taking out the headphone jack.

    Use OnyX to clean your system and User cache files. It's free to download. Just click on the "Automation" tab, check the boxes and run it.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Headphone Jack doesn't work for all headphones

    I don't have apple haeadphones anymore and I realized that not all headphones work on my ipod4. I have to turn my headphones to a certain angle to get them to work all the time. help?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem. However, from your description you have a bad headohone jack.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Headphone jack doesn't work after replacing housing

    Anyone else here have this problem? has anyone talked to RIM about this?

    I recently had the same problem. My iPad, bought in November, worked until about a week ago. My wife took it in to Apple and it was replaced immediately. Unfortunately, my new iPad is having the same problem. I've "pounded" my headphones, car jack, home speakers and nothing works. They all work on the iPhone.
    I think there's a serious problem with the headphone Jack and we're just now finding it. I see similar responses to the iPad 2. I'm taking mine back into Apple this weekend and proving my point.

  • Headphone jack doesn't work in bootcamp  windows 7

    Any ideas?

    The sound card works fine and the speakers are bgood. The audio just cuts out when you plug in a set of headphones or external speakers in Windows 7. On OSX it is fine. 

  • Headphone jack doesn't work with 4.3 update

    Regular sound works, although it sounds very different than 4.2' but when I went to use headphones today, nothing. I tried flipping the new mute/rotation feature just in case and it didn't make any difference. I use my iPad at school and need headphones. Help? Thanks!

    Try a System Reset:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
    A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
    Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162.
    http://support.apple.com/manuals/#ipad
    Finally, a less thorough version of the Guide is included as a Safari bookmark and a more thorough version of the Guide can be downloaded at no charge via iBooks.

  • Headphone jack doesn't work

    Help me please. If I inserted the headphones in my Xperia z1, the sound comes out of only the right side.
    It was working fine but I don't know what happened.
    I checked my headphones in another device and it works fine. Also, I tried other headphones in my Xperia but i had the same issue

    I would say that the problem has to do with your previous issue (water damage)
    http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Water-got-inside-my-Z1/m-p/734985#M28574
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • My macbook pro's headphone jack doesn't work anymore

    Every time when I plug in my headphones they almost fall out, and I just don't know what to do.

    System Preference > Trackpad > Point & Click > Secondary click
    Make sure that "Secondary click" is enabled.
    Click the  black downward arrow to get the pop-up and pick your choice.
    Best.

  • My PC just updated and now my headphones jack doesn't work. Why is this?

    Everything was working fine until the update and I have no clue what updates were done. It was the mass that update when you go to close down the system.  I have a HP Pavilion dv6-3250us.

    Hi,
    Restore system to this point where you remember that everything was working without any problems.
    Resource:
    How to Do a System Restore in Windows 7
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Headphone jack doesn't work as it should

    Hello everyone,
    I recently updated to the iOS 8 and the audio in my iPhone 5 EarPods didn't played very good. The audio was really quiet and when I plugged them into my friends iPhone 5 running iOS 8 too, I played the same song but the audio was much, much louder than my iPhone. Also the audio was much clearer than my iPhone. I tried to downgrade back to iOS 7.1.2 but same problem. And also as i needed to have "loud" audio setting, every next track, the audio was at the maximum level every next track! Did anyone experienced those problems? Sorry for my bad english and I thank to everyone who aswers me

    Hello there david19au,
    It sounds like your audio is lower than you expect when listening to audio on your phone, whether you are using iOS 7 or 8. I would start by quitting all the running apps first:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it. 
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    If that does not resolve the issuem I would next checking to see if the volume is limited in your Music settings.
    Go to Settings > Music to set options for Music, including:
    Volume Limit
    Music settings - iPhone
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Headphone/Microphone jack doesn't work at all

    Hi,
    I have a fairly new toshiba satellite C50-B
    My part number is: PSCLGU-00G03Q
    I tried headphones for the first time the other day and it appears my headphone jack doesn't work. My laptop speakers work just fine, as well as my laptop mic, however no headset I plug into my headphone/microphone jack works. Right next to it is a single USB port which doesn't work either, I am hoping to hit two birds with one stone... The USB just gives an error with anything I plug into it. My other two work fine.
    Any help will be much appreciated. Thank you very much.

    I'd recommend calling customer support as soon as possible.
    - Peter

  • Buttons (silent, volume, on/off) and headphone jack no longer working!

    All of a sudden my iPhone stopped working - that is, none of the buttons work except the round one below the screen. None around the sides work any more and the headphones jack doesn't work either. I have the latest os/firmware (3.1). This happened totally out of the blue. I know of nothing special that could have caused it. Just happened one day when I tried to use headphones and noticed the volume kept sounding through my speakers rather than the phones. And then I noticed the silent didn't work, the volume up/down button on the side didn't work, etc.
    I can not turn my phone off so I tried to let the battery die out and then recharge it which resets it. But that didn't help either. Buttons still aren't working.
    This means I can't turn on silent, adjust volume, listen using my headphones or use hands-free.
    Any ideas why?
    I purchased my phone back in Aug '08 so it's just out of warrenty, of course!

    Problem is since I bought mine online, I have to send it in to the online store to have it checked. And they couldn't even promise they could, or would do anything.
    I live in Norway and there is no Apple store. They have "certified dealers" but they won't look at my phone since I didn't buy from them.
    Bottom line is I will be without my phone for at LEAST a week for them to look at it, and then there is a good change they won't fix it for free or even at all.
    That's why I was hoping for some advice from somebody that may know about this...

  • T420 Headphone Jack won't work in Windows 7

    Hi all,
            I've recently got a T420 4180A32 (Conexant CX20672) and the headphone jack doesn't work under Windows 7. It works when I boot (natively) into Ubuntu, but obviously when I run a Virtual Machine into Ubuntu through Windows, it doesn't work either.
    I have:
    - Uninstalled and reinstalled the driver version that came installed.
    - Installed,  Uninstalled and reinstalled a newer driver version.
    - Uninstalled the old driver and installed the new one.
    - Reverted to using the generic High Definition Audio driver. The speakers work fine but again, headphone jack doesn't.
    - Established that it obviously isn't a hardware problem.
    - Uninstalled then reinstalled DirectX
    - Tried various headphones on the off chance that they were the problem. They weren't.
    I haven't:
    - Done a full reinstall of windows 7 (although I might)
    - Tried Windows 8, although again, I might as I have an unused licence for it and I really want my headphones to work.
    That's about all the info I can give. Besides this problem, the laptop runs great!
    Any help would be appreciated.
    Thanks

    I have now noticed that when using ubuntu the headphones work but that won't mute the speakers, so I am starting to think it could actually be the jack, as the headphones, as a device, arent dectected by ubuntu either, they just work because they are plugged in, I guess it's the way each OS works.
    Check if that happens in your computer as well. Also, where did you check the prices of compatible sound cards? Which should I buy? I may go to a Lenovo store to get it fixed.

Maybe you are looking for

  • Goods return from customer

    Dear all, Customer orders quantity 1000kg and return 800kg for that sales order. In this case, (1000-800) = 200kg will treat as loss. In addition, we will delivery 200kg to customer for compensation. How can I solve this case? Best Regards, Amy

  • Multiple values for single field

    hi In order to upload Purchase order details, how you handle multiple values for a single field?        Eg: Item field may contain no. of values for a record

  • Connect to my database

    Hi All.... As the topic summary states: I am a "newbie with no clue!" I own, (and play site administrator) for an online e-commerce business that first made its internet debut back in 1999. My site is written in Cold Fusion and is hosted by a 3rd par

  • I would like someone to tell me how to use the dstp address parameter(url) in the datasocket connections.What to write in there, destination/source url.

    What do i do if i right to a datasocket..Do i have to make a special file on my server, How do i create a datasocket server.?? Do i use the same "address" to read a datasocket?

  • Bootcamp Crash when installing drivers

    I have a 15 inch Retina Macbook Pro (Mid-2014) and whenever I try to install the drivers for windows 7, I get a BSoD halfway through, reversing the whole process. I have tried getting the most up to date drivers, I have searched all over google, I ha