HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP.  On Site properties I have set client communication : HTTP or HTTPS  and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied.  I checked the log 'datatransferservice.log'  and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf).  Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet.  Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729 
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014  8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014  8:22:19 ===

Similar Messages

  • Error sending DAV request. HTTP code 500, status 'Internal Server Error'

    Hi All,
    I am getting the error On SCCM R2 Environment .. on the client machine we are getting the below issue and software center 
    is not showing any information..
    While checking on the client's DatatransferService.log.. i am getting the below issues..
    Successfully sent location services HTTP failure message.
    Error sending DAV request. HTTP code 500, status 'Internal Server Error'
    GetDirectoryList_HTTP('http://MachineName:80/SMS_DP_SMSPKG$/7ea0b105-5592-48cd-8b8e-81777537c34f') failed with code 0x87d0027e.
    i realize it because of Isapi filter issues.. can any one guide me to resolve the issues..
    KJSUBBU

    Hi,
    In addition, I recommend you check whether you have additional Authentication methods (like ASP.NET Impersonation) enabled. 
    Disable the authentication method and try again.
    Also, please review the link below, here is a article about troubleshoot ISAPI filter issue.
    Error message when you visit a Web site that is hosted on IIS 7.0: "HTTP Error 500.0 – Internal Server Error"
    http://support.microsoft.com/kb/942031
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 - Error sending DAV request. HTTP code 401, status 'Unauthorized'

    Hi everyone!
    I have a SCCM 2012 install with SQL 2008 R2 RU6 on it. All roles on the same server.
    Application deployment was working last week and suddently, today, it's not working anymore.
    Client fail to download applications. When I see the log "dataTransfertService.log" I got:
    <![LOG[Enumerating DTS jobs for logged on user 'S-1-5-21-3498061407-3801314532-3722532443-1799'.]LOG]!><time="16:45:51.388-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:135">
    <![LOG[Enumeration of DTS jobs for logged on user 'S-1-5-21-3498061407-3801314532-3722532443-1799' is complete.]LOG]!><time="16:45:51.878-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:151">
    <![LOG[Enumerating DTS jobs for helper user 'S-1-5-21-3498061407-3801314532-3722532443-1799'.]LOG]!><time="16:45:51.878-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:154">
    <![LOG[Enumeration of DTS jobs for helper user 'S-1-5-21-3498061407-3801314532-3722532443-1799' is complete.]LOG]!><time="16:45:51.939-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="3536" file="dtslogon.cpp:170">
    <![LOG[UpdateURLWithTransportSettings(): OLD URL - http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="16:48:31.738-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="ccmutillib.cpp:3083">
    <![LOG[UpdateURLWithTransportSettings(): NEW URL - http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="16:48:31.738-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="ccmutillib.cpp:3095">
    <![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} created to download from 'http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1' to 'C:\WINDOWS\ccmcache\3f'.]LOG]!><time="16:48:31.816-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="datatransferservice.cpp:186">
    <![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} in state 'DownloadingManifest'.]LOG]!><time="16:48:31.816-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="2432" file="dtsjob.h:157">
    <![LOG[[CCMHTTP] ERROR: URL=http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1, Port=80, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="16:48:32.281-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:291">
    <![LOG[Raising event:
    instance of CCM_CcmHttp_Status
    ClientID = "GUID:4D48BE30-A5BE-40C1-A946-B0773DE7C060";
    DateTime = "20120723144832.297000+000";
    HostName = "xxx.com";
    HRESULT = "0x87d0027e";
    ProcessID = 2236;
    StatusCode = 401;
    ThreadID = 4204;
    ]LOG]!><time="16:48:32.297-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="event.cpp:729">
    <![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:395">
    <![LOG[Error sending DAV request. HTTP code 401, status 'Unauthorized']LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:629">
    <![LOG[GetDirectoryList_HTTP('http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1') failed with code 0x80070005.]LOG]!><time="16:48:32.312-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:688">
    <![LOG[Job {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} impersonating Network Access Account.]LOG]!><time="16:48:32.825-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="netaccessaccount.cpp:429">
    <![LOG[[CCMHTTP] ERROR: URL=http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1, Port=80, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="16:48:32.887-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:291">
    <![LOG[Raising event:
    instance of CCM_CcmHttp_Status
    ClientID = "GUID:4D48BE30-A5BE-40C1-A946-B0773DE7C060";
    DateTime = "20120723144832.887000+000";
    HostName = "xxx.com";
    HRESULT = "0x87d0027e";
    ProcessID = 2236;
    StatusCode = 401;
    ThreadID = 4204;
    ]LOG]!><time="16:48:32.887-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="event.cpp:729">
    <![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="ccmhttperror.cpp:395">
    <![LOG[Error sending DAV request. HTTP code 401, status 'Unauthorized']LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:629">
    <![LOG[GetDirectoryList_HTTP('http://xxx.com:80/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1') failed with code 0x80070005.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="3" thread="4204" file="util.cpp:688">
    <![LOG[Job {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} reverted impersonation.]LOG]!><time="16:48:32.902-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="4204" file="netaccessaccount.h:93">
    <![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} in state 'Cancelled'.]LOG]!><time="16:48:33.011-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="dtsjob.h:157">
    <![LOG[DTSJob {451ACA72-8FCC-4083-B7B5-C4C68D5E5786} cancelled by client.]LOG]!><time="16:48:33.011-120" date="07-23-2012" component="DataTransferService" context="" type="1" thread="5616" file="dtsjob.cpp:2771">
    I already verified every single permissions, NAA is configured and has correct rights. I really don't understand what has changed...
    any suggestion???
    Thank you very much!

    SMS_DP_SMSPKG$ has Windows Authentication Enabled.
    IIS Logs:
    2012-07-23 15:10:08 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.79 ccmhttp 200 0 0 339
    2012-07-23 15:11:38 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 38
    2012-07-23 15:11:38 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 166
    2012-07-23 15:11:38 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 2 5 1
    2012-07-23 15:11:39 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 2 5 0
    2012-07-23 15:11:39 10.28.80.98 PROPFIND /SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1 - 80 - 10.28.81.52 SMS+CCM+5.0 401 1 3221225581 11
    2012-07-23 15:11:39 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 384
    2012-07-23 15:13:01 fe80::31df:ba5:7c1:caf6%11 GET /SMS_MP/.sms_aut MPLIST 80 - fe80::31df:ba5:7c1:caf6%11 SMS_MP_CONTROL_MANAGER 200 0 0 4
    2012-07-23 15:13:11 10.28.80.98 CCM_POST /ccm_system_windowsauth/request - 80 - 10.29.73.101 ccmhttp 401 2 5 6
    2012-07-23 15:14:01 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.82.72 ccmhttp 200 0 0 23
    2012-07-23 15:15:40 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.52 ccmhttp 200 0 0 348
    2012-07-23 15:15:55 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.28.81.79 ccmhttp 200 0 0 363
    2012-07-23 15:16:12 10.28.80.98 CCM_POST /ccm_system/request - 80 - 10.29.73.101 ccmhttp 200 0 0 393
    2012-07-23 15:17:06 10.28.80.98 CCM_POST /ccm_system_windowsauth/request - 80 - 10.28.81.79 ccmhttp 401 2 5 0
    In "ContentTransferManager.log" i see that error:
    <![LOG[Starting CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89}.]LOG]!><time="17:11:38.999-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5400" file="ctmjob.cpp:2980">
    <![LOG[Created CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} for user S-1-5-18]LOG]!><time="17:11:39.030-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5400" file="ctmanager.cpp:487">
    <![LOG[Created and Sent Location Request '{996973D0-911C-4929-BE9D-39CB4D759265}' for package Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c]LOG]!><time="17:11:39.092-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332"
    file="ccmpkglocation.cpp:83">
    <![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA]LOG]!><time="17:11:39.092-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332" file="ctmjob.cpp:1432">
    <![LOG[Queued location request '{996973D0-911C-4929-BE9D-39CB4D759265}' for CTM job '{1C23F5FF-8ED3-43D2-91ED-169F82A24E89}'.]LOG]!><time="17:11:39.139-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5332" file="ctmjob.cpp:151">
    <![LOG[Persisted locations for CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89}:
     (LOCAL) <a href="http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="17:11:39.452-120">http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1]LOG]!><time="17:11:39.452-120" date="07-23-2012"
    component="ContentTransferManager" context="" type="1" thread="5392" file="ctmjob.cpp:1894">
    <![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} (corresponding DTS job {D22196C4-A803-42F4-B4FD-6F5FA777A778}) started download from 'http://xxx.com/SMS_DP_SMSPKG$/Content_1173b7a8-9bbf-42cc-8b0f-abd1c3f3065c.1' for full content download.]LOG]!><time="17:11:39.514-120"
    date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5392" file="ctmjob.cpp:413">
    <![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} entered phase CCM_DOWNLOADSTATUS_DOWNLOADING_DATA]LOG]!><time="17:11:39.577-120" date="07-23-2012" component="ContentTransferManager" context="" type="1" thread="5188" file="ctmjob.cpp:1432">
    <![LOG[CTM job {1C23F5FF-8ED3-43D2-91ED-169F82A24E89} encountered error 0x80070005 during download ('Error processing manifest.')- The error maps to denied access.]LOG]!><time="17:11:40.217-120" date="07-23-2012" component="ContentTransferManager"
    context="" type="3" thread="5400" file="ctmjob.cpp:2489">

  • How can I use a variable for an interface log and error fle

    I want to use a variable for the interface's log and error file so that when I migrate from Dev to QA to Prod I don't have to do a lot of editing.
    Specifically on the "flow" tab for the "target", I want a variable to be the first part of the path for the log (\\sundev1\fnd1-hypd1) and join this with the rest (\update\log\logfile.log) within the LOG_FILE_NAME field.
    Thank you!

    Hi,
    It is quite simple....
    just use the <%=odiRef.getSchemaName("D")%> before the file name and configure both path in the topology linked to each context.

  • [svn:osmf:] 14488: PARB changes: Mark some APIs as @private ( logging and error codes).

    Revision: 14488
    Revision: 14488
    Author:   [email protected]
    Date:     2010-03-01 15:25:19 -0800 (Mon, 01 Mar 2010)
    Log Message:
    PARB changes: Mark some APIs as @private (logging and error codes).  They're not critical to expose right now, we'll review them, lock them down, and expose them publicly in time for 1.0.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/events/MediaErrorCodes.as
        osmf/trunk/framework/OSMF/org/osmf/logging/ILogger.as
        osmf/trunk/framework/OSMF/org/osmf/logging/ILoggerFactory.as
        osmf/trunk/framework/OSMF/org/osmf/logging/Log.as
        osmf/trunk/framework/OSMF/org/osmf/logging/TraceLogger.as
        osmf/trunk/framework/OSMF/org/osmf/logging/TraceLoggerFactory.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • No service messages and error sending SMS

    I just started getting No Service messages on my iPhone and an Error sending message trying to send an Sms MSG. What's going on?

    Most likely due to poor signal strength. If the iPhone does not have sufficient signal from the telco, SMS' will return error warnings.
    From what these iPhone threads contain, it seems like O2 in UK, may need to look into improving their infrastructure. There appear to be many complaints concerning signal coverage.

  • Changing fax number of a failed fax in SOST and re-send

    Hi  all,
    The issue is that if a program is firing a fax with a wrong fax number ... the message is recorded as an error in the SOST/B transaction(s).
    Now is there any way I can change the fax number of the message in SOST and then re-send it.
    Because when I click on re-send it does not give me any options to change any of the message attributes and directly fires the fax.
    Please advise.
    Regards,
    Adi

    All the loops (with VERY few exceptions) in Garage Band are in the same key, the key of C.
    That's not true! You might get the impression because the standard key of a new GB project is C, so in the preview all loops play in C (unless they have been labeled incorrectly.)
    If I remember correctly, the original key was listed in the Loop Browser in previous versions of GB, I can't find it in the current one. But if you listen to a loop in the Finder, you can hear its original version.
    This gets important when you have to decide whether to raise or lower a loop. Let's say the loop was recorded in G, you put it in your C major song, and you want it to sound in F. Then you might be tempted to raise it by 5 semitones, because that seems "closer" than lowering it by 7. However, since the original was probably already raised by 5 steps to sound in C, that will result in an overall shift by 10 semitones - probably it sounds weird that way, whereas lowering it by 2 semitones would sound fairly natural.
    Of course you can also just trust your ears, but I find that additional information helpful.

  • Crackling Call Signal and Error Sending Messages!

    Only about a two weeks ago my Iphone has started to have a really bad signal when talking to people from my apartment. I cannot ring out and when people ring me the signal is a nightmare! It even cuts off but the annoying thing is, is that the signal strength and 3g is FULL!!!! My messages usually say sending error failure and i have to turn off the phone off and on to send! I have tried resetting the network settings and resetting the entire phone but nothing!
    Why is this happening???

    It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

  • I got and error message that looks like code what is it and how do i fix it

    when to a screen for srv diag boot it displays menu: manuel test and previous: auto test
    srv sept 09 2006

    so it looks like this screen is a Diagnostic Test. if you press the left/back button it starts running tests and you can go through and participate in them like checking your buttons, scroll wheel, headphones, etc. I guess sometimes hackers will use it just to see what the ipod is made of?
    I am going through the test right now but here are some other options that might help you get out of yours.
    http://answers.yahoo.com/question/index?qid=20061208143405AAtJX8P
    (don't forget to look @ the asker's rating and reply)
    Here is a little more on the Dioag test and maybe how we both got into this mess....
    http://www.tech-recipes.com/rx/2279/putipod_into_diagnosticsmode/
    hope you regain normalcy with your ipod, good luck!

  • No https or gold lock, and error "you have requested and unencrypted page that contains some unencrypted informateion. Information that you see or enter on this page could easily be read by a third party

    Just want the security to appear back in application

    That message means that a page that is opened via a secure https protocol link has elements that come via an insecure http connection.<br />
    That is a problem with that website and not with Firefox.
    Previous Firefox version used to have settings in Tools > Options > Security : Warning Messages to enable or disable such warning messages easily.
    [] "I'm about to view an encrypted page that contains some unencrypted information"
    Firefox 5 doesn't have that warning section anymore and if necessary you need to change the corresponding pref(s) directly on the <b>about:config</b> page.<br />
    You can open about: pages via the location bar like you open a website.

  • Error sending soap request

    Hello!
    I created a simple web service (jax-ws) using NetBeans 5.5 and deployed the web service to the Sun Application Server 9. The integrated function of NetBeans for testing web services works fine. I can also access the wsdl through the internet browser. But a soap request using Altova XMLSpy 2007 fails. The error message states: cannot find dispatch method. But I did exactly the same steps on another machine where the soap request works.
    Any ideas?

    Partially solved. For unknown reasons the soap request is not generated correctly on this machine when using XmlSpy. I just copied the soap request generated by the NetBeans web service test function to XmlSpy and sent it to the server. Works fine.

  • SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")    Exception of class CX_AI_SYSTEM_FAULT

    Hi All,
            while Running Client Proxies from se80 im getting Following error. i already checked all the Services All are active only. can any one suggest me:
    SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")
    Exception of class CX_AI_SYSTEM_FAULT
    RFC Trace:
    **** Trace file opened at 20140630 124650 IST, by disp+work               
        **** Versions SAP-REL 721,0,201 RFC-VER U 3 1460390 MT-SL                 
        XRFC> Begin of user trace                                                 
        XRFC>
        XRFC>                                                                
    <
        XRFC> TRACE SOAP RUNTIME - header                                    
    <
        XRFC>                                                                
    <
        XRFC>
        XRFC> SESSION_ID : 0002425553A5ECFC63B114C4E1000000C0A80141      
        XRFC> TS_CALL
    : 20140630071647.5930180                            
    <
        XRFC> SY_UNAME   : SAPADMIN                                          
    <
        XRFC> HOSTNAME   : SOLAR-DEV                                         
    <
        XRFC> SY_SID
    : DEV                                               
    <
        XRFC> SY_MANDT   : 001                                               
    <
        XRFC> SYS_NR
    : 01                                                
    <
        XRFC> APPLSERVER : SOLAR-DEV_DEV_01                                  
    <
        XRFC> ISPRESCHED : X                                                 
    <
        XRFC> PARENT_ID  : ROOT_CALL_ID                                      
    <
        XRFC> REQ_SIZE   : 1821                                              
    <
        XRFC> RESP_SIZE  : 75                                                
    <
        XRFC> DURATION   : 2246                                              
    <
        XRFC> NETHDRTIME : 2246                                              
    <
    XRFC> CALL_STATE : 2                                                 
    <
    XRFC> ERRORTYPE  : SYSFAIL                                           
    <
    XRFC> ERRORAREA  : COREMSG                                           
    <
    XRFC> CTXDP_TYPE : SOAP_RUNTIME                                      
    <
    XRFC> SYNC_ASYNC : S                                                 
    <
    XRFC> LOCATION   : C                                                 
    <
    XRFC> DIRECTION  : O                                                 
    <
    XRFC> REQ_ID
    : 52EDA553B163C414E1000000C0A80141                  
    <
    XRFC> RESP_ID
    : 00000000000000000000000000000000                  
    <
    XRFC> MSG_STATE  : 114                                               
    <
    XRFC> IF_NAME_I  : YSCO_SAPORDERS_SOAP                               
    <
    XRFC> IF_NS_E
    <
    XRFC> IF_NAME_E  :                                                   
    <
    XRFC> ISSHORTCUT :                                                   
    <
    XRFC> TRC_PATT   : WSTEST                                            
    <
    XRFC> TRC_KEY
    : 50EDA553B163C414E1000000C0A80141                  
    <
    XRFC> TRC_SSID   : DEV_01                                            
    <
    XRFC> TRC_USER   : SAPADMIN                                          
    <
    XRFC> TRC_TS
    : 20140630071647                                    
    <
    XRFC> TRC_COUNT  : 98                                                
    <
    XRFC> TRC_EXT
    <
    XRFC> COMPLETE   : OK                                                
    <
    XRFC> CALLEDPROG : YSCO_SAPORDERS_SOAP                               
    <
    XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:client       
    <
    XRFC> CONF_ID
    <
    XRFC> BIND_ID
    <
    XRFC> OP_NAME
    : InsertPPOrders_Development                        
    <
    XRFC> COMM_PATRN : Method:InsertPPOrders_Development                 
    <
    XRFC> OP_NS 
    : http://microsoft.com/webservices/                 
    <
    XRFC> REMADDRESS :                                                   
    <
    XRFC> LP_NAME
    : YSLP1                                             
    <
    XRFC> DT_OBJ
    : YSCO_SAPORDERS_SOAP                               
    <
    XRFC> MEMCONSUMP : 198                                               
    <
    XRFC> BONAME
    <
    XRFC> PROCCOMP   :                                                   
    <
    XRFC> DEPLOYUNIT :                                                   
    <
    XRFC>       <
    XRFC>                                                                
    <
    XRFC> TRACE SOAP RUNTIME - trace records                             
    <
    XRFC>                                                                
    <
    XRFC>       <
    XRFC> E SOAP_RUNTIME 20140630071649.8380110 : CL_SOAP_RUNTIME_CLIENT 
    <
    XRFC> ->EXECUTE_PROCESSING Exception handling in SOAP runtime        
    <
    XRFC>                                                                
    <
    XRFC>                                                                
    <
    XRFC> E SOAP_APPLICATION 20140630071649.8382410 : CL_SOAP_APPLICATION
    <
        XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING Exception  
    <
        XRFC> handling in SOAP runtime                                       
    <
        XRFC>                                                                
    <
        XRFC>                                                                
    <
        XRFC> E HTTP_TRANSPORT_BINDING 20140630071649.8368980 : CL_SOAP_HTTP 
    <
        XRFC> _TPBND_ROOT ->HANDLE_STATUS_CODE Received return code 500 (    
    <
        XRFC> Internal Server Error )                                        
    <
        XRFC>                                                                
    <
        XRFC>                                                                
    <
        XRFC> E SOAP_RUNTIME 20140630071649.8379970 : CL_SOAP_RUNTIME_CLIENT 
    <
        XRFC> ->EXECUTE_PROCESSING A SOAP Runtime Core Exception occurred in 
    <
        XRFC> method get_http_headers of class CL_SOAP_HTTP_TPBND_ROOT at    
    <
        XRFC> position id 3 with internal error id 1026 and error text SRT:  
    <
        XRFC> HTTP-Code 500: ("Internal Server Error") (fault location is 1 ).
    <
        XRFC>                                                                
    <
        XRFC>                                                                
    <
        XRFC> E SOAP_APPLICATION 20140630071649.8382290 : CL_SOAP_APPLICATION
    <
        XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING A SOAP Runtime  <
        XRFC> Core Exception occurred in method get_http_headers of class    
    <
        XRFC> CL_SOAP_HTTP_TPBND_ROOT at position id 3 with internal error id
    <
        XRFC> 1026 and error text SRT: HTTP-Code 500: ("Internal Server Error")   <
        XRFC> (fault location is 1 ).                                        
    <
        XRFC>                                                                
    <
    Find The Attachment for error:

    Hi Brahmaji,
    i also faced with the above problem, activete the srt services in SICF Transaction.
    Regards,
    Kumar.
    Edited by: kmikkili on Nov 18, 2009 11:39 PM

  • Where is HTTP access and error log when using Embedded PL/SQL Gateway?

    Hello,
    I am using Embedded PL/SQL Gateway to run stored procedures.
    I can't find access log and error log (something like Oracle HTTP Server has).
    In listener.log are only simple data and there are no usernames and procedure names...
    Thanks.
    Marian

    You might be better off asking this on the Apex forum: Oracle Application Express (APEX)

  • Error is not getting logged in error file while running dataload maxl

    Hello All,
    I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
    ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
    I am using the Maxl -
    import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
    Any inputs please...
    Thanks

    Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
    on error append to 'D:\Hyperion\logfiles\myload.err';
    cheers, chris

  • Remote Desktop Services Properties - Operation failed: Access is denied

    Hi
    when i try to change the Remote Desktop Services User Profile Path with ADUC i get the error "Operation failed: Access is denied"
    This error occurs in a subdomain with the Domain Admin of the Subdomain. I'm able to change this attribute with the Enterprise Admin.
    As far as I understand this attribute is set in the userParameters but I don't know what permissions must be set to allow the Domain Admin to change this Attribute and why the Enterprise Admin is allowed to change the Attribute and the subdomain Admin not.
    Our AD Schema is 2003.

    Hi,
    As per I know, this is by design because enterprise admin has full control in every domain within the forest but sub domain admin only has full control in its own domain. SO when subdomain admin try to modify they receive error instead of enterprise admin.
    But still if you want to assign the permission to subdomain user to change then you can delegate below permission to user.
    Read msTSProfilePath
    Write msTSProfilePath
    Snap:
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Saving a document in Lion and iPages

    I just started usibg Lion and I went to save a document I was working on in iPages '09, version 4.1 and discovered there was no "save as" in the file menu. How do I save this dcument?

  • 'access denied' when opening from Office

    Hello, I've experienced this 'access denied' message too. Now I realized that when opening AdobeReader manually all works fine. But when Reader is closed and is opened by Office after saving as PDF file - it still shows this error message. There's no

  • [request] Intel VTune Performance Analyser

    Hello, I am wondering if someone have made a pkgbuild for the Intel VTune Performance Analyser: http://www.intel.com/cd/software/produc - 239143.htm. At the moment I do not have the skills or time to make a PKGBUILD, so I am hoping that someone alrea

  • Transfering files from powerPC G3 running OS9 to macbook pro

    Is it possible to transfer files from my old G3, which runs OS9, to my new Macbook Pro running 10.4.9?

  • Cant save in SQL SERVER.

    Hi all. i have a BMP that save data in a SQL Server Table from a XML document. the BMP finish perfect but  when i check in SQL there no any data. I am using the next estructure: <?xml version="1.0" encoding="UTF-8"?> <sp_jdbc_MT>    <dbTableName acti