Heat/Performance problem

Hi all,
I've been using my Macbook 2ghz Stock with 512mb ram for a couple of days now and everything seemed to work fine and dandy. Since yesterday however I noticed OSX slowing to a crawl after an hour of working. I downloaded CoreDuoTemp to see if it had anything to do with temp. I discovered that the minute my CPU reaches 71 degree celsius it seems to be hitting a brick wall. The smoothness just stops at that very moment. Expose lags, Dashboard is slow like **** and programs take ages to load (if at all). Rebooting didn't do squat.
After letting the machine cool for a while, everything is speedy again. I launched Chess and dragged a pawn a minute or so around to put the machine under some stress. bang At 71 degrees it slows down again.
Anyone experiencing similiar problems? Is it just a faulty setting or do you guys think my Macbook is defective? I'd hate to exchange it, because the thing is **** near perfect.
It's a week 27 model by the way.
Macbook 2Ghz Stock Model   Mac OS X (10.4.7)  

I just got a macbook a few weeks back. I got the $1299 one, and then throw in 2 1-gig sticks of ram. Other than that, it's stock.
I had noticed that at various times my system seems to lag. So typically what happens is I run iTunes to import/play music or run iPhoto to import photos or use iWeb to publish some website photos, and after a while the system gets so lagged it's horrible.
If i minimize to the dock it takes like 5 seconds, and same to remaximize it. I thought that I thought it was perhaps bad ram, and was about to put it through some tests. However, it's such a pain in the butt to open that little compartment with the silver stuffing on it that i decided to hold off.
So today I was lagging while listening to music and surfing the web, and i came here and searched for LAG and VIDEO and various other stuff and saw this topic as a popular one. So after reading it, i got CoreDuoTemp. I noticed my temp was 70-72 degrees. I decided to turn the pc off, let it cool down a lot, and reboot.
I did that, turned on itunes and started to play music, turned on iweb and uploaded 10 megs of photos on 1 page, also surfed various websites, opened up mail and some other stuff. basically turning all the lights on. And looked at the temp, 38-40 degrees, everything running fast, no lag, no minimize lag, perfect.
I am currently letting the pc heat up, it's at 48 degrees. still no lag. i randomly run junk and do things and see if there's a change. I just loadeed Excel, while having itunes, iweb, iphoto and some safari up, and temp jumped from 48 to 54 degrees.
I am going to watch this over the next hour or so and see what happens. i'll post findings here.. but i am now thinking the internal temp overwhelms the onboard video and causes the lag. THe video card lacks, horribly, anyway.
matt
macbook   Mac OS X (10.4.7)  

Similar Messages

  • Yosemite Performance Problem

    Hello,
    I have a Macbrook Pro Retina (late 2013) running Yosemite (I updated using the Appstore) with a lot of performance problems :
    I can't write a text without frame drops
    Showing the notification center takes a long time than usual
    Opening finder is a hard task to do, it keeps showing parts of the window
    I have a problem with the heat of the Macbook Pro, it doesn't go below 50° even if I'm not running anything at all while the ram the used at 80% all the time.
    I can't open mail and chrome at the same time, it makes the macbook completely useless
    ... I can't do what I'm supposed to do using this Macbook Pro anymore...
    Do you think that everyone is having the same problem ? is there any solution to downgrade to Mavericks ? I hate unfinished software, I feel like I'm using A copy of Android or Windows on a Mac,
    Regards,
    Reda,

    You have a botched installation probably due to a defective Mavericks installation that you updated. Since downgrading to Mavericks requires that you erase your hard drive, what you might try is to reinstall Yosemite using the Recovery HD:
    Install or Reinstall Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • PL/SQL Performance problem

    I am facing a performance problem with my current application (PL/SQL packaged procedure)
    My application takes data from 4 temporary tables, does a lot of validation and
    puts them into permanent tables.(updates if present else inserts)
    One of the temporary tables is parent table and can have 0 or more rows in
    the other tables.
    I have analyzed all my tables and indexes and checked all my SQLs
    They all seem to be using the indexes correctly.
    There are 1.6 million records combined in all 4 tables.
    I am using Oracle 8i.
    How do I determine what is causing the problem and which part is taking time.
    Please help.
    The skeleton of the code which we have written looks like this
    MAIN LOOP ( 255308 records)-- Parent temporary table
    -----lots of validation-----
    update permanent_table1
    if sql%rowcount = 0 then
    insert into permanent_table1
    Loop2 (0-5 records)-- child temporary table1
    -----lots of validation-----
    update permanent_table2
    if sql%rowcount = 0 then
    insert into permanent_table2
    end loop2
    Loop3 (0-5 records)-- child temporary table2
    -----lots of validation-----
    update permanent_table3
    if sql%rowcount = 0 then
    insert into permanent_table3
    end loop3
    Loop4 (0-5 records)-- child temporary table3
    -----lots of validation-----
    update permanent_table4
    if sql%rowcount = 0 then
    insert into permanent_table4
    end loop4
    -- COMMIT after every 3000 records
    END MAIN LOOP
    Thanks
    Ashwin N.

    Do this intead of ditching the PL/SQL.
    DECLARE
    TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
    TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
    pnums NumTab;
    pnames NameTab;
    t1 NUMBER(5);
    t2 NUMBER(5);
    t3 NUMBER(5);
    BEGIN
    FOR j IN 1..5000 LOOP -- load index-by tables
    pnums(j) := j;
    pnames(j) := 'Part No. ' || TO_CHAR(j);
    END LOOP;
    t1 := dbms_utility.get_time;
    FOR i IN 1..5000 LOOP -- use FOR loop
    INSERT INTO parts VALUES (pnums(i), pnames(i));
    END LOOP;
    t2 := dbms_utility.get_time;
    FORALL i IN 1..5000 -- use FORALL statement
    INSERT INTO parts VALUES (pnums(i), pnames(i));
    get_time(t3);
    dbms_output.put_line('Execution Time (secs)');
    dbms_output.put_line('---------------------');
    dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
    dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
    END;
    Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723

  • Performance problem in Zstick report...

    Hi Experts,
    I am facing performance problem in Custoom Stock report of Material Management.
    In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
    This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
    To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
    Is there any way out to increase the performance of this report, the output of the report is in ALV.
    May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
    Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
    Thanks
    Rohit Gharwar

    Hello,
    SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
    Yours Sincerely
    Dileep

  • SQL report performance problem

    I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
    The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
    The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
    The summary:
    In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695                                                                            
    In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551                                                        
    What could be the cause of this?
    I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.

    Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
    Only the explain plan doesn't show anything.
    To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
    So, Apex does do something different in the application compared to SQL Workshop.
    Edited by: InoL on Aug 5, 2011 4:50 PM

  • Performance problem with WPF Viewer CRVS2010

    Hi,
    We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
    The testmachine setup:
    HP DL 580 G5
    WMWare ESXi 4.0
    Guest OS: Windows 7 Enterprise 64-bit
    Memory (guest OS): 3GB
    CPU: 1
    Visual Studio 2010
    Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
    Visual Studio 2008 installed
    Microsoft Office 2010 installed
    Macafee antivirus
    There are about 10 other virtual machines on the same HW.
    I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
    The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
    And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
    I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
    So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
    I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
    Here is the VB.Net code Im using to View the reports:
    Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
            Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
            ' Initialize Viewer
            Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
            viewer.Owner = Me
            viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
            viewer.Show()
        End Sub
        Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
            Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
            ' Initialize Viewer
            Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
            viewer.Owner = Me
            viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
            viewer.Show()
        End Sub
    The reports are 2 empty default reports with only 1 textobject on the details section.
    // Thomas

    See if the KB [
    [1448013  - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
    Also the following may not hurt to have a look at (if only for ideas):
    [1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
    [1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
    [1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • JRC 2: Performance Problem

    Hi.
    Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
    First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
    Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
    This methods requires more time with JRC 2 comparing to JRC 1:
    ReportClientDocument#open(String, int);
    SubreportController#setTableLocation(String, ITable, ITable)
    DatabaseController#setTableLocation(ITable, ITable)
    Each invocation of one of these methods requires 2-4 seconds.
    Thank you in advance.
    Best regards
    Thomas
    (1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrc

    hello ....
    my report is  ''crystal report 11'' => "OLE DB"  => "Add Command(select * from table) " .
    code(JRC) : eclipse + crystal report for eclipse version 2 =>  "cr4e-all-in-one-win_2.0.1.zip"
    <%@ page contentType="text/html; charset=UTF-8"
    import="
    com.crystaldecisions.report.web.viewer.CrystalReportViewer,
    com.crystaldecisions.reports.sdk.ReportClientDocument,
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
    java.sql.Connection,
    java.sql.DriverManager,
    java.sql.ResultSet,
    java.sql.SQLException,
    java.sql.Statement" %>
    <%
         try {
              String reportName = "report.rpt";
              ReportClientDocument clientDoc = new ReportClientDocument();
              clientDoc.open(reportName, 0);
              String tableAlias = "Command";
              clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
              CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
              crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
              crystalReportPageViewer.processHttpRequest(request, response, application, null);
         } catch (ReportSDKExceptionBase e) {
              e.printStackTrace();
             out.println(e);
    %>
    I simplified the code, *myResult("SELECT * FROM table") *  is absolutely no problem ,
    and this code is absolutely no problem in the "crystal report for eclipse "version 1
    but in  version 2 run error:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
         at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
         at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
         at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
         at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
         at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
         at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
         at com.crystaldecisions.reports.common.Document.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
         at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
         at com.crystaldecisions.reports.common.Document.a(Unknown Source)
         at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
         at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
         at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
         ... 39 more
    Please help me and tell me why....

  • Performance problem with S873,S691,S679,S716

    Hi All,
    I am using tables S873,S691,S679,S716 in my report. Since these have huge data its creating performance problem. Right now i am selecting data from tables as Select single.. in Loop.. endloop.
    If i try to get it out and use FOR ALL ENTRIES, its taking longer time.
    I dont have all keys with me and i m trying to use index whereever possible.
    Any hints, comments are really appreciable.
    My code goes like this.
    This is not a full code... only a part where i am fetching data from 'S' tables.
    loop at i_mvke.
    SELECT kunnr zzobklgq zzcbklgq
    FROM s679 INTO
    (s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
    matnr EQ i_mvke-matnr AND
    vrsio EQ p_versn AND
    sptag IN s_billed AND
    werks EQ p_werks AND
    vkorg EQ i_mvke-vkorg AND
    kunnr IN s_kunnr.
    SELECT SUM( zznslqty ) FROM s691 INTO
    w_s691_net_bill_qty WHERE
    Use index Z5
    matnr EQ i_mvke-matnr AND
    spmon EQ w_spmon AND
    vrsio EQ p_versn AND
    werks EQ p_werks AND
    vkorg EQ i_mvke-vkorg AND
    kunnr IN s_kunnr."
    SELECT SUM( zznslqty ) SUM( zzninvnum ) FROM s873 INTO
    (work01-zznslqty, work01-zzninvnum) WHERE
    use index Z02
    vkorg EQ i_mvke-vkorg AND
    werks EQ p_werks AND
    matnr EQ i_mvke-matnr AND
    sptag IN s_billed AND
    vrsio EQ p_versn AND
    kunnr IN s_kunnr.
    SELECT zcrdotov FROM s716 INTO s716-zcrdotov WHERE
    matnr EQ i_mvke-matnr AND
    sptag IN s_billed AND
    vkorg EQ i_mvke-vkorg AND
    kunnr IN s_kunnr AND
    werks = p_werks AND
    vrsio EQ p_versn.
    GET THE RECORD TOTAL
    ADD 1 TO w_s716_total_count.
    GET THE ONTIME TOTAL
    IF s716-zcrdotov = 1.
    ADD 1 TO w_s716_ontime_count.
    ENDIF.
    ENDSELECT.
    PERFORM fill_output_table.
    endloop. "i_mvke
    Message was edited by: Agasti Kale

    hi
    good
    wrong->
    SELECT kunnr zzobklgq zzcbklgq
    FROM s679 INTO
    (s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
    matnr EQ i_mvke-matnr AND
    vrsio EQ p_versn AND
    sptag IN s_billed AND
    werks EQ p_werks AND
    vkorg EQ i_mvke-vkorg AND
    kunnr IN s_kunnr.
    write->
    SELECT kunnr zzobklgq zzcbklgq
    FROM s679 INTO CORRESPONDING FIELDS OF TABLE I_MVKE
    WHERE
    matnr EQ i_mvke-matnr AND
    vrsio EQ p_versn AND
    sptag IN s_billed AND
    werks EQ p_werks AND
    vkorg EQ i_mvke-vkorg AND
    kunnr IN s_kunnr.
    do the changes accordingly in the below select statements. you have not post the detail report otherwise i could have help you in other select statements also.
    thanks
    mrutyun

  • Performance problem in ABAP code

    hai guys,
    I created report using tables like bsis,t001 etc,( tax report).
    I have performance problem in this report.
    COuld you pls tell me how to analyse the report and find out the place where process is taking more memory etc.
    i did abap trace and runtime analysis..but could not find out exact point.
    how to do this..
    i want to analysis each subroutine,internal table and query process.
    could you pls give me some ideas.
    ambichan

    There is an excellent tool available in SAP - <b>Code Inspector.
    </b>
    Transaction is SCII
    Try the following link and I am sure you will find a bunch of useful documents.
    <a href="http://www.google.co.in/search?hl=en&safe=off&q=site%3Asdn.sap.comfiletype%3ApdfCode+Inspector&btnG=Search&meta=">ABAP Performance</a>
    I use the Code Inspector to search for
    a) All the select statements which are present within the loop
    b) Nested Loops
    c) Select query without providing criteria for primary keys, depending upon situation
    d) Can the search be narrowed with extra conditions
    e) Using READ .. BINARY SEARCH if internal table has lots of records.
    The list is actually endless, but this is something to start with.
    You can actually have a checklist, and depending upon it, go through your code. The more you adhere to checklist, you will find that, the performance would dramatically improve.
    Also use <b>ST05</b> transaction, for SQL Trace and find out which select query is taking the maximum time for response.
    Regards,
    Subramanian V.

  • Report program Performance problem

    Hi All,
       one object is taking 30hr for executing.some one develped this in 1998 but this time it is a big Performance problem.please some one helep what to do i am giving that code.
    *--DOCUMENTATION--
    Programe written by :  31.03.1998 .
    Purpose : this programe updates the car status into the table zsdtab1
    This programe is to be schedule in the backgroud periodically .
    Querries can be fired on the table zsdtab1 to get the details of the
        Car .
    This programe looks at the changes made in the material master from
    last updated date and the new entries in material master and updates
    the tables zsdtab1 .
    Changes in the Sales Order are not taken into account .
    To get a fresh data set the value of zupddate in table ZSTATUS as
    01.01.1998 . All the data will be refreshed from that date .
    Program Changed on 23/7/2001 after version upgrade 46b by jyoti
    Addition of New tables for Ibase
    tables used -
    tables : mara ,                        " Material master
             ausp ,                        " Characteristics table .
             zstatus ,                     " Last updated status table .
             zsdtab1 ,    " Central database table to be maintained .
             vbap ,                        " Sales order header table .
             vbak ,                        " Sales order item table .
             kna1 ,                        " Customer master .
             vbrk ,
             vbrp ,
             bkpf ,
             bseg ,
             mseg ,
             mkpf ,
             vbpa ,
             vbfa ,
             t005t .                         " Country details tabe .
    --NEW TABLES ADDEDFOR VERSION 4.6B--
    tables :   ibsymbol ,ibin , ibinvalues .
    data : vatinn like ibsymbol-atinn , vatwrt like ibsymbol-atwrt ,
           vatflv like ibsymbol-atflv .
    *--types definition--
    types : begin of mara_itab_type ,
               matnr like mara-matnr ,
               cuobf like mara-cuobf ,
            end of mara_itab_type ,
            begin of ausp_itab_type ,
               atinn like ausp-atinn ,
               atwrt like ausp-atwrt ,
               atflv like ausp-atflv ,
            end of ausp_itab_type .
    data : mara_itab type mara_itab_type occurs 500 with header line ,
           zsdtab1_itab like zsdtab1 occurs 500 with header line ,
           ausp_itab type ausp_itab_type occurs 500 with header line ,
           last_date type d ,
           date type d .
    data: length type i.
    clear mara_itab . refresh mara_itab .
    clear zsdtab1_itab . refresh zsdtab1_itab .
    select single  zupddate into last_date from zstatus
           where programm = 'ZSDDET01' .
    select matnr cuobf into (mara_itab-matnr , mara_itab-cuobf) from mara
          where mtart eq 'FERT' or mtart = 'ZCBU'.
        where MATNR IN MATERIA
         and ERSDA IN C_Date
         and MTART in M_TYP.
        append mara_itab .
    endselect .
    loop at mara_itab.
    clear zsdtab1_itab .
    zsdtab1_itab-commno = mara_itab-matnr .
       Get the detailed data into internal table ausp_itab .----------->>>
    clear ausp_itab . refresh ausp_itab .
    --change starts--
    select atinn atwrt atflv into (ausp_itab-atinn , ausp_itab-atwrt ,
                               ausp_itab-atflv) from ausp
          where objek = mara_itab-matnr .
          append ausp_itab .
       endselect .
       clear ausp_itab .
    select  atinn  atwrt atflv  into (ausp_itab-atinn , ausp_itab-atwrt ,
    ausp_itab-atflv) from ibin as a inner join ibinvalues as b
                      on ain_recno = bin_recno
           inner join  ibsymbol as c
                      on bsymbol_id = csymbol_id
        where a~instance = mara_itab-cuobf  .
      append ausp_itab .
    endselect .
    ----CHANGE ENDS HERE -
    sort ausp_itab by atwrt.
    loop at ausp_itab .
    clear date .
    case ausp_itab-atinn .
      when '0000000094' .
        zsdtab1_itab-model = ausp_itab-atwrt .  " model  .
      when '0000000101' .
        zsdtab1_itab-drive = ausp_itab-atwrt .  " drive
      when '0000000095' .
        zsdtab1_itab-converter = ausp_itab-atwrt . "converter
      when '0000000096' .
        zsdtab1_itab-transmssn = ausp_itab-atwrt . "transmission
      when '0000000097' .
        zsdtab1_itab-colour = ausp_itab-atwrt .    "colour
      when '0000000098' .
        zsdtab1_itab-ztrim = ausp_itab-atwrt .     "trim
      when '0000000103' .
    *=========Sujit 14-Mar-2006
       IF AUSP_ITAB-ATWRT(3) EQ 'WDB' OR AUSP_ITAB-ATWRT(3) EQ 'WDD'
       OR AUSP_ITAB-ATWRT(3) EQ 'WDC' OR AUSP_ITAB-ATWRT(3) EQ 'KPD'.
           ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT+3(14).
       ELSE.
           ZSDTAB1_ITAB-CHASSIS_NO = AUSP_ITAB-ATWRT .     "chassis no
       ENDIF.
        zsdtab1_itab-chassis_no = ausp_itab-atwrt .     "chassis no
    *=========14-Mar-2006
      when '0000000166' .
    ----25.05.04
      length = strlen( ausp_itab-atwrt ).
      if length < 15.                       "***aded by patil
       zsdtab1_itab-engine_no = ausp_itab-atwrt .     "ENGINE NO
      else.
    zsdtab1_itab-engine_no = ausp_itab-atwrt+13(14)."Aded on 21.05.04 patil
      endif.
    ----25.05.04
      when '0000000104' .
        zsdtab1_itab-body_no = ausp_itab-atwrt .     "BODY NO
      when '0000000173' .                                          "21.06.98
        zsdtab1_itab-cockpit = ausp_itab-atwrt .     "COCKPIT NO . "21.06.98
      when '0000000102' .
        zsdtab1_itab-dest = ausp_itab-atwrt .     "destination
      when '0000000105' .
        zsdtab1_itab-airbag = ausp_itab-atwrt .     "AIRBAG
      when '0000000110' .
        zsdtab1_itab-trailer_no = ausp_itab-atwrt .     "TRAILER_NO
      when '0000000109' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-fininspdat = date .   "FIN INSP DATE
      when '0000000108' .
        zsdtab1_itab-entrydate = ausp_itab-atwrt .     "ENTRY DATE
      when '0000000163' .
        zsdtab1_itab-regist_no = ausp_itab-atwrt .     "REGIST_NO
      when '0000000164' .
        zsdtab1_itab-mech_key = ausp_itab-atwrt .     "MECH_KEY
      when '0000000165' .
        zsdtab1_itab-side_ab_rt = ausp_itab-atwrt .     "SIDE_AB_RT
      when '0000000171' .
        zsdtab1_itab-side_ab_lt = ausp_itab-atwrt .     "SIDE_AB_LT
      when '0000000167' .
        zsdtab1_itab-elect_key = ausp_itab-atwrt .     "ELECT_KEY
      when '0000000168' .
        zsdtab1_itab-head_lamp = ausp_itab-atwrt .     "HEAD_LAMP
      when '0000000169' .
        zsdtab1_itab-tail_lamp = ausp_itab-atwrt .     "TAIL_LAMP
      when '0000000170' .
        zsdtab1_itab-vac_pump = ausp_itab-atwrt .     "VAC_PUMP
      when '0000000172' .
        zsdtab1_itab-sd_ab_sn_l = ausp_itab-atwrt .     "SD_AB_SN_L
      when '0000000174' .
        zsdtab1_itab-sd_ab_sn_r = ausp_itab-atwrt .     "SD_AB_SN_R
      when '0000000175' .
        zsdtab1_itab-asrhydunit = ausp_itab-atwrt .     "ASRHYDUNIT
      when '0000000176' .
        zsdtab1_itab-gearboxno = ausp_itab-atwrt .     "GEARBOXNO
      when '0000000177' .
        zsdtab1_itab-battery = ausp_itab-atwrt .     "BATTERY
      when '0000000178' .
        zsdtab1_itab-tyretype = ausp_itab-atwrt .     "TYRETYPE
      when '0000000179' .
        zsdtab1_itab-tyremake = ausp_itab-atwrt .     "TYREMAKE
      when '0000000180' .
        zsdtab1_itab-tyresize = ausp_itab-atwrt .     "TYRESIZE
      when '0000000181' .
        zsdtab1_itab-rr_axle_no = ausp_itab-atwrt .     "RR_AXLE_NO
      when '0000000183' .
        zsdtab1_itab-ff_axl_nor = ausp_itab-atwrt .     "FF_AXLE_NO_rt
      when '0000000182' .
        zsdtab1_itab-ff_axl_nol = ausp_itab-atwrt .     "FF_AXLE_NO_lt
      when '0000000184' .
        zsdtab1_itab-drivairbag = ausp_itab-atwrt .     "DRIVAIRBAG
      when '0000000185' .
        zsdtab1_itab-st_box_no = ausp_itab-atwrt .     "ST_BOX_NO
      when '0000000186' .
        zsdtab1_itab-transport = ausp_itab-atwrt .     "TRANSPORT
      when '0000000106' .
        zsdtab1_itab-trackstage = ausp_itab-atwrt .  " tracking stage
      when '0000000111' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_1 = date .    " tracking date for 1.
      when '0000000112' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_5 = date .    " tracking date for 5.
      when '0000000113' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_10 = date .   "tracking date for 10
      when '0000000114' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_15 = date .   "tracking date for 15
      when '0000000115' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_20 = date .   " tracking date for 20
      when '0000000116' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_25 = date .   " tracking date for 25
      when '0000000117' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_30 = date .   "tracking date for 30
      when '0000000118' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_35 = date .   "tracking date for 35
      when '0000000119' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_40 = date .   " tracking date for 40
      when '0000000120' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_45 = date .   " tracking date for 45
      when '0000000121' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_50 = date .   "tracking date for 50
      when '0000000122' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_55 = date .   "tracking date for 55
      when '0000000123' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_60 = date .   " tracking date for 60
      when '0000000124' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_65 = date .   " tracking date for 65
      when '0000000125' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_70 = date .   "tracking date for 70
      when '0000000126' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_75 = date .   "tracking date for 75
      when '0000000127' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_78 = date .   " tracking date for 78
      when '0000000203' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_79 = date .   " tracking date for 79
      when '0000000128' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_80 = date .   " tracking date for 80
      when '0000000129' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_85 = date .   "tracking date for 85
      when '0000000130' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_90 = date .   "tracking date for 90
      when '0000000131' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dat_trk_95 = date .   "tracking date for 95
      when '0000000132' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dattrk_100 = date .   " tracking date for100
      when '0000000133' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dattrk_110 = date .   " tracking date for110
      when '0000000134' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dattrk_115 = date .   "tracking date for 115
      when '0000000135' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dattrk_120 = date .   "tracking date for 120
      when '0000000136' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-dattrk_105 = date .   "tracking date for 105
      when '0000000137' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_1 = date .     "plan trk date for 1
      when '0000000138' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_5 = date .     "plan trk date for 5
      when '0000000139' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_10 = date .    "plan trk date for 10
      when '0000000140' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_15 = date .    "plan trk date for 15
      when '0000000141' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_20 = date .    "plan trk date for 20
      when '0000000142' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_25 = date .    "plan trk date for 25
      when '0000000143' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_30 = date .    "plan trk date for 30
      when '0000000144' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_35 = date .    "plan trk date for 35
      when '0000000145' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_40 = date .    "plan trk date for 40
      when '0000000146' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_45 = date .    "plan trk date for 45
      when '0000000147' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_50 = date .    "plan trk date for 50
      when '0000000148' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_55 = date .    "plan trk date for 55
      when '0000000149' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_60 = date .    "plan trk date for 60
      when '0000000150' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_65 = date .    "plan trk date for 65
      when '0000000151' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_70 = date .    "plan trk date for 70
      when '0000000152' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_75 = date .    "plan trk date for 75
      when '0000000153' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_78 = date .    "plan trk date for 78
      when '0000000202' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_79 = date .    "plan trk date for 79
      when '0000000154' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_80 = date .    "plan trk date for 80
      when '0000000155' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_85 = date .    "plan trk date for 85
      when '0000000156' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_90 = date .    "plan trk date for 90
      when '0000000157' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_95 = date .    "plan trk date for 95
      when '0000000158' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_100 = date .   "plan trk date for 100
      when '0000000159' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_105 = date .   "plan trk date for 105
      when '0000000160' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_110 = date .   "plan trk date for 110
      when '0000000161' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_115 = date .   "plan trk date for 115
      when '0000000162' .
        perform date_convert using  ausp_itab-atflv changing date .
        zsdtab1_itab-pdt_tk_120 = date .   "plan trk date for 120
    ********Additional fields / 24.05.98**********************************
      when '0000000099' .
        case ausp_itab-atwrt .
          when '540' .
            zsdtab1_itab-roll_blind = 'X' .
          when '482' .
            zsdtab1_itab-ground_clr = 'X' .
          when '551' .
            zsdtab1_itab-anti_theft = 'X' .
          when '882' .
            zsdtab1_itab-anti_tow = 'X' .
          when '656' .
            zsdtab1_itab-alloy_whel = 'X' .
          when '265' .
            zsdtab1_itab-del_class = 'X' .
          when '280' .
            zsdtab1_itab-str_wheel = 'X' .
          when 'CDC' .
            zsdtab1_itab-cd_changer = 'X' .
          when '205' .
            zsdtab1_itab-manual_eng = 'X' .
          when '273' .
            zsdtab1_itab-conn_handy = 'X' .
          when '343' .
            zsdtab1_itab-aircleaner = 'X' .
          when '481' .
            zsdtab1_itab-metal_sump = 'X' .
          when '533' .
            zsdtab1_itab-speaker = 'X' .
          when '570' .
            zsdtab1_itab-arm_rest = 'X' .
          when '580' .
            zsdtab1_itab-aircond = 'X' .
          when '611' .
            zsdtab1_itab-exit_light = 'X' .
          when '613' .
            zsdtab1_itab-headlamp = 'X' .
          when '877' .
            zsdtab1_itab-readlamp = 'X' .
          when '808' .
            zsdtab1_itab-code_ckd = 'X' .
          when '708' .
            zsdtab1_itab-del_prt_lc = 'X' .
          when '593' .
            zsdtab1_itab-ins_glass = 'X' .
          when '955' .
            zsdtab1_itab-zelcl = 'Elegance' .
          when '593' .
            zsdtab1_itab-zelcl = 'Classic' .
        endcase .
    endcase .
    endloop .
    *--Update the sales data .--
    perform get_sales_order using mara_itab-matnr .
    perform get_cartype using mara_itab-matnr .
    append zsdtab1_itab .
    endloop.
    <<<
    loop at zsdtab1_itab .
      if zsdtab1_itab-cartype <> 'W-203'
      or zsdtab1_itab-cartype <> 'W-210'
      or zsdtab1_itab-cartype <> 'W-211'.
          clear zsdtab1_itab-zelcl.
      endif.
    SELECT SINGLE * FROM ZSDTAB1 WHERE COMMNO = MARA_ITAB-MATNR .
    select single * from zsdtab1 where commno = zsdtab1_itab-commno.
    if sy-subrc <> 0 .
        insert into zsdtab1 values zsdtab1_itab .
    else .
        update zsdtab1 set :vbeln = zsdtab1_itab-vbeln
                       bill_doc = zsdtab1_itab-bill_doc
                       dest = zsdtab1_itab-dest
                       lgort = zsdtab1_itab-lgort
                       ship_tp = zsdtab1_itab-ship_tp
                       country = zsdtab1_itab-country
                       kunnr = zsdtab1_itab-kunnr
                       vkbur = zsdtab1_itab-vkbur
                       customer = zsdtab1_itab-customer
                       city   = zsdtab1_itab-city
                       region = zsdtab1_itab-region
                       model = zsdtab1_itab-model
                       drive = zsdtab1_itab-drive
                       converter = zsdtab1_itab-converter
                       transmssn = zsdtab1_itab-transmssn
                       colour = zsdtab1_itab-colour
                       ztrim = zsdtab1_itab-ztrim
                       commno = zsdtab1_itab-commno
                       trackstage = zsdtab1_itab-trackstage
                       chassis_no    =   zsdtab1_itab-chassis_no
                       engine_no     =   zsdtab1_itab-engine_no
                       body_no       =   zsdtab1_itab-body_no
                       cockpit       =   zsdtab1_itab-cockpit
                       airbag        =   zsdtab1_itab-airbag
                       trailer_no    =   zsdtab1_itab-trailer_no
                       fininspdat    =   zsdtab1_itab-fininspdat
                       entrydate     =   zsdtab1_itab-entrydate
                       regist_no     =   zsdtab1_itab-regist_no
                       mech_key      =   zsdtab1_itab-mech_key
                       side_ab_rt    =   zsdtab1_itab-side_ab_rt
                       side_ab_lt    =   zsdtab1_itab-side_ab_lt
                       elect_key     =   zsdtab1_itab-elect_key
                       head_lamp     =   zsdtab1_itab-head_lamp
                       tail_lamp     =   zsdtab1_itab-tail_lamp
                       vac_pump      =   zsdtab1_itab-vac_pump
                       sd_ab_sn_l    =   zsdtab1_itab-sd_ab_sn_l
                       sd_ab_sn_r    =   zsdtab1_itab-sd_ab_sn_r
                       asrhydunit    =   zsdtab1_itab-asrhydunit
                       gearboxno     =   zsdtab1_itab-gearboxno
                       battery       =   zsdtab1_itab-battery
                       tyretype      =   zsdtab1_itab-tyretype
                       tyremake      =   zsdtab1_itab-tyremake
                       tyresize      =   zsdtab1_itab-tyresize
                       rr_axle_no    =   zsdtab1_itab-rr_axle_no
                       ff_axl_nor    =   zsdtab1_itab-ff_axl_nor
                       ff_axl_nol    =   zsdtab1_itab-ff_axl_nol
                       drivairbag    =   zsdtab1_itab-drivairbag
                       st_box_no     =   zsdtab1_itab-st_box_no
                       transport     =   zsdtab1_itab-transport
    OPTIONS-
                       roll_blind    = zsdtab1_itab-roll_blind
                       ground_clr    = zsdtab1_itab-ground_clr
                       anti_theft    = zsdtab1_itab-anti_theft
                       anti_tow      = zsdtab1_itab-anti_tow
                       alloy_whel    = zsdtab1_itab-alloy_whel
                       del_class     = zsdtab1_itab-del_class
                       str_wheel     = zsdtab1_itab-str_wheel
                       cd_changer    = zsdtab1_itab-cd_changer
                       manual_eng    = zsdtab1_itab-manual_eng
                       conn_handy    = zsdtab1_itab-conn_handy
                       aircleaner    = zsdtab1_itab-aircleaner
                       metal_sump    = zsdtab1_itab-metal_sump
                       speaker       = zsdtab1_itab-speaker
                       arm_rest      = zsdtab1_itab-arm_rest
                       aircond       = zsdtab1_itab-aircond
                       exit_light    = zsdtab1_itab-exit_light
                       headlamp      = zsdtab1_itab-headlamp
                       readlamp      = zsdtab1_itab-readlamp
                       code_ckd      = zsdtab1_itab-code_ckd
                       del_prt_lc    = zsdtab1_itab-del_prt_lc
                       ins_glass     = zsdtab1_itab-ins_glass
                       dat_trk_1 = zsdtab1_itab-dat_trk_1
                       dat_trk_5 = zsdtab1_itab-dat_trk_5
                       dat_trk_10 = zsdtab1_itab-dat_trk_10
                       dat_trk_15 = zsdtab1_itab-dat_trk_15
                       dat_trk_20 = zsdtab1_itab-dat_trk_20
                       dat_trk_25 = zsdtab1_itab-dat_trk_25
                       dat_trk_30 = zsdtab1_itab-dat_trk_30
                       dat_trk_35 = zsdtab1_itab-dat_trk_35
                       dat_trk_40 = zsdtab1_itab-dat_trk_40
                       dat_trk_45 = zsdtab1_itab-dat_trk_45
                       dat_trk_50 = zsdtab1_itab-dat_trk_50
                       dat_trk_55 = zsdtab1_itab-dat_trk_55
                       dat_trk_60 = zsdtab1_itab-dat_trk_60
                       dat_trk_65 = zsdtab1_itab-dat_trk_65
                       dat_trk_70 = zsdtab1_itab-dat_trk_70
                       dat_trk_75 = zsdtab1_itab-dat_trk_75
                       dat_trk_78 = zsdtab1_itab-dat_trk_78
                       dat_trk_79 = zsdtab1_itab-dat_trk_79
                       dat_trk_80 = zsdtab1_itab-dat_trk_80
                       dat_trk_85 = zsdtab1_itab-dat_trk_85
                       dat_trk_90 = zsdtab1_itab-dat_trk_90
                       dat_trk_95 = zsdtab1_itab-dat_trk_95
                       dattrk_100 = zsdtab1_itab-dattrk_100
                       dattrk_105 = zsdtab1_itab-dattrk_105
                       dattrk_110 = zsdtab1_itab-dattrk_110
                       dattrk_115 = zsdtab1_itab-dattrk_115
                       dattrk_120 = zsdtab1_itab-dattrk_120
                       pdt_tk_1 = zsdtab1_itab-pdt_tk_1
                       pdt_tk_5 = zsdtab1_itab-pdt_tk_5
                       pdt_tk_10 = zsdtab1_itab-pdt_tk_10
                       pdt_tk_15 = zsdtab1_itab-pdt_tk_15
                       pdt_tk_20 = zsdtab1_itab-pdt_tk_20
                       pdt_tk_25 = zsdtab1_itab-pdt_tk_25
                       pdt_tk_30 = zsdtab1_itab-pdt_tk_30
                       pdt_tk_35 = zsdtab1_itab-pdt_tk_35
                       pdt_tk_40 = zsdtab1_itab-pdt_tk_40
                       pdt_tk_45 = zsdtab1_itab-pdt_tk_45
                       pdt_tk_50 = zsdtab1_itab-pdt_tk_50
                       pdt_tk_55 = zsdtab1_itab-pdt_tk_55
                       pdt_tk_60 = zsdtab1_itab-pdt_tk_60
                       pdt_tk_65 = zsdtab1_itab-pdt_tk_65
                       pdt_tk_70 = zsdtab1_itab-pdt_tk_70
                       pdt_tk_75 = zsdtab1_itab-pdt_tk_75
                       pdt_tk_78 = zsdtab1_itab-pdt_tk_78
                       pdt_tk_79 = zsdtab1_itab-pdt_tk_79
                       pdt_tk_80 = zsdtab1_itab-pdt_tk_80
                       pdt_tk_85 = zsdtab1_itab-pdt_tk_85
                       pdt_tk_90 = zsdtab1_itab-pdt_tk_90
                       pdt_tk_95 = zsdtab1_itab-pdt_tk_95
                       pdt_tk_100 = zsdtab1_itab-pdt_tk_100
                       pdt_tk_105 = zsdtab1_itab-pdt_tk_105
                       pdt_tk_110 = zsdtab1_itab-pdt_tk_110
                       pdt_tk_115 = zsdtab1_itab-pdt_tk_115
                       pdt_tk_120 = zsdtab1_itab-pdt_tk_120
                       cartype = zsdtab1_itab-cartype
                       zelcl = zsdtab1_itab-zelcl
                       excise_no = zsdtab1_itab-excise_no
    where commno = zsdtab1_itab-commno .
       Update table .---------<<<
    endif .
    endloop .
    perform update_excise_date .
    perform update_post_goods_issue_date .
    perform update_time.
    *///////////////////// end of programe /////////////////////////////////
    Get sales data -
    form get_sales_order using matnr .
      data : corr_vbeln like vbrk-vbeln .
    ADDED BY ADITYA / 22.06.98 **************************************
    perform get_order using matnr .
    select single vbeln lgort into (zsdtab1_itab-vbeln , zsdtab1_itab-lgort)
                from vbap where matnr = matnr .   " C-22.06.98
                  from vbap where vbeln = zsdtab1_itab-vbeln .
      if sy-subrc = 0 .
    ************Get the Excise No from Allocation Field*******************
        select single * from zsdtab1 where commno = matnr .
        if zsdtab1-excise_no =  '' .
          select * from vbrp where matnr = matnr .
            select single vbeln into corr_vbeln from vbrk where
            vbeln = vbrp-vbeln and vbtyp = 'M'.
            if sy-subrc eq 0.
              select single * from vbrk where vbtyp = 'N'
              and sfakn = corr_vbeln.      "cancelled doc.
              if sy-subrc ne 0.
                select single * from vbrk where vbeln = corr_vbeln.
                if sy-subrc eq 0.
                  data : year(4) .
                  move sy-datum+0(4) to year .
      select single * from bkpf where awtyp = 'VBRK' and awkey = vbrk-vbeln
                                      and  bukrs = 'MBIL' and gjahr = year .
                  if sy-subrc = 0 .
      select single * from bseg where bukrs = 'MBIL' and belnr = bkpf-belnr
                                       and gjahr = year and koart = 'D' and
                                                               shkzg = 'S' .
                    zsdtab1_itab-excise_no = bseg-zuonr .
                  endif .
                endif.
              endif.
            endif.
          endselect.
        endif .
        select single kunnr vkbur into (zsdtab1_itab-kunnr ,
                zsdtab1_itab-vkbur) from vbak
                where vbeln = zsdtab1_itab-vbeln .
        if sy-subrc = 0 .
          select single name1 ort01 regio into (zsdtab1_itab-customer ,
             zsdtab1_itab-city , zsdtab1_itab-region) from kna1
             where kunnr = zsdtab1_itab-kunnr .
        endif.
      Get Ship to Party **************************************************
        select single * from vbpa where vbeln = zsdtab1_itab-vbeln and
                        parvw = 'WE' .
        if sy-subrc = 0 .
            zsdtab1_itab-ship_tp = vbpa-kunnr .
      Get Destination Country of Ship to Party .************
            select single * from kna1 where kunnr = vbpa-kunnr .
            if sy-subrc = 0 .
               select single * from t005t where land1 = kna1-land1
                                       and spras = 'E' .
               if sy-subrc = 0 .
                   zsdtab1_itab-country = t005t-landx .
               endif .
            endif .
        endif .
      endif .
    endform.                               " GET_SALES
    form update_time.
      update zstatus set zupddate = sy-datum
                         uzeit = sy-uzeit
      where programm = 'ZSDDET01' .
    endform.                               " UPDATE_TIME
    *&      Form  DATE_CONVERT
    form date_convert using atflv changing date .
      data : dt(8) , dat type i .
      dat = atflv .
      dt = dat .
      date = dt .
    endform.                               " DATE_CONVERT
    *&      Form  UPDATE_POST_GOODS_ISSUE_DATE
    form update_post_goods_issue_date .
      types : begin of itab1_type ,
                mblnr like mseg-mblnr ,
                budat like mkpf-budat ,
              end of itab1_type .
      data : itab1 type itab1_type occurs 10 with header line .
      loop at mara_itab .
        select single * from zsdtab1 where commno = mara_itab-matnr .
        if sy-subrc =  0  and zsdtab1-postdate =  '00000000' .
          refresh itab1 . clear itab1 .
        select * from mseg where matnr = mara_itab-matnr and bwart = '601' .
            itab1-mblnr = mseg-mblnr .
            append itab1 .
          endselect .
          loop at itab1 .
            select single * from mkpf where mblnr = itab1-mblnr .
            if sy-subrc = 0 .
              itab1-budat = mkpf-budat .
              modify itab1 .
            endif .
          endloop .
          sort itab1 by budat .
          read table itab1 index 1 .
          if sy-subrc = 0 .
            update zsdtab1 set postdate = itab1-budat
                         where commno = mara_itab-matnr .
          endif .
        endif .
      endloop .
    endform.                               " UPDATE_POST_GOODS_ISSUE_DATE
    *&      Form  UPDATE_EXCISE_DATE
    form update_excise_date.
      types : begin of itab2_type ,
                mblnr like mseg-mblnr ,
                budat like mkpf-budat ,
              end of itab2_type .
      data : itab2 type itab2_type occurs 10 with header line .
      loop at mara_itab .
        select single * from zsdtab1 where commno = mara_itab-matnr .
        if sy-subrc =  0  and zsdtab1-excise_dat  = '00000000' .
          refresh itab2 . clear itab2 .
          select * from mseg where matnr = mara_itab-matnr and
                                  (  bwart = '601' or  bwart = '311' ) .
            itab2-mblnr = mseg-mblnr .
            append itab2 .
          endselect .
          loop at itab2 .
            select single * from mkpf where mblnr = itab2-mblnr .
            if sy-subrc = 0 .
              itab2-budat = mkpf-budat .
              modify itab2 .
            endif .
          endloop .
          sort itab2 by budat .
          read table itab2 index 1 .
          if sy-subrc = 0 .
            update zsdtab1 set excise_dat = itab2-budat
                         where commno = mara_itab-matnr .
          endif .
        endif .
      endloop .
    endform.                               " UPDATE_EXCISE_DATE
    form get_order using matnr .
    types :  begin of itab_type ,
                vbeln like vbap-vbeln ,
                posnr like vbap-posnr ,
             end of itab_type .
    data : itab type itab_type occurs 10 with header line .
    refresh itab . clear itab .
    select * from vbap where matnr = mara_itab-matnr .
       itab-vbeln = vbap-vbeln .
       itab-posnr = vbap-posnr .
       append itab .
    endselect .
    loop at itab .
      select single * from vbak where vbeln = itab-vbeln .
      if vbak-vbtyp <> 'C' .
        delete itab .
      endif .
    endloop .
    loop at itab .
    select single * from vbfa where vbelv = itab-vbeln and
             posnv = itab-posnr and vbtyp_n = 'H' .
    if sy-subrc = 0 .
      delete itab .
    endif .
    endloop .
    clear :  zsdtab1_itab-vbeln ,  zsdtab1_itab-bill_doc .
    loop at itab .
      zsdtab1_itab-vbeln = itab-vbeln .
      select single * from vbfa where vbelv = itab-vbeln and
             posnv = itab-posnr and vbtyp_n = 'M' .
    if sy-subrc = 0 .
      zsdtab1_itab-bill_doc = vbfa-vbeln .
    endif .
    endloop .
    endform .
    *&      Form  GET_CARTYPE
    form get_cartype using matnr .
    select single * from mara where matnr = matnr .
    zsdtab1_itab-cartype = mara-satnr .
    endform.                    " GET_CARTYPE

    Hi,
    I have analysed your program and i would like to share following points for better performance of this report :
    (a)  Use the field Names instead of Select * or Select Single * as if you use the field names it will consume less amount of resources inside the loop as well as you have lot many Select Single * and u r using very big tables like VBAP and many more.
    (b) Trace on ST05 which particular query is mostly effecting your system or use ST12 in current mode to trace for less inputs which run the report for 20-30 min so that we get an idea which queries are effecting the system and taking a lot of time.
    (c) In Case of internal tables sort the data properly and use binary search for getting the data.
    I think this will help.
    Thanks and Regards,
    Harsh

  • Report painter performance problem...

    I have a client which runs a report group consists of 14 reports... When we  run this program... It takes about 20 minutes to get results... I was assigned to optimize this report...
    This is what I've done so far
    (this is a SAP generated program)...
    1. I've checked the tables that the program are using... (a customized table with more than 20,000 entries and many others)
    2. I've created secondary indexes  to the main customized table with (20,000) entries - It improves the performance a bit(results about 18 minutes)...
    3. I divided the report group by 4... 3 reports each report group... It greatly improves the performance... (but this is not what the client wants)...
    4. I've read an article about report group performance that it is a bug. 
    (sap support recognized the fact that we are dealing with a bug in the sap standard functionality)
    http://it.toolbox.com/blogs/sap-on-db2/sap-report-painter-performance-problem-26000
    Anyone have the same problem as mine?
    Edited by: christopher mancuyas on Sep 8, 2008 9:32 AM
    Edited by: christopher mancuyas on Sep 9, 2008 5:39 AM

    Report painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
    now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
    Amit.

  • Interactive report performance problem over database link - Oracle Gateway

    Hello all;
    This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
    The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
    query like this: (due to sensitivity issue, I can not disclose real table name)
    SELECT apex_item.checkbox(1,b.col3)
    , a.col1
    , a.col2
    FROM table_one a
    , table_two b
    WHERE a.col3 = 12345
    AND a.col4 = 100
    AND b.col5 = a.col5
    table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
    Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
    I would like to get ideas from people how to resolve or speed-up the query?
    Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
    Thank you.
    Shaun S.

    Hi Shaun
    Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
    By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
    Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two),
    sourceqry AS
    (SELECT  b.col3 x
           , a.col1 y
           , a.col2 z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5)
    SELECT apex_item.checkbox(1,x), y , z
    FROM sourceqry
    WITH a AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_one),
    b AS
    (SELECT /*+ MATERIALIZE */ *
    FROM table_two)
    SELECT  apex_item.checkbox(1,x), y , z
    FROM table_one a
        , table_two b
    WHERE a.col3 = 12345
    AND   a.col4 = 100
    AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
    We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
    Sorry for all the questions but it helps to answer the question, if I can.
    Cheers
    Ben
    http://www.munkyben.wordpress.com
    Don't forget to mark replies helpful or correct ;)

  • Performance problems with abap report SAPLPRGN_STRUCTURE during users login

    Hello,
    after patchimport of SAP BASIS level 21 and SAPABAP level 21 our SAP Production System (ECC6-UNICODE KERNEL 240) denote a performance problems. A lot of ours users during logon phase must wait until 10-12 minutes before that the navigation menu is displayed. The problem is generated by the slow performance of the standard SAP REPORT SAPLPRGN_STRUCTURE that require a lot time.  Any idea?
    Thanks

    Hi Pat,
    I would stop SAP and use DLTR3PKG, If this doesn't help, you need to investigate, if it is a CPU or DB-Time issue in ST03. Then you have to handle accordingly ...
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • Performance problems with Leopard 10.5.1

    Hello,
    I use an iMac 24 Alu 2,8Ghz and upgraded to Leopard. There are some major performance problems and bugs in the recent version of Leopard:
    1. While accessing USB devices, the display speed, windows moving, animations etc. slow down
    2. Adobe CS3 Photoshop 10.01 and Flash CS3 are sometimes extremly slow. I tried the recent demo packages from Adobe:
    2.1. The Photoshop dialogue "save for web" slows down the system completly, and this problem stays when quitting Photoshop. A restart is neccessary then.
    2.2. Flash CS3 movie preview is very slow and stuttering. It's so slow you cannot imagine how the real movie flow will be.
    2.3. Recent Flash Player 9,0,115,0 with hardware acceleration enabled doesn't really work with QuartzGL enabled Leopard: The movies slow down a lot. Try www.neave.tv for example.
    3. Safari, Mail and other bundled software hang sometimes. You have to force quit them then. It doesn't matter whether QuartzGL is enabled or not. This especially happens to my system if it is online for some hours.
    4. A lot of Apple applications doesn't seem to work with 2dextreme enabled. Why this? Apple supporters told me in Leopard there will be a much better 2dextreme support. Also Quartz2dExtreme in OSX 10.4 worked with all applications and i guess it's the same feature like "QuartzGL" in Leopard. So Leopard isn't finished here. It would be nice if Apple could make it's own software QuartzGL compatible.
    5. Very often the desktop slows down or lags. This is the main reason I often still witch to Windows XP PC to do work in a faster, less annoying way.
    6. Safari crashes randomly sometimes. It is unstable still. Also it crashes more often if you resize/move the window a lot, so I guess it is a graphics extension-related problem.
    I hope you people from Apple will fix these annoying points and optimize your new system in the next update release.
    Best regards

    Thanks for you answer. I repaired in the way as described above. There were some errors, some file index was wrong (don't remember exactly the phrase), now the DU reports the partition was successfully repaired / the volume appears to be ok.
    The crashes in Safari are gone, but all other described problems still exist. Adobe CS3 is not really usable for me.
    By the way, in iMacSoftwareUpdate 1.3, which was replaced by OSX 10.5.1 update, there is one extension called AppleVADriver.kext that does not exist in the OSX 10.5.1 update. Is it an important extension?

  • Performance Problems - CPU

    Hi all,
    I'm having some performance problems and i have generated an AWR of a day and i have seen this following things:
    Top 5 Timed Events Avg %Total
    ~~~~~~~~~~~~~~~~~~ wait Call
    Event Waits Time (s) (ms) Time Wait Class
    CPU time 50,318 41.7
    db file sequential read 6,688,472 32,711 5 27.1 User I/O
    Backup: sbtwrite2 1,068,309 7,903 7 6.6 Administra
    db file scattered read 1,012,065 6,999 7 5.8 User I/O
    PX Deq Credit: send blkd 231,401 4,989 22 4.1 Other
    Operating System Statistics DB/Inst: CAPDB14P/capdb14p1 Snaps: 15710-15778
    Statistic Total
    AVG_BUSY_TIME 3,221,704
    AVG_IDLE_TIME 4,923,831
    AVG_IOWAIT_TIME 2,302,776
    AVG_SYS_TIME 537,429
    AVG_USER_TIME 2,682,900
    BUSY_TIME 6,446,121
    IDLE_TIME 9,850,381
    IOWAIT_TIME 4,608,322
    SYS_TIME 1,077,598
    USER_TIME 5,368,523
    LOAD 0
    OS_CPU_WAIT_TIME 1,999,898,469,700
    RSRC_MGR_CPU_WAIT_TIME 0
    VM_IN_BYTES 12,201,893,888
    VM_OUT_BYTES 476,655,616
    PHYSICAL_MEMORY_BYTES 8,568,512,512
    NUM_CPUS 2
    NUM_CPU_SOCKETS 2
    ###########################3
    I think that we are having CPU problems here !!
    All my memory caches are good, 99% hit.
    Anybody agree with me???
    Tks,
    Paulo

    I have problems on some queries that have another wait event related to RAC.
    "gc cs multi block request" is taking a lot of time on some queries. These queries run very fast at another databas that isn't a RAC database.
    Example:
    1-Tables has the same number of rows!!!!!
    2-Both tables and indexes are analyzed using the same tool (DBMA_STATS)
    ####RAC DATABASE####
    SELECT 1 from dual
    WHERE NOT EXISTS (SELECT 1
    FROM mensalidade a
    WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
    ----Explain
    SELECT STATEMENT, GOAL = ALL_ROWS               4     1     
    FILTER                         
    FAST DUAL               2     1     
    PX COORDINATOR FORCED SERIAL                         
    PX SEND QC (RANDOM)     SYS     :TQ10000     2     1     7
    PX BLOCK ITERATOR               2     1     7
    INDEX FAST FULL SCAN     BRCAPDB2     IMENSALIDADE1     2     1     7
    ----It takes more than 500 seconds to run
    ####STANDALONE DATABASE####
    SELECT 1 from dual
    WHERE NOT EXISTS (SELECT 1
    FROM mensalidade a
    WHERE data_vencimento >= CHAR_TO_DATE('20070201'));
    ----Explain
    SELECT STATEMENT, GOAL = ALL_ROWS               4     1     
    FILTER                         
    FAST DUAL               2     1     
    PX COORDINATOR FORCED SERIAL                         
    PX SEND QC (RANDOM)     SYS     :TQ10000     2     2     16
    PX BLOCK ITERATOR               2     2     16
    TABLE ACCESS FULL     BRCAPDB2     MENSALIDADE     2     2     16
    ----It takes 0.1 seconds to run

Maybe you are looking for

  • Error reading xls file

      Why the simulation is not accepting the data iam trying to give.  Why Does the "Read Waveform From File.vi" Behave Differently in the Run-time Engine?  what is the solution for this.Can you explain please.Iam also adding the vi file and the excel f

  • PO Reject Notification - How to change notification text

    Hello, We have setup the PO reject notifiation in SRM 7.0 (event APPROVAL_PROCESS_DOC_REJECTED  Sub Category APPROVAL_RESULT_NOTIFIC_NEW). The PO creator is receving the reject notifications. How can the text being sent on the PO reject notification

  • Trouble with my Multicam clip

    I'm trying to synchornize my two camera shots using the multicam button.  All is well in making the clip; however, i notice then when the created multi cam clip is in the timeline it is displaying in a linear fasion with the second camera clips ahead

  • Photoshop cs3 hangs when using  "File open"

    I am running Photoshop CS3 extended on an HP desktop XP( fully updated) computer - 2 GB RAM -running fine util tonight when i tried to do a "file>open" the file menu idsappears in a split second and then it locks. It acts the same when i use the keyb

  • Disabling Fusion Drive and Installing Windows on SSD of Late 2012 iMac

    Hi, everyone.  After a two-year wait, I'm ready to buy my first iMac (was waiting for USB 3.0).  Before I get into my questions, I'll give you an overview of where I'm coming from so we can keep the discussion focused. My Usage I'm buying an Apple co