Heavy performance issues using Adobe Interactive Form PDFs generated by SAP BPM

Dear experts,
we use Adobe Interactive Form PDFs (generated with LiveCycle Designer) as Human Tasks within SAP BPM processes. The PDFs are generated and transmitted correctly, but when they are opened at the receivers PC, Windows freezes for 2-3 minutes, then the PDF opens and can be filled out and sent back. The next PDFs can be opened much faster, but when the PC is restarted, we get the same problem again. We use Adobe Reader XI (11.0.2) on our clients; is their any know performance issue?
Please note, that we have this problem with EVERY Adobe Interactive Form PDF... I created a simple PDF containing just a field and the client PC still freezes. So it can't be in the form or the scripting. Normal static PDFs can be opend without any problems.
Best regards,
David

They haven't really announced it, because there is no product to announce. Rather the opposite.
There are no conversion tools, so far as I know.
XFA forms are a non-starter if you want portability.
AcroForms are a nightmare in themselves, because the functionality is limited in Adobe Reader and varies between absent and weird in other products. No idea about Blackberry support.
You will not find a simple recommendation. Rather, you need to use Acroforms and carefully test everything (EVERYTHING: no assumptions) on every platform you intend to support.
Yes, rather unsatisfactory, but until Adobe realise that the future is platform equivalence or irrelevance, this is where we are.

Similar Messages

Designing Labels using Adobe Interactive Forms

Is anyone out there using Adobe Interactive Forms to design packaging labels? If so, I'd be interested in hearing about your experiences with this. In particular, I'd like to know if you evaluated third-party label design software and did a comparative analysis with Adobe Interactive Forms as well as the results of your analysis (what were the strengths and weaknesses of each).
We are a medical device manufacturing company, so we have to comply with the FDA's 21 CFR Part 820 regulations so ideally I'd like to get some feedback from another FDA-regulated company.

Hi Pedro
in principle, this is the way you need to set up your landscape to work with a 4.7 system.
However: If you read the FAQ here in <a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/interactiveforms">SDN</a> or in the <a href="http://service.sap.com/adobe">SAP Service Marketplace</a>, you'll see that SAP explicit recommends NOT to use this setup for printing scenarios. This is due to possible issues with performance expectations.
You are welcome to use this setup for interactive scenarios.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

Blank page getting displyed whn using adobe interactive forms

Hi All,
I am Facing one problem while using Adobe interactive forms in Web Dynpro.
on deploy interactive form is not getting displayed.
Deployment result shows blank view....
m not getting the cause of the problem.
kindly help if someone knows the cause/solution.
Thanks,
Amit

Hi there,
I am having the same problem. I deployed the same WD with IF on 2 different machines and there everything works fine. I using the same browser (IE6) on all the machines. Where are using Native IF and running Adobe Reader 7.0.8. We are on NW04s SP9.
I tested the ADS Webservice on the machine and that is working fine.....
Hope somebody can tell me where to look.
Thx in advance.
Amit, when you are using IF type "native" the at least run Adobe Reader 7.0.8. Maybe this solves the problem for you.
Kind regards,
Maarten.

Using Adobe Interactive Form - Attach The Static PDF.

Dear Experts,
Is it possible to attach the static pdf along with dynamic pdf, which is been created at run time in using NW 7.0 adobe interactive form(Interactive Form UI Element)., If yes then kindly let me know how can be done ..
Any help will greatly appreciated.
Thanks
AB

Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

Using Adobe Interactive Forms In releaser 470

Dear all.
 I need to know if its possibel to used the Adobe Interactive forms in the following way:
 - My applications System is at 470 Release.
 - Install the SAP Netweaver AS in other System.
 Using this scenario the SAP System 470, transfer information to the SAP Netweaver AS and the Printing (Say created the Forms and Adobe Interactive Forms and created PDF Based Print Forms).
 Is this scenario correct?
Best Regards
Thanks in advanced
PMR

Hi Pedro
in principle, this is the way you need to set up your landscape to work with a 4.7 system.
However: If you read the FAQ here in <a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/interactiveforms">SDN</a> or in the <a href="http://service.sap.com/adobe">SAP Service Marketplace</a>, you'll see that SAP explicit recommends NOT to use this setup for printing scenarios. This is due to possible issues with performance expectations.
You are welcome to use this setup for interactive scenarios.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

Web Service is not triggering using Adobe Interactive Form

Hello Experts,
I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
Problem:--
My requirement is to create an adobe form , in which
-> an input field is needed,and some description is needed.
I used button to trigger my webservice.
Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
My web service is working fine as I have tested from WS NAVIGATOR(Note: http://<source>:<port>/wsnavigator).
In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
All Request and Response parameters are availabe in Data View palletes of Form.
Button that is available from data connection is used.
I have used Button as an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
But above things not worked so ,
I also tried with Regular Button , and under click written Javascript/FormCalc which is:--
var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection2.execute(0);
But this also not worked .
So, I think there can be a little issue may be , I am forgetting to click some special atrributes in form .
Please help me and let me know what can be probable reasons that webservice is not triggering
Thanks a lot ,
Jeet

Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

How to store adobe Interactive form PDF in archive link?

Hi everybody,
I had create a WebDybpro Abap that contain an Adobe Interactive Form, now I must store this Interactive Form into Archive Link like a PDF document.
I succeeded to save the PDF document on the archive link but after this operation, when I open this document saved, it doesn't show me the data but only the Interactive Form structure. The only data that file PDF saves are those I passed to Interactive Form during at the event initialization, but it lose all others datas that I inserted on the Interactive Form before to save.
There is one mode to save also these datas or I can store only data that I load at the initialization event?
I hope in your fast help.
Regards.
Davide.
To follow the code that I use for Archive my Interactive form like PDF document.
Salvataggio nell'ArchLink ********************************************
Ricavo il PDF Source
DATA: elem_context    TYPE REF TO if_wd_context_element,
        stru_context    TYPE        wd_this->element_context ,
        item_pdf_source LIKE        stru_context-pdf_source.
get element via lead selection
elem_context = wd_context->get_element( ).
get single attribute
elem_context->get_attribute(
    EXPORTING
      name = `PDF_SOURCE`
    IMPORTING
      value = item_pdf_source ).
DATA: l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
l_ref_cmp_usage =   wd_this->wd_cpuse_zcentral_person( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
    l_ref_cmp_usage->create_component( ).
ENDIF.
DATA: l_ref_interfacecontroller TYPE REF TO
                                  ziwci__wdr_ess_central_person.
l_ref_interfacecontroller = wd_this->wd_cpifc_zcentral_person( ).
l_ref_interfacecontroller->store_adobe_document(
    ar_object    = 'ZHRDETRAZ'        " Toaom-ar_Object
    doc_type    = 'PDF'                    " Toadv-doc_Type
    object_id    =   objid                    " Sapb-sapobjid
    pdf_source =   item_pdf_source    " Xstring
    sap_object =   'PREL'                  " Toaom-sap_Object ).
METHOD store_adobe_document.   ***********************************************
Converto la XSTRING del PDF in tabella binaria
DATA: l_tab TYPE TABLE OF tbl1024,
        lenght TYPE i.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer        = pdf_source
    IMPORTING
      output_length = lenght
    TABLES
      binary_tab    = l_tab.
Calcolo la dimensione del documento
DATA: doc_id TYPE saeardoid,
        size   TYPE i,
        lineno TYPE i,
        length TYPE i.
DESCRIBE TABLE l_tab LINES lineno.
size = lineno * 1024.
DATA toaom_fkt TYPE TABLE OF toaom.
CALL FUNCTION 'ARCHIV_METAINFO_GET'
    EXPORTING
      ar_object = ar_object
      sap_object = sap_object
    TABLES
      toaom_fkt = toaom_fkt.
CALL FUNCTION 'SCMS_AO_TABLE_CREATE'
    EXPORTING
      arc_id   = 'ZP'
      doc_type = doc_type
      length   = size
    IMPORTING
      doc_id   = doc_id
    TABLES
      data     = l_tab.
Create link to business object
CALL FUNCTION 'ARCHIV_CONNECTION_INSERT'
    EXPORTING
      archiv_id             = 'ZP'
      arc_doc_id            = doc_id
      ar_object             = ar_object
      mandant               = sy-mandt
      object_id             = object_id
      sap_object            = sap_object
      doc_type              = doc_type
    EXCEPTIONS
      error_connectiontable = 1
      OTHERS                = 2.
ENDMETHOD. ********************************************************************

Hi Davide,
I have a requirement where I just need to SAP HCM Archive Adobe form in External repository.
Since you are using the archiveLink functionality.
Can you please help me how you did?? What configurations need to be maintained for this?
I am new to this. I did some Rnd on it and found that it can be achieved using HRFORM_HRF02 Business Add-In in the SET_ARCHIVE_INDEX method.
But I have no clue how to do it?
Can you please help me?

How to use Adobe Interactive forms with ISR frame work in Webdynpro forJava

Hi,
Anybody worked on Adobe Interactive forms with ISR frame work in Webdynpro for Java in ESS/MSS development.
We have already searched in ISR_Cookbook_2004, however we didn't anything related webdynpro for java in that.
Any information regarding this will be of great help.
Regards
Satish Kumar

There are a number of issues here. A form that you created with LiveCycle Designer (XFA) cannot be used with FormsCentral. An Acroform, the kind you can create with Acrobat, can be used with FormsCentral, with certain limitations, one of which is skip logic. A dynamic XFA form allows for this type of thing, but as mentioned, they don't work with FormsCentral. You can set up an Acroform to show/hide or activate/inactivate fields based on selections or entries made in other fields, but you'd have to set this up in Acrobat, not FormsCentral. So you can set up something roughly equivalent to a web form's skip logic, but you'd have to learn how to do this in Acrobat using JavaScript. There is a separate Acrobat JavaScript forum here if you have any questions.

Hanging issue - with adobe interactive forms

Hi Guys,
I' am facing the following problem with the adobe interactive forms. After the successfull completion of 6 to 7 round trips,
the form is hanging next time. Let me know if you people have faced the same issue and what was done.
Thanks,
Aravind

Hi,
Some more information on the issue. I' am using HCM forms and processes to develop the forms.
Ther problem is only happening to two forms which are more than 200Kbytes. Is there any size
restriction for the adobe forms developed. if yes, please let me know.
Thanks,
Aravind

Credentials to use adobe interactive form

Hi
I see an OSS note that talks about creating a OSS ticket to SAP requesting them for credentials to use an adobe interactive form.
We are on ECC 5.0 ( WAS 640 ) and intend to generate an adobe interactive form using a combination of adobe livecycle designer ( T.code SFP ) and an ABAP application program that sets the generated pdf property to fillable = 'X'
Question is - is there any extra licensing code required to get this credentials to SAP.
Please reply.

Hi Karthik,
Please refer to the below note for your reference on Interactive form licensing:
eason and Prerequisites
The interactive use of PDF forms may be subject to license under certain circumstances.
Solution
Using the tools and using print forms (not interactive) is part of the license of the relevant SAP solution (including NetWeaver).
If the following three criteria apply to you, you must purchase an additional license from SAP for your SAP Interactive Forms:
You create templates for interactive forms.
You create your own customer-specific interactive form templates or change an interactive form template delivered by SAP by adding further interactive fields or changing the data binding of existing interactive fields to the back-end.
(Such modifications exceed cosmetic changes in form templates delivered by SAP such as adding your own logo or static texts, and are therefore subject to license.)
You use interactive forms in a productive system, that is, end users fill in generated PDF forms during business operations.
Note that the additional license also affects interactive forms used by SAP partners (independent software vendors - ISV), who deliver these forms as part of their products developed on the SAP NetWeaver platform.
Current information about licensing is also available on SAP Service Marketplace at http://service.sap.com/Adobe --> FAQs.
The license for SAP Interactive Forms is an official SAP license. For further details, consult your contact person in your local SAP sales office.
Regards,
Arafat

Unable to close browser when using Adobe Interactive Form

Hello,
I'm using an Interactive Form in my Web Dynpro application. Everything works fine, but when the view with the Interactive Form is active, I am not able to close the browser window anymore. Moving to another view is also not possible.
I already changed all the options of the Interactive Form but always the same behaviour.
I am developing on Web AS 6.40, Service Pack 11. ADS is installed also with Service Pack 11.
Adobe Reader is Version 7.0 and Adobe Designer is Version 7.1
Has anyone an idea what's wrong?
Thanks for your help!
Best regards
Christian

Hi,
I am facing a problem with viewing SAP interactive forms.
I have the SAPForms.api in Adobe reader plugins but is outdated (19th apr, 05). How do I get the new one and how do I register it ? This same scenario works on a colleague's machine with same config except the SAPForms.api which is latest. (Nov, 05)
Any pointers will be highly appreciated.
Thanks,
Samar

Navigation problem while using Adobe interactive form in web dynpro

Hi frds,
I have a 2 views..
1st view contains an ADobe from and a button to navigate to the 2nd view..
No problem with the first view.. displays everything...
The Problem is when i click the button to nsvigate to the 2nd view, its not loading...
Wait symbol is coming...
Please Help me friends...

hi ,
pls use the ZCi layout for the adobe interactive form .
Need to Insert the web dynpro script to the form.
Note: Make sure to upgrade the Adobe Interactive for ZCI type using SFP_ZCI_UPDATE transaction
Subsequently, check whether the update of the ZCI was successfully completed. To do this, open your form in the Adobe LiveCycleDesigner and check the version information of the ZCI script. The ZCI script is available on the "Hierarchy" tab page under the "ContainerFoundation_JS" name. The version must be800.20080513120641.469612.469346.
You can also have a look at this e-learning.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20029530-54ef-2910-1b93-c41608ae0c90
Refernce thread : adobe online interactive form
regards ,
amit

Printing chinese characters on a Zebra printer using Adobe Interactive Form

Hello,
We have created an Adobe Interactive Forms in SAP with some words in English and another one in simplified chinese. We have defined a Zebra printer in SPAD with the AZPL203 driver.
When we print the form in the zebra printer some of the chinese characters are printed and some of them no.
Has anyone faced the same problem?
Thanks a lot
Miquel A. Vergara

Hi,
Welcome you post on the forum.
However, this is not the right forum for you. It is only for SAP Business One user. Please search entire forums first to find which one is more proper.
However, this issue may not be related to SAP at all. Search on the web would be better.
Thanks,
Gordon

Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

Dear All,
i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other parts of the editor or he wanted to save what he did...
Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
Thank you for your help in advance.
All the best, P. Phil.

Yes, you need the lifecycle designer installed. That should be enough to work with the SFP transaction. But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
Regards,
Rich Heilman

Do you have to buy License to use Adobe Interactive Forms in WebAS

Hello,
Im testing at the moment the NetWeaver Java Trial with Web Dynpro (Java) and Adobe Interactive Forms.
You have to download Credentials and install it to use interactive forms in the Trial version. These are valid for 2 month.
I would like to know if you have to buy and install the Licenses to use (in the full amount, with digital Signatures etc.) the Adobe interactive Forms in the Fullversion of NetWeaver ?!
A Link to a document of SAP or Adobe to this topic would be really helpful.

Hello,
You will find the Adobe Forms Licensing information at links below:
1) Licensing Adobe Document Services
http://help.sap.com/saphelp_nw70/helpdata/EN/9f/36b2ca6a2642c2b8412677eb1fe9c0/frameset.htm
2) Also, have a look at SAP Note 750784 (SAP Interactive Forms: Licenses)
Hope this helps,
Harman

Heavy performance issues using Adobe Interactive Form PDFs generated by SAP BPM

Similar Messages

Maybe you are looking for