Height of CRM Transaction in EP

Dear All,
There is one CRM transaction whoze height is more in EP due to which scrolling is coming on page...
can you let me know wch property shd be changed in that iview so tht height wll fit to page....
I did changed heigh type to fixed and made it 80 px.
but still there is no change while iview appears.
iview is in WINGUI format and wch culdnt b chngd as its a req....
Response awaited.
Regards,
Purav

Hi,
I found it. The folder has  created as page and  it has set up as hide to the drill down transactions.
Thanks for your support.

Similar Messages

  • CRM - transaction BP - length of search term 1/2 (adress)

    Hey,
    I'm working on CRM, transaction BP. I've 2 roles for customer : person and organisation.
    Search term 1/2 is 20 caracters long.
    But, it seems to be possible to do customizing on search term. For example, in my environnemnent, customer person may have 20 caracters long search term ; but customer organisation must have less than 10 caracters (there is an error message if I put a more than 10 caracters search term).
    Could you tell me how in customizing I can control length of search term ?
    Thanks
    Baptiste

    Hi,
    I dont think there is any customizing for this change in length. You can instead to achcek of length in dchck event of BDT.
    Smita.

  • How to call standard CRM transactions into Webdynpro component

    Hi,
    i have a requirement where i need to call the the standard CRM transaction like <i>activity worklist</i> and <i>activity creation</i> into the webdynpro component. Please let me know how to do it, would appreciate it, if provided with a sample code.
    Thanks,
    Suri

    Hi Suri,
    You could use suspend/resume mechanism to jump to the ITS version of these transactions (in case they are ITS-enabled). Starting the SAPGUI from within the browser environment, transferring data/starting a transaction and then returning to the browser is not possible.
    Best regards,
    Thomas

  • How to divide the CRM transaction data by company cord?

    How to divide the CRM transaction data by company cord?
    CRM transaction have not company cord, so how to divide the data on BI report by company cord?
    Do I have to get the sales organization from customer master?
    Some transactions have not master data like lead. I want to know your experience.

    Hi
    This is self reply.
    I should use the sales organization instead of company cord.
    But some business like lead from contact from customer can not separate the company, in situation one call center for multiple companies.
    We should use another field to divide the company. Ex. Product, campaign, etc.
    If someone knows better way to solve this issue, let me know the reply.
    Regard
    u1

  • How to call a CRM transaction from WDA  component

    I have requirement where i need to open the CRM transaction CRMD_BUS2000126 from WDA with the object id selected in the context. To be more specific all i need to do is to open the activity screen of a particular give activity number from a WDA component.
    I have checked out the previous threads there is a solution how to fire a transaction from WDA, but i need to send a parameter to this transaction to open that particular activity number screen.
    please advice asap.
    Thanks,
    Shyam

    Karthikeyan,
    Please make sure that flag attribute is under some node, say NODEA. NOW please select the interface node property and input element  of NODEA.
    now NODEA will be available in interface controller. Interface controller acts like a global  controller between two different components.
    So from interface controller you can take that flag value.
    pls reply back if you have any confusion.
    Regards
    Srinivas

  • CRM Transaction Launcher- Launching transactions of remote server

    Hi Experts,
    While using CRM Transaction Launcher is it possible to launch transactions of a remote system (SAP ECC 6.0 Transaction: va01)
    Is it possible by giving the Logical System option in the Transaction Launche wizard as that of the ECC server??
    Regards,
    Litty Joseph.

    Yes you can do it.
    Please refer to :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true
    Regards,
    BJ

  • How does system status influence the crm transactions?

    Dear CRM Experts,
    Can you please clarify the use of system status in the crm transactions?how it's control or influence the crm transactions.can we link  the R/3 and CRM transactions using system or user status?how user status & system status are linked?
    Please provideme the solution for  the above mention points.
    Warm regards,
    Ronnit

    hi
    Using status management, you can find out about the processing status of a business transaction, and change individual statuses. Each status informs you at header and item level that a specific status has occurred (for example, quotation has been released), and specifies which step may be executed next (for example, release is allowed).
    *user status*
    A status set by the user to complement the system status for a given status object.
    You can use only a user status belonging to a status profile (defined in Customizing) and assigned to the relevant status object.
    User statuses enable you to extend the control of business processes managed by the system status. You can set and delete user statuses manually when carrying out business transactions.
    *System Status*
    A status the SAP System sets internally as a part of general status management.
    This status tells the user that a certain business transaction was performed for an object.
    moreover using user status is customised,you can mainatian your own user uset status and control the system response as decided by the system status
    for this you can make your status profile which when you atach to your transaction can be used in particular transaction*
    *Status Profile*
    A profile used to control user statuses.
    A status profile is created by the user in general status management.
    In a status profile you can:
    Define the sequence in which user statuses can be activated*
    Define initial statuses*
    Allow or prohibit certain business transactions*
    *more about system status*
    Each marketing project goes through various system statuses, one of which is always set:
    ·        Created
    ·        Released
    ·        Finished or Rejected
    ·        Locked
    ·        In Process
    ·        Approved
    *System Status Overview*
    *Created (CRTE)*
    Use
    In the Created status, you structure the marketing project and enter plan values and dates.
    Features
    This system status is the initial status for new marketing projects. The status is set automatically when you create a new marketing project.
    The status does not allow you to:
    ·        Transfer to ERP
    ·        Transfer the target group to the channel
    *Released (REL)*
    *Use*
    Structuring is complete and the marketing project is released for the operative execution of the marketing activities.
    Prerequisites
    The marketing project has the Created status.
    Features
    In the Released status, you can create new, lower-level marketing projects and change the hierarchy. The Released status is passed on automatically to lower-level marketing projects.
    *Finished (FINI)*
    Use
    This status identifies a finished/completed marketing project. A marketing project with the Finished status can no longer be changed.
    Prerequisites
    The marketing project has the Released status.
    Features
    Lower-level marketing projects belonging to the same marketing project are also finished automatically. This does not apply to lower-level marketing projects that have the Finished or Rejected status.
    You can revoke the Finished status. The system then automatically revokes the status for all upper-level marketing projects in the relevant marketing project. For this, it is prerequisite that none of the marketing projects on a higher level to the relevant marketing project are finished or rejected.
    more details you can see in
    http://help.sap.com/saphelp_crm50/helpdata/en/81/1ba63a28195840e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_crm50/helpdata/en/c5/e4aed5453d11d189430000e829fbbd/frameset.htm
    check out table JEST and TBOJ!,for system status and object relationship,along with user status.
    guess i have cleared your doubt
    best regards
    ashish

  • Custom Heirarchy on CRM Transaction type

    Hi Experts,
    We have got something to work on an Info Object called (CRM Transaction type-CRMTP) which has got a custom hierarchy on the source side (CRM System).
    Our task is to get that hierarchy in FI (COPA) area to use for some purpose.
    While this object has been added on the source at the COPA Operating concern level, it shows up as Business Transaction type (0CRM_PRCTYP) as the corresponding BI content for it.
    While looking into the Info Object (0CRM_PRCTYP) , it shows however that the object is not supported with any hierarchy though.
    When we tried to dig deeper and see that if there any Data source for this for the matter we could not find anything for Hierarchy (but one for Text 0CRM_PROC_TYPE_TEXT only).
    So at this point of time we were wondering if there is any data sources really available for the matter and if not what can be the optional way out if business determines it has to be done.
    we know maintaing some hierarchies in BI as a display one but that would take a toll given that if the no./Values can go in large for this and it can be very cumbersome process to maintain that if the changes are frequent on the source...
    Any ideas please what should be a threshold limit for maintaining a hierarchy on BI side in case and/or what should be the restrictive parameters please before going for any such ideas or if at all this would be a good idea please?
    Thanks&Regds.

    Hi Sathya,
    Sorry to mistype as this is custom built Hier in ECC COPA and not in CRM...
    also,
    the Hierarchy is based on the char. CRM Trans. Type (CRMPT) with a variant 2 (PLS CRM Transaction Types) , TCode:KES3
    and the hierarchy look slike something below...
    PLS Plant Services (top most level node)
         PREX Remanufacturing/Exchange (2nd level node)
                   PECO Economy Service (3rd level node)
                             AB  ECONOMY MANUFACTURING SERVICE (4th level node)
                             DC  ROOT CAUSE FAILURE ANALYSIS        (4th level node)
                    PSTD  Standard Service (3rd level node)
                             EF  STANDARD SERVICE (4th level node)
                   PRPT  Priority Service (3rd level node)
                   PINT   Internal Manufacturing (3rd level node)
        PTHP   Third Party Repairs (2nd level node)
        PCON  PLS CONTRACTED SERVICE (2nd level node)

  • CRM transactions activation

    Dear Experts,
    I am new to CRM. I want to activate CRM transactions in my ERP system. I came to know that there is some SAP report which I have to schedule in background & which will run for few hours which will activate CRM settings in my system. Can you please let me know the name of the report. Thanks.
    Br
    Bharath

    hi friend,
    i'm facing the same issue, can you please help me to slove.
    points will e rewarded
    regards
    felix

  • List of CRM Transactions

    Dear Colleagues,
    Is there any place or transaction where I can see all the CRM transactions (TCODE)?
    In TR SE16 --> table tstc, we can see all the TCODEs, but I want to see only CRM related TCODE.
    Regards
    Pankaj

    Hi All,
    I had the issue about knowing the Tcodes in SAP CRM.
    I have tried by table TSTC and search by CRM.
    This gives me about 800 tcodes and that helped me.
    Go to Tcode SE16 and table name as TSTC and put CRM and press F4 on your keyboard.
    It will list the tcode for CRM.
    I know these are not all of the codes in CRM but this worked for me.
    Hope this helps anyone.
    Thanks
    Praveen

  • Validate Phone Number in CRM - transaction BP

    hello, I am interested in validate the phone number inserted by the user when creating a new business partner, while using transaction BP in CRM.
    IS there any BADI or user-exit to validate this kind of data of the business partner for de BP transaction??
    Thank you a lot!

    Hello all,
    we have this same problem and have almost solve it.
    We have created a Z function module, which has been inserted in the BDT calls for event DCHCK. Our FM is rightly called and we are able to send an error message using FM 'BUS_MESSAGE_STORE'.
    Then, our problem now is: How to get the values for telephone, mobile and e-mail address?
    We need to check this data, but are not able to see it in the debugger...
    Thanks in advance and Best Regards

  • Assign CRM transaction type to a sale office

    Hi,
    I would like to know if I can assign transactions types to sales office in the CRM organization model, By using this, I would avoid to create security roles if I assign the users to the sale office.

    Hi Pascal,
    As far as security roles mainatenace for users through this is not possible and let me check on the attribute and will update you.
    Thanks
    Srini

  • Dunp in standard SAP CRM transaction?

    In Transaction CRMD_ORDER while creating moification order from activation order, inside the ITEM Selection TAB in theOBJECT TAB following dump is coming.
    Short text
        More than one radio button active
    What happened?
        The current screen processing action was terminated since a situation
        occurred where the application could not continue.
        This is probably due to an error in the ABAP program or in the current
        screen.
        While preparing the screen
        "SAPLCRM_SERVICE_ROB_UI" 7102 for screen display, it was detected that in a
         group of radio
        buttons, there is more than one field set.
    Error analysis
        In a group of selection fields (radio buttons), there must be always
        exactly one field set, that means, it must have the value 'X'.
        If that is not the case, then one of the following situations occurs:
        - Several selection fields of the group are set simultaneously.
          This is an error and leads to the termination of the application via
          the current short dump.
        - No selection field from the group is set:
          In this case, the first selection field is set by the system before
          screen output. This indicates careless programming of the
          application, but does not lead to an error situation.
    How to correct the error
        In this particular case it is about the checkbox
        "CRMT_7102_SRV_REFOBJ_UI-MAIN_OBJECT (2)"
        of the screen
        "SAPLCRM_SERVICE_ROB_UI" 7102 .
        In the group of the selection fields - where this field belongs to -
        another field is set, or even several.
        The application program
        "SAPLCRM_SERVICE_ROB_UI"
        must be corrected, so that it is guaranteed that in every group of
        selection fields, exactly one is set, that means, it has the value 'X'
        The other fields, which are not set, have the value SPACE.

    Mukul,
    Could this be due to the fact that SAP GUI really isn't supported anymore in CRM 2007 for maintaining business transactions.  You probably need to post this in the CRM general & framework as this is more CRM SAP GUI question that something related to the new release directly.
    Take care,
    Stephen

  • CRM - Transaction Launcher

    Hi Guys,
    I'm trying to configure transaction launcher for transaction VA11 (ZDD_VA11).. I've done all the necessary settings but when I try to test it via Web client, it gives following error..
    Error:-
    Detail transaction ZDD_VA11 not defined.
    Detail Launch transction not defined.
    Execution not possible; error in launch transaction.
    Is there a report that needs to be run to convert the logical system correctly for the mapped logical system on the transaction launcher method? What is that report or program and how do I run that to over come that problem...
    Thanks,
    KP.

    Hi Gurus
    I am trying to configure URL on WEB UI thru transaction launcher in SAP CRM.
    I am getting the following errors
    Error within a launch transaction
    Launch transaction handler does not exist
    Launch transaction ZWEBPAGE not defined
    Launch transaction not defined
    Could please let me know where I went wrong .
    Thank you
    HK

  • Price Update in CRM Transactions

    Hi,
    We are using CRM 2007 with ECC6 integration, and R/3 Pricing.I have
    performed initial load of Pricing condition objects(DNL_CUST_CNDALL,
    DNL_CUST_CND,DNL_CUST_PRC,DNL_CUST_CND_PR,DNLCUST_FGD)and have
    performed Pricing procedure determination for transactions.
    When I create a transaction, pricing procedure is determined correctly.
    However, condition types do not appear in the "Conditions" tab. If I
    try to maintain the condition type manually, system displays error
    message as "Condition type does not exist in Pricing procedure".
    However, this condition type is maintained in the pricing procedure.
    I have refreshed the IPC Buffer in SM53->Cache Info->State->Delete and
    executed function module "IPC_DET_CLEAR_CUST_BUFFER" as well. However,
    this does not help. IPC does not refresh even if we wait for days together
    Anybody has got clue on this issue?
    Regards
    John C

    You need to check if the customising download is allowed in your existing client... usually if it is production environment, the client independent chnages are not allowed to be donwloaded from ECC to CRM...
    solution is that you need to ask basis to open the client and then download all customising chnages from ECC to CRM..then run the IPC_Det--- function module to clear the biffer after the download is done..
    rgds,
    Venkat

Maybe you are looking for