Hello, Could someone help me with lightroom 6. I can't seem to buy the upgrade from lightroom 5 to 6 on the desktop. Thanks.

Hello, could someone help me with lightroom 6. I can't seem to buy the upgrade from lightroom 5 to six on my desktop? Thanks.

Products
if that link doesn't work for you contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Similar Messages

Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

   Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20" with Mountain Lion 10.8.4 ?
   Thank You,
                            leetruitt

   Barney, William, nbar, Galt\'s Gulch:
   A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician. The tune up wiped over 1200 titles of my music in iTunes, also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get variations of this:
ACL found but not expected on
"private/etc/resolve.conf"
"private/etc/raddb/sites-enabled/inner-tunnel"
"private/etc/rabbd/sites-enabled/control-socket"
     Also, after four years of intense daily use it is cluttered with much junk, and every app that I was curious about, and I am a very curious guy.
   So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
   Crazy, I know, but to me a Mac represents something far beyond the ordinary input ➛ process ➛ output title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
    So, these are my reasons for wanting to do a clean install, correctly.
        Thank you, Truitt

Could someone help me with comparing the contents of 2 folders?

I'm trying to compare my iTunes music folder which is located in it's default location with a external USB hard drive. I was reading this article on how to do it using Terminal but I have NO CLUE on what to type in the command line. I'm clueless on this! Could someone help me with the commands I need to compare the 2 folders? I've included the link about what I'm trying to accomplish.
http://www.macworld.com/article/132219/2008/02/termfoldercomp.html

I tell you how. But remember that Terminal isn't a good place to be kicking around if you're not sure of what your doing. You can issue many commands as root that are irreversible. Tread very carefully, or get yourself a good GUI utility that can do that.
It's asking you to cd (change directory to the folder that your files for comparison are in.
So, you type, cd (leave a space) then you can just drag the folder to the Terminal and it will fill in the rest of the path.
Then press Return
Then type this at the prompt:
diff -rq folder1 folder2
(replacing "folder1 folder2 with the name of your folders. Leave spaces where indicated.
Press return.
-mj

TS2755 Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this??

Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???

Check this article: iOS: About Messages
Additional Information
You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number.

Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic.

Could Someone Help Me With An Old Cisco LocalDirector?

Hello. I recently purchased an old Pix LocalDirector from eBay. As one would expect, it came with no documentation or configuration notes but for $20.00, it was hard to resist. The seller didn't know if it even worked. I thought I'd take a chance and to my suprise, the little old Pix fired right up and ran. Unfortunately, the last user failed to clear the enable password, so I can't get into it to reconfigure it for use in my little home network. I registered myself here on the Cisco web site in hopes I could download the unlock key file but the web site said I had to purchase a service agreement from Cisco before I coul;d get this file. Well, I know from myt professional IT past that I couild never afford one of those agreements for myself and considering this is a well-beyond end-of-life product, I doubt they would sell me one anyhow. So, can anyone tell me if there's a way to clear the password in the hardware? Is there peradventure someone at Cisco who might turn loose of of a key file to this old thing? As I mentioned, it's a Pix LocalDirector running software version 4.2(4), according to the "show version" command. The serial number is: 18003122. Could someone out there help me with this? Thank-you. Mike.

Well, I guess "Someone" ended-up being me. I located a source for the password recovery/resetting disk (using Micro$oft's search engine: Bing - much to my chagrin - Google, go hang your head in shame), and created one disk for the 520 and one for the LocalDirector. I then loaded them up, one at a time, reset, and Presto! The enable passwords were cleared and I am now able to reconfigure the interfaces and everything else. I'd pat myself on the back but it hurts and looks ridiculous. Bye for now, all!

Could someone help me with class Process getErrorStream() ??

Hello
I want to execute process "/usr/bin/octave" .So I have to write to its input and read its output and error stream. I have written program and it works good until I need to read error stream of process. After I read the error stream of process i receive the IOException Broken pipe. It looks like after read the data from error stream process is closed so I coudn't write anything to the input stream (what i could do before reading from error stream). The errors I receive :
java.io.IOException: Broken pipe
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
at java.io.BufferedOutputStream.flush(Unknown Source)
at sun.nio.cs.StreamEncoder$CharsetSE.implFlush(Unknown Source)
at sun.nio.cs.StreamEncoder.flush(Unknown Source)
at java.io.OutputStreamWriter.flush(Unknown Source)
at java.io.BufferedWriter.flush(Unknown Source)
at wazna$3.run(octave.java:116)
at java.lang.Thread.run(Unknown Source)
And here is my code:
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.io.OutputStreamWriter;
public class octave{
public static void main(String[] args) throws IOException, InterruptedException {
Runtime r = Runtime.getRuntime();
final Process p= r.exec("/usr/bin/octave");
System.out.print(">>");
InputStream iss = p.getInputStream();
BufferedReader br =
new BufferedReader(new InputStreamReader(iss));
try {
while (iss.available() == 0) { }
while (br.ready())
System.out.println(br.readLine());
} catch (IOException e) { e.printStackTrace();}
String s=null;
do
System.out.print(">>");
BufferedReader in = new BufferedReader(new
InputStreamReader(System.in));
s = in.readLine();
if (s.equalsIgnoreCase("exit"))
System.out.print(">>");
System.out.print("END");
else
Thread reading = new Thread(
new Runnable()
synchronized public void run()
InputStream iss = p.getInputStream();
BufferedReader br =
new BufferedReader(new InputStreamReader(iss));
try {
while (iss.available() == 0) { }
while (br.ready()) {
System.out.println(br.readLine());
} catch (Exception e) {e.printStackTrace(); } }
Thread error = new Thread(
new Runnable()
synchronized public void run()
InputStream err=p.getErrorStream();
BufferedReader er =
new BufferedReader(new InputStreamReader(err));
try {
while (err.available() == 0) {
while (er.ready()) {
System.err.println(er.readLine());
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
final String g=s;
Thread writing = new Thread(
new Runnable()
synchronized public void run()
OutputStream oos = p.getOutputStream();
BufferedWriter bw =
new BufferedWriter(new OutputStreamWriter(oos));
try {
bw.flush();
bw.write(g);
bw.newLine();
bw.flush(); //LINE 116 where is an error
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
writing.start();
reading.start();
error.start();
while (!s.equalsIgnoreCase("exit"));
Message was edited by:
tazja
Message was edited by:
tazja

I know it's a bit late for this. But I hope it will help all the people who encountered this problem.
The only way to let octave work with streams is to use the --interactive switch (otherwise it will crash on the first error). Rembember that using this will need a different way to read data (BufferedReader won't work well).
Hope this helps anyone, I spent very much time figuring this.
Bye

Could someone help me with the correct syntax.

I have the following statement in a scriplet:
out.println( " <td width=\"22%\"><A HREF=\"ContractAdmin.jsp?contractNumber=" + <jsp:getProperty name="contractBean" property="cnum"/> + "\">" + <jsp:getProperty name="contractBean" property="cnum"/> + "</a>" );
The JSP will not compile. Could someone tell me what I'm doing wrong.
Thanks in advance.
Dosteov

Hi dosteov ! =O)
I think, the problem is that You are trying to mix scriptlets & jsp tags. If you will correct Your expression to this one:
out.println( " <td width=\"22%\"><A HREF=\"ContractAdmin.jsp?contractNumber=" + contractBean.getCnum() + "\">" contractBean.getCnum()+ "</a>" );
it should work. Anyway - trying to execute the tags inside the scriptlet leads to the JSP compiling problems.
I hope it helps.
Regards =O)

Could someone help me with my iphone 5?

I am not sure if anyone has this problem at all but please see the video below.
http://i1343.photobucket.com/albums/o796/kyrasym/VID_20140524_172214_zps0e1eb0b4 .mp4
I get this like 6 to 7 times a day which is very annoying. Whenever I press the sleep/wake button. My phone wakes but instantly goes back to sleep again. I have brought it to the apple authorised service center TWICE. The first time they told me that there is a problem with my sleep/wake button so they changed it. Brought it home used it for about 4 days and the problem came back. Brought it back again to the service center but they told me there is nothing wrong with my phone even when I showed them this video of my problem. If someone from apple could please advise what I am supposed to do?

Kyrasym wrote:
No one here has this problem?????
It seems not

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

Could someone help me with accessing a program for a limited account holder

Hi I just updated my G4 Mirror door computer with 10.4.7 and I cannot allow a user to use a specific software application through parental controls. The user has access through "get info" (can read & write) but when I use the accounts settings/parental controls/locate and then add the application it seems to add it fine. I then click "ok" and when I open "locate" again to see if it has added the program to allow the user to use it; it isn't there. I tried running repair permissions; repair permissions from the install disc (locks up the machine) and reinstalled the software (Carrara 5) with no success. I also updated a G4 powerbook & a different G4 machine and the programs work fine. Any help would be greatly appreciated.
G4 Mac OS X (10.4.7)

..."when I open "locate" again to see if it has added the program to allow the user to use it; it isn't there."...
The description is similar to a problem that was fairly common under "Panther" - complaints in "Tiger" still do pop up occasionally, but not as often so it may be a different issue. Under "Panther", the problem (which I don't think was ever resolved) was that the act of attempting to view the state of the system resulted in changes to the system. For whatever reason, the "Accounts" pref pane was not able to read 'mcx_settings' (where user limitations settings are stored), causing it to display incorrect information which was then saved when the pref pane was closed again. A workaround for that problem was to configure the user limitations, immediately closing the pref pane, and resisting the temptation to open the "Limitations" tab (now called "Parental Controls") - as long as the "Accounts" pref pane wasn't given the opportunity to overwrite the settings, the user was able to access the programme.
There is another fairly common problem affecting user limitations where programmes lacking eg. a (unique) 'CFBundleIdentifier' can't be added to the "allowed" list. The fact that the current programme can be added on other machines suggests that this is not the issue here, but if there are older versions of the programme, or perhaps other programmes from the same company, their presence might affect the system's ability to recognize the specific programme so if any potential conflicts exist, it might be worth trying to hunt them down and eliminating them.
A different approach might be to try using "Workgroup Manager.app" to configure 'mcx_settings' it is included with the "Server Admin Tools" which can be downloaded from Apple. It may not be as user friendly as the "Accounts" pref pane, but seems to be less finicky...
By the way, if the account is a "Simple Finder" account rather than a "Some Limits" account, access to problematic apps can be granted directly by adding an "alias" file to the user's "home" directory, since "Simple Finder" doesn't actually restrict application use.

Could someone help me with arrays & recursion??

Hi, I'm new here and I'm having trouble.
I have to write a java application which uses recursion to find the maximal contiguous sum in a list of integers.
The input is read from a text file where each line represents a list containing the following integers:
For example, it might contain
7 -2 -4 30 15 -7 -5 1000
2 -50 100
6 1000 -2000 900 2800 -2900 2801
4 100 -10 5 8
4 100 -50 5 8
And for the output, for each line of data read, I have to display the largest sum of consecutive integers in the list followed by the list itself. For example for the lists above, my output would be:
(on the left side is the largest sum of consecutive integers and on the right is the list of integers)
1033

R.S. wrote:
Hi, I'm new here and I'm having trouble.
I have to write a java application which uses recursion to find the maximal contiguous sum in a list of integers.
The input is read from a text file where each line represents a list containing the following integers:
For example, it might contain
7 -2 -4 30 15 -7 -5 1000
2 -50 100
6 1000 -2000 900 2800 -2900 2801
4 100 -10 5 8
4 100 -50 5 8
And for the output, for each line of data read, I have to display the largest sum of consecutive integers in the list followed by the list itself. For example for the lists above, my output would be:
(on the left side is the largest sum of consecutive integers and on the right is the list of integers)
1033Where did this 1033 come from? Could you explain your problem in a bit more detail and also post what you have done so far and explain where you are stuck: only posting the problem description sound a bit like "can some one do it for me", it's better to ask a specific question here.

Could someone help me with my action script?

I followed a tutorial on how to make an interactive photo gallery but for some reason the file isn't working. I am new to flash and no very little about action script.
Would someone be willing to take a look at my file and advise me?
Thanks

Did your tutorial have you download XML from a server to feed the images to the gallery? Many people forget to check for errors loading the XML file or forget to "do something" once the XML is loaded. Common things not to look for are IOErrorEvent.IO_ERROR or SecurotyErrorEvents warning you the XML you're trying to load is on a different domain (a webserver online) and it doesn't have permission (a crossdomain.xml).
In those situations it can appear like it's doing nothing.
Did you just take the code of the tutorial at the end and try to play it as you went through the tutorial? If you just copy and pasted it all you'lre going to have a hard time isolating the issue. In that case you can always re-do the tutorial until you start to see issues. Then you know where they are.

HELP!!! Could someone help me with a jar file issue and JRE 1.3 & 1.4

We had a problem with the last Oracle patch in that it tried to extract from a jar file using the "jar" executable. But the jar executable is not installed on the server where we have JRE 1.4
On one server, Jar.exe is installed where we have JRE 1.3. Is the jar.exe apart of JRE 1.4? If so, where do I find the jar.exe file? If it's not part of JRE 1.4, what do I need to do to get the jar.exe onto the server where JRE 1.4 is installed?
Thanks, Carl

Thanks for your replies.
I know that a jar file is like a zip file but I'm asking, "Can you download just the jar.exe without downloading the JDK?"
I keep reading everywhere that you can only get the jar.exe tool if you download the JDK but I can't use JDK(because it is a compiler) on our website here at work.
Thanks,
Carl

HELP!!! Could someone help me with a jar file issue and JRE 1.3 and JRE 1.4

We had a problem with the last Oracle patch in that it tried to extract from a jar file using the "jar" executable. But the jar executable is not installed on the server where we have JRE 1.4
On one server, Jar.exe is installed where we have JRE 1.3. Is the jar.exe apart of JRE 1.4? If so, where do I find the jar.exe file? If it's not part of JRE 1.4, what do I need to do to get the jar.exe onto the server where JRE 1.4 is installed?
Thanks, Carl

The jar tool isn't part of the jre but the jdk. You should find it on your server in %ORACLE_HOME%\jdk\bin (seems you use some kind of Windows).

Hello, Could someone help me with lightroom 6. I can't seem to buy the upgrade from lightroom 5 to 6 on the desktop. Thanks.

Similar Messages

Maybe you are looking for