Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currenty able to see or process his images. Can you please help? thankyou!
Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!
According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted.
Similar Messages
-
Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?
Hi Tyesha,
Your DVD won't eject?
Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop. -
My brother lock his ipod can you please help me to unlockit please thank you
hi can you please help me to unlock my brother ipodtouch thank yoiu
Steps you know to do:
*Put the iPod touch 5/4 into Recovery Mode or DFU Mode for 10 seconds by holding Power and Home button.
*If you want to perform Recovery Mode, keep holding Power and Home Button for 30 seconds and let it go.
*If you want to perform DFU Mode, let it go from power button and keep holding home button until iTunes logo appears.
*When you're inside Recovery or DFU Mode, click OK.
*To erase and unlock by removing the passcode, you need to restore. Click Restore iPod to continue.
*Click Restore and let iTunes verify the restore to stock version.
*Once is completed, done and ready to go.
If the problem still continues, go to the Premium or Authorized Apple Reseller to make an service for iPod touch or make an appointment for Genius Bar about iPod hardware and repairs.
Does it works? Let's hope it works! Good luck!
-Bingo -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
I bought a used iphone from a friend and I am not able to use it in Ethiopia. It is carrier blocked. Can you please help how could I unlock my iphone 4?.
Unlikely as you do not meet there requirements for unlocking.
Have your friend the provided the phone contact them. Based on your statements I am concluding he was or still is an AT&T customer, that is one of the requirements of getting the device unlocked. -
Hi I can't able to use my wifi, I shows dim and I reset my network setting as well but still I am facing same problem. Can you please help me out
Your WiFI chip has failed. The phone needs to be replaced. Bring your phone and $199 to Apple for out of warranty replacement. If your phone is still under warranty, then the fee will be waived.
-
Up until about a month ago I was able to shrink my photos with shrink pic. I use yahoo for my emails and since they did an update I can no longer shrink my photos using Mozilla Firefox. I thought this was a yahoo problem but yesterday I tried Internet Explorer with yahoo and shrink pic is working in their format. Can you please help?
> I am running Windows 2000 and LabVIEW 6i which is some student version
> of LabVIEW. I have a AT-MIO-16E-10 DAQ card installed on this
> computer. MAX sees the DAQ and when I test it, everything works
> great. However, when I start a new VI, the Acquire Waveforms subVI
> will not work. There is one VI about 5 layers deep that says that the
> Code interface nodes and Call library function are not supported by
> this version of LabVIEW. Is there anything I can do to fix this
> problem? Please help!
It sounds like you are running the student edition which comes with a
textbook and doesn't support external code such as DLLs, CINs, or
ActiveX. You might want to check with others at your university and see
about getting access to an academic edition or a
full edition.
Greg McKaskle -
Hi previously i use personal hotspot,after updating my 6.1.3 ios in india iam not able to use that.It is in a default mode.
Can you please help me how to use personal hotspot.
Thanks,
Goutham.Im really good at programming but really suck at algorithms
>If your are 'really good' at programming, you will be able to solve this problem. Because, it has nothing to do with algorithm.
>>can someone please please write in a algorithm form for me , i need it by friday i would greatly be thankful for u
>Wrong person, in the wrong place. -
I payed for my creative cloud membership at 9.99/mo. I got it this morning. I was able to download Lr, but not able to download Ps. is asking me to pay again. Why is that, because I got the student packet deal. Can you please help.
Mariacazarez what is the exact error message you receive when you try to download and install Photoshop? For information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
gentlemen, i am not able to sync all my contacts on my iphone to Microsoft outlook. i have 396 contacts on my iphone and only 385 in my outlook. can you please help?
Hi Kinnera2740,
On the old phone go into Settings > Mail, Contacts, Calendars. Are there any email accounts listed here? Such as Google, Yahoo, Hotmail, etc?
If so, tap on each of them and check the 'Contacts' option. If it is turned on, this means that contact syncing is enabled for that account and that your contacts may already be synced to that mail account.
Also check Settings > iCloud and look for the 'Contacts' option. Is it enabled? If so, then it is possible that some contacts could be synced to your iCloud account as well. You can check to see which contacts are in which account by going to the Contacts app on your old phone and pressing the 'Groups' button in the top left corner. You may see several groups here. Uncheck all groups and then check each group one at a time to check and see how many contacts are synced to each account. You may need to add the same mail accounts to your new phone and enable contact syncing to have the contacts from the mail servers sync down to the new phone. -
Hello, The procedure above doesn't work. Regardless the options I choose, it doesn't allow to proceed without a credit card number. The option not to select a credit card is not there. Can you please help?
Read the steps in the support article from which you came carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
If you are certain you're following the steps exactly as given and are creating a new Apple ID and still have problems, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
HI
I have 2 IPads, I am unable to use one of it because I have forgotten my pass code and also logged out from iCloud accidentially. Can you please help me to solve this problem.
Cheers
RaveenaFollow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
-
I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you
Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.
-
Can you please help me figure out my i phone and how to use the features
i need some help on figuring out my phone can you please help me figure out how to use my i phone and the blue tooth features to listen to music or how can a friend or a relative send me songs for me to listen to.....
To listen to music with a headset or earbuds via bluetooth requires a bluetooth stereo headset.
File transfer via bluetooth is not supported. A friend or relative can purchase music for you via the iTunes music store with an iTunes store gift card or by sending you the music gift via email from iTunes. -
Can you please help me figure out what filter(s) to use to recreate this picture?
Hi Everyone!
I'm a student and not an expert in Photoshop. I'm trying to work over in After Effects using a Photoshop edited picture I was given (not separated in layers). However in order to give the image more movement I would like to recreate the picture, but have failed in figuring out which filters to use. Can you please help a student out? I would greatly appreciate it.!! (The first picture is the original, and the second one is the one I am trying to recreate) Thanks !Thanks for sharing that piece of information. I was only aware of creating posterized effects in Illustrator, though the
re is a posterize filter in Photoshop too. I'm learning as I post so bear with me. I find that providing a helping hand can't hurt unless you're way off base. In this case I guess I should have provided my suggestion as an alternative rather than stating that it could only be best done in AI.
-markerline
Maybe you are looking for
-
Is it possible for an Export plug-in to call another plug-in?
Hi, I have an automation plug-in that I want to appear in the 'Export' file menu. Is it possible to create an Export plug-in that doesn't do anything except call the automation plug-in? Thanks RR
-
"Mac OS X cannot be installed on this computer." New Hard Drive.
I have just bought a new Seagate Hard Drive and I want to install Mac OS X 10.5 on it. My MacBook is from the days of Tiger, but I have since upgraded to Leopard using the upgrade discs that Apple gave out. My next door neighbor has a brand new MacBo
-
Need a help to this but I can't find a specific community.
Hi Guys, I got some designs that I need to do a Mock-up on Responsive HTML5 (JUST MOBILE.. not desktop So I need to build something just for Phones and Tablets). I got all the screens on Photoshop. I need to get those designs and build a responsive p
-
I'm having trouble making my mapping to work. <oracle.dataaccess.client> <settings> <!--Un int correspond à un int32--> <add name="bool" value="edmmapping number(1,0)" /> <add name="int32" value="edmmapping number(9,0)" /> <add name="int32" value="ed
-
Hi I have modified some of the java file in large application, but now i have forgot which are all files i have modified. I am using CVS and eclipse IDE, how can i view edi