Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?

Take it back for a refund.

Similar Messages

  • I brought my ipad2 from Canada to Thailand,and put a sim card in to access wifi or 3 g, but cannot access internet is there anything I can do to fix this?

    I brought my ipad2 from Canada to Thailand and put a sim card in to access wifi and 3g, but I cannot get on the internet,is there anything I can do to fix this?

    Two things:
    1. Make sure the SIM card is enabled for data.
    2. Make sure you are using the correct APN settings, in Settings - Cellular Data.

  • Itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?

    itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?

    bradenfromwaikerie wrote:
    itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?
    because you do not have a 3rd generation device. The OS Version says so , otherwise you would be at 4.3.5 minimum and also Itunes is also always correct in determining if you have the latest OS ( if not it fetches the newest from Apple's Servers ) . And because a 2nd generation iPod stops at 4.2.1 you can't get the newest OS, because your device is old. Buy a new iPod , they have iOS5 preinstalled.

  • My iPod touch is stuck.  I can't get it to power off.  all that comes up on the screen is the Apple Logo.  Is there anything I can do to fix this problem?

    My iPod Touch is stuck.  I can't get it to power off.  All that comes up on the screen is the Apple Logo.  Is there anything I can do to fix this problem?

    You may need to hold the sleep/wake button and the home button until the apple logo appears. Or anther thing you can try is draining the battery until the battery is dead. That's what i tried and worked. You may need to do those things more than 2 times. OH anther thing is you can try connecting you ipod to your computer and see if it appears on itunes. If those don't work you can send it to apple. So that's what helped me I hope I answered your question.

  • After updating my iPod 4 and my iPhone 3gs to 5.1 it keeps turning itself off whenever I'm trying to load a larger web-page, or doing some hard operations. Is there anything I can do to fix this?

    After updating my iPod 4 and my iPhone 3gs to 5.1 it keeps turning itself off whenever I'm trying to load a larger web-page, or doing some hard operations. Is there anything I can do to fix this?

    Have yu tried the standard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Is there anything i can do to fix this problem?

    So i downloaded windows 7 onto my 2011 macbook pro and everything was working fine until i tried to open a program and it said i didn't have enough free disk space to run this program. i quit all of the problems i could on task manager and now when i go back to my homescreen i have nothing there,no start screen, no programs on my desktop all i can see is my screen saver is there anything i can do to fix this problem of do i need to reinstall windows?

    I don't think your use of " I downloaded Windows 7 " is being accurate.
    You have to burn the ISO and INSTALL Windows, create a partition and all the rest.
    And Windows 7 should have 40-60GB at least.
    How large a partition did you create when you set it up? how much is free now?
    F8 - safe boot to get in and you don't just need to quit but remove cache, temp, programs and more -
    Go To %TEMP% and delete everything
    uninstall what you don't need
    Download and run CCleaner 3.20
    Go to Disk C Properties : Disk Cleanup: System Files and remove everything there
    You can free up 4GB probably or more just from that.
    You should have 10GB or more free space for Windows
    chkdsk
    Paragon Camptune $20 can backup Windows image and resize HFS and NTFS partitions
    You should have backup or more of Mac HFS already - TimeMachine and say bootable drive partition on external drive.
    Real low space can prevent login to your account on startup.

  • My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

    I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?

    There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.

  • I've just upgraded to the Iphone update and now battery life of the poor is very poor (3 hours). Is there anything I can do to fix this?

    I've just upgraded to the Iphone (4) update and now battery life of the poor is very poor (3 hours). Is there anything I can do to fix this?

    there is wifi encryption password and appleID password and then your imap or pop3 password

  • Every time I close my Macbook Air and then go to use it again. My wifi is not connected, I have to go to the network diagnostics and basically find my network and reconnect every time. Is there anything I can do to fix this?

    Every time I close my Macbook Air and then go to use it again. My wifi is not connected, I have to go to the network diagnostics and basically find my network and reconnect every time. Is there anything I can do to fix this?

    worksafe's link with the KeyChain fix is good.
    This usually happens when KeyChain has two entries for the same WiFi network.
    If repair did not work you can follow the manual steps:
    Disconnect WiFi
    Open KeyChain from Applications / Utilities and find your WiFi network entry(ies) and delete all of them.
    Connect to your WiFi again.

  • HT203172 I get a long list of Permissions differ on "System/Library/CoreServicesRemoteManagement..." every time I verify disk permissions.  Is there anything I can do to fix this?

    I get a long list of Permissions differ on "System/Library/CoreServicesRemoteManagement..." every time I verify disk permissions.  Is there anything I can do to fix this?

    As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
    Permissions you can ignore on 10.5 onwards:
    http://support.apple.com/kb/TS1448
    Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
    Poster rccharles has provided this description of what it all means:
    drwxrwxrwx
    d = directory
    r = read
    w = write
    x = executeable program
    drwxrwxrwx
    |  |  |
    |  |   all other users not in first two types
    |  | 
    |  group
    | 
    owner
    a little more info
    Before the user had read & write. A member of the group had read.
    After, only the user had read & write.

  • HT201406 My 2nd generation ipod touch screen is not responding at all is there anything i can do to fix this?

    I let my cuzin borrow my ipod and when she gave it back the screen was not responding, my volume button is pushed all the way in and the lock button doesnt work very well. Is there anything i can do to fix it or anywere i can get it fixed?

    well unfortunatley your warranty is over so the device is not covered,  BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen).  You can try to restore your ipod to your computer to see if it might be some kind of software related issue.  Just restore to the last sync you have on iTunes.  But FIRST...I would try to Reset your ipod.
    Go to Settings>General>Reset> Reset all settings.

  • My MacBook Pro's USB ports will not work. Is there anything I can do to fix this?

    I bought it in late May of '12.  The USB ports stopped working a couple of months after I bought the computer. I did not spill anything on it or drop it.  I went in and had them fix it and they worked for about a month.  They will work occasionally and it takes me removing and entering the USB connector multiple times before it recognizes that anything is there.  The computer is no longer under warranty and I don't want to have to pay a bunch of money to have it fixed.  Is there anything that I can do to fix this or am I going to have to have someone else do it.

    Maybe a PRAM reset will work:
    http://support.apple.com/kb/ht1379
    If there is no change, bring the MBP to an Apple store genius bar for a free evaluation.  Bring the recalcitrant devices with you.  This should at least determine exactly where the fault lies, with the MBP or the externals.  Any repair costs quoted you may accept or reject.
    Ciao.

  • My ipod was sitting out in the heat covered and now doesn't work is there anything i can do to fix this?

    I was camping this weekend and left my ipod in the heat and now it does not work. is there any way i can fix this or do i need to send it in to get fixed'?

    - Try here first:
    iOS: Not responding or does not turn on
    - Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - It could be only the battery since high temperature can destroy the battery.
    - I would make an appointment at the Genius Bar of an Apple store to see what your options are.

  • I just got a used ipod and when i go to turn it on it gets to the apple logo for about 10 seconds then shuts off. is there anything i can do to fix this or am i out of luck?

    i have tried the whole menu an lock button trick but it still wont turn on past the apple logo.

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Maybe you are looking for

  • Null Pointer exception returned when object is not null!

    I've isolated the problem and cut down the code to the minimum. Why do I get a null pointer exception when the start method is called, when the object objJTextField is not null at this point???? I'm really stuck here, HELP! (two small java files, sav

  • Replication of pricing routiens from R/3 to CRM

    dear Experts, We have created pricing procedure in ECC and we have used a pricing Routine for calculation purpose and assigned it to our Condition Type. As our leading system is CRM we have downloaded the pricing procedure from ECC to CRM using DNL_C

  • How to save data in file by puting the data in different colomns ?

    I am compiling a program by using Labview, and I use the 5 loops. For every loop, I get 10 data. I want to save all data in a file. But I don't want put them in one colomn, and just want to put the data getting from one loop in a colomn, and thus in

  • HT201401 My Iphone is on silent and i cannot get it off

    My I Phone is on silent mode i  cannot get it turned off

  • Launchd and Pathstate errors

    Hi, I've been playing around with launchd but I end up getting some errors when I use the pathstate parameter. This is my plist : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/P