Hello i have a imac 8.1 and my volume down button stopped working..

hello i have a imac 8.1 and the volume down button stop working..
basically it seems that the f11 button is dead cause i can't make shortcut to this button anymore..
i had the maverick osx and i install some vst for ableton before that happend but i make format the disk and clean install the osx lion and it doesn't fix the problem.. any help ??

Very simple take it to an Apple Store or AASP and have it professionally diagnosed. Anything else would be guessing. Do NOT spend a penny on it until it is professionaly diagnosed otherwise you stand and excellent chance of throwing good money after bad.

Similar Messages

The silent/ringer switch and the volume control buttons stopped working, how can I fix this or do I just need to get a new phone?

One day I relalized that the silent/ringer switch on my iPhone 4 stopped working. My phone is permently silent and I can't turn the ringer on. The speakers still work so they aren't the problem. Also, the volume controls on the side don't work either. Is this problem fixable or do I need to get a new phone?

you can try the restore first to make sure it is nothing software related. makesure to back up information and restore as new. after that it is hardware if your with in the limited hardware warranty and can be replaced for free if you are not then it can be replaced for 149$ if it is a iphone 4 or lower

Hello I have a imac G5 17" and it will not boot up.

Hello, I have a imac G5 17" and it will not boot up...... There isn't any chime when you turn it on and the led light will come and fade out a little but will stay on and the screen will stay black. Does any one have any suggestions on what's wrong and how to fix it?
<Re-Titled By Host>

The bottom of that article says to contact an authorized service technician. You may also find that simply replacing the PRAM battery (the coin shaped battery) helps. Note: if you have any capacitors that are labelled X on their top (as opposed to just K), you may have the problem of the leaking capacitors which required a power supply and/or logicboard replacement. The leaking capacitor was an industry wide problem.

I dropped my Iphone in water and the on/off button stopped working, how do I fix it?

I dropped my phone in some water and it was only in there for about two or three seconds. I grabbed it and dried it straight away and made sure to get in all of it, and it was fine, everything worked. But about an hour after the on/off button stopped working, so i have to use the home button to unlock it and have to wait for the screen to turn off after 1 minute of leaving it. I cant turn it off and dont know how to fix it. Will it go away on its own, do I have to send it off to get fixed? This literally happened like two hours ago, and my phone is a bit more than a year old. Can anyone help me?

Make an app;ointment at the genius bar and take your credit card. You can get an out of warrnty replacement for an iPhone 4 for $149.
If you had just done it, the advice would have been to shut it off and put it in a bowl or bag of uncooked rice or silica gel for a week. Unfortunately, since it's been powered on for several hours, since then, it may have been permanently damaged. You can try the rice trick, but be prepared to pay for a replacement at some point down the road.

Why have my App Store, iTunes, and my Google related apps stopped working properly?

I was on my iPod and soon figured out that iTunes and Google-related apps weren't working. iTunes kept telling me I 'might be on a server pretending to be iTunes' and won't let me use it. When I open the App store, it tells me that it cannot connect to iTunes. Also, any apps I have that are Google related are on the fritz. My Google Drive won't allow me to view my documents, write new ones, or rename them. It says I'm not connected to the Internet... but I am. Google Translate, YouTube, or my Google Search app weren't working as well. Also having slight issues with Safari but they fix themselves after a moment. I'm not sure what's going on with my apps and I haven't checked other apps for issues so I'm not sure if it's all apps. This started happening after I deleted Spotify. I'm sure it has nothing to do with my app issues but it might be worth mentioning. So what's going on and have any of you had this problem before?

Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
then
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

HP Pro Tablet 608 - Windows 10 - Power and Volume hardware buttons stopped working - Driver Issue

I upgraded my newly received HP Pro Tablet 608 to Windows 10 and now the power and volume buttons don't work anymore. The single press of Power button doesn't turn off the screen or put the tablet to sleep, plus the Volume button doesn't do anything either. I noticed that there are two drivers in the Device Manager that have errors:1) GPIO Buttons Driver (msgpiowin32.inf)2) HID Button Over Interrupt Driver (hidinterrupt.inf) I have tried disabling and enabling and updating driver software (it says they are up-to-date) but to no avail. I also Refreshed the PC but still have the same issue. I used the "Hardware and Device troubleshooter" and it worked, until I restarted the tablet and then it stopped working again. And now even the Troubleshooter is not able to fix it anymore. Disabling the Windows Defender didn't help either. Under the Driver properties for both "GPIO Buttons Driver (msgpiowin32.inf)" and "HID Button Over Interrupt Driver (hidinterrupt.inf)", under Device status I get the message "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system". Does this provide a clue on how to fix this? I am getting very frustrated with these issues with the tablet, and hoping for some help before my return window for the tablet runs out. Please help!

Hey @cjdean1983 ,
Welcome to the HP Forums!
I understand the touch screen has stopped responding on your Omni 10 tablet.
If you have already performed a recovery and BIOS update the only option I can provide is to contact phone support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

TS3474 My ipod will not start even after holding down the Sleep/Wake button and the Volume Down button for at least eight seconds. What is my next step?

I have a sixth generation ipod 16gb nano. It will not turn on. I have tried hoding down the power button with the down volumn button without results.
Any other suggestions?

i have the same problem...my ipod is 4th generation?uggghhhhh

"Tab" and "four" buttons stopped working

Hi,
I was using my computer, a black Macbook bought in summer 2006, and suddenly the "tab" button and the number "four" button stopped working. Don't think I pressed anything unusual, was just on safari, and all the other numbers work, and num lock is not on. help... plz?!

Hi, I ran software update and then restarted, that seemed to do the trick! I was in a a panic for a little while there tho, things have been going wrong pretty often with this computer so i was thinking it was done for... anyways, thanks for the quick reply and suggestions!!!

HT1459 my 6th gen nano stopped working and is not recognized by my computer or in itunes. I tried rebooting with directions, it still doesn't work. I've tried pluggin into power source and pushing the on off button with the volume down button- this doesn'

My 6th gen nano ipod stopped working. I figured it was because it was next to my sweaty body, so put it in rice. I sought help from internet and tried all of the troubleshooting steps; i.e pushing down the power button and the volume down button consecutively, plugging it in to a power source, waiting 10 minutes and pushing the buttons while it was plugged in. Nothing has worked thus far. Is there anything else that I can try?

Hi there Betsyell,
You may find the troubleshooting steps in the article below helpful.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
-Griff W.

I have an iphone4 that I've had since April, but recently the lock button stopped working, help please??

I've had an iphone4 since April and recently the lock button stopped working, I was wondering since I hadn't had it for a year if it could get fixed for free

ONly way to find out is to go to your nearest Apple store and talk to the people at the genius bar.

Hello I have an imac with os x 10.7.5 and I have some doubts: the new version of garageband 10.0.2 is compatible with os x 10.7.5?

Hello I have an imac with os x 10.7.5 and I have some doubts:
the new version of garageband 10.0.2 is compatible with os x 10.7.5?
I have not installed mavericks. should I install?
Thanks!!

It requires 10.9 or later.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Hello I have a IMac OS X 10.9. 4 serial number is: YM*****ZE2 and I can not install the admin password I have tried the system and typed: appeared what I do?

Hello I have a IMac OS X 10.9. 4 serial number is: YM*****ZE2 and I can not install the admin password I have tried the system and typed:
root # mount -uw/
launchctl load /System/Libary/LaunchDaemons/com.apple.Directoryservice.plist
appeared: launchctl: Couldn´t stat(''/Sytem/Libary/Launchdaemons/com.apple.DirectoryServices.plist''): No such file or directory
ls /User
decl . -passwd/Users/usarname password
appeared:operation failed with error: eServerError
What I do?
<Edited by Host>

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop

hello i have a imac and i want to install cs6 photoshop and i keep getting installation failed indicating i have a conflicting version must be removed before installing the current media. I have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks

teddyscroggins wrote:
…have deleted everything related to above and previous photo shop files i could think of, could you please help out with this. thanks
That is precisely the WRONG thing to do. You should never delete, but uninstall.
Now you need to look for, download and run the Adobe CS Cleaner tool.

I have an iMac, iPad 2 and one child has an iTouch and the other an iPhone 4S. How do we get separate facetimes?

Hello, I have an iMac and an iPad 2. one of my kids have an iTouch and the other an iPhone 4S.
When their friends call, it shows up on my iPad 2 and the list of friends is the list of friends for my child
who has the iPhone 4S. To my knowledge, we all have to share an APPLE ID to share music and apps?...
So is that the problem....what happens if we have separate APPLE ID's....?
Even though we are an APple fam, I am still not sure how the whole thing works....
How do we get separate facetimes? Thank you so much in advance.

Actually you can have separate apple ID's for icloud and facetime but use the family one for purchases so you can share your apps, music..
Each owner opens up a Apple ID for only their device(s).. Log into icloud using new apple ID on each device for each person. Hit facetime in settings, and input your new apple id as facetime ID.. Done..
Now go to settings > store and make sure your family account is inputed there on all the devices so you can share your purcahsed music, apps, videos, etc....
I am sharing purcahses with my entire family but we all have separate icloud, facetime, apple ID etc.. Its imperative you have split Apple ID's for icloud otherwise all your phonebooks will mix and match.....
Also as far as iphone goes.. Iphone can be set up to use apple ID to call or phonenumber (by default) So if you facetime a number it will ring only on that phone, if you facetime an apple ID that is on the iphone it will ring on all devices associated with that apple ID

Hello , i have an IMAC with OSX10.9 , impossible to send a mail with a attach file , thank you for your help

Hello ,
i have an IMAC with OSX10.9 , Safari 7.0 and a mail gmail , so it is impossible to send a mail by apple mail with a file attachment ( ex pages ) , no probeme without file
this problem began yesterday
thank you for your help

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

Hello i have a imac 8.1 and my volume down button stopped working..

Similar Messages

Maybe you are looking for