Hello, I have a Sony GV D300E mini DV editing deck.MY imac latest I7 model does not see it when I plug it in via firewire to usb, any help please.
My iMAC i7 will not see the device, it is from firewire to usb.
Any help please.
The connection on the player is firewire
You need the following:
Apple Thunderbolt - Firewire adapter
4-pin to 9-pin Firewire cable like this one
No software drivers are needed.
No icon will appear on your Mac desktop when the deck is connected. You need to use video capture software such as iMovie, Final Cut, etc. in order to "see" and use your Firewire deck. (I believe QuickTime Player will also "see" your deck and allow playback.) You will probably have to use the manual controls on the deck to control actual playback start & stop.
I have recently bought a cable,firewire one end and USB on the other
Hard to believe there is such a cable. If there is such a cable, it's a scam. Firewire and USB are totally different, electrically and protocol-wise. Even if there is such a cable, it will not work for connecting your miniDV player to a Mac. miniDV (video) has always been a Firewire-based connection. Sony calls Firewire "i.Link"
Similar Messages
-
Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please? I'm running Mavericks
Thanks for your help Brij011 - much appreciated. Apologies as I'm a newbie but I've looked at the info for synching and I appear to have all the switches flicked on my iPad. Does the iPad and iBooks only sync in iCloud for purchases as I appear to be doing something wrong. I could sync ok when books was in iTunes but since migrating to Mavericks I think I'm doing something wrong!!
-
Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?
Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! -
I have the product key, but I cannot see where to reload it. I shouldn't have to buy the product again.
Photoshop version?
-
Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks. -
I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?
tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port. -
Have a Sony CX350V HandyCam. iMovie 10.0.2 doesn't recognise it, neither does iPhoto 9.5.1 so what can I do?
You may be better off posting or looking for answers in the i photo community forum
and in the "More like this to the right of the page"
https://discussions.apple.com/community/ilife/iphoto -
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..
Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window. -
Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied any one has a solution?? please...
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it it says it has been installed. But where do I see the application that it is there?
Check your system preferences.
My copy of flash installed as a preferance pane.
If its there you will be able to check the current installed version and set preferences for flash and updating. -
hello, I have a problem with my iPad I actually forgot my password on my ipad, but I still remember the Apple ID and password, I will like you to help me find my password. thank you for your understandingu
deForgot passcode
http://support.apple.com/kb/ht1212 -
Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please
You have to back them up to a computer. You would import them either to iPhoto or to the Photos app in your PC:
http://support.apple.com/kb/ht4083
Cheers,
GB -
hello, i have i phone 5 and i forgot my passcord,and i ender wrong passcord several time and now when i on my phone the error is come iphone is disable try after 225,556.550 minutes.what i do tell me,,
This is the problem
You need to force restore the device, you cant wait that long because well..
But yeah do what peter be saying and you should be good 2 go -
hello i can't finish my review on my phone because i don't have a bank card so i don't what to do any help please?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Editing SystemExec.vi to wrap up a program
Hi there, I'm just full of questions today. I'm using SystemExec.vi to run a small, DOS-based external program. I then take the output that's sent to the console and manipulate it a bit. The problem is, the external program I'm executing does somethi
-
Can 2 different iphones share the same apple ID?
Can my husband who just got a I phone use my apple ID? He wants to get our Itunes from the computer on his phone.
-
Ipod Nano - Movies and Wheel Questions
1. I just purchased the 16GB Ipod Nano and within two weeks the wheel stopped working. I reset the software via iTunes and also by holding down the menu and select button. Nothing worked. Now I'm waiting for a replacement from the store as they were
-
hi all, I am trying to set accelerators to JMenuItems. I am using language english ,german. I have created to property files with english and german. if i get accelerator value as shft s,control n..finally it is showing Umschalt s and Strg n. i am us
-
hi experts, When I copy a project from another operative project with list of material (external), the plant (in the material component) tab is also copied over to the new project. Is there any way that I could change this plant assignment for each m